采用纳米金和荧光标记的适配体检测凝血酶

将荧光染料分子标记的含29个碱基的可识别凝血酶的DNA适配体非特异吸附到纳米金表面,荧光发生猝灭,加入凝血酶后,凝血酶与适配体特异性结合,使适配体空间结构发生改变,荧光染料分子远离纳米金表面,荧光恢复,因此可以实现对凝血酶的检测。实验结果表明,这种检测方法简便、快速、特异性强,检出限为0.54 nmol/L(对应样品体积为200μL)。     

钾离子影响下凝血酶适配子在氧化石墨烯表面吸附行为的研究

FAM荧光基团标记的凝血酶适配子通过π-π相互作用、疏水作用等分子间相互作用力与氧化石墨烯(GO)结合;通过向反应体系中加入0~50mmol/L K~+,使用荧光分光光度计记录FAM基团的荧光变化,研究凝血酶适配子在氧化石墨烯表面的吸附行为。不存在K~+时,凝血酶适配子以单链形式吸附在氧化石墨烯表面;随着K~+的加入,凝血酶适配子形成G-四聚体结构,脱离氧化石墨烯表面;当K~+浓度从0mmol/L增加到50mmol/L,K~+屏蔽G-四聚体与氧化石墨烯之间的静电斥力,凝血酶适配子重新吸附到氧化石墨烯表面。研究结果证实,K~+影响下,凝血酶适配子在氧化石墨烯表面存在吸附-解吸-再吸附过程。     

基于适配体亲和毛细管电泳-激光诱导荧光检测的凝血酶分析

以一种高亲和力适配体作为亲和荧光探针,以自建的毛细管电泳-激光诱导荧光(CE-LIF)检测装置为基础,建立了一种高灵敏、快速测定人凝血酶的方法。荧光标记的凝血酶适配体特异性地与凝血酶结合并形成稳定的凝血酶-适配体复合物,采用CE-LIF对复合物进行分离检测,从而测定凝血酶浓度。探讨了盐离子种类及浓度对适配体与凝血酶结合的影响,并在选定的电泳条件下对凝血酶检测的线性范围、检出限和重现性进行了测定。结果表明,盐离子存在的条件下适配体与凝血酶的亲和力降低,不利于两者的结合;人血清溶液中,凝血酶浓度在0.25～10 nmol/L范围内与复合物峰面积具有良好的线性相关性(r20.991),检出限(S/N3)为55.6 pmol/L;精密度和回收率测定结果均能满足分析的要求。     

基于滚环合成的聚分子信标用于 凝血酶的靶向检测

采用滚环扩增(RCA)合成得到的DNA长链打开带适配体的分子信标, 由于RCA长链上带有多个与分子信标(MB)互补的重复序列, 其打开分子信标的能力比单一互补短链提高了上百倍. 所形成的聚多价分子信标组装体, 在分子信标浓度相同的情况下, 打开后的荧光强度也大幅上升; 并且由于组装体上多价适配体的存在, 聚分子信标对凝血酶的靶向能力显著增强. 实验结果表明, 聚分子信标结合凝血酶后, 其荧光信号与凝血酶浓度呈线性关系, 检测灵敏度达到0.2 nmol/L, 该体系的构建有利于实现对凝血酶的高灵敏、 特异性检测.     

基于碳纳米颗粒的荧光适配体传感器用于腺苷脱氨酶的检测

设计了一段羧基荧光素(FAM)标记的适配体,该适配体能与腺苷进行高亲和力和强特异性的结合,而不与肌苷发生作用。腺苷脱氨酶可以与腺苷发生脱氨反应,生成肌苷。基于上述原理,构建了碳纳米颗粒-适配体-腺苷荧光适配体传感器用于腺苷脱氨酶的检测。当体系中没有腺苷脱氨酶时,FAM标记的适配体与腺苷紧密结合,而不能被碳纳米颗粒吸附,体系荧光较强;当体系中存在腺苷脱氨酶时,腺苷变成肌苷,肌苷不与适配体结合,此时FAM标记的适配体被碳纳米颗粒吸附,FAM荧光淬灭,体系具有较低的荧光强度。该方法简单、灵敏,线性范围为0.25～3.125 U/mL,检出限为0.18 U/mL。与其它蛋白分子相比,方法对腺苷脱氨酶的检测具有高特异性。构建的传感器简单,再生性好,可用于标准加入法检测小鼠血清中的腺苷脱氨酶。     

基于纳米金适配体传感器的激光诱导检测凝血酶

利用激光可使纳米金修饰的双链DNA(dsDNA)去杂化和适配体的特异性,设计了一种新颖、稳定、可控且高灵敏的凝血酶检测方法。将两端分别修饰金纳米粒子与荧光标记物的核酸适配体与其互补链杂化制成稳定的dsDNA传感器,当凝血酶存在时,通过激光触发传感器去杂化释放适配体并与凝血酶结合,拉近金纳米粒子与荧光标记物的距离,产生猝灭使荧光信号发生变化。对激光照射时间、激光输出功率、温育时间等条件进行优化。在最优条件下,荧光强度变化值(ΔI)与凝血酶浓度在0.55~33 nmol/L范围内呈现出良好的线性关系,其线性回归方程为y=0.0082x+0.2714,相关系数R^2为0.98,血清中加标回收率为95.5~102.7%,且溶菌酶等无明显干扰。该方法可作为凝血酶的检测方法。     

基于微磁珠分离技术的适配体实时定量PCR检测方法

利用适配体的识别能力和可扩增性, 构建了基于微磁珠分离技术的适配体实时定量聚合酶链式反应(PCR)检测方法. 通过微磁珠偶联的互补链与适配体序列之间的碱基配对结合, 有效除去溶液中未与靶分子结合的适配体序列, 采用实时定量PCR技术测定上清液中结合态的适配体序列浓度, 从而间接实现对靶分子的定量检测. 分别选取代表生物大分子和有机小分子的凝血酶和ATP作为检测对象, 验证了该方法的普适性. 研究结果表明, 在获取特异性适配体序列后, 仅需简单优化其互补链序列, 即可对超低含量的凝血酶和ATP进行准确定量, 检出限分别为50 pmol/L和5 μmol/L. 该方法具有同时适用于高特异性和高灵敏度地检测生物大分子和有机小分子的优势.     

基于双重猝灭原理的分子信标定量检测凝血酶

利用G碱基和有机猝灭基团对荧光基团的双重猝灭作用构建了分子信标,建立了一种基于双重猝灭原理的检测凝血酶的简单方法.此分子信标中荧光基团设计为羧基荧光素(FAM),有机猝灭基团设计为Black Hole Quencher 1(BHQ-1),BHQ-1连接3个含有G碱基的核苷酸,分子信标的环设计为凝血酶的核酸适配体.体系中没有凝血酶时,分子信标呈茎环结构,荧光基团FAM与有机猝灭基团BHQ-1及G碱基相互靠近,FAM的荧光在BHQ-1及G碱基的双重猝灭下,其荧光信号很弱;当体系中有凝血酶存在时,分子信标与凝血酶特异性结合,形成G-四联体结构,茎-环结构被破坏,FAM远离猝灭基团BHQ-1及G碱基,其荧光得到恢复.在最适条件下,体系的荧光强度(△I)与凝血酶的浓度(C)在0.4~40 nmol/L范围内具有良好的线性关系,线性回归方程为△I=24.63C(nmol/L)+13.06(R2=0.9972),检出限为0.18 nmol/L(3σ,n=9).实际血样加标回收率为96.3%~98.7%.     

基于无标记的核酸适配体荧光生物传感器检测凝血酶

设计了一个简单、通用、基于核酸适配体无标记的高敏感、高专一检测凝血酶的荧光方法。以无标记凝血酶核酸适配体单链DNA为识别元素,Pico Green染料传导互补双链的荧光信号。Pico Green是一种不对称菁,当其单独存在时不产生荧光信号,而当其被吸附到互补的双链DNA上时,可产生很强的荧光信号,但被吸附到单链DNA上时,却无明显的信号改变。基于该性质,将其用于凝血酶的检测。该方法对凝血酶的响应线性范围为1.0×10~(-14)~1.0×10~(-7)mol/L,相关系数(r~2)为0.99,检出限为1.0×10~(-14)mol/L。1.0×10~(-8)mol/L两种干扰物质(牛血清蛋白和细胞色素C)的存在不影响凝血酶的检测,表明该方法对凝血酶具有非常好的专一性。该方法成功应用于对人血清样品的检测,其平均回收率为97%~102%。方法可简单、灵敏、特异性地检测凝血酶,有望用于医学临床诊断等领域。     

基于硫代黄素T诱导G-四联体构成的生物传感器检测铅离子

硫代黄素T(ThT)荧光分子在自由状态下荧光强度很弱, 通过在Tris-HCl缓冲液中加入Pb²⁺的适配体即富含G的DNA序列, 可与ThT荧光分子形成G-四联体结构, 使荧光信号迅速增强; 向溶液中加入Pb²⁺, Pb²⁺与其适配体有很好的结合特异性, 可生成更牢固的G-四联体结构, 使ThT分子被释放出来, 导致溶液的荧光强度降低, 基于此可检测溶液中的Pb²⁺离子. 实验中优化了缓冲溶液组成、 ThT荧光分子浓度、 Pb²⁺适配体浓度及反应时间等条件. 结果表明, 在10 mmol/L Tris-HCl(pH=8.3, 含2 mmol/L MgCl₂)缓冲溶液中, ThT荧光分子和Pb²⁺适配体的浓度分别为10 μmol/L和200 nmol/L, 反应10 min时, 随着溶液中Pb ²⁺浓度的增加, 荧光强度减弱. Pb²⁺浓度在20~1000 nmol/L范围内时, 荧光强度与Pb²⁺的浓度呈现良好的线性关系(R²=0.9941), 检出限为1 nmol/L. 实际水样测试结果表明, 该方法的回收率在98.8%~101.3%之间. 该传感器灵敏、 快速、 无需化学修饰荧光分子且成本低.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.