香豆素-3-羧酸分子印迹聚合物复合膜对底物的结合及渗透选择性质的研究

在光照和引发剂的作用下, 模板分子香豆素-3-羧酸、 功能单体丙烯酰胺和交联剂乙二醇二甲基丙烯酸酯(EDMA)或三甲氧基丙烷三甲基丙烯酸(TRIM)在聚偏氟乙烯(PVDF)微孔滤膜表面聚合形成分子印迹聚合物复合膜. 用高效液相色谱仪测定了分别以TRIM和EDMA为交联剂制备的分子印迹聚合物膜在不同溶剂中对混合底物的结合和渗透选择性. 结果表明, 以TRIM为交联剂的印迹膜对模板分子具有更高的结合和渗透选择性. 另外, 以乙腈或乙腈/水作为溶剂对分子印迹膜所作的实验和讨论有助于为从复杂样品中分离模板分子奠定理论和实验基础.     

氟哌酸分子印迹共混膜的制备及结构表征

以氟哌酸为模板分子,α-甲基丙烯酸为功能单体,三甲氧基丙烷三甲基丙烯酸酯为交联剂,利用本体聚合方法制备了具有特异选择性的氟哌酸分子印迹聚合物,并利用聚砜与氟哌酸分子印迹聚合物共混的方法制备了分子印迹聚合物膜.运用红外光谱分析和透射电子显微镜研究了氟哌酸分子印迹聚合物的结构.运用扫描电子显微镜研究了分子识别膜的机理和吸附性能,运用平衡结合实验法证明了分子识别膜对氟哌酸表现出了较高的选择性.     

核壳式碳纳米管-萘夫西林分子印迹聚合物的制备及应用

采用溶胶-凝胶的方法,以碳纳米管为载体,萘夫西林(Nafcillin)为模板,无水乙醇为溶剂,氨丙基三乙氧基硅烷(APTES)和苯基三甲氧基硅烷(PTMOS)为双功能单体,四乙氧基硅烷(TEOS)为交联剂,合成核壳结构萘夫西林分子印迹聚合物(CNTs@Naf-MIPs).用透射电子显微镜(TEM)、傅立叶变换红外光谱仪(FT-IR)对萘夫西林分子印迹聚合物的结构、形貌进行了表征;对其吸附性能进行了详细研究,CNTs@NafMIPs对模板分子的吸附符合Langmuir方程,Qmax为9.5 mg/g,KD为56.6 mL/mg.制备的印迹聚合物只需30 min达到吸附平衡,吸附-解吸循环5次后,性能稳定.将其应用于加标5和10 μg/kg萘夫西林的鸡蛋样品的选择性富集,回收率可达61.3％～84.3％,准确性较好.     

环丙沙星分子印迹聚合物的制备及其吸附特性的研究

以环丙沙星(CIP)为模板分子,α-甲基丙烯酸(MAA)为功能单体,三甲基丙烯酸三羟甲基丙烷酯(TRIM)为交联剂,进行热聚合.通过对于功能单体和交联剂的用量对分子印迹聚合物吸附性能的影响的研究,得到最佳的聚合配比为n(CIP):n(MMA):n(TRJM)=1:6:16,并以此配比制得了对环丙沙星具有特异选择性吸附的分子印迹聚合物.通过静态平衡结合法研究了模板聚合物的结合动力学以及该聚合物的结合能力和选择特性,通过Scatchard分析法研究了印迹聚合物对模板分子的结合特性.结果表明,该印迹聚合物具有良好的吸附能力和吸附选择性,静态吸附分配系数KD为41.64,分离因子α为1.62;该印迹聚合物中形成了2类不同的结合位点,经计算它们的离解常数分别为Kd1=5.249×10-5mol·L-1,Kd2=2.237×10-3mol·L-1.     

三聚氰胺分子印迹表面等离子体共振传感器的制备及分析应用

以合成的烯丙基-1,3,5-三嗪-2,4,6-(1H,3H,5H)三酮为功能单体,三聚氰胺为模板分子,乙二醇二甲基丙烯酸酯为交联剂,在表面等离子体共振(SPR)传感芯片上合成了分子印迹聚合物薄膜。根据印迹聚合物的朗格缪尔方程式,计算得到三聚氰胺和分子印迹聚合物之间的结合常数为1.40×10~8L/mol。此传感器显示出对模板分子三聚氰胺的高选择性,在p H=7.5的条件下,此传感器对三聚氰胺的响应最佳,线性范围为0.1-10.0 nmol/L(R=0.9991)。将此传感器用于牛奶和奶粉中三聚氰胺的检测,检出限分别为62.6 pmol/L和56.4 pmol/L(S/N=3),回收率分别为91.5%和92.0%。     

非诺贝特印迹聚合物的制备与性能研究

以非诺贝特(FNB)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了FNB分子印迹聚合物(MIP)。IR和SEM表征的结果显示:FNB分子印迹聚合物中存在与模板分子相互作用的特征基团,与空白聚合物(NIP)的表面形态显著不同,说明MIP存在与模板分子相互识别的结合位点。采用静态平衡结合方法和Scatchard模型评价了FNB分子印迹聚合物的结合特性和识别机理,并考察了其选择性吸附能力。结果表明,FNB分子印迹聚合物存在能量相异的两类特异性结合位点,对FNB具有高选择吸附特性,饱和吸附量为6.363mg/g。     

手性药物(S)-布洛芬氢键自组装印迹聚合物识别机理

以含有单一结合基团的手性药物(S)-布洛芬作为模板分子,制备了系列印迹聚合物.采用紫外-可见光谱和红外光谱对印迹及识别机理进行了研究.结果表明,模板分子与功能单体分别通过形成蓝移氢键和红移氢键完成预组装过程和再识别吸附过程,且形成了主客体配比为1∶1的配合物.等温吸附实验结果表明,印迹聚合物对模板分子表现出明显的选择性吸附,特异性吸附容量为37.92μmol/g,印迹指数为3.06,且印迹聚合物内特定的三维空间结构对其特异性吸附性能具有显著影响.由手性分离实验考察了印迹聚合物的拆分性能,其对(R)-布洛芬的分离因子为1.79.     

磁性胰蛋白酶分子印迹聚合物的制备及性能评价

以壳聚糖修饰的四氧化三铁为载体,利用壳聚糖表面的氨基与戊二醛结合,丙烯酰胺为功能单体和交联剂,胰蛋白酶为模板蛋白,制备了磁性胰蛋白酶分子印迹聚合物。通过静态平衡结合法研究了磁性分子印迹聚合物的吸附能力、选择性。结果表明,与磁性分子非印迹聚合物相比,磁性分子印迹聚合物对模板蛋白具有高选择性和高特异性吸附,最大吸附量为162.2mg·g-1;Scatchard分析表明,存在两类不同的吸附结合位点,其离解常数分别为96.5μg·mL-1(高结合位点)和2.41mg.mL-1(低结合位点)。     

壬基酚表面印迹聚合物微球的合成及分子识别特性

采用表面分子印迹技术,在二氧化硅微粒表面通过乙烯基三甲氧基硅烷接枝,以壬基酚(NP)为模板、α-甲基丙烯酸为功能单体制备了壬基酚印迹聚合物。扫描电镜及比表面分析仪测试结果表明制备的印迹聚合物呈均匀分散的微球,具有较大的比表面积。采用红外光谱表征印迹聚合物微球制备过程中的化学结构变化情况,并用平衡吸附法研究了聚合物对NP的结合性能与分子识别特性。研究结果表明,聚合物对壬基酚具有良好的结合亲和性,最大结合量可达184.6 mg/g。印迹聚合物对NP的吸附量高于其结构类似物对特辛基酚和双酚A的吸附量,表现出较高的选择性识别能力。     

染料木素分子印迹聚合物的制备及其识别性能

以染料木素为模板分子、4-乙烯基吡啶(4-VP)为功能单体、乙二醇二甲基双丙烯酸酯(EGDMA)为交联剂、四氢呋喃(THF)为溶剂,采用本体聚合法制备了染料木素的分子印迹聚合物;采用静态平衡结合实验研究了该分子印迹聚合物对染料木素的结合能力和选择性能.结果表明,与化学组成相同的相应非印迹聚合物相比,染料木素分子印迹聚合物对染料木素的吸附性能和选择性更好.利用所合成的分子印迹聚合物作为固相萃取材料填充固相萃取小柱,可以选择性地从豆奶粉中分离、富集染料木素;此外,该分子印迹聚合物还有望用于其他豆制品的分析检验.     

Simple and effective 3D recognition of domoic acid using a molecularly imprinted polymer

We have developed a simple and effective molecular imprinting technique to target compounds with flexible structure. Domoic acid (DA), an amnesic shellfish poison, was used as the target compound while many acidic compounds (mono-, di-, and tricarboxylic acids) were used as template molecules for molecularly imprinted polymers (MIPs). Evaluation of selective recognition abilities using liquid chromatography revealed that the highest selective recognition ability for DA was found when pentane-1,3,5-tricarboxylic acid (1,3,5-PeTA) was used as the template. Computer modeling studies of the DA structure suggested that the observed selective recognition depended on the structural changes in DA at the recognition site of the MIPs as well as spatial distance between the COOH groups in DA and 1,3,5-PeTA. Using the 1,3,5-PeTA-MIP, we could easily purify DA from blue mussel extracts by solid-phase extraction.     

Theoretical and experimental studies on the performances of barbital‐imprinted systems

By using density functional theory, we studied the interaction process between barbital and 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine in acetonitrile at 333 K. Barbital and 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine were used as the template and functional monomer, respectively. The molecularly imprinted polymer microspheres containing barbital and 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine were synthesized through precipitation polymerization. After removing the template molecule barbital, the average diameter of the obtained molecularly imprinted polymers was 1.45 μm. By optimizing the molar ratio of barbital and the 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine, the resulting molecularly imprinted polymers showed the highest adsorption for the barbital. The analysis of the Scatchard plot revealed that the dissociation constant (K_d) and apparent maximum adsorption quantity (Q_max) of the molecularly imprinted polymers were 30.69 mg/L and 8.68 mg/g, respectively. The study of selective adsorption showed that molecularly imprinted polymers exhibited higher selectivity for barbtital than that for 1,3‐dimethyl barbituric acid and pentobarbital. Herein, the studies can provide theoretical and experimental references for the barbital‐imprinted system.     

Low cross-linked molecularly imprinted monolithic column prepared in molecular crowding conditions

Molecular crowding is a new approach to promoting molecular imprinting more efficiently. In this work, this concept was applied to the preparation of low cross-linked imprinted polymers in the presence of an immobilised template for stabilizing binding sites and improving molecular recognition. An imprinted monolithic column was synthesized using a mixture of 2,4-diamino-6-methyl-1,3,5-triazine (template), 2,4-diamino-6-(methacryloyloxy) ethyl-1,3,5-triazine (polymerisable template), methacrylic acid, ethylene glycol dimethacrylate, and polystyrene (molecular crowding agent). Some polymerization factors, such as template-monomer molar ratio, the composition of the porogen and crosslinking density, on the imprinting effect of resulting MIP monolith were systematically investigated. The results indicated that the imprinted monolithic columns prepared in the presence of molecular crowding agent retained affinity and specificity for template even when prepared with a level of cross-linker as low as 9%. Moreover, a stoichiometric displacement model for retention was successfully applied to evaluate the interaction between the solute and the stationary phase. Compared with the low cross-linked MIP prepared by conventional polymerization, the molecular crowding-based low cross-linked monolithic MIPs showed higher selectivity. The results suggested that molecular crowding is a powerful strategy to increase the effect of molecular imprinting at a low level of crosslinker.     

The application of pseudo template molecularly imprinted polymer to the solid-phase extraction of cyromazine and its metabolic melamine from egg and milk

The combination of molecularly imprinted polymer with high performance liquid chromatography has been developed to determine cyromazine and its metabolic melamine in some samples. However, the potential risk of template leakage used in molecularly imprinted polymer is a major disadvantage. To solve this problem, 2-(4,6-diamino-1,3,5-triazin-2-ylamino) ethanethiol disulfide, a molecule that shares the similar imprinting sites with cyromazine and melamine, was selected as pseudo template to prepare molecularly imprinted polymer. Methacrylic acid, ethylene glycol dimethyl acrylate and toluene were selected as functional monomer, crosslinker and porogen, respectively. The molecular recognition property and binding capability of cyromazine and melamine were evaluated by adsorption test and Scatchard analysis. The results showed that the molecularly imprinted polymer based on pseudo template had more excellent affinity and selectivity for cyromazine and melamine. The resulting molecularly imprinted polymer was used as a solid-phase extraction material to enrich cyromazine and melamine in egg and milk samples for high performance liquid chromatography analysis. The solid-phase extraction process was carefully optimized. It was found that when different concentration of cyromazine and melamine standards were spiked into samples, satisfactory recovery rate of cyromazine and melamine were obtained as 85.6-98.8% with relative standard deviation <5.5%.     

Incorporation and manipulation of coronene in an organic template structure

A two-dimensional molecular template structure of 1,3,5-benzenetricarboxylic acid (trimesic acid, TMA) was formed on a highly oriented pyrolytic graphite surface (HOPG) by self-assembly at the liquid-solid interface. Scanning tunneling microscopy (STM) investigations show high-resolution images of the porous structure on the surface. After the host structure was created, coronene molecules were inserted as guest molecules into the pores. STM results indicate that some of the guest molecules rotate inside their molecular bearing. Further investigations show that single coronene molecules can be directly kicked out of their pores by means of STM.     

Determination of domoic acid in shellfish extracted by molecularly imprinted polymers

A selective sample cleanup method using molecularly imprinted polymers was developed for the separation of domoic acid (a shellfish toxin) from shellfish samples. The molecularly imprinted polymers for domoic acid was prepared by emulsion polymerization using 1,3,5‐pentanetricarboxylic acid as the template molecule, 4‐vinyl pyridine as the functional monomer, ethylene glycol dimethacrylate as the crosslinker, and Span80/Tween‐80 (1:1 v/v) as the composite emulsifiers. The molecularly imprinted polymer showed high affinity to domoic acid with a dissociation constant of 13.5 μg/mL and apparent maximum adsorption capacity of 1249 μg/g. They were used as a selective sorbent for the detection of domoic acid from seafood samples coupled with high‐performance liquid chromatography. The detection limit of 0.17 μg/g was lower than the maximum level permitted by several authorities. The mean recoveries of domoic acid from clam samples were 93.0–98.7%. It was demonstrated that the proposed method could be applied to the determination of domoic acid from shellfish samples.     

Separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐ triazacyclohexane by molecularly imprinted solid‐phase extraction

Synthesis of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane by the Bachmann process leads to a mixture of both. The separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane from their mixture is difficult because the sizes and physical properties of these homologous compounds are similar. For this purpose, seven molecularly imprinted polymers have been synthesized for each explosive, and a selective solid‐phase extraction procedure has been developed. A molecularly imprinted polymer, synthesized with 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane as the template, methacrylic acid as the monomer and trimethylolpropane trimethacrylate as the cross‐linking agent in a molar ratio of 1:8:8 showed the best separation capability. A packed cartridge containing this polymer can be reused for 23 solid‐phase extraction cycles without repacking, and the total separation capability toward 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane reached 6.81 mg per gram of polymer. 1,3,5‐Trinitro‐1,3,5‐triazacyclohexane was not detected in the separated 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane by high‐performance liquid chromatography and vice versa. This newly developed method had the advantages of high recovery (100%) and purity, environmental friendliness, and room temperature operability. This study showed that some molecularly imprinted polymers that cannot absorb target analytes well in the solvent in which the polymers were polymerized might have high‐binding capacity for the analytes and show imprinting effects in other solvents.     

Molecularly imprinted polymer for selective extraction of domoic acid from seafood coupled with high-performance liquid chromatographic determination

In this work, a highly selective sample cleanup procedure that combining molecular imprinting technique (MIT) and solid phase extraction (SPE) was developed for the isolation of domoic acid (a fascinating marine toxin) from seafood samples. The molecular imprinting polymer (MIP) for domoic acid was prepared using 1,3,5-pentanetricarboxylic acid as the template molecule instead of domoic acid. 4-Vinyl pyridine was used as the functional monomer and ethylene glycol dimethacrylate was used as the cross-linking monomer. The obtained imprinted polymer showed high affinity to domoic acid and was used as selective sorbent for the SPE of domoic acid from seafood samples. An off-line molecularly imprinted solid phase extraction (MISPE) method followed by high-performance liquid chromatography (HPLC) with diode-array detection for the detection of domoic acid was also established. Good linearity was obtained from 0.5 mg L⁻¹ to 25 mg L⁻¹ (R² > 0.99) with a quantitation limit of 0.1 mg L⁻¹, which was sufficient to determine domoic acid at the maximum level permitted by several authorities. The mean recoveries of domoic acid from mussel extracts were 93.4-96.7%. It was demonstrated that the proposed MISPE-HPLC method could be applied to direct determination of domoic acid from seafood samples.     

Determination of N-nitroso derivatives of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in soils by pressurized liquid extraction and liquid chromatography-electrospray ionization mass spectrometry

To aid in the evaluation of the potential toxicity of N-nitroso derivatives of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), we describe a pressurized liquid extraction (PLE) followed by liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) method for determination of RDX and its N-nitroso derivatives: hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX), hexahydro-1,3-dinitroso-5-nitro-1,3,5-triazine (DNX), and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX) in soils. Sandy loam soil was spiked with RDX and its N-nitroso derivatives (MNX, DNX, and TNX). Acetonitrile was used as the PLE extraction solvent at 100 degrees C and 1500 psi for 15 min. Florisil was used to cleanup extracts following PLE. Instrumental analysis employed LC-ESI-MS, in which 1mM acetic acid was added to the mobile phase to facilitate formation of acetate adduct ions [M+CH(3)COO](-). The method detection limits (MDLs) for RDX, MNX, DNX, and TNX were 1.46, 1.46, 1.69, and 1.93 ng/g, respectively. High recovery (91.1-108.3%), good precision (RSD: 3.2-12.4%), and reproducibility were achieved. This method proved effective and was applied to monitor the reductive biotransformation of MNX in soils with the presence of earthworms (Eisenia fetida).     

Theoretical and experimental comparative studies of nonlinear optical properties for selected melaminium compounds

The bis(melaminium) sulphate dihydrate, 2,4,6-triamine-1,3,5-triazin-1,3-ium tartrate monohydrate, 2,4,6-triamine-1,3,5-triazin-1-ium hydrogenphthalate, 2,4,6-triamine-1,3,5-triazin-1-ium acetate acetic acid solvate monohydrate, 2,4,6-triamine-1,3,5-triazin-1-ium bis(selenate) trihydrate, melaminium diperchlorate hydrate, melaminium bis(trichloroacetate) monohydrate and melaminium bis(4-hydroxybenzenesulphonate) dihydrate were discovered recently as perspective materials for nonlinear optical applications. On the basis of X-ray structures for eight melaminium compounds the time dependent Hartree Fock (TDHF) method was used for calculation of the polarizability, and first and second hyperpolarizability. Detailed directional studies of calculated hyperpolarizability for all investigated melaminium compounds are shown. The theoretical results are compared with experimental values of β.