磁性壳聚糖-聚丙烯酸微球固载BSA研究

以牛血清白蛋白(BSA)为模拟蛋白药物,以吸附的方法就磁性壳聚糖-聚丙烯酸微球对BSA的固载效果进行探讨,研究了制备条件(丙烯酸浓度、交联时间、交联剂用量、搅拌速度)和环境因素(溶液的pH、离子强度E、温度T、BSA初始浓度)对其固载效果的影响,并对吸附动力学进行了讨论。结果表明,合成的最佳条件为20%的丙烯酸(AA)10mL、25%戊二醛4mL、交联时间30min、低搅拌速度(r<1000r/min)。磁性壳聚糖-聚丙烯酸微球在固载BSA的过程中受到环境因素(溶液的pH、离子强度E、温度T、BSA初始浓度)的影响,在pH=4.6的磷酸缓冲液中,T=37℃条件下磁性壳聚糖-聚丙烯酸微球对BSA的固载量较大,可达到400mg/g。     

反相微乳液合成30～100nm磁性聚合物纳米微球

利用反相微乳液一步法成功地制备了磁性聚合物纳米微球,微球粒径在30～100nm左右,均一性较好,研究表明,Fe(Ⅱ)浓度对微乳液和微胶乳的稳定性有很大影响,碱的种类、AOT和单体的含量能控制微球粒径,用振动探针式磁强仪(VSM)测定了不同比例的[Fe(Ⅱ)]/[Fe(Ⅲ)]所合成的聚合物微球的磁性,发现温度对合成高磁饱和强度和超顺磁性起关键作用,合成的磁性聚合物微胶乳透明且稳定性较好.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

免疫磁性纳米微球的制备与表征

成功制备了Fe3O4磁性纳米颗粒及二甲基丙烯酸乙二醇酯-甲基丙烯酸(EGDMA-MAA)共聚物包覆的Fe3O4磁性复合微球。将吲哚美辛抗体固定在复合微球表面,形成了Fe3O4(核)/聚合物-抗体(壳)的复合免疫磁性颗粒。XRD结果表明,制备的Fe3O4的晶型为反立方尖晶石型且纯度较高;TEM表征表明Fe3O4粒径较为均匀,平均粒径为12nm;磁性复合微球的平均直径为460nm。制备的Fe3O4磁性纳米颗粒和磁性复合微球有较强的磁响应强度,其饱和磁化率分别为49.16和8.38emu/g,能够满足磁性分离的要求。FT IR验证了磁性复合微球中羧基特征峰的存在,表明羧基成功连接在磁性微球上面。通过碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)活化法将微球表面羧基活化并成功与抗吲哚美辛抗体交联。     

磁性壳聚糖复合微球的制备及其Cu~(2+)吸附性能

以球磨后的粉煤灰磁珠(MS)颗粒为磁核,通过溶胶凝胶法和反相微乳液法依次包覆SiO_2和壳聚糖(CS),制备了MS@SiO_2@CS磁性微球。利用扫描电镜及能量色散谱仪、热重分析仪、红外光谱仪、X射线衍射仪、振动样品磁强计对所得样品的结构和磁性进行了系统表征。结果表明,磁珠颗粒表面实现了逐层包覆,较均匀的分散于壳聚糖基体中,MS@SiO_2@CS微球的比饱和磁化强度可达7.04 emu·g~(-1)。Cu~(2+)离子吸附实验表明,所得磁性壳聚糖微球对Cu~(2+)具有良好的吸附能力,最大吸附量可达11.08 mg·g~(-1);而且可通过磁选法高效固液分离。吸附动力学研究表明,MS@SiO_2@CS微球对Cu~(2+)离子的吸附符合准二级动力学模型,以化学吸附为主。     

磁性壳聚糖微球的制备及对Cr(Ⅵ)的吸附性能研究

用壳聚糖包埋磁流体,用戊二醛交联制成磁性壳聚糖微球,并用红外光谱表征其结构。用制备的磁性壳聚糖微球吸附Cr(Ⅵ)离子,考察了其对Cr(Ⅵ)离子的吸附性能;探讨了吸附时间、溶液pH值、吸附剂用量、温度、Cr(Ⅵ)起始浓度以及其他离子存在对Cr(Ⅵ)离子去除率的影响。实验结果表明,磁性壳聚糖微球吸附Cr(Ⅵ)离子的最佳条件为:吸附平衡时间40 min,最佳吸附pH值6左右,磁性壳聚糖微球用量10 mg,温度升高有利于提高磁性壳聚糖微球的吸附效率,Cr(Ⅵ)离子起始质量浓度为12μg/mL,无机盐的存在引起磁性壳聚糖微球的吸附性能降低。并且考察了吸附剂的再生性能,实验结果表明磁性壳聚糖微球具有良好的重复使用性。     

具有核壳结构磁性复合微球的制备与表征

采用两步法制备了具有核壳结构的Fe3O4/P(MMA/DVB)(core)-P(St/GMA/DVB)(shell)磁性复合微球.首先,用改进的细乳液聚合制备了Fe3O4/P(MMA/DVB)微球;然后,加入总量不同的苯乙烯(St)、甲基丙烯酸缩水甘油酯(GMA)和二乙烯基苯(DVB),通过种子乳液聚合,制备了不同磁含量的核壳结构的磁性复合微球.分别用X-射线衍射(XRD)、高倍透射电镜(HR-TEM)、热重分析(TGA)、振动样品磁力计(VSM)等手段对磁性微球的性能进行了表征.实验结果表明,Fe3O4/P(MMA/DVB)微球的磁含量为84 wt%;通过改变加入壳层单体的量,核壳复合微球的磁含量可控在20 wt%~76 wt%之间.该微球具有超顺磁性,相应的饱和磁化强度为12~50Am2/kg.     

PEI改性磁性壳聚糖微球的制备及其对布洛芬的吸附性能

采用共沉淀法制备磁性Fe_3O_4纳米粒子,然后在乳化体系中,以戊二醛为交联剂,通过席夫碱反应制备了改性磁性壳聚糖微球(Fe_3O_4@CS)以及聚乙烯亚胺(PEI)改性磁性壳聚糖微球(Fe_3O_4@CS/PEI)。采用红外光谱、X射线粉末衍射、磁滞回线测定、扫描电子显微镜和动态光散射对微球的结构、粒径以及磁性进行了表征,通过紫外-可见分光光度计研究了微球对布洛芬的吸附能力和重复利用率。结果表明,在微球制备过程中发生的席夫碱反应不会对纳米Fe_3O_4的晶型产生影响。微球均呈现出规整的球形,分布较窄,且具有一定的磁响应性,对布洛芬的吸附模型符合Langmuir吸附等温模型和二级动力学模型。随着PEI用量的增加,微球对布洛芬的吸附能力增强,经Langmuir吸附方程拟合的最大吸附量为138.63 mg/g。同时,微球具有良好的重复使用效率,重复5次后仍能达到初始吸附量的90%以上。     

壳聚糖包覆磁性纳米粒子的制备和表征以及蛋白质吸附特性

制备了一种壳聚糖包覆的磁性纳米粒子,并对其进行了表征和蛋白吸附特性研究.首先通过共沉淀法制备了表面羧基功能化的磁性纳米粒子(MNP-COOH),然后通过静电相互作用将壳聚糖自组装在MNPCOOH粒子表面,在甲醛保护氨基的情况下,利用环氧氯丙烷交联粒子表面壳聚糖上的羟基,交联完成后脱去氨基保护剂,制得表面富含氨基的壳聚糖包覆磁性纳米粒子(MNP-CS).分别使用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、傅里叶变换红外光谱仪(FTIR)、热重分析仪(TGA)、震动样品磁强计(VSM)和zeta电位仪等对制得的MNP-CS进行表征.结果表明,壳聚糖成功地被包裹在磁性纳米颗粒表面.颗粒可完全分散于pH=1~14的水溶液中,形成均匀溶胶,Fe3O4磁核能抵抗0.1 mol/L的HCl溶液腐蚀.MNP-CS颗粒直径为10~20 nm,饱和磁化值为50.05 emu/g,剩磁和矫顽力近似为零,具有明显的超顺磁性.制得的磁性纳米粒子吸附BSA时呈明显的S型等温吸附特性,单层吸附量约为300 mg/g.     

羧甲基壳聚糖磁性纳米粒子的合成及应用

通过合成油酸修饰的Fe3O4纳米粒子和羧甲基壳聚糖直接包埋油酸修饰的Fe3O4纳米粒子的两步合成法制备了羧甲基壳聚糖磁性纳米粒子。采用透射电子显微镜、傅里叶变换红外光谱、振动样品磁强计和同步热分析测试技术对制备的羧甲基壳聚糖磁性纳米粒子进行了表征。所得磁性纳米粒子呈规则球形,粒径约为10 nm;表面含羧基,且具有很好的顺磁性和稳定性。考察了羧甲基壳聚糖磁性纳米粒子对阿霉素的载药量和对阿霉素在磷酸盐缓冲溶液中的缓释性能。结果表明,磁性纳米粒子对阿霉素展示了较高的载药量(91.8 mg/g),结合了阿霉素的磁性复合物对阿霉素的缓释作用明显,说明制备的羧甲基壳聚糖磁性纳米粒子有望作为治疗肿瘤的纳米磁靶向药物输送载体。     

分散聚合研究

介绍了分散聚合制备聚合物微球的研究进展，对分散聚合的成核与稳定机理、聚合过程、动力学、反应参数对聚合物微球粒径及分散性的影响以及运用分散聚合制备功能性聚合物微球及聚合物－－磁性材料复合微球的研究现状进行了回顾。     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Preparation and characterization of core-shell polystyrene/polychloromethylstyrene and hollow polychloromethylstyrene micrometer-sized particles of narrow-size distribution

Polystyrene core microspheres of narrow-size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2-methoxy ethanol. Polystyrene/polychloromethylstyrene and polystyrene/poly(chloromethylstyrene-divinylbenzene) core-shell microspheres of narrow-size distribution were prepared by seeded emulsion polymerization of chloromethylstyrene or chloromethylstyrene and divinylbenzene in the presence of the polystyrene core microspheres at 71 °C. Core-shell particles with different properties (size, surface morphology, and composition) have been prepared by changing various parameters belonging to the emulsion polymerization process, e.g., volume of the chloromethylstyrene and the volume ratio of chloromethylstyrene to divinylbenzene. Dissolution of the polystyrene core of the polystyrene/poly(chloromethylstyrene-divinylbenzene) core-shell particles resulted in the formation of crosslinked hollow polychloromethylstyrene microspheres, broken crosslinked polychloromethylstyrene shells, or particles containing voids, depending on the composition of the polystyrene/poly(chloromethylstyrene-divinylbenzene) particles.     

Facile synthesis of nanocrystal encoded fluorescent silica microspheres

Monodisperse CdTe composite microspheres with a spherical shape were prepared using organosilane chemicals in aqueous solution. CdTe nanocrystals (NCs) were loaded into the matrix of silica microspheres during the formation of composite microspheres. Detailed characterization of the CdTe composite microspheres by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and spectrofluorimeter was performed to elucidate the morphology and fluorescence of the composite microspheres. In contrast to CdTe NCs in aqueous solution, CdTe NCs in the composite microspheres revealed high stability and fluorescence due to the confined effects of silica matrix. In addition, multicolored CdTe QDs were encoded into the microspheres at precise ratios.     

磁性高分子微球的合成研究─—带醛基磁性高分子微球的合成及表征

用超声波分散处理Ｆｅ３Ｏ４粉末同稳定剂溶液的分散体系，使Ｆｅ３Ｏ４粉末能稳定地分散成细微粒子，同时增强了Ｆｅ３Ｏ４细微粒子同单体、引发剂的亲合性。苯乙烯—丙烯醛共聚物为高分子壳层，包裹Ｆｅ３Ｏ４得到了带醛基的磁性高分子复合微球。微球粒径可控制在５０～２００μｍ，微球中Ｆｅ３Ｏ４含量在０．４～１．５％之间，通过电导滴定法测定微球表面醛基含量在０．０４～０．１ｍｍｏＬ·ｇ－１范围内。着重考察了引发剂体系、稳定剂体系、分散介质等对微球粒径、表面醛基含量的影响。     

复合微球的制备、性能及应用

本文综述了复合微球的制备、性能及其应用，并对其发展趋势作了展望．     

Dispersion polymerization of styrene in polar solvents: Effect of reaction parameters on microsphere surface composition and surface properties,size and size distribution,and molecular weight

Polystyrene microspheres were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2-methoxy ethanol. Surface characterization of the formed particles was performed by x-ray photoelectron spectroscopy and critical surface tension measurements. The influence of different reaction parameters, i.e., monomer concentration, stabilizer type (polyvinylpyrrolidone, copolymers of vinylpyrrolidone and vinylacetate and polyvinylace tate), stabilizer concentration and molecular weight, and initiator type and concentration, on the molecular weight and on the size and size distribution of the formed polystyrene microspheres was investigated. The correlation between the surface composition and wett ability properties of the particles surface and their size and size distribution was also demonstrated. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1857–1871, 1996     

Polymer Nano- and Microparticle Based Systems for Medical Diagnostics

Summary: Synthesis, properties and medical diagnostic applications of hydrophilic nano- and microspheres with carboxyl, aldehyde and hydroxyl groups on their surface are described. The particles were obtained by emulsion copolymerization of styrene, acrolein, methyl methacrylate, methacrylic acid, and 2-hydroxyethyl methacrylate carried on in water media and initiated with potassium persulfate. Stabilization of particles' suspensions was provided by addition of sodium dodecyl sulfate to polymerizing mixture or by formation of surfactants in situ in copolymerization involving acrolein or α-tert-butoxy-ω-vinylbenzyl-polyglycidol macromonomer (PGL). Relations between interfacial properties of these particles and their ability for covalent immobilization of proteins, with eliminated or at least reduced nonspecific adsorption of these species were investigated. The particles with covalently attached proteins (antigens or antibodies) were used for preparation of diagnostic tests based on visual or turbidimetric observation of particles' aggregation or by monitoring changes in their electrophoretic mobility accompanying specific antigen (or antibody) binding. The later test was directed toward determination of antibodies against Helicobacter pylori. Principle of a new type of diagnostic test based on photonic crystals of microspheres are described.     

Magnetic microspheres for targeting of drugs

Magnetic microspheres were prepared from starch. The microspheres could be crosslinked with various agents, and drugs could be entrapped adsorbed, or covalently coupled to the microspheres.     

十二烷基苯磺酸钠改性的尿素和甲醛聚合杂化法合成氧化硅微球

本文在存在十二烷基苯磺酸钠时利用正硅酸乙酯水解液中尿素和甲醛的结晶性聚合反应合成得到了氧化硅微球。首次考察了尿素和甲醛的物质的量比、尿素和甲醛的总用量、正硅酸乙酯(TEOS)用量、酸用量、以及十二烷基苯磺酸钠用量对所得氧化硅微球结构和形貌特征的影响。适当选择这些用量范围可以得到结构稳定、分散均匀的氧化硅微球。在微球生长中尿素和甲醛的量不足时,其突出的结晶性聚合与氧化硅杂化反应进程相互影响,导致了氧化硅微球核壳结构的形成。酸用量增加使氧化硅微球的孔径分布从复杂的双峰转变成均匀的单峰。表面活性剂的使用使氧化硅微球的孔分布从0～80 nm范围内的连续分布转化成单一分布。这些结果对正硅酸乙酯水解液直接合成氧化硅微球方法的推广和应用具有重要指导意义。