SINGULAR SOLUTIONS OF ANISOTROPIC PLATE WITH AN ELLIPTICAL HOLE OR A CRACK

In the present paper, closed form singular solutions for an infinite anisotropic plate with an elliptic hole or crack are derived based on the Stroh-type formalism for the general anisotropic plate. With the solutions, the hoop stresses and hoop moments around the elliptic hole as well as the stress intensity factors at the crack tip under concentrated in-plane stresses and bending moments are obtained. The singular solutions can be used for approximate analysis of an anisotropic plate weakened by a hole or a crack under concentrated forces and moments.They can also be used as fundamental solutions of boundary integral equations in BEM analysis for anisotropic plates with holes or cracks under general force and boundary conditions.     

Head-on collision between two hydroelastic solitary waves with Plotnikov-Toland's plate model

Head-on collision between two hydroelastic solitary waves propagating at the surface of an incompressible and ideal fluid covered by a thin ice sheet is analytically studied by means of a singular perturbation method. The ice sheet is represented by the Plotnikov-Toland model with the help of the special Cosserat theory of hyperelastic shells and the Kirchhoff-Love plate theory,which yields the nonlinear and conservative expression for the bending forces. The shallow water assumption is taken for the fluid motion with the Boussinesq approximation. The resulting governing equations are solved asymptotically with the aid of the Poincaré-Lighthill-Kuo method,and the solutions up to the third order are explicitly presented. It is observed that solitary waves after collision do not change their shapes and amplitudes. The wave profile is symmetric before collision, and it becomes, after collision, unsymmetric and titled backward in the direction of wave propagation. The wave profile significantly reduces due to greater impacts of elastic plate and surface tension. A graphical comparison is presented with published results, and the graphical comparison between linear and nonlinear elastic plate models is also shown as a special case of our study.     

ANALYTICAL SOLUTIONS TO STRESS CONCENTRATION PROBLEM IN PLATES CONTAINING RECTANGULAR HOLE UNDER BIAXIAL TENSIONS

The stress concentration problem in structures with a circular or elliptic hole can be investigated by analytical methods. For the problem with a rectangular hole, only approximate results are derived. This paper deduces the analytical solutions to the stress concentration problem in plates with a rectangular hole under biaxial tensions. By using the U-transformation technique and the finite element method, the analytical displacement solutions of the finite element equations are derived in the series form. Therefore, the stress concentration can then be discussed easily and conveniently. For plate problem the bilinear rectangular element with four nodes is taken as an example to demonstrate the applicability of the proposed method. The stress concentration factors for various ratios of height to width of the hole are obtained.     

Closed form solutions for free vibrations of rectangular Mindlin plates

A new two-eigenfunctions theory, using the amplitude deflection and the generalized curvature as two fundamental eigenfunctions, is proposed for the free vibration solutions of a rectangular Mindlin plate. The three classical eigenvalue differential equations of a Mindlin plate are reformulated to arrive at two new eigenvalue differential equations for the proposed theory. The closed form eigensolutions, which are solved from the two differential equations by means of the method of separation of variables are identical with those via Kirchhoff plate theory for thin plate, and can be employed to predict frequencies for any combinations of simply supported and clamped edge conditions. The free edges can also be dealt with if the other pair of opposite edges are simply supported. Some of the solutions were not available before. The frequency parameters agree closely with the available ones through pb-2 Rayleigh-Ritz method for different aspect ratios and relative thickness of plate.     

Static and dynamic responses of a microcantilever with a T-shaped tip mass to an electrostatic actuation

In this study, nonlinear static and dynamic responses of a microcantilever with a T-shaped tip mass excited by electrostatic actuations are investigated. The electrostatic force is generated by applying an electric voltage between the horizontal part of T-shaped tip mass and an opposite electrode plate. The cantilever microbeam is modeled as an Euler–Bernoulli beam. The T-shaped tip mass is assumed to be a rigid body and the nonlinear effect of electrostatic force is considered. An equation of motion and its associated boundary conditions are derived by the aid of combining the Hamilton principle and Newton's method.An exact solution is obtained for static deflection and mode shape of vibration around the static position. The differential equation of nonlinear vibration around the static position is discretized using the Galerkin method. The system mode shapes are used as its related comparison functions. The discretized equations are solved by the perturbation theory in the neighborhood of primary and subharmonic resonances.In addition, effects of mass inertia, mass moment of inertia as well as rotation of the T-shaped mass, which were ignored in previous works, are considered in the analysis. It is shown that by increasing the length of the horizontal part of the T-shaped mass, the amount of static deflection increases,natural frequency decreases and nonlinear shift of the resonance frequency increases. It is concluded that attaching an electrode plate with a T-shaped configuration to the end of the cantilever microbeam results in a configuration with larger pull-in voltage and smaller nonlinear shift of the reso-nance frequency compared to the configuration in which the electrode plate is directly attached to it.     

Combined heat and mass transfer by mixed convection MHD flow along a porous plate with chemical reaction in presence of heat source

An exact and a numerical solutions to the problem of a steady mixed convective MHD flow of an incompressible viscous electrically conducting fluid past an infinite vertical porous plate with combined heat and mass transfer are presented.A uniform magnetic field is assumed to be applied transversely to the direction of the flow with the consideration of the induced magnetic field with viscous and magnetic dissipations of energy.The porous plate is subjected to a constant suction velocity as well as a uniform mixed stream velocity.The governing equations are solved by the perturbation technique and a numerical method.The analytical expressions for the velocity field,the temperature field,the induced magnetic field,the skin-friction,and the rate of heat transfer at the plate are obtained.The numerical results are demonstrated graphically for various values of the parameters involved in the problem.The effects of the Hartmann number,the chemical reaction parameter,the magnetic Prandtl number,and the other parameters involved in the velocity field,the temperature field,the concentration field,and the induced magnetic field from the plate to the fluid are discussed.An increase in the heat source/sink or the Eckert number is found to strongly enhance the fluid velocity values.The induced magnetic field along the x-direction increases with the increase in the Hartmann number,the magnetic Prandtl number,the heat source/sink,and the viscous dissipation.It is found that the flow velocity,the fluid temperature,and the induced magnetic field decrease with the increase in the destructive chemical reaction.Applications of the study arise in the thermal plasma reactor modelling,the electromagnetic induction,the magnetohydrodynamic transport phenomena in chromatographic systems,and the magnetic field control of materials processing.     

The exact solution of Stokes＇ second problem including start-up process with fractional element

The start-up process of Stokes＇ second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady oscillation. Exact solutions are obtained by using Laplace transform and Fourier transform. It is found that the relationship between the first peak value and the one of equal-amplitude oscillations depends on the distance from the plate. The amplitude decreases for increasing frequency and increasing distance.     

Green’s function for T-stress of semi-infinite plane crack

Green’s function for the T-stress near a crack tip is addressed with an analytic function method for a semi-infinite crack lying in an elastical, isotropic, and infinite plate. The cracked plate is loaded by a single inclined concentrated force at an interior point. The complex potentials are obtained based on a superposition principle, which provide the solutions to the plane problems of elasticity. The regular parts of the potentials are extracted in an asymptotic analysis. Based on the regular parts, Gre...     

Visco-elastic fluid flow past an infinite vertical porous plate in the presence of first-order chemical reaction

An analysis has been developed to study the unsteady free convection flow of an incompressible visco-elastic fluid on a continuously moving vertical porous plate in the presence of a first-order chemical reaction. The governing equations are solved numerically using an implicit finite difference technique. The obtained numerical solutions are compared with the analytical solutions. The velocity profiles are presented. A parametric analysis is performed to illustrate the influences of the visco-elastic parameter, the dimensionless chemical reaction parameter, and the plate moving velocity on the steady state velocity profiles, the time dependent friction coefficient, the Nusselt number, and the Sherwood number.     

VIBRATION AND ACOUSTIC RADIATION FROM SUBMERGED STIFFENED SPHERICAL SHELL WITH DECK-TYPE INTERNAL PLATE

Based on the motion differential equations of vibration and acoustic coupling system for thin elastic spherical shell with an elastic plate attached to its internal surface, in which Dirac-δ functions are employed to introduce the moments and forces applied by the attachment on the surface of shell, by means of expanding field quantities as Legendre series, a semi-analytic solution is derived for the vibration and acoustic radiation from a submerged stiffened spherical shell with a deck-type internal plate, which has a satisfactory computational effectiveness and precision for an arbitrary frequency range. It is easy to analyze the effect of the internal plate on the acoustic radiation field by using the formulas obtained by the method proposed. It is concluded that the internal plate can significantly change the mechanical and acoustic characteristics of shell, and give the coupling system a very rich resonance frequency spectrum. Moreover, the method can be used to study the acoustic radiation mechanism in similar structures as the one studied here.     

三层薄板的热屈曲测量及特征反演

The paper presents a new study on a tri-layer thin plate. Shadow moiré implemented with an advanced phase unwrapping technique is employed to obtain actual flexural deformation of a real-life plate sample subjected to thermal loads. An analytical model is re-formulated to provide the plate with global closed-form solutions of the plate deflection as well as the interfacial stress and strain. With the measurements and the solutions available, an inverse iterative approach is developed to evaluate and maximize the correlation between the measured and the predicted thermal flexure, leading to ascertained materials' constitutive and thermal behaviour. The inverse search algorithm starts with estimated ranges of material property parameters and progressively updates them to finally approach the respective true values. The established model solutions along with the optimized material properties matrix enable the prediction of the interfacial stresses/strains for the specific plate sample under evaluation.     

Nodal predictive error model and Bayesian approach for thermal diffusivity and heat source mapping

This article aims at solving a two-dimensional inverse heat conduction problem in order to retrieve both the thermal diffusivity and heat source field in a thin plate. A spatial random heat pulse is applied to the plate and the thermal response is analysed. The inverse approach is based on the minimisation of a nodal predictive error model, which yields a linear estimation problem. As a result of this approach, the sensitivity matrix is directly filled with experimental data, and thus is partially noisy. Bayesian estimators, such as the Maximum A Posteriori and a Markov Chain Monte Carlo approach (Metropolis–Hastings), are implemented and compared with the Ordinary Least Squares solution. Simulated temperature measurements are used in the inverse analysis. The nodal strategy relies on the availability of temperature measurements with fine spatial resolution and high frequency, typical of nowadays infrared cameras. The effects of both the measurement errors and of the model errors on the inverse problem solution are also analysed.     

Thermo-elastic solutions for multilayered wide plates and beams with interfacial imperfections through the transfer matrix method

A matrix technique is formulated to efficiently solve stationary two-dimensional thermo-elasticity problems in simply supported multilayered beams and plates with an arbitrary number of layers which may be in imperfect mechanical and thermal contact. The method uses local transfer matrices and continuity conditions at the layer interfaces to establish explicit relationships between the unknown integration constants in the solution of a generic layer and those of the first layer. Explicit expressions are then derived for temperature, displacements and stresses through the imposition of the boundary conditions at the top and bottom surfaces of the plate. The dimensionless expressions allow to easily generate exact solutions, also for plates with many layers and interfacial thermal and mechanical imperfections. The solutions can be used for parametric analyses, to investigate the influence of the inhomogeneous material structure and interfacial imperfections on local fields or to verify the accuracy of approximate theories and numerical models.     

Solution of the moiré hole drilling method using a finite-element-method-based approach

The moiré hole drilling method in a biaxially loaded infinite plate in plane stress is an inverse problem that exhibits a dual nature: the first problem results from first drilling the circular hole and then applying the biaxial loads, while the other problem arises from doing the opposite, i.e., first applying the biaxial load and then drilling the circular hole. The first problem is hardly ever addressed in the literature but implies that either separation of stresses or material property identification may be achieved from interpreting the moiré signature around the hole. The second is the well-known problem of determination of residual stresses from interpreting the moiré fringe orders around the hole. This paper addresses these inverse problem solutions using the finite element method as the means to model the plate with a hole, rather than the typical approach using the Kirsch solution, and a least-squares optimization approach to resolve for the quantities of interest. To test the viability of the proposed method three numerical simulations and one experimental result in a finite width plate are used to illustrate the techniques. The results are found to be in excellent agreement. The simulations employ noisy data to test the robustness of this approach. The finite-element-method-based inverse problem approach employed in this paper has the potential for use in applications where the specimen shape and boundary conditions do not conform to symmetric or well-used shapes. Also, it is a first step in testing similar procedures in three-dimensional samples to assess the residual stresses in materials.     

A nonlinear inverse problem for the prediction of local thermal contact conductance in plate finned-tube heat exchangers

A nonlinear inverse problem utilizing the Conjugate Gradient Method (CGM) of minimization is used successfully to estimate the temporally and circumferentially varying thermal contact conductance of a plate finned-tube heat exchanger by reading the simulated transient temperature measurement data from the thermocouples located on the plate. The thermal properties of the fin and tube are assumed to be functions of temperature, and this makes the problem nonlinear. It is assumed that no prior information is available on the functional form of the unknown thermal contact conductance in the present study, thus, it is classified as the function estimation in the inverse calculation. The accuracy of the inverse analysis is examined by using the simulated temperature measurements. Finally the inverse solutions with and without the consideration of temperature-dependent thermal properties are compared. Results show that when the nonlinear inverse calculations are performed an excellent estimation on the thermal contact conductance can be obtained with any arbitrary initial guesses within a couple of minute's CPU time on a HP-730 workstation.     

A generalized multilength scale nonlinear composite plate theory with delamination

A new type of plate theory for the nonlinear analysis of laminated plates in the presence of delaminations and other history-dependent effects is presented. The formulation is based on a generalized two length scale displacement field obtained from a superposition of global and local displacement effects. The functional forms of global and local displacement fields are arbitrary. The theoretical framework introduces a unique coupling between the length scales and represents a novel two length scale or local-global approach to plate analysis. Appropriate specialization of the displacement field can be used to reduce the theory to any currently available, variationally derived, displacement based (discrete layer, smeared, or zig-zag) plate theory.The theory incorporates delamination and/or nonlinear elastic or inelastic interfacial behavior in a unified fashion through the use of interfacial constitutive (cohesive) relations. Arbitrary interfacial constitutive relations can be incorporated into the theory without the need for reformulation of the governing equations. The theory is sufficiently general that any material constitutive model can be implemented within the theoretical framework. The theory accounts for geometric nonlinearities to allow for the analysis of buckling behavior.The theory represents a comprehensive framework for developing any order and type of displacement based plate theory in the presence of delamination, buckling, and/or nonlinear material behavior as well as the interactions between these effects.The linear form of the theory is validated by comparison with exact solutions for the behavior of perfectly bonded and delaminated laminates in cylindrical bending. The theory shows excellent correlation with the exact solutions for both the inplane and out-of-plane effects and the displacement jumps due to delamination. The theory can accurately predict the through-the-thickness distributions of the transverse stresses without the need to integrate the pointwise equilibrium equations. The use of a low order of the general theory, i.e. use of both global and local displacement fields, reduces the computational expense compared to a purely discrete layer approach to the analysis of laminated plates without loss of accuracy. The increased efficiency, compared to a solely discrete layer theory, is due to the coupling introduced in the theory between the global and local displacement fields.     

Cohesive zone modeling of interfacial stresses in plated beams

The elastic analysis of interfacial stresses in plated beams has been the subject of several investigations. These studies provided both first-order and higher-order solutions for the distributions of interfacial shear and normal stresses close to the plate end in the elastic range. The notable attention devoted to this topic was driven by the need to develop predictive models for plate end debonding mechanisms, as the early models of this type adopted debonding criteria based on interfacial stresses. Currently, approaches based on fracture mechanics are becoming increasingly established. Cohesive zone modeling bridges the gap between the stress- and energy-based approaches. While several cohesive zone analyses of bonded joints subjected to mode-II loading are available, limited studies have been conducted on cohesive zone modeling of interfacial stresses in plated beams. Moreover, the few available studies present complex formulations for which no closed-form solutions can be found. This paper presents an analytical cohesive zone model for the determination of interfacial stresses in plated beams. A first-order analysis is conducted, leading to closed-form solutions for the interfacial shear stresses. The mode-II cohesive law is taken as bilinear, as this simple shape is able to capture the essential properties of the interface. A closed-form expression for the debonding load is proposed, and the comparison between cohesive zone modeling and linear-elastic fracture mechanics predictions is discussed. Analytical predictions are also compared with results of a numerical finite element model where the interface is described with zero-thickness contact elements, using the node-to-segment strategy and incorporating decohesion and contact within a unified framework.     

层合材料的非傅里叶热传导及热应力

论文建立了一个双层材料层合板受瞬态加热情况下的非傅里叶热传导分析模型,用向后差分法得到了温度场的数值解,并对该差分格式的稳定性进行了讨论.给出了温度场随导热时间、热扩散率、空间与时间步长之比以及弛豫时间的变化趋势.同时,通过已经求得的温度场,求得了层合板内的应力场,给出了层合板内的热应力随时间的变化.     

黄土中压力型锚索锚固段应力分析

为研究黄土地区压力型锚索锚固机理,根据压力型锚索锚固段受力状态,基于三线型剪切-滑移模型,推导了注浆体与岩土体界面在弹性阶段所对应的剪应力及轴向应力分布的闭合解．根据相关压力型锚索锚固试验数据,采用推导的闭合解计算了不同张拉荷载作用下界面的剪应力分布,并与试验结果进行了对比．结果表明,各级张拉荷载作用下注浆体/岩土体界面剪应力的分布及其最大值与试验结果基本吻合,验证了本文提出解析模型的正确性与可靠性;压力型锚索锚固界面剪应力呈指数分布规律,在承压板附近剪应力分布集中且应力较大,随着离承压板距离的增大,剪应力逐渐减小;压力型锚索锚固界面剪应力峰值随外荷载增大而增大．研究结果可为压力型锚索的设计和计算提供一种理论参考．     

Nonlinear vibration analysis of piezo-thermo-electrically actuated functionally graded circular plates

A theoretical model for geometrically nonlinear vibration analysis of thermo-piezoelectrically actuated circular plates made of functionally grade material (FGM) is presented based on Kirchhoff’s–Love hypothesis with von-Karman type geometrical large nonlinear deformations. The material properties of the FG core plate are assumed to be graded in the thickness direction according to the power-law distribution in terms of the volume fractions of the constituents. Dynamic equations and boundary conditions including thermal, elastic and piezoelectric couplings are formulated and solutions are derived. An exact series expansion method combined with perturbation approach is used to model the nonlinear thermo-electro-mechanical vibration behavior of the structure. Control of the FG plate’s nonlinear deflections and natural frequencies using high control voltages is studied and their nonlinear effects are evaluated. Numerical results for FG plates with various mixtures of ceramic and metal are presented in dimensionless forms. A parametric study is also undertaken to highlight the effects of the thermal environment, applied actuator voltage and material composition of the FG core plate on the nonlinear vibration characteristics of the composite structure.