ANLYTICAL SOLUTION OF THERMOELASTIC DAMPING IN RECTANGULAR MINDLIN MICRO PLATES 1)

首次给出了四边简支的 Mindlin 矩形微板热弹性阻尼的解析解. 基于考虑一阶剪切变形的 Mindlin 板理论和单向耦合热传导理论建立了微板热弹性耦合自由振动控制微分方程. 忽略温度梯度在面内的变化,在上下表面绝热边界条件下求得了用变形几何量表示的温度场的解析解. 进一步将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的四阶偏微分方程. 利用特征值问题之间在数学上的相似性,在四边简支条件下给出了用无阻尼 Kirchhoff 微板的固有频率表示的 Mindlin 矩形微板的复频率解析解,从而利用复频率法求得了反映热弹性阻尼水平的逆品质因子. 最后,通过数值结果定量地分析了剪切变形、材料以及几何参数对热弹性阻尼的影响 规律. 结果表明,Mindlin 板理论预测的热弹性阻尼小于 Kirchhoff 板理论预测的热弹性阻尼. 两种理论预测的热弹性阻尼之间的差值在临界厚度附近十分显著. 另外,随着微板的边/厚比增大,Mindlin 微板的热弹性阻尼最大值单调增大,而 Kirchhoff 微板的热弹性阻尼最大值却保持不变.     

Mindlin 矩形微板的热弹性阻尼解析解

首次给出了四边简支的 Mindlin 矩形微板热弹性阻尼的解析解. 基于考虑一阶剪切变形的 Mindlin 板理论和单向耦合热传导理论建立了微板热弹性耦合自由振动控制微分方程. 忽略温度梯度在面内的变化,在上下表面绝热边界条件下求得了用变形几何量表示的温度场的解析解. 进一步将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的四阶偏微分方程. 利用特征值问题之间在数学上的相似性,在四边简支条件下给出了用无阻尼 Kirchhoff 微板的固有频率表示的 Mindlin 矩形微板的复频率解析解,从而利用复频率法求得了反映热弹性阻尼水平的逆品质因子. 最后,通过数值结果定量地分析了剪切变形、材料以及几何参数对热弹性阻尼的影响 规律. 结果表明,Mindlin 板理论预测的热弹性阻尼小于 Kirchhoff 板理论预测的热弹性阻尼. 两种理论预测的热弹性阻尼之间的差值在临界厚度附近十分显著. 另外,随着微板的边/厚比增大,Mindlin 微板的热弹性阻尼最大值单调增大,而 Kirchhoff 微板的热弹性阻尼最大值却保持不变.      

An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates

In this article, an analytical solution for buckling of moderately thick functionally graded (FG) sectorial plates is presented. It is assumed that the material properties of the FG plate vary through the thickness of the plate as a power function. The stability equations are derived according to the Mindlin plate theory. By introducing four new functions, the stability equations are decoupled. The decoupled stability equations are solved analytically for both sector and annular sector plates with two simply supported radial edges. Satisfying the edges conditions along the circular edges of the plate, an eigenvalue problem for finding the critical buckling load is obtained. Solving the eigenvalue problem, the numerical results for the critical buckling load and mode shapes are obtained for both sector and annular sector plates. Finally, the effects of boundary conditions, volume fraction, inner to outer radius ratio (annularity) and plate thickness are studied. The results for critical buckling load of functionally graded sectorial plates are reported for the first time and can be used as benchmark.     

功能梯度材料明德林矩形微板的热弹性阻尼

功能梯度材料微板谐振器热弹性阻尼的建模和预测是此类新型谐振器热?弹耦合振动响应的新课题. 本文采用数学分析方法研究了四边简支功能梯度材料中厚度矩形微板的热弹性阻尼. 基于明德林中厚板理论和单向耦合热传导理论建立了材料性质沿着厚度连续变化的功能梯度微板热弹性自由振动控制微分方程. 在上下表面绝热边界条件下采用分层均匀化方法求解变系数热传导方程, 获得了用变形几何量表示的变温场的解析解. 从而将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的偏微分方程. 然后,利用特征值问题在数学上的相似性,求得了四边简支条件下功能梯度材料明德林矩形微板的复频率解析解, 进而利用复频率法获得了反映谐振器热弹性阻尼水平的逆品质因子. 最后, 给出了材料性质沿板厚按幂函数变化的陶瓷?金属组分功能梯度矩形微板的热弹性阻尼数值结果. 定量地分析了横向剪切变形、材料梯度变化以及几何参数对热弹性阻尼的影响规律. 结果表明, 采用明德林板理论预测的热弹性阻尼值小于基尔霍夫板理论的预测结果, 而且两者的差别随着相对厚度的增大而变得显著.      

Modified Mindlin plate theory and shear locking-free finite element formulation

The basic equations of the Mindlin theory are specified as starting point for its modification in which total deflection and rotations are split into pure bending deflection and shear deflection with bending angles of rotation, and in-plane shear angles. The equilibrium equations of the former displacement field are split into one partial differential equation for flexural vibrations. In the latter case two differential equations for in-plane shear vibrations are obtained, which are similar to the well-known membrane equations. Rectangular shear locking-free finite element for flexural vibrations is developed. For in-plane shear vibrations ordinary membrane finite elements can be used. Application of the modified Mindlin theory is illustrated in a case of simply supported square plate. Problems are solved analytically and by FEM and the obtained results are compared with the relevant ones available in the literature.     

Exact solutions for axisymmetric flexural free vibrations of inhomogeneous circular Mindlin plates with variable thickness

Circular plates with radially varying thickness, stiffness, and density are widely used for the structural optimization in engineering. The axisymmetric flexural free vibration of such plates, governed by coupled differential equations with variable coefficients by use of the Mindlin plate theory, is very difficult to be studied analytically.In this paper, a novel analytical method is proposed to reduce such governing equations for circular plates to a pair of uncoupled and easily solvable differential equations of the Sturm-Liouville type. There are two important parameters in the reduced equations.One describes the radial variations of the translational inertia and flexural rigidity with the consideration of the effect of Poisson's ratio. The other reflects the comprehensive effect of the rotatory inertia and shear deformation. The Heun-type equations, recently well-known in physics, are introduced here to solve the flexural free vibration of circular plates analytically, and two basic differential formulae for the local Heun-type functions are discovered for the first time, which will be of great value in enriching the theory of Heun-type differential equations.     

求解任意形状厚板自由振动的微分容积法

用一种新型的数值方法－微分容积法求解具有任意形状的厚板自由振动问题。该方法的基本思想是将任意一个线性微分算子对函数的作用值如一个连续函数或其任意阶偏导数、或其线性组合在某点处的值表示为域内各点函数值的线性加权组合，如此可将问题的控制方程和边界条件离散成为一组线性齐次代数方程。这是一典型的特征值问题，其特征值可用子空间迭代法求解。文中给出了详细的计算公式，用一些数值算例说明了该方法求解中厚板自由振动问题的可行性、有效性和通用性，并通过与有关文献比较验证了该方法的数值精度。     

线性变厚度粘弹性矩形板在随从力作用下的动力稳定性

利用粘弹性微分型本构关系和薄板理论,对线性变厚度粘弹性矩形薄板建立了在切向均布随从力作用下的运动微分方程,采用微分求积法研究了在随从力作用下线性变厚度粘弹性矩形薄板的稳定性问题,具体对对边简支对边固支和三边简支一边固支条件下体变为弹性、畸变服从Kelvin-Voigt模型的变厚度粘弹性矩形板在随从力下的广义特征值问题进行了求解,分析了薄板的长宽比、厚度比及材料的无量纲延滞时间的变化对随从力作用下矩形薄板的失稳形式及相应的临界荷载的影响.     

ON THE REFINED FIRST-ORDER SHEAR DEFORMATION PLATE THEORY OF KARMAN TYPE

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｕｓｅｏｆｌａｍｉｎａｔｅｄｃｏｍｐｏｓｉｔｅｓｉｎｔｈｉｎ＿ｗａｌｌｅｄｓｔｒｕｃｔｕｒｅｓｉｎｃｒｅａｓｅｓｓｏｔｈａｔｅｆｆｅｃｔｓｏｆｔｒａｎｓｖｅｒｓｅｓｈｅａｒｄｅｆｏｒｍａｔｉｏｎｓｃａｎｎｏｔｂｅｎｅｇｌｅｃｔｅｄａｎｄｉｎｖｏｋｅｑｕｉｔｅｃｏｍｐｌｅｘｅｓｉｎｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓ.Ｉｔｉｓｗｅｌｌ＿ｋｎｏｗｎｔｈａｔｔｈｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｌａｍｉｎａｔｅｄｐｌａｔｅｓａｎｄｓｈｅｌｌｓｃｏｕｎｔｉｎｇｆｏｒｔｒ…     

基于新修正偶应力理论的Mindlin层合板稳定性分析

基于新的各向异性修正偶应力理论提出一个Mindlin复合材料层合板稳定性模型。该理论包含纤维和基体两个不同的材料长度尺度参数。不同于忽略横向剪切应力的修正偶应力Kirchhoff薄板理论,Mindlin层合板考虑横向剪切变形引入两个转角变量。进一步建立了只含一个材料细观参数的偶应力Mindlin层合板工程理论的稳定性模型。计算了正交铺设简支方板Mindlin层合板的临界载荷。计算结果表明该模型可以用于分析细观尺度层合板稳定性的尺寸效应。     

Computation of the stress resultants of a floating Mindlin plate in response to linear wave forces

In this paper, we focus on the computation of stress resultants of a floating elastic plate using the Mindlin plate theory. The proposed method makes use of the linear wave theory and shallow-draft assumption. However, the usual Kirchhoff theory is replaced by the Mindlin theory for the plate. For a single frequency, the coupled water-plate problem is solved using a higher-order-coupled finite element–boundary element method. The solutions for the stress-resultants computed using the proposed method are more satisfactory than these based on the Kirchhoff plate theory.     

Bending analysis of magnetoelectroelastic nanoplates resting on Pasternak elastic foundation based on nonlocal theory

Based on the nonlocal theory and Mindlin plate theory, the governing equations (i.e., a system of partial differential equations (PDEs) for bending problem) of magnetoelectroelastic (MEE) nanoplates resting on the Pasternak elastic foundation are first derived by the variational principle. The polynomial particular solutions corresponding to the established model are then obtained and further employed as basis functions with the method of particular solutions (MPS) to solve the governing equations numerically. It is confirmed that for the present bending model, the new solution strategy possesses more general applicability and superior flexibility in the selection of collocation points. The effects of different boundary conditions, applied loads, and geometrical shapes on the bending properties of MEE nanoplates are evaluated by using the developed method. Some important conclusions are drawn, which should be helpful for the design and applications of electromagnetic nanoplate structures.     

Finite element analysis of the piezoelectric vibrations of quartz plate resonators with higher-order plate theory

A finite element formulation of the piezoelectric vibrations of quartz resonators based on Mindlin plate theory is derived. The higher-order plate theory is employed for the development of a collection of successively higher-order plate elements which can be effective for a broad frequency range including the fundamental and overtone modes of thickness-shear vibrations. The presence of electrodes is also considered for their mechanical effects.The mechanical displacements and electric potential are combined into a generalized displacement field, and the subsequent derivations are carried out with all the generalized equations. Through the standard finite element procedure, the vibration frequency, the vibration mode shapes and the electric potential distribution are obtained. The frequency spectra are compared with some well-known experimental results with good agreement.Our previous experience with finite element analysis of high-frequency quartz plate vibrations leads us to believe that memory and computing time will always remain as key issues despite the advances in computers. Hence, the use of sparse matrix techniques, efficient eigenvalue solvers, and other reduction procedures are explored.     

Vibration band gap properties of periodic Mindlin plate structure using the spectral element method

In this paper, vibration band gap properties of periodic Mindlin plate structure with two simply supported opposite edges are studied using the spectral element method (SEM). Based on the Mindlin plate theory (MPT), the spectral Mindlin plate stiffness matrix is deduced. The spectral equation of the whole periodic structure is further established. Frequency responses are calculated by the spectral equations to illustrate band gap properties. Compared with the results based on the classic plate theory (CPT), the effects of the shear and rotary inertia on the band gap properties are analyzed. The results are also compared with those calculated by the finite element method (FEM). It can be observed that the SEM is more accurate in high frequency ranges. Furthermore, the influences of the material properties and structure dimension on the band gap behaviors are investigated.     

Free vibrations of a piezoelectric body

We present a systematic analysis of the eigenvalue problem associated with free vibrations of a finite piezoelectric body. The analysis is based on an abstract formulation of the three-dimensional theory of piezoelectricity. A series of fundamental properties of free vibrations of a piezoelectric body are proved concisely. The problem of free vibrations of a piezoelectric plate governed by the two-dimensional plate equations due to Mindlin is treated in a similar manner.Address after September 1, 1994: Department of Mechanical Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180, USA.Address after August 16, 1994: Clifton Garvin Professor, Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA.     

碳纳米管增强型复合材料功能梯度板的自由振动模型与尺度效应

基于一种新的各向异性修正偶应力理论,建立了碳纳米管增强复合材料功能梯度板的自由振动模型。该模型能够描述尺度效应,且仅包含一个尺度参数。基于一阶剪切变形理论和哈密顿原理推演了板的运动微分方程,并以四边简支板为例给出了自振频率的解析解。讨论了板的几何尺寸、碳纳米管体分比含量和分布方式等因素对板的自振频率的影响。结果表明,本文模型所预测的板的自振基频总是高于经典弹性理论的Mindlin板模型的预测结果,两者间的差异在板的几何尺寸接近尺度参数的值时非常明显,且会随着板的几何尺寸的增大而逐渐消失。     

Exact characteristic equations for some of classical boundary conditions of vibrating moderately thick rectangular plates

The dimensionless equations of motion are derived based on the Mindlin plate theory to study the transverse vibration of thick rectangular plates without further usage of any approximate method. The exact closed form characteristic equations are given within the validity of the Mindlin plate theory for plates having two opposite sides simply supported. The six distinct cases considered involve all possible combinations of classical boundary conditions at the other two sides of rectangular plates. Accurate eigenfrequency parameters are presented for a wide range of aspect ratio η and thickness ratio δ for each case. The three dimensional deformed mode shapes together with their associated contour plots obtained from the exact closed form eigenfunctions are also presented. Finally, the effect of boundary conditions, aspect ratios and thickness ratios on the eigenfrequency parameters and vibratory behavior of each distinct cases are studied in detail. It is believed that in the present work, the exact closed form characteristic equations and their associated eigenfunctions, except for the plates with four edges simply supported, for the rest of considered six cases are obtained for the first time.     

On the refined first-order shear deformation plate theory of Kármán type

A new refined first-order shear-deformation plate theory of the Kármán type is presented for engineering applications and a new version of the generalized Kármán large deflection equations with deflection and stress functions as two unknown variables is formulated for nonlinear analysis of shear-deformable plates of composite material and construction, based on the Mindlin/Reissner theory. In this refined plate theory two rotations that are constrained out in the formulation are imposed upon overall displacements of the plates in an implicit role. Linear and nonlinear investigations may be made by the engineering theory to a class of shear-deformation plates such as moderately thick composite plates, orthotropic sandwich plates, densely stiffened plates, and laminated shear-deformable plates. Reduced forms of the generalized Kármán equations are derived consequently, which are found identical to those existe in the literature. Foundation item: the National Natural Science Foundation of China (59675027) Biography: Zhang Jianwu (1954-)     

Mathematical construction of a Reissner–Mindlin plate theory for composite laminates

A Reissner–Mindlin theory for composite laminates without invoking ad hoc kinematic assumptions is constructed using the variational-asymptotic method. Instead of assuming a priori the distribution of three-dimensional displacements in terms of two-dimensional plate displacements as what is usually done in typical plate theories, an exact intrinsic formulation has been achieved by introducing unknown three-dimensional warping functions. Then the variational-asymptotic method is applied to systematically decouple the original three-dimensional problem into a one-dimensional through-the-thickness analysis and a two-dimensional plate analysis. The resulting theory is an equivalent single-layer Reissner–Mindlin theory with an excellent accuracy comparable to that of higher-order, layer-wise theories. The present work is extended from the previous theory developed by the writer and his co-workers with several sizable contributions: (a) six more constants (33 in total) are introduced to allow maximum freedom to transform the asymptotically correct energy into a Reissner–Mindlin model; (b) the semi-definite programming technique is used to seek the optimum Reissner–Mindlin model. Furthermore, it is proved the first time that the recovered three-dimensional quantities exactly satisfy the continuity conditions on the interface between different layers and traction boundary conditions on the bottom and top surfaces. It is also shown that two of the equilibrium equations of three-dimensional elasticity can be satisfied asymptotically, and the third one can be satisfied approximately so that the difference between the Reissner–Mindlin model and the second-order asymptotical model can be minimized. Numerical examples are presented to compare with the exact solution as well as the classical lamination theory and the first-order shear-deformation theory, demonstrating that the present theory has an excellent agreement with the exact solution.     

A Bending-Gradient model for thick plates. Part I: Theory

This is the first part of a two-part paper dedicated to a new plate theory for out-of-plane loaded thick plates where the static unknowns are those of the Kirchhoff–Love theory (3 in-plane stresses and 3 bending moments), to which six components are added representing the gradient of the bending moment. The new theory, called the Bending-Gradient plate theory is described in the present paper. It is an extension to arbitrarily layered plates of the Reissner–Mindlin plate theory which appears as a special case of the Bending-Gradient plate theory when the plate is homogeneous. However, we demonstrate also that, in the general case, the Bending-Gradient model cannot be reduced to a Reissner–Mindlin model. In part two (Lebée and Sab, 2011), the Bending-Gradient theory is applied to multilayered plates and its predictions are compared to those of the Reissner–Mindlin theory and to full 3D Pagano’s exact solutions. The main conclusion of the second part is that the Bending-Gradient gives good predictions of both deflection and shear stress distributions in any material configuration. Moreover, under some symmetry conditions, the Bending-Gradient model coincides with the second-order approximation of the exact solution as the slenderness ratio L/h goes to infinity.