Kinetics of the Reductions of (Ethylenediaminetetraacetato)cobaltate(III) by 4,4-Dipyridylamine Complexes of Pentacyanoferrate(II) and Pentaammineruthenium(II)

The reactions of Fe(CN)₅dpa^3? and Ru(NH₃)₅dpa²⁺ (dpa = 4,4′-dipyridylamine) with Co(edta)^? have been investigated kinetically. For Fe(CN)₅dpa^3? complex, a linear relationship was observed between the pseudo-First-order rate constants and the concentrations of Co(edta) which leads to a specific rate 0.876 ± 0.006 M^?1S^?1 at T = 25°C., μ = 0.10 M and pH = 8.0. For the Ru(NH₃)₅dpa²⁺ system, the plots k_obs vs [Co(edta)^?] become nonlinear at concentrations of Co(edta) greater than 0.01 M and the reaction is interpreted on the basis of a mechanism involving the formation of an ion pair between Ru(NH₃)₅dpa²⁺ and Co(edta)^? followed by electron transfer from Ru(II) to Co(III). The nonlinear least squares fit of the kinetic results shows that Q_ip = 10.6 ± 0.7 M^?1 and k_et = 93.9 ± 0.7 s^?1 at pH = 8.0,μ = 0.10 M and T = 25°C.     

Salt effects upon reactions of different charge type reactants: Peroxodisulphate Oxidations of Fe(CN)4(bpy)2−, cis-Fe(CN)2(bpy)2 and Fe(bpy)32+ and Iron(II) Oxidation by Co(NH3)5Cl2+

Salt effects on the oxidation of the iron(II) complexes Fe(CN)₄(bpy)^2?, cis-(CN)₂(bpy)₂ and Fe(bpy)₃²⁺ by S₂O₈^2? as well as on the reaction Fe²⁺ + Co(NH₃)₅Cl²⁺ have been studied in concentrated electrolyte solutions at 298.2 K. We have gone from anion–anion to cation–cation reaction with the intermediate cases of anion–neutral and cation–anion reactions. Results show that the main cause of the kinetic salt effects observed is the interaction between supporting electrolytes and the solvent. © 1994 John Wiley & Sons, Inc.     

Highly Sensitive and Selective Detection of Pb(II) by NH2−SiO2/Ru(bpy)32+−UiO66 based Solid‐state ECL Sensor

In this study, a novel electrochemiluminescence (ECL) sensor for highly sensitive and selective detection of Pb(II) was developed based on Ru(bpy)₃²⁺ encapsulated UiO66 metal‐organic‐framework (Ru(bpy)₃²⁺?UiO66 MOF) and ?NH₂ group functionalized silica (NH₂?SiO₂). The NH₂?SiO₂ with large surface area provided an excellent platform for the ECL sensor. As numerous exposed carboxyl groups were present on UiO66 backbone, the Ru(bpy)₃²⁺?UiO66 could be steadily immobilized to NH₂?SiO₂ by forming amide bonds. Meanwhile, the introduced UiO66 MOF which used for the encapsulation of Ru(bpy)₃²⁺, significantly enhanced the ECL efficiency of the proposed sensor, as it possessed a large specific surface area and porosity for the loading of Ru(bpy)₃²⁺. Moreover, a high quenching effect on ECL intensity was obtained in the presence of Pb(II) in the electrolyte. Under the optimal conditions, the quenched ECL intensity showed a good linear relationship within Pb(II) concentration in the range from 1.0×10^?6 to 1.0×10² μM, with a detection limit of 1.0×10^?7 μM (S/N=3). The proposed sensor for Pb(II) detection was simple in operation, rapid in testing, stable in signal, and showed a good anti‐interference ability to some other metal ions. Besides, its application for detecting Pb(II) in a real sample was also investigated here. This work provides a potential platform for metal ions detection in environmental monitoring field.     

Preparation and photoluminescence characteristics of polysiloxane pendant tris(2,2′-bipyridine)ruthenium (II) complex

Polysiloxanes containing pendant tris(2,2′-bipyridine)ruthenium(II) complex (Ru(bpy)3²⁺) were prepared by reaction of polysiloxane-pendant 2,2′-bipyridine (PSiO-bpy) with cis-Ru(bpy)₂Cl₂. In methanol solution, the polymer pendant Ru(bpy)3²⁺ showed absorption maximum at 456nm and emission maximum at around 609nm, both of which are shifted to longer wavelength than the monomeric Ru(bpy)₃²⁺. The lifetime τ₀ of the excited polymer complex with low Ru(bpy)3²⁺ content was almost the same as that of the monomeric one in methanol (830ns), but τ₀ of the polymer with higher complex content was shorter because of a concentration quenching. In a solid state, τ₀ was much shorter (306–503ns) than that in a methanol solution contrary to the conventional polymeric system. Higher complex content in the polymer film caused higher glass transition temperature (Tg), but shorter τ₀. These results indicate concentration quenching in the polymer film. The excited polymer pendant Ru(bpy)3²⁺ was quenched by oxygen, and the relative emission intensity followed the Stern-Volmer equation. In a methanol solution the quenching rate constant (k_q) was the same order of magnitude as the monomeric complex, and independent of the complex content in the polymer. In a film, k_q was higher for the polymer with higher complex content.     

Diffusion and Reactivity of Ruthenium (II) Tris(bipyridine) and Cobalt (II) Tris(bipyridine) in Organically Modified Silicates

The diffusivity and reactivity of Ru(bpy)²⁺ ₃ and Co(bpy)²⁺ ₃ trapped within organically modified silicate (ORMOSIL) monoliths have been studied using electrogenerated chemiluminescence, voltammetry, and amperometry. For gel-encapsulated Ru(bpy)²⁺ ₃-tripropylamine, the shape and intensity of the luminescence-voltage curve was highly dependent on the amount of organoalkoxysilane introduced into the matrix. Likewise, for gel-encapsulated Co(bpy)²⁺ ₃, the magnitude of the diffusion coefficient and its rate of change with drying was also dependent on the organic modifier in the gel. A comparison of the results to those obtained with the gels prepared solely from tetramethoxysilane revealed enhanced diffusivity and reactivity of the reagents encapsulated in the ORMOSIL matrix.     

Decay of Ru(BPY)3 3+ in thin nafion layers catalyzed by Co(II)

Catalytic oxidation of water by Ru(bpy)₃ ³⁺ in the presence of Co²⁺ ions, well known in homogeneous solution, has been investigated in thin Nafion layers. Nafion layers on ITO electrodes were equilibrated with Ru(bpy)₃ ²⁺. Ru(bpy)₃ ³⁺ was produced by electrochemical oxidation after which the electrode was transferred into the reaction cell containing buffered Co²⁺ solution. The build up of Ru(bpy)₃ ²⁺ absorbance at 454 nm was followed spectrophotometrically. The reaction rate is proportional to [Ru(III)], [Co²⁺] and [HPO₄ ^2-]. We found no evidence for a pH effect in the range 6–8, and no inhibition by Ru(II). A limiting rate of formation of Ru(II) is observed at high Co²⁺ or phosphate ion concentrations. At high local concentration of the Ru complex in the Nafion layer (~ 0.5 M), two Ru(II) formation processes are observed, their rates differ by one order, but other features (effects of [Ru(III)], [Ru(II)], [Co²⁺], phosphate and pH) remain unchanged. These results are in contrast with homogeneous solution where the rate of build up of Ru(II) has been previously reported to be proportional to [Ru(III)], [Co²⁺] and [OH^-]², and inversely proportional to [Ru(II)]. A mechanism is proposed which accounts for these observations.     

Chemistry of Ruthenium Polypyridine Complexes: IX. Nitro-Nitrosyl Equilibrium in cis-[Ru(2,2'-bpy)2(L)NO2]+ Complexes

Ruthenium(II) bisbipyridyl complexes cis-[Ru(bpy)₂(L)NO₂](BF₄) (bpy is 2,2'-bipyridyl) with 4-substituted pyridine ligands L = 4-(Y)py (Y = NH₂, Me, Ph, and CN) were obtained. The equilibrium constants of the reversible nitro-nitrosyl transition [Ru(bpy)₂(L)NO₂]⁺ + 2H⁺ [Ru(bpy)₂(L)NO]^{3 +} + H₂O were measured in solutions with pH 1.5-8.5 (ionic strength 0.4). The constants correlate with the protonation constants of free ligands 4-(Y)py.     

Polyelectrolyte-based electrochemiluminescence enhancement for Ru(bpy)3 loaded by SiO2 nanoparticle carrier and its high sensitive immunoassay

In this paper the strong electrochemiluminescence (ECL) nanoparticles have been prepared based on the anionic polyelectrolyte sodium polyacrylate (PAA)-ECL enhancement for Ru(bpy)₃²⁺, which were loaded by the carrier of SiO₂ nanoparticle. There were two kinds of Ru(bpy)₃²⁺ for the as-prepared nanoparticles, the doped one and the exchanged one. The former was loaded inside the ECL nanoparticles by doping, in a form of ion-pair macromolecules PAA–Ru(bpy)₃²⁺. The corresponding ECL was enhanced about 2 times owing to the doping increase of Ru(bpy)₃²⁺. The latter was loaded on the PAA-doped Nafion membrane by ion exchange. The corresponding ECL was enhanced about 3 times owing to the ion-exchanging increase of Ru(bpy)₃²⁺. At the same time, ECL intensity of the doped-inside Ru(bpy)₃²⁺ was further enhanced 13 times because polyelectrolyte PAA in the doped membrane could obviously enhance electron transfer between the doped Ru(bpy)₃²⁺ and the working electrode. Furthermore, based on hydrophobic regions of the doped membrane antibody labeling could be easily realized by the as-prepared nanoparticles and then a high sensitive ECL immunoassay for HBsAg was developed. The linear range was between 1.0 and 100 pg mL⁻¹ (R² = 0.9912). The detection limit could be as low as 0.11 pg mL⁻¹ (signal-to-noise ratio = 3).     

Effects of Divalent Metal Ions on Electrochemiluminescence Sensor with Ru(bpy)32+ Immobilized in Eastman‐AQ Membrane

Different effects of divalent metal ions on electrochemiluminescence (ECL) sensor with Ru(bpy)₃²⁺ immobilized in Eastman‐AQ membrane were investigated. Mg²⁺, Ca²⁺ and Fe²⁺ can elevate the ECL of Ru(bpy)₃²⁺/proline; while metal ions that underwent redox reactions on the electrode such as Mn²⁺ and Co²⁺ presented intensive quenching effects on Ru(bpy)₃²⁺ ECL. Also, the quenching effect of Mn²⁺ on the ECL sensor with Ru(bpy)₃²⁺ immobilized in Eastman‐AQ membrane enhanced to about 30‐folds compared with the case that Ru(bpy)₃²⁺ was dissolved in phosphate buffer, and the enhanced quenching effects of Mn²⁺ were studied.     

Efficiency of polymer sensitizer in photosensitized reaction of tris(bipyridine)ruthenium(II) complex-containing polymer

Photochemical properties of Ru(bpy)₂(poly-4-methyl-4′-vinyl-2,2′-bipyridine)Cl₂ ( 2 ) were studied and compared with that of Ru(bpy)₃Cl₂. Continuous irradiation of a solution, which contains polymer 2 as a photosensitizer, methylviologen (MV²⁺) or 4,4′-bipyridinium-1,1′-bis(trimethylenesulfonate) (SPV) as an electron acceptor and triethanolamine (TEOA) as a sacrificial donor, resulted in the formation of viologen radical ion (MV⁺ or SPV^?). The rate of formation of MV⁺ or SPV^? for the polymer 2 system was smaller than that for the Ru(bpy)₃ Cl₂ systems. The reason for this fact was kinetically analyzed by quenching experiments of excited Ru(II) complexes by MV²⁺ or SPV, the photosensitized reactions of the TEOA–Ru(II) complex–MV²⁺ or -SPV systems, and the dye laser photolysis of the Ru(II) complex–MV²⁺ or -SPV systems.     

Electron transfer. 123. Competitive redox reactions involving a Cobalt(I) intermediate

he hypophosphito derivative of Co^III, (NH₃)₅CoO₂PH₂ ²⁺, decomposes in basic media, yielding Co(II) quantitatively, along with a 1:1 mixture of hypophosphite and phosphite. Earlier studies point to a cobalt (I) intermediate, which rapidly reduces a second molecule of Co(III) reactant to Co(II). In the presence of an external cobalt (III) oxidant (Co³X), the latter competes with the hypophosphito complex for Co(I), lowering the yield of free hypophosphite. From the ratio of phosphorus products (P³/P¹), evaluated by proton decoupled ³¹P NMR, the relative reactivities (k_t/k_c) of the external Co(III) “traps” and the hypophosphito complex may be determined. A log-log plot comparing values of k_t/k_c with rates for reductions of the same series of Co(III) oxidants with Ru(NH₃)₆ ²⁺ (k_Ru values) is badly scattered with a slope of only 0.23, well below the value of unity stipulated by the Marcus model, indicating that an outer-sphere mechanism cannot operate for all of the Co(III)-Co(I) reactions and may not operate for any, except for that with Co(NH₃)₅(py)₃₊. Among the carboxylato-substituted oxidants, there are no rate enhancements by neighbouring pyridine, -SR,-OH, -CHO, or -SO₃H functions, in contrast to the accelerations previously observed for reductions by Cr(II), Eu(II) and Ti(III), which are attributed to intermediacy of chelate-stabilized precursor complexes. It is suggested that the Co(III)-Co(I) reactions, which determine the ratio of phosphorus products, are much more rapid than the ligand substitution at the Co(I) center which must precede chelate formation, and that the latter therefore does not intervene significantly in the redox processes.     

Studies on outer sphere electron transfer reactions of some surfactant-cobalt(III) complexes with ferrocyanide anion

The kinetics and mechanism of reduction of the surfactant-cobalt(III) complex ions, cis-[Co(bpy)₂(C₁₂H₂₅NH₂)₂]³⁺ and cis-[Co(phen)₂(C₁₂H₂₅NH₂)₂]³⁺ (bpy = bipyridyl, phen = 1,10-phenan-throline, C₁₂H₂₅NH₂ = dodecylamine) by Fe(CN₆)⁴⁻ in self-micelles were studied at different temperatures. Experimentally the reaction was found to be second order and the electron transfer postulated as outersphere. The rate constant for the electron transfer reaction for both the complexes was found to increase with increase in the initial concentration of the surfactant-cobalt(III) complex. This peculiar behaviour of dependence of second-order rate constant on the initial concentration of one of the reactants has been attributed to the presence of various concentration of micelles under different initial concentration of the surfactantcobalt(III) complexes in the reaction medium. The effect of inclusion of the long aliphatic chain of the surfactant complex ions into β-cyclodextrin on these reactions has also been studied.     

Facile design of poly(3,4-ethylenedioxythiophene)-tris(2,2′-bipyridine)ruthenium (II) composite film suitable for a three-dimensional light-harvesting system

It has been confirmed that octasulfonatocalix[8]arene (Calx-S8) and tris(2,2′-bipyridine)ruthenium (II) (Ru(bpy)₃²⁺) can form a stable host-guest complex in aqueous solution. The binding constant for 1:1 [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ complex formation was estimated to be (2.4±0.8)×10⁴ dm³ mol⁻¹ by fluorescence titration, which indicates that the [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ complex is the main species in 1:1 molar ratio aqueous solution of Calx-S8 and Ru(bpy)₃²⁺. In situ UV-Vis spectroscopic measurements indicated that Ru(bpy)₃²⁺ complexes can be readily deposited onto ITO electrode through electrochemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using [Calx-S8⁸⁻·Ru(bpy)₃²⁺]⁶⁻ host-guest complex as a dopant anion owing to the electrostatic interaction between the cationic conductive polymer and the anionic host-guest complex. The loading degree of the composite film with Ru(bpy)₃²⁺ can be determined by Lambert-Beer law modified for the two-dimensional concentration. The obtained composite film showed good photoelectric conversion properties in response to visible light irradiation. This is a novel photocurrent generation system in which the photoexcited state energy is efficiently collected by the conductive polymeric layer.     

Photoreactions of tris(2,2'-bipyridyl)-ruthenium(II) with peroxydisulfate in deoxygenated aqueous solution in the presence of nucleic acid components, polynucleotides, and DNA

Abstract— The photobleaching of excited tris(2,2′-bipyridyl)-ruthenium(II), *Ru(bpy)₃²⁺, by peroxydis-ulfate in the presence of DNA and a series of polynucleotides, mononucleosides (uridine, cytidine, adenosine, guanosine), and purine or pyrimidine bases was studied in deoxygenated aqueous solution at room temperature. A reaction scheme is proposed which is confirmed by data obtained from mixing experiments with Ru(III) and bleaching measurements of Ru(II) using either continuous visible light or a nanosecond laser pulse (353 nm). The primary photobleaching step is the formation of Ru(bpy)₃²⁺ and the SO₄^- radical anion. In the presence of nucleic acids the two oxidizing species are formed in close proximity to the strand, since we used conditions where the Ru(bpy) ₃²⁺ ion is bound to the strand. Concerning the secondary reactions two clear cases (and several more complex cases) can be distinguished. On addition of uracil to the Ru(bpy)₃²⁺/S₂O₈^2- system the quantum yield for photobleaching is not significantly changed (φ^rel? 0.95), whereas it drops to virtually zero for guanosine-containing substrates, including DNA. The former result is explained by a reaction of SO₄^- with uracil leading to theN–1 radical which oxidizes Ru(II) to Ru(IIl). In contrast, the guanine moiety reacts with Ru(III) converting it into Ru(II). Therefore, in the presence of S₂O₈^2- and a substrate carrying a guanine moiety, Ru(bpy₃²⁺ acts as a photocatalyst.     

Outer-sphere electron-transfer reactions of co(III)–polymer complexes in relation to its polymer effects

The outer-sphere electron-transfer reactions between [Co(III)(NH₃)₅L] (CIO₄)₃ [L = polyethyleneimine (PEI), L = NH₃(Amm)] or cis-[Co(III)(en)₂L′Cl]Cl₂ [L′ = poly-N-vinyl-2-methylimidazole(PVI), poly-4-vinylpyridine (PVP), N-ethylimidazole (NEI), pyridine (Py)] and various Fe(II) were studied. In the reaction with Fe(II)-(phen)₃²⁺, the reactivity of Co(III)–PEI was smaller than that of Co(III)–Amm due to the larger electrostatic repulsion. On the other hand, the reactivity of Co(III)–PEI was larger by a factor of 80 in the reaction with Fe(II)(H₂O)₆²⁺. From the results of rapid-scanning spectroscopy, the higher reactivity of Co(III)–PEI is caused by the coordination of free ethyleneimine residues in the Co(III)–PEI to Fe(II)–ion. Further more, the hydrophobic interaction between heteroaromatic polymer ligands and Fe(II)-(phen)₃²⁺ brought about the higher reactivities of Co(III)–PVI and Co(III)–PVP. Three interactions caused by the essential properties of polymers are discussed in relation to conformational changes.     

Chemiluminescence of Ru(bpy)3 2+* in the reaction of electron transfer from Ph3CNa to Ru(bpy)3 3+ in a solution

Conditions for the generation of the Ru(bpy)₃ ³⁺ complex in organic solvents (Me₃CN or MeNO₂) in the presence of small amounts of H₂SO₄ were found. Chemiluminescence was observed in the reaction of Ru(bpy)₃ ³⁺ with Ph₃Na in a THF-MeCN mixture. The chemiluminescence emitter was identified as Ru(bpy)₃ ^2+*. This emitter forms in the excited state in the elementary reaction of electron transfer from the Ph₃C⁻ anion to Ru(bpy)₃ ³⁺. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 292–294, February, 1999.     

Effects of Heteropoly Acids and Surfactant on Electrochemiluminescence of Tris(2,2'-Bipyridine) Ruthenium(II)

ABSTRACT

The effects of heteropoly acids and Triton X-100 on electrochemiluminescence (ECL) of Ru(bpy)₃ ²⁺ are investigated. Triton X-100 prevents the oxidation of oxalate and results in an increase of the ECL signal. H₅SiW₁₁VO₄₀ prevents the direct oxidation of oxalate and makes the electrochemical behavior of Ru(bpy)₃ ²⁺ less reversible, which leads to a decrease of the ECL signal. In contrast, H₃PMo₁₂O₄₀ has negligible effect on ECL intensity. Some possible reasons for the effects on the ECL of Ru(bpy)₃ ²⁺ are discussed based on the adsorption of SiW₁₁VO₄₀ ^5? on electrode surface and the ion association between SiW₁₁VO₄₀ ^5? and Ru(bpy)₃ ²⁺. The signal of ECL decreases linearly with the concentration of heteropoly acid in the range from 2x10^?6 to 1x10^?4 mol 1^?1. The results indicate that ECL of Ru(bpy)₃ ²⁺ is a potential sensitive and selective detection method for heteropoly acids and hence for the elements comprised in them.     

Spectrocyclic Voltammetry of Ruthenium Purple Electrodeposited on a WO3/Tris(2,2′-bipyridine)-ruthenium(II)/Polymer Hybrid Film

Summary: Electrochemical reactions of Ruthenium purple, Feequation/tex2gif-stack-1.gif[Ru^II(CN)₆]₃ (RP; Fe^III-Ru^II) were studied using a spectrocyclic voltammetry (SCV) technique. The SCV measurement for an RP film coated on an ITO electrode showed a reversible redox between RP and Ruthenium white (RW; Fe^II-Ru^II) at 0.14 V vs saturated calomel reference electrode (SCE). An RP film was electrodeposited on a hybrid film of tungsten trioxide (WO₃)/tris(2,2′-bipyridine)ruthenium(II) ([Ru(bpy)₃]²⁺; bpy = 2,2′-bipyridine)/poly(sodium 4-styrenesulfonate) (PSS) (denoted as WRP film) from a colloidal solution containing 0.5 mM FeCl₃, 0.5 mM K₄[Ru(CN)₆] and 40 mM KCl using a potentiodynamic multi-sweep technique. In a cyclic voltammogram (CV) of a WRP/RP film, a redox response was observed at 0.61 V in addition to essential redox responses of WRP hybrid film (a [Ru(bpy)₃]²⁺/[Ru(bpy)₃]³⁺ redox at 1.03 V and a H_xWO₃/WO₃ redox below 0.09 V), but a redox response of RW/RP was not observed at 0.14 V. The SCV measurement for the WRP/RP film suggested that the redox response at 0.61 V is attributed to a redox of [Ru(bpy)₃]²⁺/[Ru(bpy)₃]³⁺ interacted electrostatically with RP. It also showed that RW is oxidized to RP via [Ru(bpy)₃]²⁺/[Ru(bpy)₃]³⁺ redox and RP is reversibly reduced to RW via H_xWO₃/WO₃ redox. This unique geared electrochemical reaction for the WRP/RP film leads to a hysteresis property of an RW/RP redox.     

Spectral Properties of Ruthenium(II) Mixed-Ligands Complexes with 2,2'-Bipyridyl and Phosphines

Spectral-kinetic luminescence characteristics of the complexes cis-[Ru(bpy)(dppe)X2], cis- [Ru(bpy)2(PPh₃)X](BF₄) and cis-[Ru(bpy)₂X₂] [bpy = 2,2'-bipyridyl, dppe = 1,2-bis(diphenylphosphino)ethane, PPh₃ is triphenylphosphine, X = NO₂ ^- and CN^-] in the ethanol-methanol 4:1 mixtures and adsorbed on the oxide SiO₂ or porous polyacrylonitrile polymer surface were studied. Luminescence and luminescence exitation spectra were registered at 77 and 293 K in 230-750 nm range and the luminescence decay time was measured. Introduction of phosphine ligands to the ruthenium(II) bipyridyl complexes inner sphere leads to rise in singlet and triplet state energy at the charge transfer from Ru(II) to 2,2'-bipyridyl in the series [Ru(bpy)₂X₂] < Ru(bpy)₂(PPh₃)X](BF₄) < [Ru(bpy)(dppe)X₂]. The complex adsorption on SiO₂ or polyacrylonitrile surface affects noticeably the luminescence spectro-kinetic characteristics.