不同生长时期盐藻无机元素分析

测定了对数生长期和稳定期盐藻中10种无机元素K、Na、Ca、Mg、P、Cu、Zn、Fe、Mn、Se的含量。结果表明，稳定期盐藻中K、Ca、Mg、Cu、Zn、Fe、Mn、Se的含量比对数生长期都有不同程度的增加，Na、P的含量反而降低。     

电感耦合等离子体原子发射光谱法(ICP-AES)测定不同品种山药中矿物质元素与对比研究

采用微波消解样品,运用电感耦合等离子体原子发射光谱法同时测定山药中K,Na,Ca,Mg,Zn,Fe,Cu,Mn,Se,Pb,Cd和Cr 12种元素。结果表明:方法简便、快速、准确;山药富含对人体有益的K,Ca,Fe,Mg,Zn,Mn,Se等矿物质元素,其肉质中重金属元素Pb,Cd,Cr含量均未超过国家食品卫生标准。     

白族长寿地区硬果仁中19种元素的测定分析

用电感耦合等离子体发射光谱法（ICP－AES）,对云南省白族长寿区的葵花子仁、麻子仁和核桃仁中的Ca、Mg、P、S、Na、AI、B、Fe、Zn、Cu、Mo、Sr、Mn、Cr、Se、Ge、Cd、Pb、As等19种元素进行了测定分析。结果表明,3种硬果仁中含有丰富的人体必需的Ca、Mg、P、S、Na、Fe、Zn、Mn、Se、Cu、Cr、Sr、Mo等有益元素,且P、Mg、S、Ca、Na、Zn、Mn、Fe、Se的含量较高。这些生命元素在3种硬果仁中的含量存在差异。有害元素Cd、Pb均未检出,核桃仁中As含量较高。硬果仁中富含这些生命元素是该地区老人健康长寿的一个重要原因。     

电感耦合等离子体质谱法测定香薷中无机元素含量的研究

采用电感耦合等离子体质谱（ICP—MS）法对香薷中的Ca、Mg、Cu、Zn、Fe、Mn、Co、Ni、Se等18种无机元素进行了分析测定。该方法的回收率在84．62％～113．16％,具有良好的准确度和精密度,完全可以满足香薷样品中无机元素测定要求。研究结果表明：香薷中Ca和Mg两种必须的常量元素的含量特别高,微量元素Cu、Zn、Fe、Mn、Co、Ni、Se含量丰富。此结果可为探讨香薷中元素含量与其药效相关性提供科学依据。     

肝癌及癌旁组织中微量元素含量研究

为探讨肝癌患者的癌、癌旁和正常组织中微量元素含量的变化 ,收集了 3 0例肝癌患者的癌、癌旁及正常组织 ,应用等离子体发射光谱仪测定了Se、Zn、Cu、Fe、Mg、Mn、Mo的含量。结果表明 ,肝癌患者的正常、癌旁、癌组织Se、Zn、Mg、Mo的含量和Se/Cu、Zn/Cu、Fe/Cu、Mg/Cu、Mo/Cu的比值逐渐降低 (P <0 0 1～ 0 0 5 ) ,但Cu、Mn的含量则相反逐渐升高 ,Fe的含量和Mn/Cu的比值无显著差异 (P >0 0 5 )。本研究提示 ,微量元素含量的变化与肝癌发生、发展有相关性 ,对癌变过程的研究和临床治疗的指导具有重要意义     

微波消解/ICP—AES法测定不同品种山药中矿物质元素与对比研究

采用微波消解样品,运用电感耦合等离子体原子发射光谱法同时测定山药中K、Na、Ca、Mg、Zn、Fe、Cu、Mn、Se、Pb、Cd和Cr等12种元素。结果表明：方法简便、快速、准确度高;四种山药均富含对人体有益的K、Ca、Fe、Mg、Zn、Mn、Se等矿物质元素,其肉质中Pb、Cd、Cr含量均未超过国家食品卫生标准。     

等离子体发射光谱法测定茶水中无机元素的含量

采用电感耦合等离子体发射光谱法对茶水中的无机元素进行分析,对其中的Cu、Zn、Mn、P、Fe5种元素进行定量,讨论了等离子体发射光谱法最佳实验条件及影响茶叶中无机元素浸出量的因素。Cu、Zn、Mn、P、Fe的回收率为92．5％～103．5％,测定结果的相对标准偏差为1．34％-4．5％（n=5）。     

Graves氏病骨髓微量元素的探讨

通过原子吸收光谱技术探讨Gretves氏病人骨髓Zn、Cu、Mn、Se、Cr及Cu／Zu、Cu／Mn、Cu／Se、Cr／Zn、Cr／Mn、Cr／Se的变化，结果表明：患病组骨髓Cu、Cr、Cu／Zn、Cu／Mn，Cu／Se、Cr／Zn、Cr／Se较正常组明显升高，而Zn、Mn，Se明显降低，Cr／Mn两组比较无差异。计算机多因素逐步回归分析结果显示五种元素中Cu与T3关系最密切，六组元素比值中Cu／Se、Cr／Mu与T3关系量密切，Se元素与患者病程长短关系密切。     

恩施来凤藤茶微量元素的分析及其保健功能探讨

用原子吸收光谱法等方法测定TN茶及常用绿茶中Fe、Cu、Zn、Ca、Mg、Se、Mn、Co、K、Na、F、I的含量，发现藤茶中Fe、Cu、zn、Mg、Mn、Se、Na、F及I的含量比常用绿茶高。并根据测定的结果探讨了藤茶的保健功能。     

三七生长初期不同部位微量元素的含量测定

采用电感耦合等离子体发射光谱法(ICP-AES),对文山地区GAP种植及农户常规种植的生长初期三七不同部位中的微量元素Mg、P、Ca、Mn、Na、Fe、Co、Cu、Zn、Mo、Cr、Ni、Ge、Se等14种元素进行了测定分析。结果表明,三七的根、茎、叶中含有丰富的人体必需Mg、P、Ca、Mn、Na、Fe、Co、Cu、Zn、Mo、Ge、Se等有益元素,且P、Ca、Mg、Fe含量较高,Na、Mn、Co、Zn次之,Co、Mo、Cr、Ni、Ge、Se含量均较低。为三七GAP栽培标准和特征制订、三七道地药材的化学特征——化学指纹图谱的建立及研究提供理论依据。     

电感耦合等离子体原子发射光谱(ICP-AES)法测定高纯铝中Fe、Cu、Mg、Zn、Ti

建立了用电感耦合等离子体原子发射光谱(ICP-AES)法测定高纯铝中Fe、Cu、Mg、Zn、Ti的方法。详细讨论了基体元素和共存元素对分析元素的光谱干扰,以及盐酸用量的影响;选择了合适的分析谱线,同时得出了各元素的检出限。证明用基体匹配的方法在Fe 259.940nm、Cu 327.396nm、Mg279.079nm、Zn 213.856nm、Ti 334.941nm处可准确、可靠地测定高纯铝中含量范围在0.001%~0.01%的Fe、Cu、Mg、Zn、Ti元素。     

Analysis of Th, U, Pu, and Am in radioactive metal waste using extraction chromatography

In order to analyze actinide elements in radioactive metal waste, the dissolution and chemical separation conditions were optimized. The surfaces of a type 304 stainless steel plate and of pipe waste sampled from the prototype advanced thermal reactor (Fugen) were dissolved in mixed acid solution (HNO₃:HCl:H₂O = 1:1:4). The resulting solution was evaporated to dryness and dissolved with 2 mol/dm³ of HNO₃ to prepare sample solutions. In order to analyze trivalent actinide elements in the sample solution containing a large amount of Fe(III) (>0.1 g) using TRU resin, the effect of Fe(III) concentration on the recovery of Am(III) and reduction effect of Fe(III) to Fe(II) with ascorbic acid were studied. On the basis of results of this study, chemical separation scheme was constructed and Pu and Am in the sample solutions were separated. Thorium and U in the sample solutions were separated with UTEVA resin. High recoveries for all experimented elements were obtained from the analysis of spiked sample solutions, the effectiveness of the method was confirmed.     

X-ray fluorescence determination of As, Bi, Co, Cu, Fe, Ni, Pb, Se, V and Zn in natural water and soil extracts after preconcentration of their pyrrolidinedithiocarbamates on cellulose filters

A simple method for the elements preconcentration on thin-layer paraffin-treated cellulose filters was proposed. It was found that pyrrolydinedithiocarbamates of As(III), Bi, Cd, Co, Cu, Fe(III), Ni, Pb, Se(IV), V(V) and Zn obtained after mixing of sample (3-5 ml min⁻¹) and reagent (0.7-1.0 ml min⁻¹) streams were quantitatively recovered from 100 ml sample. The sample acidity was adjusted to pH 4.8-5.2 for preconcentration of Cd, Co, Cu, Fe(III), Ni, Pb, V(V) and Zn, and to 2 M HCl for preconcentration of As, Bi and Se. The optimum reagent concentration was found to be 0.1%. The elements were determined on the filters by X-ray fluorescence spectrometry. The detection limits achieved were 0.1-4.0 μg of element on the filter. Relative standard deviation (R.S.D.) was not higher than 0.08 while determining 5-50 μg of elements on filter. Accuracy and precision of the technique proposed were evaluated by the analysis of spiked natural samples.     

The Effect of Ge,Ni, and Fe Doping on the Ga Activity in the CoGa B2 Phase

Summary. Gallium activity in the B2 (CsCl-type) phase of ternary Co–Ga–X (X = Ge, Ni, and Fe) alloys was measured by the EMF method with a stabilized zirconia solid electrolyte. The temperature range was 1050–1250 K and the concentrations of the added elements were 2–6 at-% Ge and Ni, and 1–3 at-% Fe. The reference electrodes were Fe,Fe_xO or Ga,Ga₂O₃. The effect on the activity of gallium in the B2 phase with the addition of other elements was found to be the largest with Ge and the smallest in the case of Ni.     

Determination of trace amounts of cadmium, cobalt, chromium, iron, molybdenum, nickel, selenium, titanium, vanadium and zinc in blood and milk by neutron activation analysis

The concentrations of Cd, Co, Cr, Fe, Mo, Ni, Se, Ti, V and Zn in biological fluids, human blood serum and market milk were determined by neutron activation analysis, with enrichment by coprecipitation. The pre-concentration of these trace elements was accomplished by converting the dissolved trace metal ions into their pyrrolidinedithiocarbamate (1-pyrrolidinecarbodithioate) chelates, followed by coprecipitation with a metal carrier such as Ni, Pb or Bi. The coprecipitation was carried out prior to irradiation for the short-lived nuclides (V, Ti and Se) and after irradiation for the other elements. The validity of the method was checked using certified biological reference materials; the concentrations of trace elements found by the proposed method agreed well with the published certified data. The limits of detection for Cd, Co, Cr, Fe, Mo, Ni, Se (obtained through the long-lived isotope 75Se) and Zn under the present experimental conditions were found to be 5, 5, 10, 520, 5, 70, 10 and 150 ng, respectively, for 5 ml of biological liquor. The limits of detection for Ti and V obtained (through their short-lived radionuclides 51Ti and 52V, respectively) were found to be 180 and 1.4 ng, respectively, for 50 ml of market milk, or 70 and 0.7 ng for 1 ml of blood serum.     

The Effect of Ge, Ni, and Fe Doping on the Ga Activity in the CoGa B2 Phase

Gallium activity in the B2 (CsCl-type) phase of ternary Co–Ga–X (X = Ge, Ni, and Fe) alloys was measured by the EMF method with a stabilized zirconia solid electrolyte. The temperature range was 1050–1250 K and the concentrations of the added elements were 2–6 at-% Ge and Ni, and 1–3 at-% Fe. The reference electrodes were Fe,Fe_xO or Ga,Ga₂O₃. The effect on the activity of gallium in the B2 phase with the addition of other elements was found to be the largest with Ge and the smallest in the case of Ni.     

X射线荧光光谱法测定电解锰中锰、硅、磷和铁含量

熔融制样X射线荧光光谱法测定电解锰中锰、硅、磷和铁含量。用熔融后的四硼酸锂制作铂金坩埚保护层,以BaO2做氧化剂,在马弗炉内通过逐渐升温来氧化电解锰,然后熔融制取玻璃熔片,用X射线荧光(XRF)光谱法分析电解锰中锰、硅、磷和铁含量。锰、硅、磷和铁的相对标准偏差RSD分别为0.23%、2.82%、0.31%和0.53%。与其它分析方法比较,其结果更稳定。有效消除了电解锰熔融制样过程中的坩埚腐蚀问题,分析误差可完全控制在国家相关标准允许的范围内,实现了电解锰中各元素的快速准确测定。     

ICP-AES法测定大蒜中的铁、锰、铜、锌、铝和锶等微量元素

用ICP-AES法测定了大蒜中铝、铜、铁、锰、锶和锌等六种微量元素，试验了大蒜样品的分解方法，讨论了钙和磷对测定元素的干扰和溶液酸度对测定结果的影响，并进行了样品分析的精密度和准确度试验。用该法成功地进行了实际样品测定。     

The determination of cadmium,copper, iron,lead and zinc in aerosols by atomic-absorption spectrometry

The determination of five elements in filter papers loaded with air particulate matter has been investigated. After a wet destruction of about 10 cm² of filter material by a standard procedure, analysis was carried out with a flame atomic absorption method for zinc and a flameless procedure for Cd, Cu, Fe and Pb. Furnace program parameters for each of the elements in different acid solutions are reported. The interferences of some common anions and the most abundant cations in aerosol material are described. For some urban and industrial samples, the results are compared with those obtained by energy-dispersive x-ray fluorescence. Accuracy was checked against standard samples.     

Quantitative analysis of elements (C, N, O, Al, Si and Fe) in polyamide with wavelength dispersive X-ray fluorescence spectrometry

A wavelength dispersive X-ray fluorescence (WD-XRF) spectrometry combined with calibration curve method was established for simultaneously analyzing low-Z elements (C,N,O) and Al,Si,Fe in polyamide.To investigate the origin of plastic material causing deposition and blocking in instrument engines and pipelines,polyamide 6 (PA 6,an engineering plastic) was chosen as the study object on account of its common use in industry.The sample preparation with pressed powder disk has been developed for determination of six elements in PA 6.Pure Cu metal was used as the matrix and PA 6 was regarded as standard sample for C,N,O elements.PA 6 particles were firstly smashed to uniform powder in liquid nitrogen,and then mixed with inorganic standard powders (Fe2O3,Al2O3,SiO2,and Na 2 SiO 3).The mixture was ground to obtain homogeneous calibration materials for WD-XRF analysis.The quantitative property of the calibration curve method for each element was reliable.The limits of detection (S/N≤3) of C,N,O,Al,Si and Fe using WD-XRF were 249,120,101,6.2,3.3,and 1.8 μg/g,respectively.To confirm the accuracy of the proposed WD-XRF calibration curve method,inductively coupled plasma optical emission spectroscopy (ICP-OES) detection for Al,Si,Fe and elemental analyzer (EA) analysis for C,N,O were utilized.A good correlation of the WD-XRF results with the measurements of ICP-OES and EA was observed.