The gelation of hydroxypropyl guar gum by nano‐ZrO2

In the study, hydroxypropyl guar gum (HPG) gel is prepared by using Nano‐ZrO₂ particles as the cross‐linking agent. The Nan‐ZrO₂ particles are prepared by using oil‐water interface method. The physical properties such as morphology, particle size, and crystal structure of the Nano‐ZrO₂ particles are analyzed by SEM, particle size analyzer, FT‐IR, and XRD, respectively. The results show that the Nano‐ZrO₂ particles are spherical particles with a little agglomeration; these spherical particles have a tetragonal structure and higher crystallinity, and the mean diameter of the first‐level grain is 24 nm. The rheological properties including shear stress, complex modulus, elasticity modulus (G′), and viscosity modulus (G′′) of the Nano‐ZrO₂ cross‐linked HPG gel are investigated. The results show that the Nano‐ZrO₂ cross‐linked HPG gel is a pseudo‐plastic non‐Newtonian fluid with higher elastic modulus (G′ > G′′) and lower tanδ (tanδ < 1, the ratio of viscous and elastic modulus), which indicate that the Nano‐ZrO₂ cross‐linked HPG gel may have potential application in fracturing.     

Photocatalytic activity of ZrO2 nanoparticles prepared by electrical arc discharge method in water

ZrO₂ nanoparticles were synthesized through arc discharge of zirconium electrodes in deionized (DI) water. X-ray diffraction (XRD) analysis of the as prepared nanoparticles indicates formation a mixture of nanocrystalline ZrO₂ monoclinic and tetragonal phase structures. Transmission electron microscopy (TEM) images illustrate spherical ZrO₂ nanoparticles with 7–30 nm diameter range, which were formed during the discharge process with 10 A arc current. The average particle size was found to increase with the increasing arc current. X-ray photoelectron spectroscopy (XPS) analysis confirms formation of ZrO₂ at the surface of the nanoparticles. Surface area of the sample prepared at 10 A arc current, measured by BET analysis, was 44 m²/g. Photodegradation of Rhodamine B (Rh. B) shows that the prepared samples at lower currents have a higher photocatalytic activity due to larger surface area and smaller particle size.     

Hydrothermal synthesis and phase stability of Pb stabilized ZrO2 nanoparticles

The Pb doped metastable tetragonal ZrO₂ (t-ZrO₂:Pb) nanoparticles have been successfully synthesized by hydrothermal method. Pb ion doping has great effects on the phases, crystallite sizes and optical band gaps. Systematic structural characterization revealed that the introduction of Pb ion results in lattice expansion. The as-prepared t-ZrO₂:Pb with ca 4–6 nm in size has high specific surface area (>150 m²/g) and narrow particle size distributions. The diffuse reflectance spectra investigated that the band gap shifts from ultraviolet (E_g = 5.19 eV) for pure ZrO₂ to the visible region for t-ZrO₂:Pb and the gap can be effectively adjusted with the content of Pb in nanocrystals. Through thermal treatment, Pb ion doped in ZrO₂ crystals was excluded with increasing temperature. At 800 °C, the three t-ZrO₂:Pb samples of ZPO-2, ZPO-3 and ZPO-4 still contained the pure tetragonal phase, in which Pb content were not reduced to zero, while the transformation from tetragonal to monoclinic phase occurred due to zero Pb content in ZPO-1. The reason to this transformation and stabilized mechanism of Pb ion in ZrO₂ were discussed.     

Studies on Chitosan modified ZrO2–CeO2 metal oxide and their Photo catalytic activity under solar light irradiation for water remediation

Chitosan modified CeO₂/ZrO₂ were prepared by co-precipitation method and its photocatalytic activity was studied while exposed to solar light. Various doping concentrations was evaluated and 30 mol % CeO₂/ZrO₂ doping concentration enhanced higher activity when it was modified into Chitosan employing Orange G dye as a model pollutant while exposed to sun light. The synthesized catalyst was highly crystalline, and its average crystalline size was found to be 30 nm using X-ray diffraction analysis. Structural morphology, functional groups, thermal decomposition temperature and particle size were confirmed by Scanning Electron Microscope (SEM), Fourier Transform-Infra Red, Thermal Gravimetric Analysis and Transmission Electron Microscope analysis. XPS confirms the band alignment and oxidation states of the synthesized photo catalyst. In accordance with the UV-Diffused Reflectance Spectrum, the band gap energy is 2.9 eV. The enhanced photo catalytic activities of the prepared photocatalyst were confirmed by effect of catalyst, effect of dye concentration, effect of electrolytes, kinetics and COD. The reaction follows first order kinetics, and the pseudo first order rate constant was evaluated from the kinetics plot.     

Synthesis, characterization and thermal analysis of polyaniline/ZrO2 composites

Conducting polyaniline-zirconium dioxide (PANI/ZrO₂) composites were synthesized by ‘in situ’ deposition technique in the presence of hydrochloric acid (HCl) as dopant by adding the fine grade powder (average particle size of approximately 20 nm) of ZrO₂ into the polymerization reaction mixture of aniline. The composites obtained were characterized by infrared spectra (IR) and X-ray diffraction (XRD) and thermogravimetric analysis (TGA). TG curves and DTG curves of the composites suggest that the thermal degradation process of PANI/ZrO₂ composites proceeds in two-steps and the composites are more thermally stable than that of the pure PANI. The improvement in the thermal stability for the composites is attributed to the interaction between PANI and ZrO₂, which restricts the thermal motion of PANI chains and shields the degradation of PANI in the composites.     

Preparation, crystal structure and electrorheological performance of nano-sized particle materials containing ZrO2

A series of nano-sized particle materials containing ZrO₂ was prepared and their compositions were determined by elemental analysis and thermogravimetric analysis (TGA). The effect of particle size and crystal structure type (lattice and space group) on the ER performance of these materials was investigated by X-ray diffraction (XRD) analysis, Raman spectra, the particle size analysis and rheological measurement. Their electrorheological (ER) effects show that the ER activities of the ZrO₂ materials doped with rare earth (RE=Y, La, Ce, Gd, Tb), whose grain sizes were less than that of pure ZrO₂, were lower than that of pure ZrO₂, which belongs to the tetragonal crystal system. The ER activity of Y₂O₃-ZrO₂ is the strongest among all the RE-doped ZrO₂ materials. The ER activity of the tetragonal phase ZrO₂ is higher than that of the monoclinic phase ZrO₂.     

ZrO2 Nanoparticles Synthesized using Ionic Liquid Microemulsion

The water‐in‐ionic liquid (W/IL) microemulsion has been used to prepare the tetragonal ZrO₂ nanoparticles. A number of anomalous spherical dispersed particles have been obtained. However, the ZrO₂ nanoparticles synthesized using traditional water‐in‐xylene (W/O) microemulsion show an obvious fusion trace, indicating that the congregation takes place when the precursor was calcined. High thermostable ionic liquid may act as a protector to prevent the congregation of product. The samples are further characterized by XRD, SEM, TEM, and UV‐Vis spectroscopy. The results suggest that the obtained product has high degree of crystallinity and a narrow size distribution (15–40 nm). The XRD pattern has indicated a typical tetragonal crystal structure of ZrO₂. Moreover, the UV‐Vis absorption of the samples also shows the otential advantage in an application of screening ultraviolet radiation.     

Research article green synthesis of zirconium oxide nanoparticles (ZrO2NPs) using Helianthus annuus seed and their antimicrobial effects

Monoclinic Zirconia (ZrO₂NPs) nanoparticles were successfully prepared by non-toxic and low-cost production using green synthesis analysis from the methanolic extract of Helianthus annuus (sunflower) seeds as the reducing agent. Mechanism of the chemical reaction has shown the reduction and which confirmed the formation of nanoparticles via chemical bonding in the IR spectrum at 502-498 ​cm^-1 ZrO₂ nanoparticles were characterized as sharp peak at 275 ​nm in the UV-Vis spectrum with 3.7eV in photon energy bandgap, it confirms the monoclinic crystal structure, as well as x-ray diffractometry, reveals zirconia crystallite is 40.59 ​nm. The internal morphology of crystal structure is exhibited by Scanning Electron Microscopy (SEM), and Transmission Electron Microscope (TEM). The stability of nanoparticles is represented in terms of zeta potential (-9.32 ​mV) and particle size distribution (~331 ​nm). Biosynthesized ZrO₂NPs were indicated as superior antimicrobial activity for biomedical applications.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

Synthesis of nano-sized crystalline oxide ion conducting fluorite-type Y2O3-doped CeO2 using perovskite-like BaCe0.9Y0.1O2.95 (BCY) and study of CO2 capture properties of BCY

Formation of nano-sized Y₂O₃-doped CeO₂ (YCO) was observed in the chemical reaction between proton conducting Y₂O₃-doped BaCeO₃ (BCY) and CO₂ in the temperature range 700-1000 °C, which is generally prepared by wet-chemical methods that include sol-gel, hydrothermal, polymerization, combustion, and precipitation reactions. BCY can capture CO₂ of 0.13 g per ceramic gram at 700 °C, which is comparable to that of the well-known Li₂ZrO₃ (0.15 g per ceramic gram at 600 °C). Powder X-ray diffraction (PXRD), energy dispersive X-ray analysis (EDX), laser particle size analysis (LPSA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ac impedance spectroscopy were employed to characterize the reaction product obtained from reaction between BCY and CO₂ and subsequent acid washing. PXRD study reveals presence of fluorite-like CeO₂ (a=5.410 (1) Å) structure and BaCO₃ in reaction products. TEM investigation of the acid washed product showed the formation of nano-sized material with particle sizes of about 50 nm. The electrical conductivity of acid washed product (YCO) in air was found to be about an order higher than the undoped CeO₂ reported in the literature.     

Comparison of alkali-promoted ZrO2 catalysts towards carbon black oxidation

The effect of alkali metals deposition on zirconia has been studied in the oxidation of carbon black, considered as a model of diesel soot. The study of the influence of alkali content and alkali precursor was undertaken for K/ZrO₂, evidencing a better activity for a catalyst prepared with an atomic ratio K/Zr = 0.14 and from a nitrate precursor. Using the latter preparation conditions, alkali/ZrO₂ are found to be active in the oxidation of carbon black according the sequence ZrO₂ < Li/ZrO₂ < Na/ZrO₂ < K/ZrO₂ < Rb/ZrO₂ < Cs/ZrO₂. Alkali metals have an influence on the tetragonal–monoclinic crystalline modification. Alkali metals ions with low size tend to stabilize the tetragonal ZrO₂ phase whereas those with higher ionic radius favour the tetragonal–monoclinic modification. Fourier transform-infrared spectroscopy (FTIR) and temperature programmed reduction (TPR) measurements show that the catalytic activity partially depends on the presence of nitrate species stabilized in alkali/ZrO₂ even after calcination treatment at 600 °C. Nitrate species are more stable in the presence of alkali with high ionic radius than those of low size.     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

Preparation and Characterization of Amorphous ZrO2-SiO2 Composite Powders Processed by Sol-Gel Chemistry

Composite ZrO₂-SiO₂ powders, with different ZrO₂ contents, including pure ZrO₂ powders, were prepared by precipitation in SiO₂ suspensions, of zirconia gels from solutions of zirconyl chloride at pH = 11. These products were investigated in connection with the phase changes in ZrO₂ caused by heat-treatments. ZrO₂-SiO₂ mixtures containing 0–100% mol ZrO₂, were studied by differential thermal analysis (DTA), X-ray powder diffraction (XRD), temperature programmed desorption combined with mass spectroscopy (TPD-MS), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), to obtain information on the morphological and structural features of the particles before and during the heat treatment up to 1200°C. Specific surface areas were determined using nitrogen adsorption by the BET method. The results offer an explanation about some of the factors which can be influencing on the stabilization of metastable-cubic/tetragonal (C/T) phase of ZrO₂ and the evolution of surface areas (vulcano profile) observed in the composites.     

Kinetic study of zirconia crystallization from amorphous ZrO2-SiO2 composite precursors processed by sol-gel chemistry

Powder precursor gels with composition xZrO₂·(100–x)SiO₂, with selected values of x=8, 24, 43 and 75 mol%, were processed by sol-gel chemistry. Differential thermal analysis (DTA) was used to study crystallization in (cubic/tetragonal)-ZrO₂ during the heating of the reactive amorphous precursors. Kinetic parameters such as activation energy, Avrami's exponent and frequency factor have been simultaneously calculated from the computed DTA data using a previously reported kinetic model. The crystallization temperature decreases relative to the increase in the amount of ZrO₂, the value of the kinetic parameter of the crystallization being related to the value of x.     

Structural characterization and photocatalytic activity of hollow binary ZrO2/TiO2 oxide fibers

The formation of hollow binary ZrO₂/TiO₂ oxide fibers using mixed precursor solutions was achieved by activated carbon fibers templating technique combined with solvothermal process. The samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption, X-ray photoelectron spectroscopy (XPS), UV-vis, and infrared (IR) spectroscopy. The binary oxide system shows the anatase-type TiO₂ and tetragonal phase of ZrO₂, and the introduction of ZrO₂ notably inhibits the growth of TiO₂ nanocrystallites. Although calcined at 575 °C, all hollow ZrO₂/TiO₂ fibers exhibit higher surface areas (>113 m²/g) than pure TiO₂ hollow fibers. The Pyridine adsorption on ZrO₂/TiO₂ sample indicates the presence of stronger surface acid sites. Such properties bring about that the binary oxide system possesses higher efficiency and durable activity stability for photodegradation of gaseous ethylene and trichloromethane than P25 TiO₂. In addition, the macroscopic felt form for the resulting materials is more beneficial for practical applications than traditional catalysts forms.     

光还原Pt掺杂三维有序大孔ZrO2复合材料的光降解与光解水制氢

采用胶晶模板技术结合光还原方法制备了Pt掺杂复合材料三维有序大孔Pt/ZrO2(3DOM Pt/ZrO2)。通过X-射线衍射(XRD)、X-射线光电子能谱(XPS)、扫描电子显微镜(SEM)、紫外–可见漫反射吸收光谱(UV–Vis/DRS)和氮气吸附–脱附等测试方法对纳米复合材料3DOM Pt/ZrO2的晶相、组成、结构、形貌以及表面物理化学性质等进行表征。结果表明,Pt掺杂复合材料3DOM Pt/ZrO2与单体ZrO2的晶相相一致,其形貌呈现三维有序大孔结构,且孔结构排列整齐有序,孔壁为介孔结构。经光还原作用后该复合材料中Pt主要以单质形式存在,并且均匀分布在三维有序复合材料表面。同时,与单体ZrO2相比,纳米复合材料3DOM Pt/ZrO2的BET比表面积显著增大,光吸收性能发生改变,在240–350 nm间呈现强吸收。另外,在多模式光降解实验中,3DOM Pt/ZrO2的光活性明显增强。同时,其光解水制氢性能差不多是P25的2.5倍。     

Hydrated surface structure and its impacts on the stabilization of t-ZrO2

We first optimized the preparation conditions to 3.6-6.0 nm ZrO₂ in a pure tetragonal structure (t-phase). All samples were characterized by X-ray diffraction, high-resolution transmission electron microscope, thermal analysis, Raman spectra, and infrared spectra. It is found that the surfaces of t-ZrO₂ nanostructures were terminated by an amorphous hydration layer co-existing with small amounts of carbonate molecules. With the removal of hydrated surface layers under hydrothermal conditions at T>150 °C, t-ZrO₂ nanostructures became thermodynamically unstable, which partially transformed into monoclinic ZrO₂ (m-phase). Such a transformation occurs initially at surface regions and then develops into the bulk. High-temperature annealing in air could also remove the hydrated surface layers, which is however followed by a gradual transformation of t-ZrO₂ into m-ZrO₂ in both bulk and surface regions. These observations are explained in terms of the difference in surface free energies of m-ZrO₂ and t-ZrO₂ upon H₂O adsorption.     

Influence of the preparation conditions of Pd‐ZrO2 and AuPd‐ZrO2 nanoparticle–decorated functionalised MWCNTs: Electron spectroscopy study aided with the QUASES

The Pd, AuPd, and ZrO₂ nanoparticle–decorated functionalised multiwalled carbon nanotubes (f‐MWCNTs) were reported as efficient catalysts of formic acid (FA) electro‐oxidation. Different preparation conditions influence their chemical and structural properties analysed by X‐ray photoelectron spectroscopy aided with the quantitative analysis of surfaces by electron spectroscopy. Different reduction procedures such as NaBH₄, a polyol microwave‐assisted method (PMWA), and a high pressure microwave reactor (HPMWR) were applied for decorating ZrO₂/f‐MWCNTs with Pd and AuPd nanoparticles. The ZrO₂ nanoparticles are attached through oxygen groups to the surface of f‐MWCNTs. In NaBH₄ and HPMWR procedures, Pd nanoparticles precipitate predominantly on ZrO₂ of nearly nominal stoichiometry, whereas in PMWA procedure, Pd and AuPd nanoparticles precipitate predominantly on the surface of f‐MWCNTs, bridging with oxygen groups and ZrO_x (x < 2) and leading to Pd‐O‐Zr phase formation. Strong reducing procedures (NaBH₄ and FA) led to smaller Pd nanoparticle size, Pd oxide content, and PdO_x overlayer thickness in contrary to weak reduction procedures (HPMWR and PMWA). The highest content of Pd‐O‐Zr phase appeared for Pd predominant precipitation on ZrO₂ nanoparticles (HPMWR) in contrary to Pd and AuPd predominant precipitation on surface of f‐MWCNTs (NaBH₄ ~ FA > PMWA). Larger content of Pd‐O‐Zr phase in AuPd‐decorated ZrO₂/f‐MWCNTs in contrary to Pd‐decorated sample (PMWA) could be justified by different electronic properties of nanoparticles. The FA treatment of Pd and AuPd‐ZrO₂/f‐MWCNTs samples provided decreasing Pd oxide content, overlayer thickness, nanoparticle size, increasing nanoparticle surface coverage and density, amount of Pd‐O‐Zr, what results from reduction of oxygen groups bridging with Pd and ZrO_x nanoparticles, also through Pd‐O‐Zr phase.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.     

Effect of sol temperature on the structure,morphology, optical and photoluminescence properties of nanocrystalline zirconia thin films

Transparent nanocrystalline zirconia thin films were prepared by sol–gel dip coating technique using Zirconium oxychloride octahydrate as source material on quartz substrates, keeping the sol at room temperature (SET I) and 60 °C (SET II). X-ray diffraction (XRD) pattern shows the formation of mixed phase [tetragonal (T) + monoclinic (M)] in SET I and a pure tetragonal phase in SET II ZrO₂ thin films annealed at 400 °C. Phase transformation from tetragonal to monoclinic was achieved in SET II film annealed at 500 °C. Atomic force microscopy analysis reveals lower rms roughness and skewness in SET II film annealed at 500 °C indicating better optical quality. The transmittance spectra gives a higher average transmittance >85% (UV–VIS region) in SET II films. Optical spectra indicate that the ZrO₂ films contain direct—band transitions. The sub- band in the monoclinic ZrO₂ films introduced interstitial O⁻defect states above the top of the valance band. The energy bandgap increased (5.57–5.74 eV) in SET I films and decreased (5.74–5.62 eV) in SET II films, with annealing temperature. This is associated with the variations in grain sizes. Photoluminescence (PL) spectra give intense band at 384 and 396 nm in SET I and SET II films, respectively. A twofold increase in the PL intensity is observed in SET II film. The “Red” shift of SET I films and “Blue” shift of SET II films with annealing temperature, originates from the change of stress of the film due to lattice distortions.