双核双配体稀土配合物Tb1-xEux(TTA)3Phen的合成及光学性能研究

合成了系列铕铽双核稀土有机稀土配合物Tb1-xEux（TTA）3Phen，通过差热．热重分析、XRD、红外光谱、紫外光谱和荧光光谱等测试手段研究了配合物的组成、结构和发光性质。由紫外可见光谱可以看出，稀土有机配合物的吸收峰主要来自有机配体HTrA和1，10-Phen；差热-热重分析证明，稀土有机配合物热稳定性较好。荧光光谱和电致发光表明，铽对铕配合物的发光有协同作用。在该系列配合物中，不仅有机配体可以将吸收的能量传递给发光的铕离子使其发光，而且铽离子也可将其吸收的能量通过分子内能量传递给铕离子，增强铕的发光强度。同时就双核稀土有机配合物光致发光和电致发光的特性及掺杂体系的能量传递过程进行了讨论。     

稀土烟酸与8-羟基喹啉三元配合物的合成、表征及荧光光谱

合成了 4种稀土烟酸 (HL)与 8 羟基喹啉 (Hhq)的三元固体配合物 ,对它们进行元素分析 ,确定其通式为REL2 ·hq·2H2 O (RE =La ,Eu ,Tb ,Dy) ,用摩尔电导、TG DTA分析、IR、UV和荧光光谱等研究了配合物的有关性质。结果表明 ,烟酸脱掉羧酸上的质子以酸根的形式与稀土离子呈双齿配位 ,而吡啶环上的氮原子未参加配位。hq- 的羟基氧和杂氮原子与RE3+ 离子配位。配体与稀土配位后 ,配合物中稠环数目增多 ,π键共轭程度增大。配合物中所含的水可能为配位水。荧光光谱研究发现 ,La和Dy的配合物的荧光表现为配体的荧光 ,Eu配合物中心离子的特征荧光峰表现不明显 ,而Tb配合物中配体能有效地将吸收的能量传递给Tb3+ ,敏化Tb3+ 的发光 ,发射较强荧光     

三价铕和铽配合物在溶液中发光性能的研究进展

综述了近十余年来的一些β-双酮类、苯并咪唑类、苯甲酸类、吡啶类、大环类配体与三价铕(Eu3+)和铽(Tb3+)形成的配合物在液相体系中的荧光性能。其中,重点关注了衡量配合物的荧光性能的最重要的两个标准即量子产率和荧光寿命。文中也总结了在设计和合成优良配体时应该遵循的一些原则:如配体与稀土离子能级要匹配、将溶剂分子排斥出稀土离子配位,最大程度地消除光猝灭因素和无辐射去活化作用而改善光物理性能等,以期得到高的量子产率和长的荧光寿命的稀土配合物。     

稀土(铕、铽)配合物中荧光性能相互影响

以5-磺基水杨酸、α-噻吩甲酰三氟丙酮为小分子配体,以溶液聚合制备的甲基丙烯酸甲酯和丙烯酸共聚物(PMMA-AA)为高分子配体,合成了一系列铕、铽的高分子配合物,并通过UV、IR和元素分析对其结构进行了表征。用荧光分光光度计研究了它们的荧光性能及铕、铽之间的荧光性能的互相影响规律,讨论了它们的荧光发射峰位、荧光发射强度与组成的关系。实验结果表明,在稀土(铕、铽)多核高分子荧光配合物中,Eu3 与Tb3 之间的荧光光谱有相互敏化或猝灭的作用。其中Eu3 对Tb3 的荧光有很强的荧光猝灭作用,且在n(Eu3 )∶n(Tb3 )=1∶1时,Eu3 对Tb3 的荧光猝灭作用最大;Tb3 在低浓度n(Eu3 )∶n(Tb3 )大于1∶1时,Tb3 对Eu3 的荧光有猝灭作用,Tb3 在高浓度n(Eu3 )∶n(Tb3 )小于1∶1时,Tb3 对Eu3 的荧光有很强的敏化作用。     

Si_5P_6O_(25)∶Tb~(3+)的结构与荧光性质

近年来，掺稀土离子发光材料的研究引起了人们的极大兴趣，已经制备出各种有应用价值的掺稀土发光材料，如掺Tb３＋的三基色发光粉等。由于稀土离子的发光极易受基质的影响，且在不同基质中稀土离子的发光强度不同。所以人们的研究重点集中在改变基质材料上，以减少昂贵稀土的掺杂量，从而提高稀土的发光强度。Tb３＋能发射特征的绿色荧光，其发光强度高，量子效率高，所以围绕铽合成不同基质的发光材料一直是人们所感兴趣的研究课题。ZhangH．X．等犤１犦制备了掺杂Tb３＋、Eu３＋的Zn２SiO４体系发光材料，该材料像广泛应用于电视和C…     

铕、铽2,6-二甲酸吡啶、α-甲酸吡啶络合物的研究

近年来,稀土络合物的发光引起了人们的重视。Yamazoe等报道了R-CH=CH-COO~-类及β-羧酸吡啶铕、铽络合物的发光性能。山添等报道了α-甲酸吡啶铕、铽络合物的摩擦发光。本文制备了铕和铽的2,6-二甲酸吡啶络合物Na_3[Ln(DPA)_3]·NaCl·_3H_2O和α-甲酸吡啶络合物Ln(DPA)(PA)·1.5NaCl·3H_2O(Ln=Eu、Tb;DPA=2,6-二甲酸吡啶酸根;PA=α-甲酸吡啶酸根),并测定了络合物的红外光谱和荧光光谱。     

铕-铽-钆-六氟乙酰丙酮三元配合物的合成与温敏发光性质

合成了铕-铽-钆-六氟乙酰丙酮(HFA)三元配合物Eu0.4Tb0.4Gd0.2(HFA)3(TPPO)2(TPPO: 三苯基氧化磷), 其组成和结构经元素分析和红外吸收光谱确认; 研究了三元配合物的发光性能, 以及铽、钆离子对铕离子发光性能的影响. 结果表明, 配合物中存在着声子支助的Tb3+→Eu3+的能量转移, 增强了Eu3+离子的室温特征荧光发射, 且样品的发光颜色随温度的改变而变化, 具有温敏特性.     

芳香酰胺型开环冠醚稀土配合物及其荧光性质研究

合成了新的以水杨酰苄胺为功能端基的开环冠醚1,7-二(2'-苯甲酰苄胺)-1,4,7-三氧杂庚烷(L)有机配体及其硝酸铕和硝酸铽的配合物.利用元素分析、电导、红外光谱对配合物进行了表征,结果表明两个配合物均符合23(RE(NO3)3L)的化学计量比.此外还初步研究了铕、铽配合物在室温下的固体荧光性质,结果表明虽然配体保持了苯羰基共轭结构对铕、铽离子的敏化发光性质,两个配合物均能表现出一定强度的特征荧光,但是配体向Tb(Ⅲ)的能量传输效率明显要强于Eu(Ⅲ).     

新型稀土Eu,Tb(Ⅲ)芳香羧酸配合物的合成及发光性能

以2-二苯胺羰基苯甲酸(L)为第一配体,咪唑并[5,6-f]邻菲罗啉(IP)为第二配体,合成出新型稀土铕、铽三元配合物。采用元素分析、红外光谱、紫外-可见光谱对配体和配合物的结构进行了表征。红外光谱分析表明配合物中的稀土离子与第一配体L中的氧原子以及第二配体IP中的氮原子进行了配位。紫外光谱表明配合物主要是由第一配体L吸收能量。通过荧光光谱、荧光量子效率和荧光寿命研究了配合物的荧光性能,结果显示:两种配合物均表现出稀土离子的特征发射,且配合物的荧光量子效率和荧光寿命与发光强度成正比,配合物Tb(L)3IP的各项荧光性能均优于Eu(L)3IP。     

新的稀土Eu,Tb(Ⅲ)β-二酮三元配合物的合成与光谱性质

采用Claisen缩合反应合成了一种β-二酮1-(4-氨基苯)-3-苯基丙烷-1,3-二酮(L:C15H13NO2),以元素分析和1H NMR谱确定了其组成,核磁和红外分析结果表明L主要以烯醇式存在。以L为第一配体,分别以邻菲罗啉(phen),2,2’-联吡啶(bipy)为第二配体,合成了新的稀土Eu,Tb(Ⅲ)三元配合物。通过元素分析、红外光谱、紫外光谱、磷光光谱和荧光光谱对合成的配合物进行了表征。荧光光谱表明:稀土铽配合物的发光性能优于稀土铕配合物,进一步研究表明配体L与Tb3+间能级差较匹配,分子内传能效率高;phen对配合物的荧光敏化效果优于bipy,表明第二配体的刚性和共轭性越大,配合物的发光性能越好。     

Photoactive Ternary Rare Earth Complex Hybrids with Sulfoxide Functionalized Silica and PMMA (or Phen)

A series of ternary rare earth complexes were covalent grafted to the inorganic Si–O networks through the novel bifunctional silylated monomer BBMSSi (BBMS = Bis [benzoylmethyl] sulfoxide). FT–IR, NMR, XRD, TGA, SEM, DRS and photoluminescence properties were used to characterize the obtained hybrid materials. Scanning electron micrograph results revealed hybrids exhibiting homogeneous morphology with large particle size of 100–200 μm and no phase separation. Photoluminescence measurements indicated hybrids with characteristic red and green luminescence. In addition, the existence of the polymeric chain PMMA and 1,10-phenanthroline in different hybrid systems present different microstructure and luminescence behavior.     

Multi-walled carbon nanotube-based ternary rare earth (Eu3+, Tb3+) hybrid materials with organically modified silica-oxygen bridge

A series of ternary rare earth (Eu(3+), Tb(3+)) complexes are covalently coated to the 3-aminopropyltriethoxysilane functionalized multi-walled carbon nanotube (MWCNT) by a simple in situ sol-gel method by the bifunctional silylated monomer TTA-Si and TAA-Si (TTA-Si and TAA-Si are 3-(triethoxysilyl)propylisocyanate (TEPIC) modified thenoyltrifluoroacetone (TTA) and trifluoroacetylacetone (TAA), respectively). The resulting materials are characterized by Fourier transform infrared spectra, scanning electronic microscope, transmission electron microscope, thermogravimetric analysis, ultraviolet visible diffused reflection measure, photoluminescence spectra, and X-ray diffraction. The photoluminesce measurements indicated that these hybrids exhibit characteristic red and green luminescence originating from the corresponding ternary rare earth ion (Eu(3+), Tb(3+)). The luminescence quenching effect of MWCNT networks have been successfully restrained by coating a relatively thicker silica-oxygen-based organic-inorganic complex. Furthermore, the fluorescence lifetimes and emission quantum efficiencies of Eu(3+) hybrid materials are also determined.     

SYNTHESIS AND POLYMERIZATION OF 2-OXO-3-METHYLENE-5, 6-DIPHENYL-1,4-DIOXAN

A new cyclic monomer, 2-oxo-3-methylene-5, 6-diphenyl-1, 4-dioxan, was synthesized. Thestructure of the intermediates and the monomer were determined by IR,~1H NMR,~(13)C NMR andelemental analysis. This new monomer is different from other cyclic monomers in this series,it isa solid (mp 108--109℃)and not very reactive, but still can undergo free radical ring-openingpolymerization. The free radical polymerization was carried out at 130℃. The structure of theresulting polymer was discussed and charaterized by IR, ~1H NMR, ~(13)C NMR and elementalanalysis. The molecular weight of the polymer was estimated by viscosity determination.     

Characterization of modified silica powders by fourier transform infrared spectroscopy and cross-polarization magic angle spinning NMR

Silica gel and Cab-O-Sil were chemically modified (silylated) with 3-aminopropyltriethoxysilane and 3-methacryloxypropyltrimethoxysilane under carefully controlled conditions. Subsequently the products were investigated by elemental analysis, Fourier transform IR spectroscopy, and ¹³C and ²⁹Si cross-polarization magic angle spinning NMR (CP-MAS NMR). The influence of the reaction conditions of the silylation and the effect of subsequent heat treatment and water addition were studied. The resulting differences shed new light on the combined effects of reaction conditions and silica surface structures on the course of the reactions. Some assignments of ²⁹Si NMR signals to specific structures were confirmed, while in one case a reassignment was proposed.     

Synthesis and luminescence properties of spherical bridged polysilsequioxanes activated by lanthanide ions

Luminescent microspherical bridged polysilsequioxane were prepared by heating the mixture of lanthanide ions (EuCl₃ or TbCl₃) and bis-silylated bipyridine having dual roles, i.e. the bipyridine moieties can sensitize the luminescence of Eu³⁺ (or Tb³⁺) ions and the alkoxysilane substituent can be hydrolyzed and condensed via sol–gel process to create inorganic silica framework. The obtained microspheres were systematically investigated by IR spectroscopy, scanning electron microscopy, absorption spectroscopy, PL excitation and emission spectroscopy. IR spectra indicate that the silylated bipyridine has been hydrolyzed under the reaction conditions. SEM images show the microspherical morphology of the luminescent materials. It has been confirmed that the strong luminescence of the spherical bridged polysilsequioxanes is due to the effective energy transfer from the silylated bipyridine to the chelated lanthanide ions.     

聚硅氧烷侧链液晶高分子的合成与表征

研究以对－烯丙氧基苯甲酸对－氰基苯酚酯为单体的聚硅氧烷侧链液晶高分子的合成方法。首先利用Williamson反应生成醚、羧酸酰化、酯化反应得到单体,然后利用硅氢化反应将单体接枝到聚甲基氢硅氧烷上得到目标产物。用IR,NMR及热台偏光显微镜等方法对单体和聚合物进行了结构表征和液晶行为分析。优化了对－烯丙氧基苯甲酸对－氰基苯酯为单体的聚硅氧烷侧链液晶高分子的合成工艺条件,提高了产率。样品表征结果证明单体和聚合物均呈现近晶液晶相,为特殊功能材料提供了原料。     

水溶性纳米Fe3O4-阿魏酸抗凝血材料的合成及性能

为提高具抗凝血性能的阿魏酸分子在水中的溶解性进而提高其药效,利用DBI(3,4-二羟基苯甲醛)、PEG(聚乙二醇4000)和纳米Fe₃O₄,采用接枝的方法制备了水溶性纳米Fe₃O₄-DBI-PEG-阿魏酸抗凝血杂化材料,用IR、¹H NMR、TG、SEM、TEM、VSM和粒度测试方法表征了产物。结果表明阿魏酸(FA)接枝在了经过DBI-PEG活化后的纳米Fe₃O₄氧化物表面。杂化材料具有良好的水溶性(溶解度大于10 mg·mL^-1)和顺磁性。抗凝血试验表明相同条件下杂化材料的抗凝血时间和复钙时间比阿魏酸要长,杂化材料的活化部分凝血活酶时间(APTT)和凝血酶原时间(PT)比空白组要长,杂化材料的抗凝血时间随浓度的增大而延长。     

水溶性纳米Fe3O4-阿魏酸抗凝血材料的合成及性能

为提高具抗凝血性能的阿魏酸分子在水中的溶解性进而提高其药效,利用DBI(3,4-二羟基苯甲醛)、PEG(聚乙二醇4000)和纳米Fe₃O₄,采用接枝的方法制备了水溶性纳米Fe₃O₄-DBI-PEG-阿魏酸抗凝血杂化材料,用IR、¹H NMR、TG、SEM、TEM、VSM和粒度测试方法表征了产物。结果表明阿魏酸(FA)接枝在了经过DBI-PEG活化后的纳米Fe₃O₄氧化物表面。杂化材料具有良好的水溶性(溶解度大于10 mg·mL^-1)和顺磁性。抗凝血试验表明相同条件下杂化材料的抗凝血时间和复钙时间比阿魏酸要长,杂化材料的活化部分凝血活酶时间(APTT)和凝血酶原时间(PT)比空白组要长,杂化材料的抗凝血时间随浓度的增大而延长。     

SYNTHESIS AND FREE RADICAL POLYMERIZATION OF 2-OXO-3-METHYLEN E-5-PHENYL-1,4-DIOXAN

The novel cyclic monomer, 2-oxo-3-methylene-5-phenyl-1,4-dioxan, was synthesized by a set of reactions. Several intermediates were prepared and characterized in order to determine the monomer structure. The presence of chiral centers in the intermediates and resulting monomer makes it complicated to separate , purify and characterize them. It is a very reactive monomer which will polymerize even at room temperature if expose to moisture and air. This monomer can undergo essentially quantitative flee radical ring opening polymerization. The driving force for ring opening is the formation of new carbonyl group and benzylic radical. The monomer and polymer structure were established by IR, ~1H NMR, ~(13)C NMR and elemental analysis or high resolution mass spectrum. The molecular weight of the resulting polymer was estimated by viscosity determination.     

新型螺环单体的合成和自由基聚合反应的研究

新型螺环单体的合成和自由基聚合反应的研究王宏鲁剑涛冯品珍（中国科学技术大学研究生院化学部北京１０００３９）关键词自由基聚合，新单体合成，螺环单体，自由基共聚虽然离子型开环聚合早已为人熟知，但是自由基开环聚合反应的研究和应用开发还刚刚起步．...