A new organic superconductor beta-(meso-DMBEDT-TTF)2PF6

A newly synthesized donor meso-DMBEDT-TTF [DMBEDT-TTF = 2-(5,6-dihydro-1,3-dithiolo[4,5-b][1,4]dithiin-2-ylidene)-5,6-dihydro-5,6-dimethyl-1,3-dithiolo[4,5-b][1,4]dithiin] afforded a superconducting salt beta-(meso-DMBEDT-TTF)2PF6, with a transition temperature at 4.3 K (onset) under a hydrostatic pressure of 4.0 kbar.     

Thieno[3,4-b]pyrazines and their applications to low band gap organic materials

The application of fused-ring thieno[3,4-b]pyrazines in conjugated organic polymers has been found to be a powerful approach to the production of low band gap materials. While thieno[3,4-b]pyrazine-based materials date back to the early 1990s, significant advances in the preparation and scope of thieno[3,4-b]pyrazine-based materials have been reported in recent years, primarily in response to the increasing demand for reduced band gap materials in photovoltaic devices. In this review, we provide an overview of thieno[3,4-b]pyrazines and their application to conjugated materials, highlighting in particular the recent advances in the breadth of thieno[3,4-b]pyrazine building blocks and the promise of tuning materials to achieve optimal properties for specific applications.     

Diindenothieno[2,3-b]thiophene arene for efficient organic photovoltaics with an extra high open-circuit voltage of 1.14 ev

We report a novel diindenothieno[2,3-b]thiophene ladder-type hexacyclic arene for constructing a donor-acceptor copolymer PDITTDTBT. A device based on PDITTDTBT:PC(71)BM exhibited a high V(oc) of 0.92 V with an impressive PCE of 5.8%, while a PDITTDTBT:DMPCBA-based device showed an extra high V(oc) of 1.14 V.     

Linear- and angular-shaped naphthodithiophenes: selective synthesis, properties, and application to organic field-effect transistors

A straightforward synthetic approach that exploits linear- and angular-shaped naphthodithiophenes (NDTs) being potential as new core structures for organic semiconductors is described. The newly established synthetic procedure involves two important steps; one is the chemoselective Sonogashira coupling reaction on the trifluoromethanesulfonyloxy site over the bromine site enabling selective formation of o-bromoethynylbenzene substructures on the naphthalene core, and the other is a facile ring closing reaction of fused-thiophene rings from the o-bromoethynylbenzene substructures. As a result, three isomeric NDTs, naphtho[2,3-b:6,7-b']dithiophene, naphtho[2,3-b:7,6-b']dithiophenes, and naphtho[2,1-b:6,5-b']dithiophene, are selectively synthesized. Electrochemical and optical measurements of the parent NDTs indicated that the shape of the molecules plays an important role in determining the electronic structure of the compounds; the linear-shaped NDTs formally isoelectronic with naphthacene have lower oxidation potentials and more red-shifted absorption bands than those of the angular-shaped NDTs isoelectronic with chrysene. On the contrary, the performance of the thin-film-based field-effect transistors (FETs) using the dioctyl or diphenyl derivatives were much influenced by the symmetry of the molecules; centrosymmetric derivatives tend to give higher mobility (up to 1.5 cm(2) V(-1) s(-1)) than axisymmetric ones (～0.06 cm(2) V(-1) s(-1)), implying that the intermolecular orbital overlap in the solid state is influenced by the symmetry of the molecules. These results indicate that the present NDT cores, in particular the linear-shaped, centrosymmetric naphtho[2,3-b:6,7-b']dithiophene, are promising building blocks for the development of organic semiconducting materials.     

Thieno[3,2-b]thiophene-diketopyrrolopyrrole-containing polymers for high-performance organic field-effect transistors and organic photovoltaic devices

We report the synthesis and polymerization of a novel thieno[3,2-b]thiophene-diketopyrrolopyrrole-based monomer. Copolymerization with thiophene afforded a polymer with a maximum hole mobility of 1.95 cm(2) V(-1) s(-1), which is the highest mobility from a polymer-based OFET reported to date. Bulk-heterojunction solar cells comprising this polymer and PC(71)BM gave a power conversion efficiency of 5.4%.     

基于含硫芳杂稠环化合物的可溶性共轭齐聚物的合成、表征及其在有机薄膜晶体管中的应用

设计并合成了4个基于含硫芳杂稠环化合物的可溶性共轭齐聚物,即以3-十一烷基苯并[d,d’]噻吩并[3,2-b;4,5-b ’]并二噻吩(BTTT)为末端芳香单元,噻吩(T)、二噻吩(bT)、N-十二烷基-二噻吩并[3,2-b]吡咯(TP)或2,5-双(3-十二烷基噻吩)[3,2-b]并二噻吩 (qT)为中间芳香单元的...     

High-performance organic semiconductors: asymmetric linear acenes containing sulphur

Two new linear acenes with fused thiophene units have been synthesized. These acenes have conjugation lengths between anthracene and pentacene. Thin films of these linear molecules were characterized by ultraviolet spectroscopy, X-ray diffraction, atomic force microscopy (AFM), and field-effect transistor measurements. Submonolayer AFM studies show growth that greatly resembles pentacene, while thin-film growth is dendritic. Mobilites as high as 0.47 cm2 V-1 s-1 have been found for the tetraceno[2,3-b]thiophene and are as high as 0.15 cm2 V-1 s-1 for anthra[2,3-b]thiophene.     

Electrophilic cyclization of o-acetoxy- and o-benzyloxyalkynylpyridines: an easy entry into 2,3-disubstituted furopyridines

[reaction: see text] 2,3-Disubstituted furo[3,2-b]pyridines, 2,3-disubstituted furo[2,3-b]pyridines, and 2,3-disubstituted furo[2,3-c]pyridines are readily prepared under mild conditions via the palladium-catalyzed cross-coupling of 1-alkynes with o-iodoacetoxy- or o-iodobenzyloxypyridines, followed by electrophilic cyclization by I(2) or by PdCl(2) under a balloon of carbon monoxide.     

Reduced band gap dithieno[3,2-b:2',3'-d]pyrroles: new n-type organic materials via unexpected reactivity

Direct addition of tetracyanoethylene to N-(p-hexylphenyl)dithieno[3,2-b:2',3'-d]pyrrole yields not only the aromatic mono- and bis-tricyanovinyl-substituted products but also a quinoidal product with dicyanomethylene groups. The analogous reaction with dithieno[3,2-b:2',3'-d]thiophene yields exclusively the aromatic mono-tricyanovinyl product. The aromatic and quinoidal products possess red-shifted absorptions, increased electron affinities, and favorable pi-stacking motifs in comparison to the unsubstituted oligomers.     

A series of dithienobenzodithiophene based small molecules for highly efficient organic solar cells

Three acceptor-donor-acceptor (A-D-A) small molecules DCAODTBDT, DRDTBDT and DTBDTBDT using dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene as the central building block, octyl cyanoacetate, 3-octylrhodanine and thiobarbituric acid as the end groups were designed and synthesized as donor materials in solution-processed photovoltaic cells (OPVs). The impacts of these different electron withdrawing end groups on the photophysical properties, energy levels, charge carrier mobility, morphologies of blend films, and their photovoltaic properties have been systematically investigated. OPVs device based on DRDTBDT gave the best power conversion efficiency (PCE) of 8.34%, which was significantly higher than that based on DCAODTBDT (4.83%) or DTBDTBDT (3.39%). These results indicate that rather dedicated and balanced consideration of absorption, energy levels, morphology, mobility, etc. for the design of small-molecule-based OPVs (SM-OPVs) and systematic investigations are highly needed to achieve high performance for SM-OPVs.     

A facile method for building fused quinoxaline-quinolinones via an acidless post-Ugi cascade reaction

A series of quinolino[3,4-b]quinoxalin-6(5H)-ones have been synthesized using an Ugi/deprotection/cyclization(UDC) strategy, followed by a nucleophilic aromatic substitution reaction. This facile microwave-assisted method provided good yields and could potentially be used for the construction of a diverse library of quinolino[3,4-b]quinoxalin-6(5H)-ones for high-throughput screening in medicinal chemistry.     

Thiadiazoloquinoxaline and benzodithiophene bearing polymers for electrochromic and organic photovoltaic applications

Abstract

Two novel thiadiazoloquinoxaline and benzodithiophene (BDT) bearing copolymers were designed and synthesized. Different BDT units (alkoxy and thiophene substituted) were used as donor materials and the effect of alkoxy and thiophene substitution on the electrochemical, spectroelectrochemical and photovoltaic properties were investigated. Both polymers exhibited low oxidation potentials at around 0.90 V and low optical band gaps at around 1.00?eV due to the insertion of electron poor thiadiazoloquinoxaline unit into the polymer backbone. Both P1 (poly-6,7-bis(3,4-bis(decyloxy)phenyl)-4-(4,8-bis(nonan-3-yloxy)benzo[1,2-b:4,5-b']dithiophen-2-yl)-[1, 2, 5]thiadiazolo[3,4-g]quinoxaline) and P2 (poly- 4-(4,8-bis(5-(nonan-3-yl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophen-2-yl)-6,7-bis(3,4-bis(decyloxy)phenyl)-[1, 2, 5]thiadiazolo[3,4-g]quinoxaline) exhibited multichromic behavior with different tones of greenish yellow and gray in the neutral and fully oxidized states, respectively. In addition, both polymers revealed very high optical contrasts (～87%) in the NIR region which make these promising polymers good candidates for NIR applications. Finally, in order to explore the organic photovoltaic performances, P1 and P2 were mixed with PC₇₁BM in the active layer of organic solar cells (OSCs) by conventional device structure. As a result P1 and P2 based devices revealed power conversion efficiencies (PCEs) of 0.33% and 0.60% respectively. However, the additive treatment enhanced PCE from 0.49 to 0.73% for P2 based devices.     

Benzo[1,2-b:4,5-b']bis[b]benzothiophene as solution processible organic semiconductor for field-effect transistors

Coplanar benzo[1,2-b:4,5-b']bis[b]benzothiophenes (, ) for the application in organic field-effect transistors were synthesized by a simple two-step procedure involving triflic acid induced ring-closure reaction; such solution processed devices show a hole mobility of up to 0.01 cm(2) V(-1) s(-1).     

The synthesis of dinaphthothiophenes

The synthesis of dinaphtho[1,2-b:2′,3′-d]thiophene ( 6 ), dinaphtho[2,1-b:2′,3′-d]thiophene ( 15 ), dinaphtho-[1,2-b:1′,2′-d]thiophene ( 20 ), dinaphtho[2,1-b:1′,2′-d]thiophene ( 26 ), dinaphtho[2,3-b:2′,3′-d]thiophene ( 37 ) and dinaphtho[1,2-b:2′,1′-d]thiophene ( 45 ) has been accomplished.     

Indazoles in organic synthesis: Formation of some fused heterocycles

Derivatives of pyrimido(1,2-b)indazole and s-triazino(1,2-b)indazole were prepared by several different routes and some transformations are described.     

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes: a new class of high-performance semiconductors for organic field-effect transistors

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes including thiophene, selenophene, and tellurophene analogues as organic semiconductors for field-effect transistors were effectively synthesized in three steps from commercially available 1,4-dibromobenzene. All three benzodichalcogenophenes acted as good p-type semiconductors, and particularly the selenophene analogue, 2,6-diphenylbenzo[1,2-b:4,5-b']diselenophene, showed high FET mobility of 0.17 cm2 V-1 s-1.     

Structural effects on the electronic properties of extended fused-ring thieno[3,4-b]pyrazine analogues

The synthesis and characterization of the extended thieno[3,4-b]pyrazine analogues acenaphtho[1,2-b]thieno[3,4-e]pyrazine (3a), 3,4-dibromoacenaphtho[1,2-b]thieno[3,4-e]pyrazine (3b), 3-octylacenaphtho[1,2-b]thieno[3,4-e]pyrazine (3c), dibenzo[f,h]thieno[3,4-b]quinoxaline (4), and thieno[3',4':5,6]pyrazino[2,3-f][1,10]phenanthroline (5) are reported. Comparison of structural, electrochemical, and photophysical properties to those of simple thieno[3,4-b]pyrazines are provided in order to provide structure-function relationships within this series of compounds.     

New derivatives of imidazo [5, 1-b] benzothiazole

1-Cyano-3-phenylimidazo[5, 1-b]benzothiazole (II) has been obtained from 1-formyl -3-phenylimidazo[5, 1-b]benzothiazole (I) and from 1-brono-3-phenylimidazo[5, 1-b]benzothiazole (III) and has been converted into the corresponding amide (IV) and thioamide (V). New 1-alkyl-3-phenylimidazo[5, 1-b]benzothiazoles (VI) have been synthesized.     

From thiourea to bicyclic structures: an original route to imidazo[2,1-b]thiazoles, 5H-thiazolo[3,2-a]pyrimidines, 7H-imidazo[2,1-b][1,3]thiazines,and 2H,6H-pyrimido[2,1-b][1,3]thiazines

We report an example of an efficient regioselective synthesis of biheterocyclic compounds using thiourea as starting material. In fact, N,N'-bis(dimethylaminomethylene)thiourea (1), easily prepared by double condensation of N,N-dimethylformamide dimethyl acetal with thiourea, can be reacted with haloketones or acrylic dienophiles to give thiazolic (2) and thiazinic (3) diazadienes, respectively, themselves undergoing cyclization reactions to yield imidazo[2,1-b]thiazoles, 5H-thiazolo[3,2-a]pyrimidines, 7H-imidazo[2,1-b][1,3]thiazines, and 2H,6H-pyrimido[2,1-b][1,3]thiazines without any regioisomeric ambiguity. This straightforward route represents an original and unambiguously regioselective pathway to these valuable heterocycles.     

Reactions of some new thienothiophene derivatives

Facile and convenient syntheses of bisdimethylthieno[2,3-b]thiophen-2,5-diyl bis(oxazole-2-amine), bis(1H-imidazol-2-amine), bis((3a)-H-indole),[1,2-a]pyrimidine), bis(1H-imidazo[1,2-b][1,2,4]triazole) and bis(9H-benzo[d]imidazo[1,2-a]imidazole) derivatives incorporating a thieno[2,3-b]thiophene moiety from the versatile and readily accessible 1,1'(3,4-dimethylthieno[2,3-b]thiophene-2,5-diyl)-bis(2-bromo-ethanone) (1) are described.