Preparation of polysulfone‐g‐poly(N‐isopropylacrylamide) graft copolymers through atom transfer radical polymerization and formation of temperature‐responsive nanoparticles

Polysulfone‐g‐poly(N‐isopropylacrylamide) (PSf‐g‐PNIPAAm) graft copolymers were prepared from atom transfer radical polymerization of NIPAAm using chloromethylated PSf as a macro‐initiator. The chain lengths of PNIPAAm of the graft copolymers were controllable with polymerization reaction time. The chemical structures of the graft copolymers were characterized with FTIR, NMR, and elemental analysis and their amphiphilic characteristics were examined and discussed. The PSf‐g‐PNIPAAm graft copolymers and the nanoparticles made from the graft copolymers exhibited repeatable temperature‐responsive properties in heating–cooling cycles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4756–4765, 2008     

Glass transition temperatures of ABA poly(styrene-b-isoprene) block copolymers by differential scanning calorimetry

The glass transition behavior of two sets of ABA poly(styrene-b-isoprene) block copolymers was examined by differential scanning calorimetry. In one series, the triblock copolymers had different total molecular weights and the same (30 wt %) polyisoprene content, in the other, the molecular weight was constant (30,000 g/mol) and the elastomer content was the variable. For all triblock copolymers studied, the data show an inward shift for the glass transition temperatures T_g of the corresponding homopolymers. This shift increases for the rigid-phase T_g as the polystyrene block length decreases. Depending on their molecular characteristics, two, three, or only one T_g were found. The third T_g was interpreted in terms of the existence of an interphase. Some of these conclusions could be confirmed by transmission electron microscopy.     

“Living” free radical copolymerization of styrene and N-vinylcarbazole

Poly[styrene-co-(N-vinylcarbazole)] copolymers with controlled molecular weights and narrow polydispersities were synthesized by nitroxide-mediated “living” free radical copolymerization using an initiator/capping agent system consisting of benzoyl peroxide (BPO) and the stable nitroxyl radical 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO). The copolymerization behaves in a “living” fashion and allows the synthesis of poly[styrene-co-(N-vinylcarbazole)]/polystyrene block copolymers via a controlled chain-extension reaction of the prepared copolymers with styrene.     

Selective hydrolysis of oxazoline block copolymers

Block copolymers, composed of a hydrophobic block [poly(N-t-butylbenzoyl ethylenimine) or poly(N-lauroyl ethylenimine)] and a hydrophilic block [poly(N-propionyl ethylenimine)], synthesized by cationic ring-opening polymerization of 2-substituted Δ2-oxazolines, were selectively deacylated by acid hydrolysis. The hydrolysis process was monitored by using ¹H-NMR. The results show that the propionyl groups could be removed from the hydrophilic block of the polymer chain without touching the hydrophobic block, if appropriate reaction conditions were used.     

Synthesis and characterization of well‐defined diblock and triblock copolymers of poly(N‐isopropylacrylamide) and poly(ethylene oxide)

Well‐defined diblock and triblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(ethylene oxide) (PEO) were successfully synthesized through the reversible addition–fragmentation chain transfer polymerization of N‐isopropylacrylamide (NIPAM) with PEO capped with one or two dithiobenzoyl groups as a macrotransfer agent. ¹H NMR, Fourier transform infrared, and gel permeation chromatography instruments were used to characterize the block copolymers obtained. The results showed that the diblock and triblock copolymers had well‐defined structures and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.2), and the molecular weight of the PNIPAM block in the diblock and triblock copolymers could be controlled by the initial molar ratio of NIPAM to dithiobenzoate‐terminated PEO and the NIPAM conversion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4873–4881, 2004     

Synthesis and characterization of biodegradable triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] by atom transfer radical polymerization

Biodegradable poly(tert‐butyl acrylate)–poly[(R)‐3‐hydroxybutyrate]–poly (tert‐butyl acrylate) triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] (PHB) were synthesized by atom transfer radical polymerization. The chain architectures of the triblock copolymers were confirmed by ¹H NMR and ¹³C NMR spectra. Gel permeation chromatography analysis was used to estimate the molecular weight characteristics and lengths of the PHB and poly(tert‐butyl acrylate) blocks of the copolymers. The thermal properties of the copolymers were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA showed that the triblock copolymers underwent stepwise thermal degradation and had better thermal stability than their respective homopolymers, whereas DSC analyses showed that a microphase‐separation structure was formed only in the triblock copolymers with the longer PHB block. As a similar result, from wide‐angle X‐ray diffraction experimentation, the crystalline phase of PHB could not be seen evidently in the triblock copolymers with the shorter PHB block. The enzymatic hydrolysis of the copolymer films was carried at 37 °C and pH 7.4 in a potassium phosphate buffer with an extracellular PHB depolymerase from Penicillum sp. The biodegradability of the triblock copolymers increased with an increase in the PHB block content. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4857–4869, 2005     

ABA-type amphiphilic triblock copolymers containing p-ethoxy azobenzene via atom transfer radical polymerization: Synthesis,characterization, and properties

ABA-type amphiphilic triblock copolymers composed of poly(ethylene glycol)s (PEGs) with different number-average molecular weights as the hydrophilic blocks (B) and poly{6-[4-(4-ethoxyphenylazo)phenoxy]hexyl methacrylate} (PA6C) as the hydrophobic blocks (A) were prepared via atom transfer radical polymerization. These copolymers were prepared from bromo-terminated macroinitiators based on PEG6000, PEG2000, and PEG600, with CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine as the catalytic system, at 85 °C in anisole. The block copolymers were characterized with ¹H NMR spectroscopy and gel permeation chromatography. Differential scanning calorimetry measurements were performed to reveal the phase segregation. In contrast to those polymers with similar compositions and structures in previous reports, these amphiphilic copolymers exhibited unusual liquid-crystalline properties over a wide temperature range, being stable even at room temperature. These copolymers showed photoresponsive isomerization under the irradiation of UV–vis light both in THF solutions and in solid films. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2225–2234, 2007     

Nylon 6–polyisobutylene sequential copolymers. II. Synthesis,characterization, and morphology of di-, tri-, and radial block copolymers

Nylon 6–PIB diblock, triblock, and tristar radial block copolymers have been synthesized from telechelic hydroxyl-terminated polyisobutylene, PIB(OH)_n (n = 1,2,3), by conversion of this prepolymer with hexamethylene diisocyanate (HMDI), toluene diisocyanate (TDI), N-chlorocarbonyl diisocyanate (NCCI), and oxalyl chloride (OxCl) and using the resulting materials as macroactivators for anionic caprolactam polymerization. Prepolymers with molecular weights from 6000 to 38,000 have been employed. Derivatization with NCCI and subsequent anionic caprolactam polymerization gave highest yields and blocking efficiencies. The block copolymers have been characterized by molecular weight and composition. In addition to the expected T_g and T_m characteristics of long PIB and nylon 6 segments, DSC studies showed an intermediate glass transition at ca. ?20°C. Transmission electron microscopy of di-, tri-, and radial blocks show increasing segregation and orientation of rubbery/crystalline domains. Tensile strengths and elongations of the block copolymers range from 16.5 to 41 MPa and 15 to 30%, respectively, and stress-strain diagrams show the effect of block architecture on these properties.     

Synthesis,characterization, and solution behavior of well-defined double hydrophilic linear amphiphilic poly (N-isopropylacrylamide)-b-poly (ε-caprolactone)-b-poly (N-isopropylacrylamide) triblock copolymers

Well-defined linear dihydrophilic amphiphilic ABA-type triblock copolymers of ε-caprolactone (CL) and N-isopropylacrylamide (NIPAAm) have successfully been synthesized with a high yield by combining the ring opening polymerization (ROP) and xanthate-mediated reversible addition-fragmentation chain transfer (RAFT) polymerization methods. The resulted block copolymer shows the formation of micelles in water as supported by light scattering. The critical micelle concentration (cmc) value of the micelle increases with the increase in the chain length of the poly (N-isopropylacrylamide) (PNIPAAm) block. Cloud point of the block copolymers decreases with the decrease in the PNIPAAm chain length. The TGA analysis shows a one-step degradation and a lower thermal stability of the triblock copolymer than the PNIPAAm. The DSC analysis of the triblock copolymer shows the lowering of glass transition temperature (T _g), and melting temperature (T _m) peaks possibly due to the partial miscibility of the poly (ε-caprolactone) (PCL) block with the amorphous PNIPAAm block through the interaction of ester groups of PCL with the amide groups of PNIPAAm. The XRD pattern of the triblock copolymer shows a broad peak due to the suppression of the crystallization of PCL block owing to the mixing of PNIPAAm block with the PCL block.     

Synthesis of urea‐containing ABA triblock copolymers: Influence of pendant hydrogen bonding on morphology and thermomechanical properties

Reversible addition‐fragmentation chain transfer (RAFT) polymerization produced novel ABA triblock copolymers with associative urea sites within pendant groups in the external hard blocks. The ABA triblock copolymers served as models to study the influence of pendant hydrogen bonding on polymer physical properties and morphology. The triblock copolymers consisted of a soft central block of poly(di(ethylene glycol) methyl ether methacrylate) (polyDEGMEMA, 58 kg/mol) and hard copolymer external blocks of poly(2‐(3‐hexylureido)ethyl methacrylate‐co‐2‐(3‐phenylureido)ethyl methacrylate) (polyUrMA, 18‐116 kg/mol). Copolymerization of 2‐(3‐hexylureido)ethyl methacrylate (HUrMA) and 2‐(3‐phenylureido)ethyl methacrylate (PhUrMA) imparted tunable hard block T_g's from 69 to 134 °C. Tunable hard block T_g's afforded versatile thermomechanical properties for diverse applications. Dynamic mechanical analysis (DMA) of the triblock copolymers exhibited high modulus plateau regions (∼100 MPa) over a wide temperature range (−10 to 90 °C), which was indicative of microphase separation. Atomic force microscopy (AFM) confirmed surface microphase separation with various morphologies. Variable temperature FTIR (VT‐FTIR) revealed the presence of both monodentate and bidentate hydrogen bonding, and pendant hydrogen bonding remained as an ordered structure to higher than expected temperatures. This study presents a fundamental understanding of the influence of hydrogen bonding on polymer physical properties and reveals the response of pendant urea hydrogen bonding as a function of temperature as compared to main chain polyureas. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1844–1852     

Controlling the thermomechanical properties of biobased ABA triblock copolymers comprising polylactide (A) and poly(1,2-propylene succinate) (B) with high molecular weight

Bis-hydroxyl-terminated poly(1,2-propylene succinate) (PPS-diols) with high molecular weight (10–40 kDa) are prepared by two-step melt polycondensation of succinic acid and 1,2-propanediol with Ti(BuO)₄ as the catalyst. By using these PPS-diols as macroinitiators, the ring-opening polymerization of d - and l -lactides is readily conducted to obtain enantiomeric ABA triblock copolymers consisting of poly(l -lactide) and PPS (B) (t-l -PPS) as well as those of poly(d -lactide) and PPS (B) (t-d -PPS) which have higher PPS compositions (20–70 wt%) in addition to high molecular weight (20–80 kD). The T_g, T_m, and ΔH_m values of the t-l -PPS copolymers as well as the stereo mixtures of t-l -PPS/t-d -PPS are controlled to linearly decrease with increasing the PPS content. The copolymers also exhibit higher elastomeric properties with increasing the PPS content. The tensile properties of the copolymer films having higher PPS contents (both the single block copolymers and stereo mixtures) are comparable to those of the oil-based thermoplastic elastomers. It is therefore concluded that these block copolymers can afford thermoplastic elastomers or flexible plastic materials having a 100% biobased content.     

三嵌段共聚物PS-PHB-PS的原子转移自由基聚合

为了克服聚β-羟基丁酸酯(PHB)的弱点, 得到性能良好的新材料, 本文利用原子转移自由基聚合方法, 以Br-PHB-Br为大分子引发剂, 苯乙烯为单体, 在CuBr/N,N,N′,N″,N″-五甲基–二乙基三胺(PMDETA)催化体系作用下合成了一种新的三嵌段共聚物聚苯乙烯-聚β-羟基丁酸酯-聚苯乙烯(PS-PHB-PS). 共聚物的链结构利用¹H NMR和¹³C NMR进行了表征, 分子量特性和链段组成利用凝胶渗透色谱(SEC)方法进行了测定. 聚合物的分子量随单体转化率的增加而线性增加, 分子量分布指数相对较窄. 这些特征都满足原子转移自由基活性聚合的理想要求. 所得到的共聚物PS-PHB-PS具有较好的生物相容性, 与PHB相比具有良好的耐热性.     

Application of FTIR Microscopy in Combinatorial Experimentation on Polymer Blends

Summary: A novel combinatorial, high-throughput experimentation (HTE) setup has been developed, which allows for rapid mapping of the phase behavior of blends of homopolymers and block copolymers. The principle is based on the preparation of composition (ϕ)-temperature (T) gradient films. Linear ϕ gradients were obtained over a large composition range, as shown by FTIR microscopy. The applicability of this combinatorial approach was demonstrated by studying the phase behavior of a poly(styrene-co-acrylonitrile) (SAN)/poly(methyl methacrylate-co-ethyl acrylate) (PMMA-EA) blend with varying EA content and a poly(styrene-b-butadiene-b-methyl methacrylate) (SBM) triblock copolymer.     

Synthesis of amphiphilic block–graft copolymers [poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)‐g‐poly(acrylic acid)] and their aggregation in water

Novel block–graft copolymers [poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)‐g‐poly(tert‐butyl acrylate)] were synthesized by the atom transfer radical polymerization (ATRP) of tert‐butyl acrylate (tBA) with chloromethylated poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) (SEBS) as a macromolecular initiator. The copolymers were composed of triblock SEBS as the backbone and tBA as grafts attached to the polystyrene end blocks. The macromolecular initiator (chloromethylated SEBS) was prepared by successive hydrogenation and chloromethylation of SEBS. The degree of chloromethylation, ranging from 1.6 to 36.5 mol % according to the styrene units in SEBS, was attained with adjustments in the amount of SnCl₄ and the reaction time with a slight effect on the monodispersity of the starting material (SEBS). The ATRP mechanism of the copolymerization was supported by the kinetic data and the linear increase in the molecular weights of the products with conversion. The graft density was controlled with changes in the functionality of the chloromethylated SEBS. The average length of the graft chain, ranging from a few repeat units to about two hundred, was adjusted with changes in the reaction time and alterations in the initiator/catalyst/ligand molar ratio. Incomplete initiation was detected at a low conversion; moreover, for initiators with low functionality, sluggish initiation was overcome with suitable reaction conditions. The block–graft copolymers were hydrolyzed into amphiphilic ones containing poly(acrylic acid) grafts. The aggregation behavior of the amphiphilic copolymers was studied with dynamic light scattering and transmission electron microscopy, and the aggregates showed a variety of morphologies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1253–1266, 2002     

Macromolecular dynamics of sulfonated poly(styrene-b-ethylene-ran-butylene-b-styrene) block copolymers by broadband dielectric spectroscopy

Macromolecular dynamics of sulfonated poly(styrene-b-ethylene-ran-butylene-b-styrene) (sSEBS) triblock copolymers were investigated using broadband dielectric spectroscopy (BDS). Two main relaxations corresponding to the glass transitions in the EB and S block phases were identified and their temperature dependences were VFT-like. T_g for the S block phase shifted to higher temperature due to restrictions on chain mobility caused by hydrogen bonded SO₃H groups. While the EB block phase T_g appeared to remain constant with degree of sulfonation in DMA experiments, it shifted somewhat upward in BDS spectra. A low temperature relaxation beneath the glass transition of the EB block phase was attributed to short range chain motions. The Kramers–Krönig integral transformation was used to calculate conductivity-free loss permittivity spectra from real permittivity spectra to enhance true relaxation peaks. A loss permittivity peak tentatively assigned to relaxation of internal S-EB interfacial polarization was seen at temperatures above the S block phase glass transition, and the temperature dependence of this relaxation was VFT-like. The fragilities of the EB and S block domains in sulfonated SEBS decreased after sulfonation. The temperature dependence of the dc conduction contribution to sSEBS loss spectra also followed VFT-like behavior and S block segmental relaxation time correlated well with conductivity according to the fractional Debye–Stokes–Einstein equation.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Inverse emulsions in a molten salt/hydroxy-terminated polybutadiene system using block copolymers as emulsifiers

Block copolymers of poly(N-t-butylbenzoyl ethylenimine) and poly(N-propionyl ethylenimine) (B_x/E_y and B_x/E_y/B_x) or poly (N-lauroyl ethylenimine) and poly (N-propionyl ethylenimine) (U_x/E_y) were synthesized by cationic ring-opening polymerization of 2-substituted δ2-oxazolines. Inverse emulsions (salt-in-oil) were made using these block copolymers as emulsifiers, hydroxy-terminated polybutadiene (HTPB) as the nonpolar phase and methyl ammonium ethane sulfonate (MAES) as the polar phase. These inverse emulsions (S/O) were then cured using a triisocyanate to give a dispersion of molten salt (MAES) droplets in polyurethane. Pore sizes of these cured inverse emulsions were measured from scanning electron photomicrographs as a function of stirring time and concentrations of block copolymer and molten salt. The results indicate that pores with diameters in the range of 1.5 X 10^?6 m can be obtained using triblock copolymer B_x/E_y/B_x, and that the surfactant molecules can be spread as a monolayer at the MAES-HTPB interface.     

Synthesis of amphiphilic multiblock and triblock copolymers of polydimethylsiloxane and poly(N,N‐dimethylacrylamide)

The synthesis and spectroscopic characterization of a new family of amphiphilic multiblock and triblock copolymers is described. The synthetic methodology rests on the preparation of telechelic multifunctional and difunctional chain transfer agents easily available in two synthetic steps from commercially available polydimethylsiloxane‐containing starting materials. Telechelic polymers thus synthesized are used as macromolecular chain transfer agents in the reversible addition fragmentation chain transfer (RAFT) polymerization of N,N‐dimethylacrylamide (DMA) enabling the synthesis of (AB)_n‐type multiblock and ABA‐type triblock copolymers of varying compositions possessing monomodal molecular weight distribution. (AB)_n multiblock copolymers [(PDMA‐b‐PDMS)_n] were prepared with between 52 and 95 wt % poly(dimethylacrylamide) with number average molecular weights (M_n) between 14,000 and 86,000 (polydispersities of 1.20–2.30). On the other hand, ABA block copolymers with DMA led to amphiphilic block copolymers (PDMA‐b‐PDMS‐b‐PDMA) with M_n values between 9000 and 44,000 (polydispersities of 1.24–1.62). © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7033–7048, 2008     

Syntheses,characterization, and properties of multiblock copolymers consisting of polyisobutylene and poly(L‐lactide) segments

The syntheses of {‐poly(L ‐lactide) (PLLA)‐b‐polyisobutylene (PIB)‐}_n multiblock copolymers were accomplished for the first time by chain extension of PLLA‐b‐PIB‐b‐PLLA triblock copolymers. Well‐defined PLLA‐b‐PIB‐b‐PLLA triblock copolymers with predictable M_ns, low PDIs (1.10–1.18) and excellent blocking efficiencies were prepared by anionic ring‐opening polymerizations of L ‐lactide initiated with hydroxyallyl telechelic PIB (HO‐Allyl‐PIB‐Allyl‐OH) in toluene at 110 °C. The triblock copolymers were successfully chain extended with 4,4′‐methylenebis(phenylisocyanate) (MDI) to obtain the multiblock copolymers with good gravimetric yields of ～86 to 96%. The chain‐extended polymers were soluble in a range of common organic solvents. The block copolymers showed two glass transition temperatures in differential scanning calorimetric analysis for the PIB and PLLA blocks indicating microphase separation, which was supported by atomic force microscopy images. The as‐synthesized compression molded multiblock copolymers exhibited tensile strengths in the range of 8–24 MPa with elongations at break in the range of 2.5–400%. The static and dynamic mechanical properties showed a strong dependence on the relative PLLA content in the copolymer. The dynamic mechanical analysis also indicated microphase separation at higher PLLA compositions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3490–3505, 2009