The use of ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator for the polymerization of methyl methacrylate

The thermal polymerization of methyl methacrylate [MMA] was carried out using ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator. The rate of polymerization (R_p) increases with increasing monomer and initiator concentrations; The exponent value has been computed to be 1 ± 0.02 and 0.5, respectively. The reaction was carried out at four different temperatures and the overall activation energy has been computed to be 16.01 kcal/mol. The polymerization was inhibited in the presence of hydroquinone as a radical scavanger. Kinetic studies indicates that the overall polymerization takes place by a radical mechanism.     

Radical polymerization behavior of ethyl ortho-formylphenyl fumarate involving intramolecular hydrogen abstraction

The radical polymerization behavior of ethyl ortho-formyl-phenyl fumarate (EFPF) using dimethyl 2,2′-azobisisobutyrate (MAIB) as initiator was studied in benzene kinetically and ESR spectroscopically. The polymerization rate (R_p) at 60°C was given by R_p = k[MAIB]^0.76[EFPF]^0.56. The number-average molecular weight of poly(EFPF) was in the range of 1600–2900. EFPF was also easily photopolymerized at room temperature without any photosensitizer probably because of the photosensitivity of the formyl group of monomer. Analysis of ¹H? and ¹³C-NMR spectra of the resulting polymer revealed that the radical polymerization of EFPF proceeds in a complicated manner involving vinyl addition and intramolecular hydrogen-abstraction. The polymerization system was found to involve ESR-observable poly(EFPF) radicals under the actual polymerization conditions. ESR-determined rate constant (2.4–4.0 L/mol s) of propagation at 60°C increased with decreasing monomer concentration, which is mainly responsible for the observed low de-pendency of R_p on the EFPF concentration. Copolymerizations of EFPF with some vinyl monomers were also examined. © 1995 John Wiley & Sons, Inc.     

Metal-Containing Initiator Systems. 30. Vinyl Polymerization Initiated with Bis(ethyl acetoacetato)copper(II) and Maleimide

Some electron-accepting compounds such as maleimide (MIm), maleic anhydride (MAn), and tetracyanoquinodimethane were found to show pronounced accelerating effects on vinyl polymerization initiated with metal chelates. The polymerization of methyl methacrylate (MMA) initiated with bis(ethyl acetoacetato)-copper(II) (Cu(eacac)₂) and MIm was studied kinetically in benzene. The overall activation energy of the polymerization was calculated to be 11.5 kcal/mol. This value was much lower than that (17.6 kcal/mol) for the polymerization of MMA with Cu(eacac)₂ alone. The polymerization rate (R_p) was expressed as R_p =k[MIm]^1/2 [Cu(eacac)₂]^1/2 [MMA] The first-order dependence of R_p on the monomer concentration indicated that the monomer had no participation in the initiation step, in contrast with polymerization in the absence of MIm (where a monomer concentration dependence of 1.4th order was observed). Electronic spectroscopic study revealed that a complex between MIm and Cu(eacac)₂ had been formed. The ligand radical, an acetylcarboethoxymethyl radical, was trapped by 2-methyl-2-nitrosopropane in the reactions of Cu(eacac)₂ with MIm and with MAn in benzene. From these results the mechanism of the initiation of polymerization is discussed.     

Grafting of Methyl Acrylate onto Cellulose by Ceric Ion

Abstract

Methyl acrylate was grafted onto dissolving pulp by ceric ion in aqueous sulfuric acid under oxygen-free argon. At a low Ce(IV) concentration (up to 1 mmol/L), the rate of polymerization (R_p ) is proportional to [Ce]^0.5 [MA]¹ [cellulose]¹. At higher concentrations of cericion (1–20 mmol/L), R_p is proportional to [Ce]⁰ [M] ^1.5 [cellulose]¹. The mechanism of grafting is consistent with a kinetic scheme involving initiation by primary radicals and termination by growing polymer radicals. Above 20 mmol/L of ceric salt, the data are consistent with the linear termination mode.     

KINETICS OF POLYMERIZATION OF METHYL METHACRYLATE INITIATED BY COPPER POLYPROPYLENE-BASED POLYAMIDOXIME-SODIUM SULFITE SYSTEM*

The aqueous polymerization of methyl methacrylate initiated by copper polypropylene-based polyamidoxime (PPAO-Cu) -sodium sulfite system was investigated. The overall rate of polymerization (R_p) isR_p=9.7 x 10~(12) e~(-21.200/RT) [MMA]~(O.88)[Na_2 SO_3]~(0.50)The length of the induction period (τ) is inversely proportional to the concentration of sodium sultite and independent of the amount of polymer supported copper and the concentration of monomer. It could be expressed as follows:1/τ=1.2x10~(12)e~(-15.600/RT)[Na_2SO_3]=K_τR_iThe polymerization is initiated by a primary radical generated from the redox reaction rather than induced by "coordination-proton transfer" mechanism.     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

Kinetic study of the radical polymerization behavior of N‐(1‐phenylethylaminocarbonyl)methacrylamide

Polymerization of N‐(1‐phenylethylaminocarbonyl)methacrylamide (PEACMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was kinetically studied in dimethyl sulfoxide (DMSO). The overall activation energy of the polymerization was estimated to be 84 kJ/mol. The initial polymerization rate (R_p) is given by R_p = k[MAIB]^0.6[PEACMA]^0.9 at 60 °C, being similar to that of the conventional radical polymerization. The polymerization system involved electron spin resonance (ESR) spectroscopically observable propagating poly(PEACMA) radical under the actual polymerization conditions. ESR‐determined rate constants of propagation and termination were 140 L/mol s and 3.4 × 10⁴ L/mol s at 60 °C, respectively. The addition of LiCl accelerated the polymerization in N,N‐dimethylformamide but did not in DMSO. The copolymerization of PEACMA(M₁) and styrene(M₂) with MAIB in DMSO at 60 °C gave the following copolymerization parameters; r₁ = 0.20, r₂ = 0.51, Q₁ = 0.59, and e₁ = +0.70. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2013–2020, 2005     

Photopolymerization of methyl methacrylate with azo-containing polydimethylsiloxane as photoinitiator: Effect of siloxane chain length

The kinetics of the free radical photopolymerization of methyl methacrylate (MMA) initiated by azo-containing polydimethylsiloxane (PSMAI) and azobisisobutyronitrile (AIBN) was investigated. The greater polymerization rate R_p in MMA/PSMAI systems may be due to the higher value of the initiation rate R_i and the lower value of the termination rate constant k_t than that in MMA/AIBN system. The reaction orders with respect to initiators PSMAI decreased with an increase in polydimethylsiloxane chain length (SCL) in PSMAI. The observed deviations in polymerization rate from rate equation could be explained in terms of primary radical termination. The photoinitiator efficiency Φ of initiators decreased with increase in SCL, while the ratio of the rate constants for chain termination and chain initiation by primary radical increased with SCL. The fraction β of primary radicals entering into termination in MMA/PSMAI systems were larger than that in MMA/AIBN system. © 1996 John Wiley & Sons, Inc.     

Free-Radical-Initiated Copolymerization of A-Methylstyrene with Maleimide

Alternating copolymers of α-methylstyrene (α-MeSt) and maleimide (MI) were prepared by free-radical initiated polymerization at different monomer-to-monomer concentrations in the feed in CHCl₃, as solvent. The equilibrium constant of -MeSt and MI was determined by the transformed Benesi-Hildebrand NMR method in CDCl₃, and has a value of 0.03 L/mol. From the equation R_p = R_p(f) + R_p(CT) proposed by Shirota and coworkers, R_pf) and R_pCT) were calculated, and it was found that the copolymerization of -MeSt with MI proceeds predominantly through participation of the CT complex. Alternating copolymers have a glass transition temperature of 567 K (DSC method). Alternating copolymer decomposes via a one-step reaction at 350°C.     

Aqueous Polymerization of Methyl Methacrylate Initiated by Pyridine-Sulfur Dioxide Complex

The aqueous polymerization of MMA was studied kinetically at 40° C using low concentrations of Py-SO₂ complex as initiator. For [Py-SO₂] < 2 × 10^?2 mol/L, R_p ∞ [PY-SO₂]^0.5 [M]^1.5, and for [Py-SO₂] > 2 × 10^?2 mol/L, R_p ∞ [Py-SO₂]^0,0[M]^1.08. Polymerization is considered to proceed by a radical mechanism. The radical generation or the initiation step is believed to proceed through equilibrium complexation between the Py-SO₂ complex and monomer molecules. For [Py-SO₂] < 2 × 10^?2 mol/L, the polymerization is characterized by bimolecular termination. Above this [Py-SO₂], chain termination by a degradative initiator transfer process assumes prominence.     

Vinyl polymerization. Part 268. Polymerization of acrylonitrile initiated by the system of tetramethyl tetrazene and bromoacetic acid

The polymerization of acrylonitrile (AN) initiated by the system of tetramethyl tetrazene (TMT) and bromoacetic acid (BA) in dimethylformamide (DMF) was studied. The TMT–BA system could initiate the polymerization of AN more easily than TMT alone. The polymerization was confirmed to proceed through a radical mechanism. The initial rate of polymerization R_p was expressed by the equation: R_p = [TMT]^0.62-[BA]^0.5[AN]^1.5. The overall activation energy for the polymerization was estimated as 9.4 kcal/mole. In the absence of monomer, the reaction of TMT with BA in DMF was also studied kinetically by measuring the evolution of nitrogen gas. The reaction was first-order in TMT and first-order in BA; the rate data at 49°C were k₂ = 9.1 × 10^?2l./mole-sec., ΔH? = 17.0 kcal/mole, and ΔS? = ? 6.6 eu. In addition, the treatment of TMT with BA in benzene led to the formation of tetramethylhydrazine radical cation, which was identified by its ESR spectrum. On the other hand, the relatively strong interaction between TMT and DMF was observed by absorption spectrophotometry.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998     

Effects of surface charge density on emulsion kinetics and secondary particle formation in emulsifier-free seeded emulsion polymerization of methyl methacrylate

 Experiments were carried out to investigate the effects of surface charge density on emulsion kinetics and secondary particle formation in emulsifier-free seeded emulsion polymerization. Three monodisperse seed latices with different surface charge densities were prepared from styrene/NaSS comonomers using the two-stage shot-growth process. After purification of the seed latices, they were used in seeded emulsion polymerization of methyl methacrylate. The initial rate of poly-merization and the average number of radicals per particle for the high-charged seed latex system were lower than that of the low-charged case. The low rate of polymerization resulted from the low rate of radical adsorption in the beginning of the reaction due to the electrical repulsion between seeds and oligomeric radicals. In this case, because of the secondary particles, particle size distribution became bimodal. The low rate of radical adsorption and the formation of secondary particles reduced the average number of radicals per particle. The rate of polymerization (R _p) increased, but the rate of polymerization per particle (R _p/N _p) decreased. Received: 9 December 1996 Accepted: 7 March 1997     

Preparations and Polymerizations of p-Substituted Phenyl Vinyl Sulfides. Vinyl Polymerization 168

Abstract

p-Substituted phenyl vinyl sulfides (PVS) were prepared and their radical polymerizations were investigated dilatometrically to determine some kinetic constants and to deduce the influences of the sulfur atom and p-substituents of PVS. It was found that PVS could be easily homopolymerized by ordinary radical polymerization mechanisms in the presence of 2,2′-azobisisobutyronitrile, contrary to the case of phenyl vinyl ethers, which do not homopolymerize.

From the rates of polymerization (R_p H) of PVS and those of p-substituted PVS (R_p X) under the same conditions, the plot of log (R_p H/R_p X) against the Hammett's equation was found to give a parabola curve. When these results were plotted by the modified Hammett's equation [log (k_p X/k_p H) = ρσ + γE_R ], however, a straight line with γ = ?4.5 and ρ = 0.35 was obtained. From these results it was concluded that the 3d orbital resonance was important in the transition state of the polymerization of these monomers.     

Polymerization of Acrylonitrile Initiated by the System Tetramethyl-2-tetrazene and p-Toluenesulfonic Acid

The polymerization of acrylonitrile (AN) initiated by tetramethyl-2-tetrazene (TMT) and p-toluenesulfonic acid (TSA) in dimethylformamide (DMF) was studied. The polymerization was confirmed to proceed through a radical mechanism. The initial rate of polymerization R was expressed by the equation: R_p = k[TMT]^0.6 [TSA]^0.46 [AN]^1.35. The overall activation energy for the polymerization was estimated as 20.7 kcal/mole. In the absence of monomer, the reaction of TMT with TSA was also studied kinetically by measuring the evolution of nitrogen. From these results and ESR measurement of the TMT/TSA system, a possible initiation mechanism is proposed.     

Radical polymerization behavior of vinyl phenylsufonylacetate

Vinyl phenylsulfonylacetate (VPSA) was prepared by the reaction of vinyl chloroacetate with sodium benzenesulfinate in acetone in the presence of a phase-transfer catalyst. VPSA showed a high radical homopolymerizability similar to vinyl acetate in spite of the fact that VPSA carries a phenyl group. The polymerization of VPSA with 2,2^′-azobisisobutyrate (MAIB) was kinetically investigated in acetone. The overall activation energy of the polymerization was 27.6 kcal/mol. The polymerization rate (R_p) at 50 °C was expressed by R_p=k[MAIB]^0.67[VPSA]^1.1. Poly(VPSA) showed exothermic (27 °C) and endothermic (57 °C) peaks in its DCS curve, corresponding to crystallization and melting. The tacticity of poly(VPSA) was estimated to be rr=29, mr=49, and mm=22.     

Photopolymerisation of styrene initiated by triphenyl bismuthonium ylide

Photopolymerization of styrene initiated by tetraphenyl cyclopentadiene triphenyl bismuthonium ylide in dioxane was carried out in the presence of visible light (440 nm) at 30 ± 0.2°C for 55 h. The polymerization was inhibited by the presence of hydroquinone which is an evidence of the fact that polymerization takes place by radical mechanism. The system follows ideal radical kinetics (R_p ∝︁ [I]^0.5 [M]). The values of average degree of polymerization (P_n) decreases with the ylide. The mechanism of the reaction was elucidated by GPC and ESR techniques.     

Electron‐pair‐donor reaction order in the cationic polymerization of isobutylene coinitiated by AlCl3

The cationic polymerizations of isobutylene (IB) initiated by an H₂O/AlCl₃ system were carried out in a mixture of n‐hexane/methylene dichloride of 60/40 v/v at ?50 °C in the presence of various external electron pair donors (EDs), including methyl benzoate (MB), ethyl benzoate (EB), and methyl acrylate (MA). The effects of the concentrations of EDs ([ED]) and polymerization time on monomer conversion and kinetics of IB polymerization were also investigated. The complexes between AlCl₃ and the esters were soluble in the polymerization system at ?50 °C. The polymers with high molecular weights and relatively narrow molecular weight distributions were obtained in the presence of the EDs. The rate of polymerization decreased with increasing [ED]. The kinetic orders of the EDs were remarkably dependent on their chemical structure, steric hindrance from moieties, and concentration in the polymerization system. The reaction order of MB was determined to be around ?1.3 when [MB] ≤ 0.40 mmol/L, whereas it was ?12.9 when [MB] ≥ 0.40 mmol/L. The reaction order of EB was determined to be ?1.36 when [EB] ≤ 0.41 mmol/L, whereas it was ?3.36 when [EB] ≥ 0.41 mmol/L. The reaction order of MA was determined to be ?1.85 when [MA] ≤ 0.48 mmol/L, whereas it was ?16.7 when [MA] ≥ 0.48 mmol/L. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3053–3061, 2007     

Cyclic Acetal-Photosensitized Polymerization. 9. Photopolymerization of Triallylidene Sorbitol

Abstract

The photopolymerization of triallylidene sorbitol (TAS) was carried out in benzene at 40°C without the usual initiator. The polymerization of TAS was found to be initiated with the ester radical generated via the acetal radical from TAS by means of photoirradiation. The rate of polymerization and the molecular weight of polymer were small due to the degradative chain transfer, It was kinetically investigated from the standpoints of the degradative chain transfer by the allylidene group and the cyclization by three double bonds. The following results were obtained: (1) The relation between the rate of polymerization, R_p, the monomer concentration, [M], could be expressed by [M] /R_p = (A[M] + B)/(3[M] + C), where A, B, and C were constant; (2) the ratio of the rate constant of unimolecular cyclization to the total rate constant of bimolecular propagation and the chain transfer of uncyclized radical was estimated to be 3.0 mol/dm³. A small amount of cyclopolymerization took place.