Synthesis, characterization, and ion-exchange properties of colloidal zeolite nanocrystals

Here, we present physical–chemical properties of Linde type A (LTA) zeolite crystals synthesized via conventional hydrothermal and microwave heating methods. Both heating methods produced LTA crystals that were sub-micron in size, highly negatively charged, super-hydrophilic, and stable when dispersed in water. However, microwave heating produced relatively narrow crystal size distributions, required much shorter heating times, and did not significantly change composition, crystallinity, or surface chemistry. Moreover, microwave heating allowed systematic variation of crystal size by varying heating temperature and time during the crystallization reaction, thus producing a continuous gradient of crystal sizes ranging from about 90 to 300 nm. In ion-exchange studies, colloidal zeolites exhibited excellent sorption kinetics and capacity for divalent metal ions, suggesting their potential for use in water softening, scale inhibition, and scavenging of toxic metal ions from water.     

Studies with arylhydrazonopyridinones: Synthesis of new arylhydrazono thieno[3,4-c]pyridinones as novel D2T2 dye class; classical verse green methodologies

A variety of arylhydrazonopyridinones were prepared via heating cyanoacetamides with ethyl acetoacetate in absence of solvent under reflux conventionally or ultrasound irradiation or in a microwave oven. The formed products 5 and 6 could be readily converted to thienopyridones. Attempted addition of the latter to electron poor olefins afforded only arylhydrazonopyridinones.     

Advances in Microwave-Assisted Combinatorial Chemistry Without Polymer-Supported Reagents

Summary Combinatorial methodologies have dramatically changed the chemical research and discovery process, offering an unlimited source of new molecule entities to be screened for activity. The application of microwave irradiation in Combinatorial Chemistry and high-throughput synthesis has become increasingly popular. By taking advantage of this energy source, compound libraries for lead generation can be assembled in a fraction of time required by conventional thermal heating. This review focuses on the advances in developing synthetic methodologies in microwave without polymer-supported reagents suitable for combinatorial chemistry, including the advances in microwave-assisted fluorous synthesis technology.     

Comparative characterization of thermal isomerization rates of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane at convection and microwave heating

Rate constants of thermal isomerization of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane into 1‐(benzyl)‐4,5‐dihydro‐1H‐pyrazole at convection and microwave heating in toluene and chlorobenzene (solvents) were determined within the temperature range 90°C to 120°С. These data were used for the calculation of activation parameters of isomerization. It is shown that microwave heating increases the rate constants at the same temperature by a factor of 2 to 2.5 as compared with those using convection heating. The reason is that the effective temperature of microwave heating exceeds that of convection heating by 6°C to 9°С in toluene and by 12°C to 20°С in chlorobenzene as solvent.     

Experimental evidence of selective heating of molecules adsorbed in nanopores under microwave radiation

We have performed in situ quasielastic neutron scattering (QENS) measurements on zeolite-guest systems under microwave irradiation, for comparison with corresponding simulations. Both experiment and simulation reveal selective heating of methanol in silicalite, but little to no heating of benzene in silicalite. Effective translational and rotational temperatures extracted from QENS data under microwave heating were found to depend on microwave power. In agreement with simulation, QENS rotational temperatures significantly exceed translational ones at high microwave power, thus providing the first microscopic proof for athermal effects in microwave-driven nanopores.     

A rapid microwave protocol for Heck vinylation of aryl chlorides under air

In modern high-throughput chemistry, the overall workflow is a crucial factor and much work is devoted to speeding up the process of chemistry development. Since automated microwave-based synthesizers are known to streamline the compound production and to accelerate slow organic transformations, this technology was implemented for Heck reactions with sluggish aryl chlorides. Furthermore, homogeneous palladium-catalyzed Heck vinylations of aryl chlorides can be performed under air under optimized conditions. Based on this finding, controlled microwave heating was utilized to accelerate model reactions down to 30 min employing a mixture of ionic liquid and 1,4-dioxane as solvent.     

Controlled microwave heating in modern organic synthesis: highlights from the 2004–2008 literature

Direct and rapid heating by microwave irradiation in combination with sealed vessel processing in many cases enables reactions to be carried out in a fraction of the time generally required using conventional conditions. This makes microwave chemistry an ideal tool for rapid reaction scouting and optimization of conditions, allowing very rapid progress through hypotheses–experiment–results iterations. The speed at which multiple variations of reaction conditions can be performed allows a morning discussion of “What should we try?” to become an after-lunch discussion of “What were the results” Not surprisingly, therefore, many scientists both in academia and industry have turned to microwave synthesis as a front-line methodology for their projects. In this review, more than 220 published examples of microwave-assisted synthetic organic transformations from the 2004 to 2008 literature are discussed. An additional ca. 500 reaction schemes are presented in the Electronic Supplementary Material, providing the reader with an overall number of ca. 930 references in this fast-moving and exciting field.     

Ultrasound effect on Suzuki reactions. 1. Synthesis of unsymmetrical biaryls

Ultrasound effect on the Pd(0) catalysed reaction of arylboronic acid with halobenzenes was investigated. The effect of catalyst, base as well as solvent was tested. Heterogenous reaction of iodoarenes with different arylboronic acids, catalysed by Pd/C and KF as the base in methanol:water mixture resulted in good yields of cross-coupling products. Reaction time of sonochemical reaction was 1 h, while 4 h of reflux was necessary to achieve comparable results. Bromobenzenes gave best results using aqueous solution of PdCl2 as the catalyst, potassium carbonate as the base in toluene:water two phase system using TEBA (benzyltriethylammonium chloride) as PT catalyst. Chlorobenzenes gave just feeble yields of cross-coupling products.     

Research on pyrolysis of toluene under microwave heating by using ReaxFF molecular dynamics simulations

ReaxFF molecular dynamics (MD) simulations are performed to study high-temperature pyrolysis of toluene under microwave heating. It is observed that the temperature of the reaction system under microwave heating has a rapidly rising stage, which is similar to the phenomenon of thermal runaway often appeared in reactions under microwave heating. Simulations indicate that the consumption rate of toluene and generating rates of H₂ and CH₄ obtained under microwave heating are always lower than those obtained under conventional heating at the early stage. Analyses of the pyrolysis of toluene show that ReaxFF MD simulations can provide an efficient way to study chemical reactions under microwave heating.     

微波加热技术的应用与研究进展

文章简述了微波加热的发展概况，阐述了微波加热的介电损耗机理和微波加热的特性．从微波加热与解冻、微波干燥、微波改性、微波烧结、微波杀菌等方面，介绍了微波加热技术在国内的研究与应用情况，指出微波加热技术具有广阔的发展前景，今后应重点加强微波与物料问相互作用理论、微波场中物料的传热和传质机制、微波加热工艺与设备、微波加热技术和其他技术的有机结合等方面的研究．     

Preparation of a Novel Oriented Structure in Carbon Black Filled Isotactic Polypropylene Composites by Microwave Selective Heating

Microwave heating technology has numerous advantages compared with the traditional heating methods and has been widely used to process materials. However, most thermoplastics do not possess a sufficiently high dielectric property to be heated by microwaves. In this study, carbon black (CB) was utilized as the microwave absorber to improve the microwave heatability of isotactic polypropylene (iPP). Effects of CB contents on the microwave heatability of iPP/CB composites were studied. The temperature of iPP/CB composites with relatively low CB content (5% and 10%) increased slowly and tended to remain unchanged after 120 s of microwave exposure. In contrast, iPP/CB composites with relatively high CB content (15% and 20%) presented a much faster heating rate and the temperature of the sample kept increasing with the prolongation of exposure time. On the basis of the fact that iPP/CB composites with different CB contents have different microwave heatability, a novel oriented structure, in which the core layer has relatively high orientation and the surface layer has relatively low orientation, was prepared by selective microwave heating. Two-dimensional wide angle X-ray diffraction (2D-WAXD) analysis indicates that the orientation parameter calculated by the (040) plane of the surface layer (0.45) was lower than that of the core layer (0.83). The novel oriented structure is different from the common skin-core structure formed in the samples of semicrystalline polymers by traditional polymer processing methods, in which orientation of the skin layer is higher than that of the core layer. The novel oriented structure has not been reported before to our knowledge and its formation mechanism is also discussed in this paper.     

微波辐照对胶原蛋白三股螺旋结构的影响

胶原蛋白的三股螺旋结构是其不同于其他蛋白质的特殊结构，也是其具有特殊功能的基础，然而，胶原的三股螺旋结构易在外界条件的影响下被破坏。目前微波已被越来越多的应用于胶原蛋白的提取和改性过程，但是关于微波辐照对胶原蛋白结构影响的研究还相对较少。首先从牛跟腱中提取胶原蛋白，然后采用0.5 mg·mL-1的胶原蛋白溶液在30 ℃下以微波辐照保温为实验样，水浴加热和未经加热处理为对比样，最后采用紫外-可见光谱、傅里叶变换红外光谱、圆二色谱以及荧光发射光谱等方法，对不同加热方法中胶原蛋白的三股螺旋结构和超分子结构进行表征，研究了微波辐照对胶原蛋白结构的影响。实验结果表明，在低于胶原变性温度的条件下，无论是微波辐照还是水浴加热都不会破坏胶原蛋白的三股螺旋结构，也不会使胶原蛋白变性。但是，与水浴加热相比，微波辐照会对胶原蛋白的聚集行为产生抑制作用。微波辐照对胶原蛋白的作用既有与常规加热相同的热效应，又有常规加热过程中不存在的非热效应，非热效应表现为抑制胶原蛋白的聚集行为。研究结果可为微波场中胶原蛋白结构和性质的变化提供科学依据。     

Microwave-assisted synthesis using ionic liquids

The research and application of green chemistry principles have led to the development of cleaner processes. In this sense, during the present century an ever-growing number of studies have been published describing the use of ionic liquids (ILs) as solvents, catalysts, or templates to develop more environmentally friendly and efficient chemical transformations for their use in both academia and industry. The conjugation of ILs and microwave irradiation as a non-conventional heating source has shown evident advantages when compared to conventional synthetic procedures for the generation of fast, efficient, and environmental friendly synthetic methodologies. This review focuses on the advances in the use of ILs in organic, polymers and materials syntheses under MW irradiation conditions.     

Experimental and numerical investigation of a ceramic dielectric resonator (DRA): CaCu3Ti4O12 (CCTO)

In this study, the CaCu₃Ti₄O₁₂ (CCTO) ceramic phase was synthesized by microwave heating in a much shorter time compared to the conventional heating methods. The results indicate that microwave processing is a promising method for preparing CCTO ceramics. CCTO was prepared using a domestic microwave oven operated at 2.45 GHz with 800 W. After a few minutes of microwave irradiation the formation of CCTO was confirmed by X-ray powder diffraction. The CCTO ceramic was studied in the medium-frequency (MF) range (100 Hz-1 MHz) and in the microwave range of frequencies. The experimental and theoretical characteristics of the dielectric resonator antenna are investigated.     

Diffusion Processes in Semiconductor Structures During Microwave Annealing

We present the results of experimental studies of the influence of microwave radiation on the diffusion processes in two different semiconductor materials, namely, InGaAs heterostructures with quantum wells and boron-ion implanted silicon. The experiments were performed in a 30 GHz gyrotron device for microwave processing of materials. We compare the results of heterostructure annealing under microwave and thermal heating. It is found that under microwave heating, the coefficient of In–Ga interdiffusion in InGaAs heterostructures is about an order of magnitude smaller than that under thermal heating at the same temperatures, while the activation energy of diffusion is approximately the same for both heating regimes. In boron-ion implanted silicon, the sheet resistance after annealing at a higher microwave power turns out to be lower than that after annealing at the same temperature and a lower power. This indicates that the microwave field exerts a nonthermal effect on electric activation of dopant atoms. The results show the possibility of optimization of the microwave-annealing regimes to obtain the maximum electric activation at a limited diffusion spreading of the density profile of implanted atoms.     

Microwave-induced low-temperature crystallization of amorphous Si thin films

Microwave heating was utilized for low-temperature crystallization of amorphous Si (a-Si) films. Microwave heating lowered the annealing temperature and reduced the annealing time. By microwave heating the hydrogen in the amorphous films was diffused out long before the nucleation of polycrystalline Si (poly-Si). The combination of NiCl₂ coating on a-Si and microwave heating greatly reduced crystallization temperature. The combination of metal-induced crystallization and microwave-induced crystallization might be a useful technique to develop high-quality poly-Si films at low temperature.     

Preparation of activated carbons by microwave heating KOH activation

Activated carbons with high surface areas were prepared via KOH activation process by microwave (MW) heating. As a comparison, activated carbons were also prepared by conventional heating (EF) method. The influences of KOH/Mesocarbon microbeads (MCMB) weight ratio and activation time on the pore properties of the activated carbons were investigated. For both MW and EF heating methods, the surface area and pore volume increase to a maximum and then decrease with the KOH/MCMB ratio increasing. The effects of activation time on the pore properties depend on the KOH/MCMB ratio. The activated carbons prepared by MW heating have higher surface area and larger pore volume than those by EF heating when KOH/MCMB ratio is the same. The MW heating method shortens the activation time considerably. Activated carbons prepared by MW heating show low content of oxygen containing groups.     

Effect of Lewis acids on the Diels–Alder reaction in ionic liquids with different activation modes

The Diels–Alder reaction has been examined in room temperature ionic liquids with high molar concentrations of Lewis acids under various conditions. A molar ratio of 10% catalyst gave a large increase in the selectivity and the yield of the reaction. The effect of catalysts on reaction rates was also examined under 100 MPa of pressure which leads to modest improvements in reaction rates. Ultrasound and microwave dielectric heating were also shown to improve the rate and, to a minor extent, selectivity of the examined reactions. Copyright © 2008 John Wiley & Sons, Ltd.     

Non-Thermal Effects of Microwave Oven Heating on Ground Beef Meat Studied in the Mid-Infrared Region by Fourier Transform Infrared Spectroscopy

The effects of cooking by microwave oven on the secondary structure of lipid and protein contents in bovine ground beef were investigated in the midinfrared region by Fourier transform infrared (FTIR) spectroscopy to highlight the nonthermal effects of microwave oven heating. Samples of bovine ground beef were cooked in a conventional electric oven at the temperature of 175°C for 15 min and in a microwave oven at 800 W for 1½ min. Spectra analyses of bovine meat after cooking in the conventional oven evidenced a relevant increase in intensity of the carbonyl band at 1742 cm^?1 and of the methylene group at 2921 and 2853 cm^?1 that can be attributed to the Maillard reaction. In contrast, the increase in intensity of these bands after microwave oven heating was less than that which occurred after conventional cooking, showing that the temperature in ground beef meat samples during microwave heating was less than that induced by conventional heating. Spectral analysis in the amide I, II, and III regions showed that a significant increase in intensity occurred in the region from 1660 to 1675 cm^?1 and around 1695, 1635, 1575, and 988 cm^?1 after cooking by means of a microwave oven. These features, which can be attributed to β-turns and β-sheet structures, are characteristic of disorder processes in meat protein contents and increasing transition dipole coupling due to higher contents in aggregated β-sheet structures. This result highlighted nonthermal effects of microwave oven heating in the protein's secondary structure.     

液化残渣的微波热解与常规热解对比分析

采用微波加热和常规电加热两种条件进行液化残渣(DCLR)的热解实验,考察了热解产物固体焦、焦油及煤气的组成及结构的变化规律,采用红外分析(FTIR)与气相色谱-质谱(GC-MS)联用技术对热解产品进行了分析表征。研究表明,在微波场中,DCLR的升温速率很快,20 min左右物料温度就可达到900 ℃,最大升温速率可达到329 ℃·min-1,而常规加热的升温速率基本保持恒定。与常规热解相比,微波热解后固体焦的产率降低2.85%,而焦油和煤气产率分别增加了0.66%和2.19%。DCLR热解后固体焦的索氏萃取组分重油(HS)、沥青烯(A)及前沥青烯(PA)含量均大幅降低,而四氢呋喃不溶物(THFIS)则有所增加,但是两种热解条件下得到的固体焦的四种索氏组成差异不是很大,说明DCLR的热解过程是以HS,A与PA的转化为主的。微波热解后固体焦红外谱上3 437.6,1 632.0 cm-1以及1 079.99 cm-1处吸收峰的强度与常规热解相比明显降低,说明微波场中DCLR的热解更为彻底。热解后焦油和煤气产率均有所增加,煤气中H₂含量均达到60%以上。GC-MS分析表明,经由石油醚萃取后的热解焦油中脂肪类、芳香类与醇类物质组成以及C_1~5,C_11~20与C₂₀以上组分的含量均没有发生明显变化,而微波热解焦油中沥青质的含量则下降了7.7%,说明微波作用可有效促进DCLR中沥青质的热分解,有利于热解焦油的轻质化。