Improvement of the Visible‐Light Photocatalytic Performance of TiO2 by Carbon Mesostructures

An improvement in the photodegradation performance for dyes due to interaction between carbon and titania in a self‐assembled mesoporous C? TiO₂ composite catalyst, even for the difficult degradation of azo dyes, is reported herein. The dye removal process involves adsorption of the dye from water by the mesoporous carbon–titania, followed by photodegradation on the separated dye‐loaded solid. Such adsorption–catalysis cycles can be carried out more than 80 times without discernible loss of photocatalytic activity or the anatase content of the composite. In each run, about 120 mg dye per g catalyst can be degraded. The mesoporous carbon–titania catalyst also exhibits a high capacity for converting methyl orange in aqueous solution under visible light. Characterization by XRD, TEM, and N₂ sorption techniques has revealed that the self‐assembled composite catalyst has an ordered mesostructure, uniform mesopores (4.3 nm), a large pore volume (0.30 cm³ g^?1), and a high surface area (348 m² g^?1). The pore walls are composed of amorphous carbon and anatase nanoparticles of size 4.2 nm, which are well dispersed and confined. X‐ray photoelectron spectroscopy (XPS), surface photovoltage spectroscopy (SPS), and UV/Vis absorption results indicate doping of carbon into the anatase lattice and a change in the bandgap of the semiconductor. The synergistic improvement in the composite catalyst can be attributed to the following features: (1) carbon doping of the anatase lattice modifies its bandgap and enhances its activity under visible light; (2) confinement within carbon pore walls prevents aggregation of tiny anatase nanoparticles, improving their activity and stability; (3) the mesopores provide a confined space for photocatalysis; and (4) the strong adsorption ability of porous carbon for organic substances ensures that large quantities can be processed and inhibits further diffusion of the adsorbed organic substances, thereby enhancing the mineralization on anatase.     

Spiky Mesoporous Anatase Titania Beads: A Metastable Ammonium Titanate‐Mediated Synthesis

A complex titania nanostructure of monodisperse spiky mesoporous anatase beads composed of anatase nanocrystals with diameters of less than 15 nm in the core and much larger hollow‐cone shaped spikes on the surface was fabricated using a facile solvothermal process in the presence of ammonia. This proceeded through a controllable phase transformation from an amorphous titania to a metastable amorphous titania/ammonium titanate core‐shell structure then finally to anatase titania. The size of the spiky anatase nanostructures can be increased from approximately 55×100 nm to 160×410 nm (square edge×length) by increasing the ammonia concentration used in the solvothermal treatment step from 2.2 to 17.4 wt. %. Such hollow‐cone shaped nanostructures, as revealed by HRTEM characterization, are single crystals elongated along the c axis of the tetragonal anatase titania. The resultant spiky titania beads have high surface areas of up to 112 m²g^?1 and pore diameters and pore volumes that vary depending on the ammonia concentration and solvothermal treatment time. The morphological evolution and crystallization process of the spiky titania beads was investigated using SEM and XRD techniques. A metastable amorphous titania/ammonium titanate core‐shell structure evolved from the smooth amorphous precursor beads producing a “fluffy” titanate intermediate, on further heating the final spiky mesoporous titania beads were clearly observed. This titanate‐phase‐mediated approach allows control over the size of the nanocrystals in the core of the bead, as well as the anatase spikes on the surface, and thereby, tuning of the surface area and porosity of the resultant products. The spiky mesoporous titania beads have been used to prepare working electrodes for dye‐sensitized solar cells achieving a solar to electric power conversion efficiency of 10.30 %, indicating their potential for application in the photovoltaic field. Such complex titania nanostructures would have a number of other possible applications, such as photocatalysis, lithium ion batteries, and catalysis.     

Rapid Fabrication of Mesoporous Titania Films with Controlled Macroporosity to Improve Photocatalytic Property

Hierarchically porous titania films were fabricated by dual templating using a triblock copolymer such as Pluronic F127 and polystyrene (PS) beads, affording mesoporous films with controlled macroporosity. The presence of the triblock copolymer in the precursor solutions suppressed a regular accumulation of spherical PS beads, and PS‐derived macropores could be dispersed over the whole mesoporous titania film through rapid fabrication by spin‐coating. Some of the macropores were clustered, but the presence of the large spaces was important for keeping the mesostructure after calcination. Photodegradation of methylene blue (MB) was investigated by using the photoactive anatase films. The photodegradation of MB over the porous anatase films was accelerated by effective diffusion of MB molecules in the PS‐derived macropores, but it was important for improving photocatalytic performance to regulate the balance between the effectiveness of the diffusion in the macropores and the decrease of the surface area from the embedded macropores, as well as the reduction in the transparency of the porous films.     

Mesostructured Dye‐Doped Titanium Dioxide for Micro‐Optoelectronic Applications

Optically transparent, mesostructured titanium dioxide thin films were fabricated using an amphiphilic poly(alkylene oxide) block copolymer template in combination with retarded hydrolysis of a titanium isopropoxide precursor. Prior to calcination, the films displayed a stable hexagonal mesophase and high refractive indices (1.5 to 1.6) relative to mesostructured silica (1.43). After calcination, the hexagonal mesophase was retained with surface areas >300 m² g^?1. The dye Rhodamine 6G (commonly used as a laser dye) was incorporated into the copolymer micelle during the templating process. In this way, novel dye‐doped mesostructured titanium dioxide films were synthesised. The copolymer not only directs the film structure, but also provides a solubilizing environment suitable for sustaining a high monomer‐to‐aggregate ratio at elevated dye concentrations. The dye‐doped films displayed optical thresholdlike behaviour characteristic of amplified spontaneous emission. Soft lithography was successfully applied to micropattern the dye‐doped films. These results pave the way for the fabrication and demonstration of novel microlaser structures and other active optical structures. This new, high‐refractive index, mesostructured, dye‐doped material could also find applications in areas such as optical coatings, displays and integrated photonic devices.     

Europium‐Doped Mesoporous Titania Thin Films: Rare‐Earth Locations and Emission Fluctuations under Illumination

Herein, Eu^III‐doped 3D mesoscopically ordered arrays of mesoporous and nanocrystalline titania are prepared and studied. The rare‐earth‐doped titania thin films—synthesized via evaporation‐induced self‐assembly (EISA)—are characterized by using environmental ellipsoporosimetry, electronic microscopy (i.e. high‐resolution scanning electron microscopy, HR‐SEM, and transmission electron microscopy, HR‐TEM), X‐ray diffraction, and luminescence spectroscopy. Structural characterizations show that high europium‐ion loadings can be incorporated into the titanium‐dioxide walls without destroying the mesoporous arrangement. The luminescence properties of Eu^III are investigated by using steady‐state and time‐resolved spectroscopy via excitation of the Eu^III ions through the titania host. Using Eu^III luminescence as a probe, the europium‐ion sites can be addressed with at least two different environments within the mesoporous framework, namely, a nanocrystalline environment and a glasslike one. Emission fluctuations (⁵D₀→⁷F₂) are observed upon continuous UV excitation in the host matrix. These fluctuations are attributed to charge trapping and appear to be strongly dependent on the amount of europium and the level of crystallinity.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.     

Enhanced photoactivity of neodymium doped mesoporous titania synthesized through aqueous sol–gel method

Nanosize neodymium doped titania has been prepared by hydrolysis of titanium oxychloride followed by peptisation under acidic condition. The anatase to rutile phase transformation temperature was found to increase by 150 °C as a result of neodymium doping. The doped sample shows 10 times higher surface area than the undoped one after calcining at 700 °C. All the samples calcined at 500, 600 and 700 °C show type IV isotherm, which is characteristic of mesoporous material. The pore size distribution curves also show that the pores are in mesoporous region. Further, the neodymium doped titania shows increased photoactivity than the undoped titania with respect to decomposition of methylene blue when subjected to UV light. The transmission electron micrograph indicates that a nanocrystalline doped titania is obtained through the present method. The effect of neodymium doping on the anatase phase stability, specific surface area and photoactivity are reported.     

硫和银共掺杂介孔TiO2的制备表征及光催化活性

以P123为模板,以钛酸四正丁酯、硝酸银和硫脲为原料采用模板法制备了一系列硫和银共掺杂介孔TiO2光催化材料。利用扫描电子显微镜（SEM）、X射线衍射（XRD）、BET和紫外-可见光谱（UV-Vis）等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征。以甲基橙溶液的光催化降解为模型反应, 考察了不同掺杂量的样品在紫外和可见光下的光催化性能。结果表明：用模板法制备的共掺杂介孔TiO2光催化材料在紫外和可见光条件下较纯介孔TiO2和单掺杂介孔TiO2对甲基橙溶液具有更好的光催化降解效果, 且硫和银的掺杂量及样品焙烧温度显著影响该材料的催化性能。当硫掺杂量为2%（mol）和银掺杂量为1%（mol）,在500℃焙烧2 h所得光催化材料的催化性能最佳, 4 h即可使甲基橙的降解率达98.8%,重复使用4次仍可使甲基橙的降解率保持在87.5%以上。因此, 以该模板合成法, 通过硫和银的共掺杂有望使TiO2成为一种低或无能耗、高活性的绿色环保型催化材料。     

Hierarchical‐Structured Anatase‐Titania/Cellulose Composite Sheet with High Photocatalytic Performance and Antibacterial Activity

Bulk hierarchical anatase‐titania/cellulose composite sheets were fabricated by subjecting an ultrathin titania gel film pre‐deposited filter paper to a solvo‐co‐hydrothermal treatment by using titanium butoxide as the precursor to grow anatase‐titania nanocrystallites on the cellulose nanofiber surfaces. The titanium butoxide specie is firstly absorbed onto the nanofibers of the cellulose substance through a solvothermal process, which was thereafter hydrolyzed and crystallized upon the subsequent hydrothermal treatment, leading to the formation of fine anatase‐titania nanoparticles with sizes of 2–5 nm uniformly anchored on the cellulose nanofibers. The resulting anatase‐titania/cellulose composite sheet shows a significant photocatalytic performance towards degradation of a methylene blue dye, and introduction of silver nanoparticles into the composite sheet yields an Ag‐NP/anatase‐titania/cellulose composite material possessing excellent antibacterial activity against both Gram‐positive and Gram‐negative bacteria.     

The Critical Effect of Niobium Doping on the Formation of Mesostructured TiO2: Single‐Crystalline Ordered Mesoporous Nb‐TiO2 and Plate‐like Nb‐TiO2 with Ordered Mesoscale Dimples

Highly ordered mesoporous niobium‐doped TiO₂ with a single‐crystalline framework was prepared by using silica colloidal crystals with ca. 30 nm in diameter as templates. The preparation of colloidal crystals composed of uniform silica nanoparticles is a key to obtain highly ordered mesoporous Nb‐doped TiO₂. The XPS measurements of Nb‐doped TiO₂ showed the presence of Nb⁵⁺ and correspondingly Ti³⁺. With the increase in the amount of doped Nb, the crystalline phase of the product was converted from rutile into anatase, and the lattice spacings of both rutile and anatase phases increased. Surprisingly, the increase in the amount of Nb led to the formation of plate‐like TiO₂ with dimpled surfaces on one side, which was directly replicated from the surfaces of the colloidal silica crystals.     

Visible light photocatalyst: iodine-doped mesoporous titania with a bicrystalline framework

Iodine-doped (I-doped) mesoporous titania with a bicrystalline (anatase and rutile) framework was synthesized by a two-step template hydrothermal synthesis route. I-doped titania with anatase structure was also synthesized without the use of a block copolymer as a template. The resultant titania samples were characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infrared, nitrogen adsorption, transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-visible absorption spectroscopy. Both I-doped titania samples, with and without template, show much better photocatalytic activity than commercial P25 titania in the photodegradation of methylene blue under the irradiation of visible light (>420 nm) and UV-visible light. Furthermore, I-doped mesoporous titania with a bicrystalline framework exhibits better activity than I-doped titania with anatase structure. The effect of rutile phase in titania on the adsorptive capacity of water and surface hydroxyl, and photocatalytic activity was investigated in detail. The excellent performance of I-doped mesoporous titania under both visible light and UV-visible light can be attributed to the combined effects of bicrystalline framework, high crystallinity, large surface area, mesoporous structure, and high visible light absorption induced by I-doping.     

Aerosol-assisted fabrication of mesoporous titania spheres with crystallized anatase structures and investigation of their photocatalitic properties

We demonstrate practical aerosol-assisted approach to synthesize spherical mesoporous titania particles with high surface areas. Scanning electron microscopy observation of the spray-dried products clearly shows spherical morphology. To remove surfactants and enhance crystallinity, the spray-dried products are calcined under various temperatures. The crystalline structures inside the particles are carefully detected by wide-angle XRD measurements. With increase of the calcination temperatures, anatase crystal growth proceeds and transformation from anatase to rutile is occurred. The effect of various calcination temperatures on the mesostructures is also studied by using N₂ adsorption desorption isotherms. The mesoporous titania particles calcined at 350, 400, and 500 °C exhibit type IV isotherms with a capillary condensation step and shows a hysteresis loop, which is a characteristic of mesoporous materials. The reduction in the surface areas and the pore volumes is confirmed by increasing the calcination temperatures, while the average pore diameters are increased gradually. This is attributed to the distortion of the mesostructures due to the grain growth of the anatase phase and the transformation to the rutile phase during the calcination process. As a preliminary experimental photocatalytic activity, oxidative decomposition of acetaldehyde under UV irradiation is examined. The mesoporous titania calcined at 400 °C shows the highest photocatalytic activity, due to both high surface area and well-developed anatase crystalline phase.     

Anatase formation during the synthesis of mesoporous titania and its photocatalytic effect

Thermally stable mesoporous titania can be synthesized following different synthesis routes. In this paper, mesoporous titania was synthesized applying the evaporation-induced self-assembly (EISA) method. The mesostructured titania was treated with an NH(4)OH solution to increase the thermal stability. The influence of this postsynthesis treatment on the anatase formation was investigated using different initial synthesis conditions. Mesoporous titania was synthesized under both acidic and basic conditions, with hexadecylamine and cetyltrimethylammonium bromide as surfactants. The samples were investigated with FT-Raman to investigate when exactly anatase was formed during the synthesis. It will be shown that the anatase formation depends mainly on the initial synthesis conditions. This study shows that anatase can already be formed before calcination under certain circumstances. Furthermore, the accessibility of the anatase phase influenced the photocatalytic activity.     

Tuning the Surface Structure of Nitrogen‐Doped TiO2 Nanofibres—An Effective Method to Enhance Photocatalytic Activities of Visible‐Light‐Driven Green Synthesis and Degradation

Nitrogen‐doped TiO₂ nanofibres of anatase and TiO₂(B) phases were synthesised by a reaction between titanate nanofibres of a layered structure and gaseous NH₃ at 400–700 °C, following a different mechanism than that for the direct nitrogen doping from TiO₂. The surface of the N‐doped TiO₂ nanofibres can be tuned by facial calcination in air to remove the surface‐bonded N species, whereas the core remains N doped. N‐Doped TiO₂ nanofibres, only after calcination in air, became effective photocatalysts for the decomposition of sulforhodamine B under visible‐light irradiation. The surface‐oxidised surface layer was proven to be very effective for organic molecule adsorption, and the activation of oxygen molecules, whereas the remaining N‐doped interior of the fibres strongly absorbed visible light, resulting in the generation of electrons and holes. The N‐doped nanofibres were also used as supports of gold nanoparticle (Au NP) photocatalysts for visible‐light‐driven hydroamination of phenylacetylene with aniline. Phenylacetylene was activated on the N‐doped surface of the nanofibres and aniline on the Au NPs. The Au NPs adsorbed on N‐doped TiO₂(B) nanofibres exhibited much better conversion (80 % of phenylacetylene) than when adsorbed on undoped fibres (46 %) at 40 °C and 95 % of the product is the desired imine. The surface N species can prevent the adsorption of O₂ that is unfavourable for the hydroamination reaction, and thus, improve the photocatalytic activity. Removal of the surface N species resulted in a sharp decrease of the photocatalytic activity. These photocatalysts are feasible for practical applications, because they can be easily dispersed into solution and separated from a liquid by filtration, sedimentation or centrifugation due to their fibril morphology.     

Mesoporous Titania Thin Film with Highly Ordered and Fully Accessible Vertical Pores and Crystalline Walls

We report the preparation of mesoporous titania thin films with the R m pore structure derived from the Im m self‐assembled ordering of the titania species and an EO₁₀₆PO₇₀EO₁₀₆ triblock copolymer. The films were spin‐cast and then aged at 18 °C at a relative humidity of 70 %, which led to the orientation of the Im m structure with the [111] direction perpendicular to the substrates. The [111] body‐diagonal channels became vertical channels upon calcination at 400 °C, thus leading to thin films with vertical channels. The pores are ordered over a large area of up to 1 μm². The titania films can be formed on various types of substrates. By using a titania film formed on a Pt‐coated Si wafer as a template, we produced by an electrochemical‐deposition technique arrays of gold nanowires, whose morphology suggests that most of the pores of the titania thin films are accessible. The pore structure of vertical channels is stable up to 600 °C, at which temperature the wall materials crystallize into anatase.     

Hierarchical,Titania‐Coated,Carbon Nanofibrous Material Derived from a Natural Cellulosic Substance

Hierarchical, titania‐coated, nanofibrous, carbon hybrid materials were fabricated by employing natural cellulosic substances (commercial filter paper) as a scaffold and carbon precursor. Ultrathin titania films were firstly deposited by means of a surface sol–gel process to coat each nanofiber in the filter paper, and successive calcination treatment under nitrogen atmosphere yielded the titania–carbon composite possessing the hierarchical morphologies and structures of the initial paper. The ultrathin titania coating hindered the coalescence effect of the carbon species that formed during the carbonization process of cellulose, and the original cellulose nanofibers were converted into porous carbon nanofibers (diameters from tens to hundreds of nanometers, with 3–6 nm pores) that were coated with uniform anatase titania thin films (thickness ≈12 nm, composed of anatase nanocrystals with sizes of ≈4.5 nm). This titania‐coated, nanofibrous, carbon material possesses a specific surface area of 404 m² g^?1, which is two orders of magnitude higher than the titania–cellulose hybrid prepared by atomic layer deposition of titania on the cellulose fibers of filter paper. The photocatalytic activity of the titania–carbon composite was evaluated by the improved photodegradation efficiency of different dyes in aqueous solutions under high‐pressure, fluorescent mercury‐lamp irradiation, as well as the effective photoreduction performance of silver cations to silver nanoparticles with ultraviolet irradiation.     

含 TiO2(B) 介孔氧化钛材料的制备、特性和应用

 综述了近年来本课题组依据材料化学工程研究思想, 对含 TiO2(B)(一种比金红石和锐钛矿相结构更松散的氧化钛晶型) 介孔氧化钛材料在制备、结构和性能方面所取得的研究进展. 该介孔材料由二钛酸钾经水合、离子交换和热处理得到, 具有良好原子尺度晶格匹配界面特征的锐钛矿和 TiO2(B) 核壳结构. 研究表明, 该介孔材料在兼备高比表面积、高晶化孔壁和高热稳定性的同时, 还表现出良好的纳米颗粒担载稳定性, 在光催化、油品加氢精制、药物载体、固体酸催化和电化学电容器等方面已凸显出良好的应用潜力和推广价值. 目前该新型含 TiO2(B) 介孔氧化钛材料已经实现低成本、规模化制备.     

Soft‐Templating Synthesis of N‐Doped Mesoporous Carbon Nanospheres for Enhanced Oxygen Reduction Reaction

The development of ordered mesoporous carbon materials with controllable structures and improved physicochemical properties by doping heteroatoms such as nitrogen into the carbon framework has attracted a lot of attention, especially in relation to energy storage and conversion. Herein, a series of nitrogen‐doped mesoporous carbon spheres (NMCs) was synthesized via a facile dual soft‐templating procedure by tuning the nitrogen content and carbonization temperature. Various physical and (electro)chemical properties of the NMCs have been comprehensively investigated to pave the way for a feasible design of nitrogen‐containing porous carbon materials. The optimized sample showed a favorable electrocatalytic activity as evidenced by a high kinetic current and positive onset potential for oxygen reduction reaction (ORR) due to its large surface area, high pore volume, good conductivity, and high nitrogen content, which make it a highly efficient ORR metal‐free catalyst in alkaline solutions.     

Gold Nanoparticles Supported on Mesoporous Titania Thin Films with High Loading as a CO Oxidation Catalyst

In the present work, 2.4 nm gold nanoparticles (Au NPs) are uniformly dispersed on mesoporous titania thin films which are structurally tuned by controlling the calcination temperature. The gold content of the catalyst is as high as 27.8 wt %. To our knowledge, such a high loading of Au NPs with good dispersity has not been reported until now. Furthermore, the reaction rate of the gold particles is enhanced by one order of magnitude when supported on mesoporous titania compared to non‐porous titania. This significant improvement can be explained by an increase in the diffusivity of the substrate due to the presence of mesopores, the resistance to agglomeration, and improved oxygen activation.     

Synthesis of mesoporous nano-TiO<Subscript>2</Subscript> doped with Sn by auto-assembly method and photo-catalytic property

Frank and Bard firstly reported that suspending TiO2 powder could photo-catalyze the solution con-taining CN?. Research on photo-degradation of delete-rious pollutants with nano-semiconductor material has become one of the most popular topics. Owing to it…