Ba0.6Sr0.4TiO3/聚偏氟乙烯-聚甲基丙烯酸甲酯复合材料的制备及其介电性能

采用流延热压工艺制备Ba_0.6Sr_0.4TiO₃(BST)/聚偏氟乙烯(PVDF)?聚甲基丙烯酸甲酯(PMMA)复合薄膜,研究了PMMA含量对复合材料微观组织结构和介电性能的影响规律。结果表明,BST相能够均匀分散在聚合物基体中,归因于PMMA与PVDF良好的相容性,2种聚合物之间的界面不分明;随着PMMA含量的增加,复合材料的介电常数先降低后升高,耐击穿强度和介电可调性先增加后减少。PMMA含量(体积分数)为15%的BST/PVDF?PMMA₁₅复合材料的综合性能最佳:介电常数为23.2,介电损耗为0.07,耐击穿强度为1412 kV·cm^-1,在550 kV·cm^-1偏压场下,介电可调性为26.2%。     

PMMA: A key macromolecular component for dielectric low-κ hybrid inorganic-organic polymer films

Inorganic-organic composite and hybrid films find widespread applications for the development of functional materials. Polymer matrices with embedded inorganic fillers, nanoparticles or clusters are particularly appealing for optical, electronic, dielectric and magnetic applications. In particular, the development of hybrid layers with tailored dielectric properties represents a key issue in many technological fields.In this framework, poly(methyl methacrylate) (PMMA), due to its outstanding chemico-physical properties, represents a particularly suitable polymer component for the embedding of both microscopic and nanoscopic functional inorganic fillers. The wide use of such a matrix has to be traced back to the favourable combination of chemical and physical properties and easy processing. In this review, the main features and properties of PMMA, with a particular focus on dielectric ones, are firstly briefly described. Selected examples to illustrate the state-of-the art of its corresponding use as dielectric matrix are given and several examples are provided and surveyed.Finally, three case studies concerning PMMA-based hybrid films, produced for very different application fields, are described and discussed. The first example deals with the entrapment of micrometric zinc sulphide powders in PMMA, which acts as a host matrix for the electroluminescent particles in thick film-based Alternate Current Powder Electroluminescent Lamps (ACPELs). The second example describes the preparation of low-κ inorganic-organic hybrid dielectric films based on a PMMA-polyvinylchloride(PVC) blend and a hydrophobic silica powder functionalised on the surface with trimethylsiloxane groups (m-SiO₂). The composition of the investigated materials is [(PMMA)_x(PVC)_y]/(m-SiO₂)_z with z ranging from 0 to 38.3 wt% and x = y = (100 − z)/2. The third case concerns the use of PMMA as a matrix to embed zirconium oxoclusters through the formation of covalent bonds. The obtained material, characterised by a dielectric constant value remarkably lower (1.93 at 1 kHz and 25 °C) than in pristine PMMA (3.0 at 1 kHz and 25 °C), appears as very appealing for the development of microelectronic devices based on low dielectric constant polymer films such as, for instance, field-effect transistor (FET).These three cases are paradigms of three different approaches to composite and hybrid materials based on the embedding of particles in PMMA polymer matrix.     

Interfacial polarization in composite materials with spherical fillers: characteristic frequencies and scaling laws

The dielectric properties of composite materials consisting of a host matrix filled with spherical particles are investigated as a function of frequency by means of numerical calculations. Two different cases are analyzed: (a) composites with a conductive matrix and insulating fillers and (b) composites with an insulating matrix and conductive fillers. In both situations, dielectric dispersions due to interfacial polarization effects are observed in the dielectric spectra. In the present contribution, the characteristic frequencies of interfacial polarization effects are systematically analyzed in dependence on the volume fraction of the spherical fillers and on the conductivity values of the composite phases. The resulting scaling laws are discussed in detail.     

Effect of nano/micro‐mixed ceramic fillers on the dielectric and thermal properties of epoxy polymer composites

Nano/micro ceramic‐filled epoxy composite materials have been processed with various percentage additions of SiO₂, Al₂O₃ ceramic fillers as reinforcements selected from the nano and micro origin sources. Different types of filler combinations, viz. only nano, only micro, nano/micro, and micro/micro particles, were designed to investigate their influence on the thermal expansion, thermal conductivity, and dielectric properties of epoxy polymers. Thermal expansion studies were conducted using thermomechanical analysis that revealed a two‐step expansion pattern consecutively before and after vitreous transition temperatures. The presence of micro fillers have shown vitreous transition temperature in the range 70–80°C compared with that of nano structured composites in which the same was observed as ~90°C. Similarly, the bulk thermal conductivity is found to increase with increasing percentage of micron‐size Al₂O₃. It was established that the addition of micro fillers lead to epoxy composite materials that exhibited lower thermal expansion and higher thermal conductivity compared with nano fillers. Moreover, nano fillers have a significantly decisive role in having low bulk dielectric permittivity. In this study, epoxy composites with a thermal expansion coefficient of 2.5 × 10^?5/K, thermal conductivity of 1.18 W/m · K and dielectric permittivity in the range 4–5 at 1 kHz have been obtained. The study confirms that although the micro fillers seem to exhibit good thermal conductivity and low expansion coefficient, the nano‐size ceramic fillers are candidate as cofillers for low dielectric permittivity. However, a suitable proportion of nano/micro‐mixed fillers is necessary for achieving epoxy composites with promising thermal conductivity, controlled coefficient of thermal expansion and dielectric permittivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Dielectric,thermal, and mechanical properties of CeO2‐filled HDPE composites for microwave substrate applications

Cerium oxide‐filled high density polyethylene (HDPE) composites for microwave substrate applications were prepared by sigma‐blend technique. The HDPE was used as the matrix and the dispersion of CeO₂ in the composite was varied up to 0.5 by volume fraction, and the dielectric properties were studied at 1 MHz and microwave frequencies. The variations of thermal conductivity (k_eff), coefficient of thermal expansion (α_c) and Vicker's microhardness with the volume fraction of the filler were also measured. The relative permittivity (ε_eff) and dielectric loss (tan δ) were found to increase with increase in CeO₂ content. For 0.4 volume fraction loading of the ceramic, the composite had ε_eff = 5.7, tan δ = 0.0068 (at 7 GHz), k_eff = 2.6 W/m °C, α_c = 98.5 ppm/°C, Vicker's microhardness of 18 kg/mm² and tensile strength of 14.6 MPa. Different theoretical approaches have been used to predict the effective permittivity, thermal conductivity, and coefficient of thermal expansion of composite systems and the results were compared with the experimental data. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 998–1008, 2010     

Swift heavy ion induced modification in dielectric and microhardness properties of polymer composites

Polymer composites with different concentrations of organometallics (ferric oxalate) dispersed PMMA were prepared. PMMA was synthesized by solution polymerization technique. These films were irradiated with 120 MeV Ni¹⁰⁺ ions in the fluence range 10¹¹-5 × 10¹² ions/cm². The radiation induced modifications in dielectric properties, microhardness, structural changes and surface morphology of polymer composite films have been investigated at different concentrations of filler and ion-fluences. It was observed that electrical conductivity and hardness of the films increase with the concentration of the filler and also with the fluence. The dielectric constant (?) obeys the Universal law given by ?αfⁿ⁻¹. The dielectric constant/loss is observed to change significantly due to irradiation. This suggests that ion beam irradiation promotes the metal to polymer bonding and convert polymeric structure into hydrogen depleted carbon network. This makes the composites more conductive and harder. Surface morphology of the films has been studied using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The average surface roughness is observed to increase after irradiation as revealed by AFM studies. The SEM images show the blisters type of phenomenon on the surface due to ion beam irradiation.     

Structural,thermal and electrical properties of poly(methyl methacrylate)/CaCu3Ti4O12 composite sheets fabricated via melt mixing

Poly(methyl methacrylate) (PMMA) and CaCu₃Ti₄O₁₂ (CCTO) composites were fabricated via melt mixing followed by hot pressing technique. These were characterized using X-ray diffraction, thermo gravimetric, thermo mechanical, differential scanning calorimetry, fourier transform infrared (FTIR) and Impedance analyser for their structural, thermal and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. However, there was no significant difference in the glass transition (T _g ) temperature between the polymer and the composite. The appearance of additional vibrational frequencies in the range 400–600 cm^?1 in FTIR spectra indicated a possible interaction between PMMA and CCTO. The composite, with 38 vol% of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low-frequency relaxation is attributed to the interfacial polarization/MWS effect. The origin of AC conductivity particularly in the high-frequency region was attributed to the electronic polarization.     

Fabrication and characterization of cerium doped barium titanate/PMMA nanocomposites

The cerium doped barium titanate (BaTiO₃:Ce)/poly methyl methacrylate(PMMA) polymer nano-composites (PNC) were successfully fabricated via solvent evaporation method with microwaves (2.4 GHz) heating. The X-ray diffraction measurements confirm the formation of barium titanate (BT) with crystallite size ranges from 55 to 62 nm. Differential scanning calorimetry study shows that the glass transition temperature (T_g) directly affected by microwaves heat treatment and particle size of filler. The broadband dielectric spectroscopy was employed to investigate the frequency and temperature dependence of the dielectric properties of the nanocomposites in a frequency range from 75 kHz to 5 MHz and temperature range 80–400 K. The introduction of different BT fillers in PMMA enhance the dielectric constant of PNCs drastically and give a smooth response in frequency range mentioned above. The loss factor of the composite can be suppressed by using cerium doped barium titanate filler rather than pure barium titanate filler.     

Synergetic effect of thermal conductivity and flame retardancy of cyanate ester composites containing DOPO and BN with great dielectric properties

DOPO and boron nitride (BN) fillers with different particle sizes and several loadings were employed to improve the properties of cyanate ester (CE) resin. The effects of BN content and particle size on the thermal conductivity of the BN‐DOPO/CE ternary composites were discussed. The influence of enhancing the thermal conductivity of the ternary composites on their flame retardancy was studied. The consequences showed that increasing the thermal conductivity of BN‐DOPO/CE composites had an active impact on their flame retardancy. Approving flame retardancy of the ternary composites was certified by the high limiting oxygen index (LOI), UL‐94 rating of V‐0, and low heat release rate (HRR) and total heat release (THR). For instance, in contrast with pure CE matrix, peak of HRR (pk‐HRR), average of HRR (av‐HRR), THR, and average of effective heat of combustion (av‐EHC) of CEP/BN_{0.5 μm}/10 composite were decreased by 51.7%, 33.8%, 18.7%, and 18.9%, respectively. Thermal gravimetry analysis (TGA) showed that the addition of BN fillers improves the thermal stability of the composites. Moreover, the ternary composites possess good dielectric properties. Their dielectric constants (ε) are less than 3, and dielectric loss tangent (tgδ) values are lower than neat CE resin.     

FTIR study of ion dissociation in PMMA based gel electrolytes containing ammonium triflate: Role of dielectric constant of solvent

The effect of dielectric constant of solvent on the presence of ion aggregates/undissociated salt and their dissociation with the addition of polymer has been studied by FTIR for polymethylmethacrylate (PMMA) based gel electrolytes containing ammonium triflate (NH₄CF₃SO₃). Salt is fully dissociated in electrolytes containing dimethylacetamide (DMA)—a high dielectric constant solvent and some ion aggregates are also present whereas in electrolytes containing diethylcarbonate (DEC)—a low dielectric constant solvent, some undissociated salt is present. The conductivity behaviour of polymer gel electrolytes has been found to depend upon the dielectric constant of the solvent used. PMMA plays the role of a stiffener in electrolytes containing DMA and results in a small decrease in conductivity whereas in electrolytes containing DEC, the addition of PMMA results in an increase in conductivity which has been explained to be due to an increase in free ion concentration by the dissociation of undissociated salt and ion aggregates. The presence of free ions, ion aggregates, undissociated salt has also been examined by FTIR spectroscopy.     

Dielectric,magnetic and mechanical properties of ferrite composites

The dielectric and magnetic properties of carbonyl—iron (CI) and nickel zinc ferrite polymer composites were studied with respect to the ferrite particulate content and microwave frequency. From the experimental data and using empirical models that relate the composite dielectric and magnetic properties, the respective dielectric and magnetic properties of the neat fillers were estimated. The tensile properties of the particulate composites comprising CI were shown to follow qualitatively Mooney's equation for the elastic modulus. The tensile strength of an elastomeric polyurethane and PVC composites containing CI increased with particulate content, while the elongation to break decreased with filler content. SEM micrographs of tensile fracture surfaces indicated that somewhat better adhesion is obtained in the case of the polyurethane-based composites compared to the PVC ones.     

Evaluation of the (Allyl alcohol 1,2‐butoxylate‐block‐etoxylate)‐b‐PMMA Copolymers Composition by the Dielectric Measurements

Redox initiated free‐radical polymerization of methyl methacrylate (MMA) with allyl alcohol 1,2‐butoxylate‐block‐etoxylate (AABE) was carried out to yield AABE‐b‐PMMA copolymers at elevated temperatures. The composition of the copolymers depending on the polymerization temperature was qualitatively estimated by the dielectric measurements. It has been seen that AABE segment quantity decreased and PMMA segment quantity increased with increasing the polymerization temperature. The dielectric constant and the dissipation factor of the copolymers were investigated as a function of frequency and temperature. The dielectric constant and the dissipation factor were found to be strongly affected by the polymerization temperature. The highest dielectric constant in all studied temperatures and frequencies was obtained in the case of the copolymer which was prepared at 313 K. The dipolar C‐O and OH groups of the AABE segment have the primary effect on the dielectric constant. The copolymer which was prepared at 323 K, showed the highest dissipation factor near the relaxation temperature of PMMA.     

Preparation of polyimide/BaTiO3/Ag nanocomposite films via in situ technique and study of their dielectric behavior

Triphase polyimide nanocomposite films were fabricated using barium titanate （BaTiO3） with high dielectric constant and silver （Ag） with high conductivity as fillers. In situ method was utilized to obtain the homogeneous dispersion of nanoparticles. The in situ polymerization of polyimide precursor-poly（amic acid） was performed in the presence of BaTiO3 particles. Silver compound 1,1,1-trifluoro-2,4-pentadionato silver（I） was added into the BaTiO3 containing poly（amic acid） solution to achieve silver nanoparticles via in situ self metallization technique. The thermally induced reduction converted silver （I） to metallic silver with concomitant imidization of poly（amic acid） to polyimide. Both BaTiO3 and silver nanoparticles were uniformly dispersed in the polyimide substrate. The dependence of dielectric behavior on the BaTiO3 and Ag contents was studied. The incorporation of small amount of silver nanoparticles greatly increased dielectric constant of composite films.     

Effect of Tacticity of Poly(Methyl Methacrylate) on Conductivity of Poly(Ethylene Oxide)-Poly(Methyl Methacrylate) Blend-Based Polymeric Electrolytest

Abstract

Polymer electrolytes based on blends of poly(ethylene oxide) (PEO) with various stereoisomers of poly(methyl methacrylate) (PMMA) were studied by means of impedance spectroscopy and DSC. It was found that isotactic poly(methyl methacrylate) (1PMMA)-based electrolytes exhibit ambient temperature conductivities at least one order of magnitude higher than the electrolytes containing other stereoisomers of PMMA. The highest value of room temperature conductivity equal to 9 × 10^?5 S/cm was measured for a sample containing 30 wt% IPMMA. The effect observed results from the presence of a flexible amorphous phase in PEO-IPMMA blends which is favorable for fast ionic transport. A small increase of ionic conductivity with decreasing molecular weight of the added atactic poly(methyl methacrylate) was also observed.     

Disiloxane-Bridged Cyclopolymer as Polymer Dielectrics

We studied the dielectric properties of organosilicon-containing helical cyclopolymer PbMA which consists of PMMA main chains and tetramethyldisiloxane side rings. PbMA formed films with excellent uniformity through spin-coating onto highly n-doped silicon (n-Si) wafers for constructing devices of dielectric measurements, on which the dielectric properties and I-V characteristics of PbMA were studied. PbMA has a much lower dielectric constant (lower than 2.6) in the frequency range of 10-10⁵ Hz, and better thermal stability than PMMA does. I-V data showed that the metal/PbMA/n-Si devices have different conducting directions, depending on whether Au or Al deposited over PbMA layers.     

刚性有机填料同时增韧增强改性硬PVC韧性体的研究

刚性有机填料(简称ROF)是用作塑料改性剂的刚性有机聚合物,如PS、PMMA、SAN等。实验发现将少许ROF填充到硬聚氯乙烯韧性体中,能使基体的冲击强度和拉伸强度同时提高,获得既增韧又增强的双重效果。克服了传统的弹性体增韧改性损害基体强度的缺陷。     

Filled PMMA: mechanical properties and fracture behaviour

The aim of this work is to study the influence of the filler fraction and that of the filler/matrix interfacial adhesion on the mechanical properties and on the fracture behaviour of a poly(methyl methacrylate) PMMA (for injection moulding). The variation of the tensile and flexural mechanical properties with the filler volume fraction was determined. The changes in the fracture behaviour produced by the fillers were studied by evaluating the K_IC and G_IC parameters of the LEFM (Linear Elastic Fracture Mechanics) by carrying out tests with SENB geometry at room temperature and low strain rates. After fracture surfaces examination by SEM (Scanning Electron Microscopy), it was found that the surface treatment had been rather effective and that the fracture toughening mechanism was multiple crazing.     

Optical and electrical properties of copper alumina nanoparticles reinforced chlorinated polyethylene composites for optoelectronic devices

The incorporation of transition metal oxide fillers into the polymer matrix through solution mixing polymerization imparts enhanced electrical and thermal properties. The present work focused on the optical properties, crystallinity, thermal stability, temperature-dependent conductivity, dielectric constant and modulus of chlorinated polyethylene/copper alumina (CPE/Cu–Al₂O₃) nanocomposites. Optical absorption measured using an ultraviolet–visible (UV–visible) spectrometer shows enhanced intensity and a blue shift for CPE/Cu–Al₂O₃ nanocomposites. The bandgap energy of CPE/Cu–Al₂O₃ nanocomposites was lower than pure CPE and minimum bandgap energy was recorded for a 7 wt% composites. The X-ray diffraction demonstrates that Cu–Al₂O₃ nanoparticles were uniformly introduced into the CPE matrix. Thermogravimetric analysis (TGA) manifests improved thermal stability of nanocomposites. Dielectric properties decrease with frequency, whereas AC conductivity increases with frequency, and both AC conductivity and dielectric properties increase with temperature. The maximum AC conductivity and dielectric constant were obtained for 7 wt % nanofiller loaded sample. For all systems, the activation energy for electrical conductivity decreases with rising temperatures. The experimental dielectric constant values of CPE nanocomposites were correlated with different theoretical models. The Bruggeman model was in good agreement with the experimental permittivity. The impedance experiments showed a decreasing trend with temperature, indicating the semiconducting nature of prepared nanocomposites.     

Structure of reactively extruded rigid PVC/PMMA blends

A novel route for producing polymer blends by reactive extrusion is described, starting from poly (vinyl chloride)/methyl methacrylate (PVC/MMA) dry blend and successive polymerization of MMA in an extruder. Small angle X‐ray scattering (SAXS) measurements were applied to study the monomer's mode of penetration into the PVC particles and to characterize the supermolecular structure of the reactive poly(vinyl chloride)/poly(methyl methacrylate) (PVC/PMMA) blends obtained, as compared to the corresponding physical blends of similar composition. These measurements indicate that the monomer molecules can easily penetrate into the PVC sub‐primary particles, separating the PVC chains. Moreover, the increased mobility of the PVC chains enables formation of an ordered lamellar structure, with an average d‐spacing of 4.1 nm. The same characteristic lamellar structure is further detected upon compression molding or extrusion of PVC and PVC/PMMA blends. In this case the mobility of the PVC chains is enabled through thermal energy. Dynamic mechanical thermal analysis (DMTA) and SAXS measurements of reactive and physical PVC/PMMA blends indicate that miscibility occurs between the PVC and PMMA chains. The studied reactive PVC/PMMA blends are found to be miscible, while the physical PVC/PMMA blends are only partially miscible. It can be suggested that the miscible PMMA chains weaken dipole–dipole interactions between the PVC chains, leading to high mobility and resulting in an increased PVC crystallinity degree and decreased PVC glass transition temperature (T_g). These phenomena are shown in the physical PVC/PMMA blends and further emphasized in the reactive PVC/PMMA blends. Copyright © 2005 John Wiley & Sons, Ltd.