Supercritical fluid extraction and clean-up of organochlorine pesticides in Chinese herbal medicine

A method involving the simultaneous extraction and clean-up of 13 organochlorine pesticides (OCPs) from Chinese herbal medicines (CHMs) was developed using supercritical fluid extraction (SFE) followed by gas chromatography-electron capture detection and mass spectrometric confirmation. The pesticides in the study consisted of alpha-, beta-, gamma-, and delta-benzene hexachloride, heptachlor, aldrin, heptachlor epoxide, endosulfan I, 4,4'-DDE (1,1-dichloro-2,2-bis(p-chlorophenyl)ethene), dieldrin, endrin, 4,4'-DDD (1,1-dichloro-2,2-bis(p-chlorophenyl)ethane), endosulfan II, 4,4'-DDT (2,2-bis(p-chlorophenyl)1,1,1-trichloroethane), endrin aldehyde, and endosulfan sulfate. A series of experiments was conducted to optimize the final extraction conditions [pure CO2, 250 atm extraction pressure (1 atm = 101,325 Pa), 50 degrees C extraction temperature, 5 min static extraction time, 20 min dynamic extraction time, 2.0-g Florisil sorbent on top of 0.1-g samples, 12-ml n-hexane eluting at 1 ml/min, and a 10-ml extraction vessel]. Florisil sorbent was placed with the sample in the SFE vessel to provide a facile and effective clean-up approach. Mean recoveries of 78-121% with reproducibilities of 5-31% were obtained for the pesticides except for endosulfan II, endosulfan sulfate and endrin aldehyde. The simple and rapid method may be used to determine OCPs in CHMs routinely, and in fact, was used to analyze CHMs sold in Taiwan.     

Determination of organochlorine and pyrethroid pesticides in fruit and vegetables using solid phase extraction clean-up cartridges

A method to determine six organochlorine and three pyrethroid pesticides in grape, orange, tomato, carrot and green mustard based on solvent extraction followed by solid phase extraction (SPE) clean-up is described. The pesticides were spiked into the sample prior to analysis, extracted with ethyl acetate, evaporated and reconstituted with a solvent mixture of acetone:n-hexane (3:7). Three different sorbents (Strong Anion Exchanger/Primary Secondary Amine (SAX/PSA), Florisil and C18) were used for the clean-up step. Pesticides were eluted with 5mL of acetone:n-hexane (3:7, v/v) and determined by gas chromatography and electron-capture detection (GC-ECD). SAX/PSA was the sorbent, which provided chromatograms with less interference and the mean recoveries obtained were within 70-120% except for captafol. The captafol recoveries for grape were within acceptable range with C18 clean-up column.     

Simultaneous determination of eight pesticide residues in coconut using MSPD and GC/MS

A simple and effective extraction method based on matrix solid-phase dispersion (MSPD) was developed to determine dimethoate, malathion, lufenuron, carbofuran, 3-hydroxycarbofuran, thiabendazole, difenoconazole and trichlorfon in coconut pulp using gas chromatography-mass spectrometry with selected ion monitoring (GC/MS, SIM). Different parameters of the method were evaluated, such as type of solid-phase (C(18), alumina, silica-gel and Florisil), the amount of solid-phase and eluent (dichloromethane, acetone, ethyl acetate, acetonitrile, n-hexane and n-hexane:ethyl acetate (1:1, v/v)). The best results were obtained using 0.5 g of coconut pulp, 1.0 g of C(18) as dispersant sorbent, 1.0 g of Florisil as clean-up sorbent and acetonitrile saturated with n-hexane as eluting solvent. The method was validated using coconut pulp samples fortified with pesticides at different concentration levels (0.25-1.0 mg kg(-1)). Average recoveries (four replicates) ranged from 70.1% to 98.7%, with relative standard deviations between 2.7% and 14.7%, except for lufenuron and difenoconazole, for which recoveries were 47.2% and 48.2%, respectively. Detection and quantification limits for coconut pulp ranged from 0.02 to 0.17 mg kg(-1) and from 0.15 to 0.25 mg kg(-1), respectively.     

Miniaturized Salting-Out Assisted Liquid-Liquid Extraction Combined with Disposable Pipette Extraction for Fast Sample Preparation of Neonicotinoid Pesticides in Bee Pollen

As the main source of nutrients for the important pollinator honeybee, bee pollen is crucial for the health of the honeybee and the agro-ecosystem. In the present study, a new sample preparation procedure has been developed for the determination of neonicotinoid pesticides in bee pollen. The neonicotinoid pesticides were extracted using miniaturized salting-out assisted liquid-liquid extraction (mini-SALLE), followed by disposable pipette extraction (DPX) for the clean-up of analytes. Effects of DPX parameters on the clean-up performance were systematically investigated, including sorbent types (PSA, C18, and silica gel), mass of sorbent, loading modes, and elution conditions. In addition, the clean-up effect of classical dispersive solid-phase extraction (d-SPE) was compared with that of the DPX method. Results indicated that PSA-based DPX showed excellent clean-up ability for the high performance liquid chromatography (HPLC) analysis of neonicotinoid pesticides in bee pollen. The proposed DPX method was fully validated and demonstrated to provide the advantage of simple and rapid clean-up with low consumption of solvent. This is the first report of DPX method applied in bee pollen matrix, and would be valuable for the development of a fast sample preparation method for this challenging and important matrix.     

大米中多种残留农药的固相萃取-气相色谱-质谱分析

建立了一种同时测定大米中有机氯、有机磷、氨基甲酸酯和拟除虫菊酯等4类农药残留量的分析方法。通过比较二氯甲烷、三氯甲烷、乙腈、乙酸乙酯和不同比例的己烷-丙酮混合溶剂等8种溶剂的提取效果,选择以二氯甲烷为提取溶剂;以Florisil固相萃取小柱净化,通过以不同比例的己烷-丙酮作洗脱溶剂,发现体积比为4∶1的己烷-丙酮的洗脱效果最佳,在选定的洗脱条件下,样品的净化效果良好;用气相色谱-质谱测定,以保留时间、选择离子及其相对丰度定性,以外标法定量。以低限加标样品的3倍信噪比确定方法的检出限(LODs),以两个添加水平测定样品的回收率和相对标准偏差(RSD)。该方法的检出限达到μg/kg水平;除敌敌畏、乐果、pp′-DDT等几种农药外,大多数农药的加标回收率在75%和120%之间,RSD均低于10.4%,r≥0.992。该方法简便、快速、灵敏,能够满足同时测定大米中多种类残留农药的要求,可以作为大米中农药多残留的例行分析和确证分析的方法。     

Microwave-assisted extraction and large-volume injection gas chromatography tandem mass spectrometry determination of multiresidue pesticides in edible seaweed

A microwave-assisted extraction method followed by clean-up with solid-phase extraction (SPE) combined with large-volume injection gas chromatography–tandem mass spectrometry (LVI-GC-MS/MS) for the analysis of 17 pesticides in wild and aquaculture edible seaweeds has been developed. An experimental central composite design was employed to evaluate the effects of the main variables potentially affecting the extraction (temperature, time, and solvent volume) and to optimize the process. The most effective microwave extraction conditions were achieved at 125 °C and 12 min with 24 mL of hexane/ethyl acetate (80:20). SPE clean-up of the extracts with graphitized carbon and Florisil, optimized by means of the experimental design, proved to be efficient in the removal of matrix interferences. The analytical recoveries were close to 100% for all the analytes, with relative standard deviations lower than 13%. The limits of detection ranged from 0.3 to 23.1 pg g⁻¹ and the limits of quantification were between 2.3 and 76.9 pg g⁻¹, far below the maximum residue levels established by the European Union for pesticides in seaweed. The results obtained prove the suitability of the microwave-assisted extraction for the routine analysis of pesticides in aquaculture and wild seaweed samples.     

Multiresidue analysis of pesticides in animal liver by gas chromatography using triple quadrupole tandem mass spectrometry

Two methods for extracting organochlorine (OCs) and organophosphorus (OPs) pesticides from animal liver have been developed. The determination was carried out by gas chromatography with electron impact ionization tandem mass spectrometry (GC-(EI-)MS/MS) using a triple quadrupole (QqQ) analyzer. First, a liquid-solid extraction performed with a high-speed homogenizer (Polytron) using ethyl acetate as solvent, and a subsequent clean-up by gel permeation chromatography (GPC) was applied, determining 34 pesticides. Secondly, a matrix solid phase dispersion (MSPD) extraction with octadecylsilyl (C(18)) sorbent combined with a Florisil clean-up and ethyl acetate elution was performed, analyzing 25 compounds. These methodologies have been tested and compared in the sample pre-treatment due to the fatty nature of the matrix. The GPC method was finally selected and validated, yielding recoveries in the range 70-115%, with precision values expressed as relative standard deviation (RSD) lower or equal to 20%, at the spiking levels of 25 and 50 microg kg(-1), and limits of quantification (LOQs) lower than the maximum residue levels (MRLs) set by the European Union in animal products, except for isofenphos. Linearity was also studied ranging between 5 and 300 microg kg(-1) for most of pesticides. This method was applied to the analysis of real liver samples of chicken, pork and lamb.     

Determination of organochlorine pesticide residues in foods using solid-phase extraction clean-up cartridges

Fourteen organochlorine pesticide residues in fatty foods were determined using a simple and rapid procedure based on solid-phase extraction (SPE) clean-up cartridges with octadecyl (C18)-bonded porous silica, a tandem C18 and Florisil column, Alumina-N and Florisil. A Florisil cartridge eluted with 12 ml petroleum ether-ethyl ether (95 + 5) was the most efficient clean-up procedure capable of eliminating the matrix interference and satisfying the agreed acceptable recovery for the large numbers of organochlorine pesticides in nine kinds of foods having different fat contents. Average recoveries of organochlorine pesticides in shellfish, fish and meats ranged from 77 to 105%, 84 to 98% and 85 to 107%, respectively. In addition, analysis of a certified Standard Reference Material (SRM 1945) verified the satisfactory performance of Florisil clean-up cartridge. This SPE method not only yielded comparable results for nonfatty foods, but also provided a reliable separation and quantification of organochlorine pesticides for analyzing a large number of foods with a wide range of fat content.     

Microwave-assisted extraction versus Soxhlet extraction in the analysis of 21 organochlorine pesticides in plants

A method to determine 21 organochlorine pesticides in vegetation samples using microwave-assisted extraction (MAE) is described and compared with Soxhlet extraction. Samples were extracted with hexane–acetone (1:1, v/v) and the extracts were cleaned using solid-phase extraction with Florisil and alumine as adsorbents. Pesticides were eluted with hexane–ethyl acetate (80:20, v/v) and determined by gas chromatography and electron-capture detection. Recoveries obtained (75.5–132.7% for Soxhlet extraction and 81.5–108.4% for MAE) show that both methods are suitable for the determination of chlorinated pesticides in vegetation samples. The method using microwave energy was applied to grass samples from parks of A Coruña (N.W. Spain) and to vegetation from the contaminated industrial area of Torneiros (Pontevedra, N.W. Spain).     

Supercritical fluid extraction and clean-up of organochlorine pesticides and polychlorinated biphenyls in mussels

The simultaneous extraction and clean-up of mussel samples followed by gas chromatography with electron-capture detection and mass spectrometric confirmation of 15 organochlorine pesticides (OCPs) and 11 polychlorinated biphenyls (PCBs) is developed using Florisil sorbent in the supercritical fluid extraction cell. The method detection limits vary from 1 to 10 ng/g for OCPs and from 2 to 15 ng/g for PCBs. Mean reproducibilities of 11% and 10% and mean recoveries of 80% and 53%, respectively, for OCPs and PCBs are obtained. The feasibility of the proposed supercritical fluid extraction method was confirmed by analyzing a certified reference material and mussels collected from Taiwan region. The method is simple, rapid and requires only small amounts of samples and solvents. It may serve as a screening protocol for the determination of OCPs and PCBs in mussels on a routine basis.     

An absorbing microwave micro-solid-phase extraction device used in non-polar solvent microwave-assisted extraction for the determination of organophosphorus pesticides

A single-step extraction-cleanup method, including microwave-assisted extraction (MAE) and micro-solid-phase extraction (μ-SPE), was developed for the extraction of ten organophosphorus pesticides in vegetable and fruit samples. Without adding any polar solvent, only one kind of non-polar solvent (hexane) was used as extraction solvent in the whole extraction step. Absorbing microwave μ-SPE device, was prepared by packing activated carbon with microporous polypropylene membrane envelope, and used as not only the sorbent in μ-SPE, but also the microwave absorption medium. Some experimental parameters effecting on extraction efficiency was investigated and optimized. 1.0 g of sample, 8 mL of hexane and three absorbing microwave μ-SPE devices were added in the microwave extraction vessel, the extraction was carried out under 400 W irradiation power at 60 °C for 10 min. The extracts obtained by MAE-μ-SPE were directly analyzed by GC–MS without any clean-up process. The recoveries were in the range of 93.5–104.6%, and the relative standard deviations were lower than 8.7%.     

Simplified method for the determination of organochlorine pesticides in honey.

A method is described for the detection and quantitative determination of organochlorine pesticides in honey. After extraction with hexane, the pesticides were cleaned-up by adsorption chromatography on a Florisil Sep-Pak cartridge and eluted with 15% diethyl ether in hexane. The detection of organochlorine pesticides was performed by capillary gas chromatography with electron-capture detection. The quantification limit obtained for different pesticides ranged from 0.56 to 2.78 micrograms kg-1 and recoveries from fortified honey samples averaged 89.6%.     

Solid phase extraction GC/ECD method for the analysis of organochlorine pesticides in wildlife plasma

A gas chromatographic method for the analysis of nine organo-chlorine pesticides in wildlife plasma is described. Reversed-phase solid phase extraction is utilized to extract the organochlorine pesticides from plasma. This is followed by a normal phase solid phase extraction clean-up as the pesticides are recovered by elution with hexane:ethyl ether (1:1) and quantified by gas chromatogra-phy/electron capture detection. Method limits of detection range from 7.0–25 μg/L. The mean recovery for all pesticides is 81%.     

Selective pressurized liquid extraction for multi-residue analysis of organochlorine pesticides in soil

A selective pressurized liquid extraction (SPLE) procedure capable of performing simultaneous extraction and clean-up has been demonstrated for multi-residue analysis of organochlorine pesticides (OCPs) in soil. The final method was performed at 100 degrees C for 3 x 10 min using acetone/n-heptane (1:1, v/v). Florisil was placed inside the extraction cell downstream the sample to remove interfering compounds. Extraction of two soil samples by SPLE gave a recovery which was over 80% for beta-endosulfan, endosulfan sulfate, p,p'-DDT and p,p'-DDE compared to PLE with off-line clean-up. The same trend was observed when applying the SPLE method to a certified reference soil sample (CRM 811-050) containing 13 OCPs, where the SPLE method gave 80-90% recovery vis-à-vis the PLE method with off-line clean-up. Feasibility of the SPLE method was further demonstrated by applying it to five real soil samples collected in Ethiopia.     

Determination of brominated diphenyl ethers (from mono- to hexa- congeners) in indoor dust by pressurised liquid extraction with in-cell clean-up and gas chromatography–mass spectrometry

This study presents a selective pressurised liquid extraction (PLE) and gas chromatography–mass spectrometry/mass spectrometry method for the determination of brominated diphenyl ethers (BDEs) in indoor dust. Selective PLE consisted of the addition of Florisil mixed with the sample in order to perform an in-cell clean-up. This approach provided a cleaner and almost colourless extract, ready to be injected in the gas chromatograph. The PLE conditions were studied using an experimental design, firstly a 4 × 3 × 2 multifactor categorical design to screen sorbent, solvent and temperature and then a central composite design to optimise sorbent mass, temperature and time. Finally, the number of extraction cycles was studied. The selected conditions were 4 g of Florisil all mixed with the sample and no additional clean-up sorbent layer, 1:1 n-hexane-dichloromethane, 60% flush volume, 40 °C, 1,500 psi, 2-min static time and one cycle. The proposed method allowed accurate determination of BDEs, with recovery values between 82% and 101% and detection limits between 0.06 and 0.24 ng g⁻¹. It also has advantages over other existing methods in terms of simplicity, automation, analysis time and solvent consumption.     

气相色谱-质谱法分析蜂蜜中的多种农药残留

开展了蜂蜜中23种农药残留的气相色谱-电子轰击离子源质谱(GC-EI/MS)分析方法的研究,并对其中3种农药的EI/MS碎片离子的断裂机理与结构进行了初步解析。探讨了蜂蜜试样前处理条件的优化与选择。将蜂蜜试样用乙酸乙酯提取剂超声提取、Florisil硅藻土色谱柱净化和正己烷-乙酸乙酯(体积比为7∶3)混合洗脱剂洗脱后,以PCB103为内标物,采用选择离子监测(SIM)方式下的GC-EI/MS分析。当试样的加标浓度为50,100和200 μg/kg时,加标回收率为82%～120%,相对标准偏差小于11.0%。23种农药的检测限都小于10.0 μg/kg,线性范围为10～500 μg/kg,相关系数都大于0.995。此分析方法已成功地应用于蜂蜜中23种痕量农药残留的分析。     

Determination of pesticide residues in olives and olive oil by matrix solid-phase dispersion followed by gas chromatography/mass spectrometry and liquid chromatography/tandem mass spectrometry

A novel analytical approach has been developed and evaluated for the quantitative analysis of a selected group of widely used pesticides (dimethoate, simazine, atrazine, diuron, terbuthylazine, methyl-parathion, methyl-pirimiphos, endosulfan I, endosulfan II, endosulfan sulphate, cypermethrin and deltamethrin), which can be found at trace levels in olive oil and olives. The proposed methodology is based on matrix solid-phase dispersion (MSPD), (with a preliminary liquid-liquid extraction in olive oil samples) using aminopropyl as sorbent material with a clean-up performed in the elution step with Florisil, followed by mass spectrometric identification and quantitation of the selected pesticides using both gas chromatography-mass spectrometry (GC-MS) in selected ion monitoring (SIM) mode and liquid chromatography tandem mass spectrometry (LC-MS-MS) in positive ionization mode. The recoveries obtained (with mean values between 85 and 115% (obtained at different fortification levels) with RSD values below 10% in most cases, confirm the usefulness of the proposed methodology for the analyses of these kind of complex samples with a high fat content. Moreover, the obtained detection limits, which were below 5 microg kg(-1) by LC-MS analyses and ranged from 10 to 60 microg kg(-1) by GC-MS meet the requirements established by the olive oil pesticide regulatory programs. The method was satisfactorily applied to different olives and olive oil samples.     

High-pressure liquid chromatographic analysis of carbofuran and two non-conjugated metabolites in crops as fluorescent dansyl derivatives

Carbofuran, and non-conjugated 3-hydroxycarbofuran and 3-ketocarbofuran were extracted from carrots, corn and potatoes with acetone and partitioned into hexane-methylene chloride. The organic extract was evaporated to a small volume for clean-up on a 2% deactivated Florisil column. All three carbamates were eluted with 15% acetone in hexane. The pesticide residues were hydrolysed to their corresponding phenols with 0.1 M sodium carbonate followed by derivatization with dansyl chloride in acetone. The derivatives were extracted and analysed by high-pressure liquid chromatography with fluorescence detection (excitation, 360 nm; emission, greater than 400 nm). Absolute recoveries for all three compounds were between 50 and 65% for spiked samples by the extraction method used. Detection limits approached 0.01 ppm in the foods studied.     

Response surface optimization for determination of pesticide multiresidues by matrix solid-phase dispersion and gas chromatography

An optimized multiresidue analysis method based on matrix solid-phase dispersion (MSPD) and gas chromatography (GC) is proposed for the determination of organochlorines and pyrethroids in the tea samples. Response surface methodology (RSM) was used to optimize the extraction conditions of MSPD, such as the sorbent type, eluent composition, dichloromethane concentration and eluting volume. Desirability function approach was employed to optimize the pesticide recoveries and matrix cleanup. Compromising the recoveries and cleanup degree, MSPD was carried out with Florisil as the sorbent and n-hexane-dichloromethane (1:1, v/v) as the eluent. The pesticide recoveries in tea samples were better than 80% spiked in the concentration range of 0.01-0.05mg/kg and the relative standard deviations were lower than 7%. The quantification limits of the pesticides were in the range of 0.002-0.06mg/kg, which were lower than the maximum residue limits of the pesticides in tea samples established by the European Union.     

Multiresidue analysis of pesticides in fruits and vegetables using solid-phase extraction and gas chromatographic methods

A new extraction and cleanup procedure with gas chromatography was developed for the sensitive determination of acephate, dimethoate, malathion, diazinon, quinalphos, chlorpyrifos, profenofos, alpha-endosulfan, beta-endosulfan, chlorothalonil and carbaryl using 1-chloro-4-fluorobenzene as an internal standard in fruits and vegetables. Several extracting and eluting solvents for solid-phase extraction were investigated. The overall extracting solvent with a mixture of acetone:ethyl acetate:hexane (10:80:10, v/v/v) and a eluting solvent of 5% acetone in hexane used with the RPC18 cartridge gave the best recovery for all of the investigated pesticides, and minimized the interference from co-extractants. Under the optimal extraction and clean-up conditions, recoveries of 85 - 99% with RSD < 5.0% (n = 3) for most of the pesticides at the 0.02 - 0.5 mg/kg level were obtained. The limit of detection was between 0.005 - 0.01 mg/kg and the limit of quantification was 0.01 mg/kg. This analytical procedure was characterized with high accuracy and acceptable sensitivity to meet requirements for monitoring pesticides in crops.