A review on hybrid techniques for the degradation of organic pollutants in aqueous environment

The creation of the modern world requires many industrial sectors, however, sustainability needs to be considered while developing industries. In particular, organic pollutants generated by many of these industries contaminate the environment leading to health and other issues. Advanced oxidation processes (AOPs) have been introduced to remove organic pollutants present in wastewater. Sonolytic degradation of organic pollutants is considered as one of the AOPs, however, this process has its limitations. In order to overcome the limitations, hybrid techniques involving ultrasound and other AOPs have been developed. That is, ultrasound combined with heterogeneous AOPs (ultrasound/metal ions, ultrasound/metal oxides, and ultrasound/photocatalysis) and homogeneous AOPs (ultrasound/ozone, ultrasound/H₂O₂, and ultrasound/persulfate) for the degradation/mineralization of organic pollutants. This review highlights the advantages of using hybrid techniques involving ultrasound for the degradation of organic pollutants in aqueous solutions.     

Studies on the use of power ultrasound in leather dyeing

Uses of power ultrasound for acceleration/performing the chemical as well as physical processes are gaining importance. In conventional leather processing, the diffusion of chemicals through the pores of the skin/hide is achieved by the mechanical agitation caused by the paddle or drumming action. In this work, the use of power ultrasound in the dyeing of leather has been studied with the aim to improve the exhaustion of dye for a given processing time, to reduce the dyeing time and to improve the quality of dyed leather. The effect of power ultrasound in the dyeing of full chrome cow crust leather in a stationary condition is compared with dyeing in the absence of ultrasound as a control experiment both in a stationary as well as conventional drumming condition. An ultrasonic cleaner (150 W and 33 kHz) was used for the experiments. Actual power dissipated into the system was calculated from the calorimetric measurement. Experiments were carried out with variation in type of dye, amount of dye offer, temperature and time. The results show that there is a significant improvement in the percentage exhaustion of dye due to the presence of ultrasound, when compared to dyeing in absence of ultrasound. Experiments on equilibrium dye uptake carried out with or without ultrasound suggest that ultrasound help to improve the kinetics of leather dyeing. The results indicate that leathers dyed in presence of ultrasound have higher colour values, better dye penetration and fastness properties compared to control leathers. The physical testing results show that strength properties of the dyed leathers are not affected due to the application of ultrasound under the given process conditions. Apparent diffusion coefficient during the initial stage of dyeing process, both in presence and in absence of ultrasound was calculated. The values show that ultrasound helps in improving the apparent diffusion coefficient more for the difficult dyeing conditions such as in the case of metal-complex dyes having bigger aggregate size compared to less difficult dyeing conditions.     

Enhancement of ultrasonic cavitation yield by multi-frequency sonication

The paper reports the enhanced effect of multi-frequency ultrasonic irradiation on cavitation yield. The cavitation yield is characterized by electrical conductivity determination, fluorescence intensity determination and iodine release method. Two-frequency (28 kHz/0.87 MHz) orthogonal continuous ultrasound, two-frequency (28 kHz/0.87 MHz) orthogonal pulse ultrasound and three-frequency (28 kHz/1.0 MHz/1.87 MHz) orthogonal continuous ultrasound have been used. It has been found that the combined irradiation of two or more frequencies of ultrasound can produce a significant increase in cavitation yield compared with single frequency irradiation. The possible mechanisms of the enhanced effect are briefly discussed.     

Ultrasonic absorption frequency dependence of two widely used anti-cancer drugs: doxorubicin and daunorubicin

Low intensity ultrasound (approximately 10⁻⁶ W cm⁻²) in the frequency range 0.5–6.0 MHz was employed to investigate the ultrasound absorption properties of doxorubicin (DOX) at several temperatures. At physiological temperatures, we found enhanced ultrasound absorption from DOX, and its closely related analogue daunorubicin (DNR), in the upper kilohertz frequency range. The findings do not conform to classical theory of ultrasound absorption, thus suggesting an ultrasound coupling with the drug molecules via structural and/or chemical relaxation processes. The absorption spectra are analysed from the point of view of the non-classical theory of sound absorption due to physical and/or chemical relaxations. Only one spectral difference between the two anti-cancer agents is observed, around 2 MHz, and may be attributed to the sole difference in the chemical make-up of the side chain of the two antibiotics.     

基于声学扫描振镜的超声/光声双模态成像技术

超声/光声双模态成像技术因其同时兼具超声的高分辨率结构成像和光声的高对比度功能成像优势,极大地推动了光声成像技术的临床应用推广.传统超声/光声双模态成像技术多基于超声成像所用阵列探头同时收集光声信号,系统结构紧凑且无需图像配准,操作便捷.但该类设备使用阵列探头和多通道数据采集,使得其成本较高;且成像结果易受通道一致性差异影响.本文提出了一种基于声学扫描振镜的超声/光声双模态成像技术,该技术采用单个超声换能器结合一维声学扫描振镜进行快速声束扫描,实现超声/光声双模态成像,是一种小型化、低成本的双模态快速成像技术.本文开展了系列仿体和活体成像研究,实验结果表明:系统有效成像范围为15.6 mm,超声和光声成像B扫描速度分别为1.0 s^–1和0.1 s^–1 (光声成像速度主要受制于脉冲激光器重复频率).基于本文所提技术研究,有助于进一步推动超声/光声双模态成像技术的临床转化和普及;也为基于超声信号检测的多模态成像技术提供了一种低成本、小型化和快速声信号检测的参考方案.     

Experimental investigation of flow boiling heat transfer enhancement under ultrasound fields in a minichannel heat sink

Ultrasound is considered to be an effective active heat transfer enhancement method, which is widely used in various fields. But there is no clear understanding of flow boiling heat transfer characteristics in micro/mini-channels under ultrasonic field since the studies related are limited up to now. In this paper, a novel minichannel heat exchanger with two ultrasonic transducers inside the inlet and outlet plenum respectively is designed to experimentally investigate the impacts of ultrasound on flow boiling heat transfer enhancement in a minichannel heat sink. Flow visualization analyses reveal that ultrasound can promote rapid bubble motion, bubble detachment from heating wall surface and thereby new bubble generation, and decrease the length of confined bubble. Furthermore, the flow boiling experiments are initiated employing working fluid R141b at different ultrasonic parameters (e.g., frequency, power, angle of radiation) and heat flux under three types of ultrasound excitations: no ultrasound (NU), single inlet ultrasound (IU), inlet and outlet ultrasound (IOU). The results indicate that ultrasound has obvious augmentation effects on flow boiling heat transfer even though the intensification effects will be limited with the heat flux increases. The higher ultrasonic power, the lower ultrasonic frequency and the higher ultrasonic radiation angle, the better intensification efficiency. The maximum enhancement ratio of h_ave in the saturated boiling section reaches 1.88 at 50 W, 23 kHz and 45° under the experimental conditions. This study will be beneficial for future applications of ultrasound on flow boiling heat transfer in micro/mini-channels.     

Impact of ultrasound pretreatment on hydrolysate and digestion products of grape seed protein

The effects of ultrasound pretreatment with different working modes, including mono frequency ultrasound (MFU), simultaneous dual frequency ultrasound (SDFU) and alternate dual frequency ultrasound (ADFU) using energy-gather counter flow ultrasound equipment, on the degree of hydrolysis (DH) of grape seed protein (GSP) hydrolysate and IC₅₀ of GSP digestion products were studied. Amino acid composition analysis (AACA), ultraviolet–visible (UV) spectroscopy and atomic force microscopy (AFM) of GSP with different ultrasound pretreatments were measured. The results showed that MFU, SDFU and ADFU pretreatments improved the DH and reduced the IC₅₀ of GSP significantly (P < .05). The MFU of 20 kHz and SDFU of 20/40 kHz showed higher ACE inhibitory activity within the MFU and SDFU groups, respectively. ADFU of 20/35 kHz produced the highest ACE inhibitory activity among the three working modes (MFU, SDFU and ADFU). AACA showed that all the working modes of the ultrasound pretreatment could increase the amount of hydrophobic amino acids and the total amino acids. The changes in UV spectra and amino acid analysis indicated the unfolding of protein structure and exposure of more hydrophobic groups by SDFU and ADFU pretreatments. AFM analysis of the GSP indicated that the microstructures were destroyed and the particle size reduced after dual-frequency ultrasound pretreatments. Therefore, energy-gather counter flow ultrasound pretreatment is an effective method to improve the DH and reducing the IC₅₀ due to the changes of molecular conformation and effects on the microstructure by sonochemistry of GSP. In conclusion, it is necessary to select the frequency and working modes of ultrasound pretreatment for the preparation of ACE inhibitory peptide of GSP.     

Influence of sodium alginate pretreated by ultrasound on papain properties: Activity,structure, conformation and molecular weight and distribution

The aim of the study was to investigate the impact of sodium alginate (ALG) pretreated by ultrasound on the enzyme activity, structure, conformation and molecular weight and distribution of papain. ALG solutions were pretreated with ultrasound at varying power (0.05, 0.15, 0.25, 0.35, 0.45 W/cm²), 135 kHz, 50 °C for 20 min. The maximum relative activity of papain increased by 10.53% when mixed with ALG pretreated by ultrasound at 0.25 W/cm², compared with the untreated ALG. The influence of ultrasound pretreated ALG on the conformation and secondary structure of papain were assessed by fluorescence spectroscopy and circular dichroism spectroscopy. The fluorescence spectra revealed that ultrasound pretreated ALG increased the number of tryptophan on papain surface, especially at 0.25 W/cm². It indicated that ultrasound pretreatment induced molecular unfolding, causing the exposure of more hydrophobic groups and regions from inside to the outside of the papain molecules. Furthermore, ultrasound pretreated ALG resulted in minor changes in the secondary structure of the papain. The content of α-helix was slightly increased after ultrasound pretreatment and no significant change was observed at different ultrasound powers. ALG pretreated by ultrasound enhanced the stability of the secondary structure of papain, especially at 0.25 W/cm². The free sulfhydryl (SH) content of papain was slightly increased and then decreased with the increase of ultrasonic power. The maximum content of free SH was observed at 0.25 W/cm², under which the content of the free SH increased by 6.36% compared with the untreated ALG. Dynamic light scattering showed that the effect of ultrasound treatment was mainly the homogenization of the ALG particles in the mixed dispersion. The gel permeation chromatography coupled with the multi-angle laser light scattering photometer analysis showed that the molecular weight (M_w) of papain/ALG was decreased and then increased with the ultrasonic pretreatment. Results demonstrated that the activity of immobilized papain improved by ultrasonic pretreatment was mainly caused by the variation of the conformation of papain and the effect of interactions between papain and ALG. This study is important to explain the intermolecular interactions of biopolymers and the mechanism of enzyme immobilization treated by ultrasound in improving the enzymatic activity. As expected, ALG pretreated by appropriate ultrasound is promising as a bioactive compound carrier in the field of immobilized enzyme.     

The development and evaluation of ultrasound for the treatment of bacterial suspensions. A study of frequency,power and sonication time on cultured Bacillus species

Some species of bacteria produce colonies and spores which agglomerate in spherical clusters (Bacillus subtilis) and this serves as a protection for the organisms inside against biocidal attack. Flocs of fine particles e.g. clay can entrap bacteria which can also protect them against the biocides. It is because of problems such as these that alternative methods of disinfecting water are under active investigation. One such method is the use of power ultrasound, either alone or in combination with other methods. Ultrasound is able to inactivate bacteria and deagglomerate bacterial clusters or flocs through a number of physical, mechanical and chemical effects arising from acoustic cavitation. The aim of this study was to investigate the effect of power ultrasound at different powers and frequencies on Bacillus subtilis. Viable plate count techniques were used as a measure of microbial activity. Results showed a significant increase in percent kill for Bacillus species with increasing duration of exposure and intensity of ultrasound in the low-kilohertz range (20 and 38 kHz). Results obtained at two higher frequencies (512 and 850 kHz) indicated a significant increase in bacteria count suggesting declumping. In assessing the bacterial kill with time under different sonication regimes three types of behaviour were characterized:

• High power ultrasound (lower frequencies) in low volumes of bacterial suspension results in a continuous reduction in bacterial cell numbers i.e. the kill rate predominates.

• High power ultrasound (lower frequencies) in larger volumes results in an initial rise in cell numbers suggesting declumping of the bacteria but this initial rise then falls as the declumping finishes and the kill rate becomes more important.

• Low intensity ultrasound (higher frequencies) gives an initial rise in cell numbers as a result of declumping. The kill rate is low and so there is no significant subsequent decrease in bacterial cell numbers.

     

Elimination of standing wave effects in ultrasound radiation force excitation in air using random carrier frequency packets

The ultrasound radiation force has been used for noncontact excitation of devices ranging from microcantilevers to acoustic guitars. For ultrasound radiation force excitation, one challenge is formation of standing waves between the ultrasound transducer and the device under test. Standing waves result in constructive/destructive interference causing significant variations in the intensity of the ultrasound field. The standing-wave induced intensity variations in the radiation force can result from minor changes in the transducer position, carrier frequency, or changes in the speed of sound due to changes in ambient temperature. The current study demonstrates that by randomly varying the ultrasound carrier frequency in packets, it is possible to eliminate the negative consequences resulting from the formation of standing waves. A converging ultrasound transducer with a central frequency of 550 kHz was focused onto a brass cantilever. The 267 Hz resonance was excited with the ultrasound radiation force with a carrier frequency that randomly varied between 525 kHz to 575 kHz in packets of 10 cycles. Because each packet had a different carrier frequency, the amplitude of standing wave artifacts was reduced by a factor of 20 compared to a constant frequency excitation of 550 kHz.     

Method for comparing the efficiency of ultrasound irradiation independent of the shape and the volume of the reaction vessel in sonochemical experiments

The method described herein this review compares the efficiency of ultrasound irradiation in sonochemical experiments in organic solvents. This method was shown to be independent of the shape and volume of the reaction vessel.

The principle of this method is based on the fact that the concentration of dissolved oxygen in the entire reaction volume during acoustic cavitation depends on the ultrasound power or intensity of ultrasound field respectively. The concentration of dissolved oxygen is determined by the measurement of the fluorescence intensity with fluorescence probes.     

Measurement of microstructural changes promoted by ultrasound application on plant materials with different porosity

This research investigated the effects of ultrasound application (192 ± 6 W/L) on the microstructure of vegetables/fruits with different porosities, cell sizes and patterns (eggplants, beetroots, and apples), submitted to an immersion treatment in different liquids: distilled water, citric acid (1% w/v), and the vegetable/fruit juice, at 25 °C during 5 min. The ultrasound application did not significantly (p > 0.05) affect the size of the cells of the most porous material (eggplant) compared to the samples immersed without ultrasound assistance. The apple samples (with a middle-high porosity and the largest cells) were the most affected by ultrasound application. The median cell areas of samples treated with ultrasound in water and apple juice were 26 and 20% larger than those of samples treated without ultrasound, mainly because of cell wall disruption which caused the cells to merge into bigger clusters, but no effect was observed with the citric acid. Ultrasound application significantly (p < 0.05) increased the median cell area of the less porous raw matter (beetroot) only when the treatment was carried out in the vegetable juice (cells were 26% larger after treatment assisted with ultrasound than without it). Thus, the effects of ultrasound differ in materials with initially different characteristics.     

Effects of ultrasound-assisted enzyme hydrolysis on the microstructure and physicochemical properties of okara fibers

This work focuses on the effects of different ultrasound power densities on the microstructural changes and physicochemical properties of okara fibers, which are composed of carbohydrate-based polymers. Okara suspensions were treated with ultrasound at different power densities (0, 1, 2, 3, 4, and 5 W/mL) for 30 min, after which the ultrasound-treated okara were hydrolyzed by trypsin to obtain okara fibers. The ultrasound treatment of the okara fibers induced structural disorganization and changes, evidenced mainly in their morphological characteristics and their relative crystallinity degrees. Increasing the ultrasound power broke the okara fibers into flaky and stacked structures. When the ultrasound power density reached 4 W/mL, the parenchyma became compact and the hourglass structure fractured. The mean particle size of the okara fiber was reduced from 82.24 µm to 53.96 µm, and the homogeneity was enhanced significantly. The relative crystallinity of the okara fibers was reduced from 55.14% to 36.47%. The okara fiber surface charge decreased when the ultrasound power was increased. However, after ultrasound treatment at 4 W/mL (800 W), the okara fiber suspension exhibited the highest viscosity value and a higher swelling capacity, water-holding capacity, and oil-holding capacity. Therefore, the results indicated that the selection of processing conditions for okara fibers is critical and that okara fiber modification using a high ultrasound treatment might improve their use in potential applications.     

Estimation of hydroxyl free radicals produced by ultrasound in Fricke solution used as a chemical dosimeter

Hydroxyl free radicals produced in Fricke solution exposed to 80 kV X-rays or 23 kHz ultrasound (intensity 3 W cm⁻²) or 20 kHz ultrasound (intensity 18.9 W cm⁻²) or 3.5 MHz clinical ultrasound (intensity 1.47 W cm⁻²), as estimated from the Fricke dosimetric data, exhibited a linear dose-response relationship. The dosimeter was found to be effective in the concentration range 1.0–8.0 mM of FeSO₄ solution. The hydroxyl radicals produced in Fricke solution were inhibited by the OH radical scavengers dimethyl sulfoxide (200 mM), -histidine (10 mM) and sodium benzoate (10 mM) in a manner proportional to the rate constants of their reaction with the OH radicals. The power threshold for OH radical formation, which is presumably the threshold for cavity formation, was estimated for 23 kHz ultrasound by this dosimeter as 1.28 W cm⁻² for a 4 cm³ sample volume.     

激光激发水中产生超声波的实验研究

采用压电陶瓷水听器研究了Nd：YAG脉冲激光激发水中产生瞬态超声波的特性,给出了声压信号随距离的变化关系。研究结果表明：用激光产生水下声波是完全可行的。当观测点与光击穿区的距离r远大于柱体长度时,垂直于光传播方向的激光瞬态超声波幅值与r成反比;当观测点与光击穿区的距离r很小时,垂直于光传播方向的声压幅值与产成反比。此外,当激光入射角度发生变化,超声脉冲的幅值也随之发生变化,其幅值在激光束垂直入射的时候最大。     

Effects of ultrasound pretreatment with different frequencies and working modes on the enzymolysis and the structure characterization of rice protein

The effects of ultrasound pretreatment with different frequencies and working modes, including mono-frequency ultrasound (MFU), dual-frequency ultrasound (DFU) and tri-frequency ultrasound (TFU), on the degree of hydrolysis (DH) of rice protein (RP) and angiotensin-I-converting enzyme (ACE) inhibitory activity of RP hydrolysate were investigated. Ultraviolet–visible (UV) spectroscopy, fourier transform infrared (FTIR) spectroscopy, surface hydrophobicity and scanning electron microscopy (SEM) of RP pretreated with ultrasound were measured. The results showed that ultrasound pretreatment did not increase DH of RP significantly (p > 0.05). However, all the ultrasound pretreatment increased the ACE inhibitory activity of RP hydrolysate significantly (p < 0.05). The MFU of 20 kHz showed higher ACE inhibitory activity compared to that of other MFU. The ACE inhibitory activity of sequential DFU was higher than that of simultaneous with the same frequency combination. Sequential TFU of 20/35/50 kHz produced the highest increase in ACE inhibitory activity in contrast with other ultrasound frequencies and working modes. All the results under ultrasound pretreatment showed that ultrasound frequencies and working modes were of great effect on the ACE inhibitory activity of RP. The changes in UV–Vis spectra and surface hydrophobicity indicated the unfolding of protein and exposure of hydrophobic groups by ultrasound. The FTIR analysis showed that all the ultrasound pretreatment with different frequencies and working modes decreased α-helix, β-turn content and increased β-sheet, random coil content of RP. The SEM results indicated that ultrasound pretreatment resulted in the deformation of RP. In conclusion, the frequency selection of ultrasound pretreatment of RP is essential for the preparation of ACE inhibitory peptide.     

Sonodynamic therapy--a review of the synergistic effects of drugs and ultrasound

Sonodynamic therapy, the ultrasound dependent enhancement of cytotoxic activities of certain compounds (sonosensitizers) in studies with cells in vitro and in tumor bearing animals, is reviewed. The attractive features of this modality for cancer treatment emerges from the ability to focus the ultrasound energy on malignancy sites buried deep in tissues and to locally activate a preloaded sonosensitizer. Possible mechanisms of sonodynamic therapy include generation of sonosensitizer derived radicals which initiate chain peroxidation of membrane lipids via peroxyl and/or alkoxyl radicals, the physical destabilization of the cell membrane by the sonosensitizer thereby rendering the cell more susceptible to shear forces or ultrasound enhanced drug transport across the cell membrane (sonoporation). Evidence against the role of singlet oxygen in sonodynamic therapy is discussed. The mechanism of sonodynamic therapy is probably not governed by a universal mechanism, but may be influenced by multiple factors including the nature of the biological model, the sonosensitizer and the ultrasound parameters. The current review emphasizes the effect of ultrasound induced free radicals in sonodynamic therapy.     

Ultrasound-assisted removal of malachite green from aqueous solution by dead pine needles

The dead needles of Aleppo pine (Pinus halepensis) were tested as a possible sorbent for the removal of malachite green from aqueous solutions in the absence and presence of ultrasound. Batch process was employed for sorption kinetic and equilibrium studies. Sorption experiments indicated that the sorption capacity was dependent of operating variables. Both the rate and the amount of malachite green sorption are markedly increased in the presence of the ultrasonic field. The dye removal with the assistance of ultrasound was enhanced with the increase of sorbate initial concentration and temperature, and with the decrease of sorbent dosage and ionic strength. The combination of stirring and ultrasound leads to an improvement of the removal of dye. The sorption kinetics was controlled by the intraparticle diffusion. The intraparticle diffusion coefficient increased 1.7 times in the presence of ultrasound and up to 3.6 times in the combined process. The sorption capacity, estimated according to the Freundlich model, indicates that ultrasound enhanced the sorption properties of the sorbent. The effect of ultrasound on the improvement of dye sorption is due to a variety of physical and mechanical effects as well as to thermal properties. The combination of ultrasound and stirring for the sorption process was shown to be of interest for the treatment of wastewaters contaminated with malachite green.     

Improvement of leaching process of Geniposide with ultrasound

The effect of ultrasound on the leaching process, in which Geniposide is leached from the Gardenia fruit by deionized water at 20 degrees C, was investigated. The phase equilibrium and the dynamics were measured at static, stirring, and ultrasonically assisted conditions, respectively. The experimental results show that the extraction yield of Geniposide with ultrasound at 0.1533 W cm(-2), is increased by 16.5%, in comparison with that without ultrasound when the ratio of the solvent volume to the fruit weight is 40 ml/g. A model for mass transfer, based on the intraparticle diffusion and the external mass transfer, was developed. And the dynamic curves calculated by the model are in a good agreement with the experimental data. The external mass transfer coefficient k(f)/R and intraparticle diffusion coefficient D(e)/R2 were obtained by fitting of the experiment data. The external mass transfer coefficient with ultrasound at 0.1533 W cm(-2) is 1.63 times higher than that in static process, and the intraparticle diffusion coefficient with ultrasound at 0.1533 W cm(-2) is 3.25 times higher than that in static process.     

三种肿瘤细胞对超声结合血卟啉敏感性的实验研究

实验采用频率为1．6MHz，强度为1W／cm^2、3W／cm^2、5W／cm^2、7W／cm^2的聚焦超声结合血卟啉分别对腹水型小鼠S180细胞（Sarcomal80，S180）、艾氏腹水瘤细胞（Ehrlich Ascites Tumor，EAT）及H-22肝癌细胞进行杀伤效应研究，利用台盼蓝拒染法检测处理后细胞存活率的变化。实验结果表明，不同类型的细胞对超声结合血卟啉的敏感性不同，声照条件相同时，三种细胞对1．6MHz频率超声的敏感性依次为：S18〉EAT〉H-22，且对超声结合血卟啉敏感性明显大于单纯超声。无论是单纯超声组还是超声结合血卟啉组，三种细胞的存活率均随超声强度的增加而下降。