基于(R)-1,1’-联萘硫脲的手性荧光受体: 合成与手性识别

Two chiral fluorescent receptors 1 and 2 based on (R)-1,1‘-binaphthylene-2,2‘-bisthiourea were synthesized, and their chiral recognition properties for enantiomeric mandelate anions were studied by fluorescence spectra and molecular modeling. Addition of the L- and D-mandelate anions caused considerable fluorescent increases in the fluorescent intensity of the host solution. The L-enantiomer can enhance the fluorescence intensity of 1 much more than the D-enantiomer can do, and 1 shows a better enantioselective recognition ability than 2.     

Synthesis and Silica‐Based Immobilization of Monofunctionalized Heptakis(2,6‐di‐O‐methyl‐3‐O‐pentyl)‐β‐cyclodextrin for Enantioselective Capillary‐HPLC

Heptakis(2,6‐di‐O‐methyl‐3‐O‐pentyl)‐β‐cyclodextrin was monofunctionalized by the regioselective introduction of exactly one ω‐epoxyoctyl group at the primary site of the cyclodextrin. The site‐specifically substituted cyclodextrin was immobilized to commercially available aminopropyl silica by nucleophilic opening of the epoxy function of the spacer substituent resulting in a lipophilic chiral stationary phase with broad applicability for enantiomer separations in capillary‐HPLC under reversed‐phase conditions.     

Helix‐sense‐selective copolymerization of triphenylmethyl methacrylate with chiral 2‐isopropenyl‐4‐phenyl‐2‐oxazoline

The asymmetric induction leading to a one‐handed helix was investigated in the anionic and radical copolymerization of triphenylmethyl methacrylate (TrMA) and (S)‐2‐isopropenyl‐4‐phenyl‐2‐oxazoline ((S)‐IPO), and highly isotactic copolymers with a reasonable optical activity were obtained. In the anionic copolymerization, the optical activity of the obtained copolymers depended on the polarity of solvents, and a highly optically active copolymer was produced in the copolymerization in toluene. The chiral oxazoline monomer functioned not only as a comonomer but also as a chiral ligand to endow the polymer with large negative optical rotation in the copolymerization with TrMA. The copolymers with small positive optical rotation were obtained in THF, indicating that IPO unit may work only as the chiral monomer that dictates the helical sense via copolymerization with TrMA. The isotacticity of the obtained copolymers depended on the contents of TrMA units in the copolymers, but was almost independent of the solvent for copolymerization. In the radical copolymerization, the obtained copolymers exhibited small optical activities. It seemed that the chiral monomer cannot induce one‐handed helical structure of TrMA sequences even if the sequences probably have a high isotacticity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 441–447     

Asymmetric anionic polymerizations of 7‐cyano‐7‐alkoxycarbonyl‐1,4‐benzoquinone methides

Asymmetric anionic polymerizations of 7‐cyano‐7‐alkoxycarbonyl‐1,4‐benzoquinone methides ( 1 ) with various alkoxy groups were performed using chiral initiators such as lithium isopropylphenoxide (ⁱPrPhOLi)/(S)‐(–)‐2,2′‐isopropylidene‐bis(4‐phenyl‐2‐oxazoline) ((–)‐PhBox) and lithium isopropylphenoxide (ⁱPrPhOLi)/(–)‐sparteine ((–)‐Sp) to investigate the effect of the alkoxy groups of alkoxycarbonyl substituent in the monomers 1 and chiral ligands of chiral initiators on the control of chiral center in the formation of polymers. Molar optical rotation values of the polymers were significantly dependent upon alkoxy groups, and the polymers with higher molar optical rotation were obtained in monomers with primary alkoxy groups. The asymmetric anionic oligomerizations of the quinone methides having methoxy( 1a ), ethoxy( 1b ), and n‐propoxy( 1c ) groups with chiral initiators were carried out. Both 1‐mers and 2‐mers were isolated and their optical resolutions were performed to determine the extent of stereocontrol. High stereoselectivity was observed at the propagation reaction, but not at the initiation reaction. The effect of the counterion on the control of chiral center in the formation of the polymer was investigated in the asymmetric anionic polymerizations of 1b with ⁱPrPhOM(M = Li, Na, K)/(–)‐Sp and ⁱPrPhOM(M = Li, Na, K)/(–)‐PhBox initiators and discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A photo‐degradable helix: Synthesis,structure, and photolysis of optically active poly[2,7‐bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate]

2,7‐Bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate ( BBPMFA ) was synthesized and polymerized using α,α′‐azobisisobutyronitrile or n‐Bu₃B‐air as a radical initiator and using the complex of 9‐fluorenyllithium with (S)‐(+)‐1‐(2‐pyrrolidinylmethyl)pyrrolidine as an optically active anionic initiator. Although the radical polymerization led to rather low‐molecular‐weight products at low yields, the anionic polymerization afforded polymers with higher molecular weights in higher yields. The poly( BBPMFA ) obtained by the anionic polymerization was slightly rich in isotacticity (meso diad 57%) and showed an intense circular dichroism (CD) spectrum and large dextrorotation. The intensity of the CD spectrum and magnitude of optical activity increased with an increase in M_n, suggesting that the polymer possesses a preferred‐handed helical conformation. The CD spectrum disappeared within 1 s on irradiation to the polymer in a CHCl₃ solution using a 500‐W Hg‐Xe lamp. This was ascribed to fast photolysis of the ester linkage leading to a loss of helical conformation of the entire chain. Photolysis products of poly( BBPMFA ) were poly(acrylic acid) and 2,7‐bis(4‐t‐butylphenyl)‐9‐methylenefluorene (2,7‐bis(4‐t‐butylphenyl)dibenzofulvene). The photolysis reaction seemed to proceed through the “unzipping” mechanism. The rate constant of photolysis of poly( BBPMFA ) under irradiation at monochromated 325 nm was around 0.01 s^?1 independent of molecular weight. Photolysis at 325 nm was approximately 2400 times faster than that for chemical ester solvolysis under a neutral condition in the dark. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chiral recognition in molecular and macromolecular pairs of (S)‐ and (R)‐1‐cyano‐2‐methylpropyl‐4′‐ {[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐4‐ carboxylate enantiomers

(S)‐1‐Cyano‐2‐methylpropyl‐4′‐{[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐ 4‐carboxylate [ (S)‐11 ] and (R)‐1‐cyano‐2‐methylpropyl‐4′‐{[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐4‐carboxylate [( R)‐11 ] enantiomers, both greater than 99% enantiomeric excess, and their corresponding homopolymers, poly[ (S)‐11 ] and poly[ (R)‐11 ], with well‐defined molecular weights and narrow molecular weight distributions were synthesized and characterized. The mesomorphic behaviors of (S)‐11 and poly[ (S)‐11 ] are identical to those of (R)‐11 and poly[ (R)‐11 ], respectively. Both (S)‐11 and (R)‐11 exhibit enantiotropic S_A, S, and S_X (unidentified smectic) phases. The corresponding homopolymers exhibit S_A and S phases. The homopolymers with a degree of polymerization (DP) less than 6 also show a crystalline phase, whereas those with a DP greater than 10 exhibit a second S_X phase. Phase diagrams were investigated for four different pairs of enantiomers, (S)‐11 /( R)‐11 , (S)‐11 /poly[ (R)‐11 ], and poly[ (S)‐11 ]/poly[ (R)‐11 ], with similar and dissimilar molecular weights. In all cases, the structural units derived from the enantiomeric components are miscible and, therefore, isomorphic in the S_A and S phases over the entire range of enantiomeric composition. Chiral molecular recognition was observed in the S_A and S_X phases of the monomers but not in the S_A phase of the polymers. In addition, a very unusual chiral molecular recognition effect was detected in the S phase of the monomers below their crystallization temperature and in the S phase of the polymers below their glass‐transition temperature. In the S phase of the monomers above the melting temperature and of the polymers above the glass‐transition temperature, nonideal solution behavior was observed. However, in the S_A phase the monomer–polymer and polymer–polymer mixtures behave as an ideal solution. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3631–3655, 2000     

Synthesis and asymmetric anionic polymerization of substituted 7‐aryl‐2,6‐dimethyl‐1,4‐benzoquinone methides

Substituted 7‐aryl‐2,6‐dimethyl‐1,4‐benzoquinone methides which have an electron‐donating methoxy substituent at the para‐position (p‐OMe, 2a ) or an electron‐withdrawing chloro one at the para‐ (p‐Cl, 2b ), meta‐ (m‐Cl, 2c ) , and ortho‐positions (o‐Cl, 2d ) of the benzene ring were synthesized, and their asymmetric anionic polymerizations using the complex of lithium 4‐isopropylphenoxide with (?)‐sparteine were carried out in toluene at 0 °C. The polymers with negative specific rotation were obtained for all of four monomers, and the polymer obtained from 2a showed smaller specific rotation value than that of polymer having no substituent (p‐H, 1 ) on the phenyl group and the polymers obtained from 2b–d showed larger ones. It was found that the kind of a substituent and its substitution position on the phenyl group affect significantly the optical activity of polymers. The largest specific rotation value of [α]₄₃₅= ?153.2° was obtained in the polymerization of 2d with an ortho‐chloro substituent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 437–444     

Gold‐Catalyzed Atroposelective Synthesis of 1,1′‐Binaphthalene‐2,3′‐diols

A highly atroposelective (up to 97 % ee) Au‐catalyzed synthesis of 1,1′‐binaphthalene‐2,3′‐diols is reported starting from a range of substituted benzyl alkynones. Essential for the achievement of high enantioselectivity during the key assembly of the naphto‐3‐ol unit is the use of TADDOL‐derived α‐cationic phosphonites as ancillary ligands. Preliminary results demonstrate that the transformation of the obtained binaphthyls into axially chiral monodentate phosphines is possible without degradation of enantiopurity.     

Crystallographic report: [N,N′‐Bis‐(6‐methylpyrid‐2‐ylium)‐(1R,2R)‐1,2‐diaminocyclohexane] bis‐[(p‐cymene)‐ trichlororuthenate(II)]

The chiral compound (H₂cydiampy)[RuCl₃(p‐cymene)]₂ has been obtained in high yield by treating [RuCl₂(p‐cymene)]₂ with an excess of hydrochloric acid in the presence of one equivalent of N,N′‐bis‐(6‐methylpyrid‐2‐yl)‐(1R,2R)‐1,2‐diaminocyclohexane (cydiampy). It crystallizes in the chiral tetragonal space group P4₃2₁2, with half of the atoms of the dication related to the other half by a crystallographic C₂ axis that also makes equivalent the two anionic metal moieties. Copyright © 2005 John Wiley & Sons, Ltd.     

A High－efficiency Preparation, Properties and Structure of （R, S ）－and （ S, S）－Pyrrolidine－2－carboxylic Acid 3,5－Dioxa－4－boracvclo.hepta [ 2,1－α; 3,4－α′] dinaphthalen－4－yl Esters

A highly-efficient preparative procedure for ( R, S )- and ( S, S)-pyrroHdine-2-carboxyHc acid 3,5-dioxa-4-boracyclohepta[2, 1-α ; 3,4-α′] dlnaphthalen-4-yl esters [ namely ( R, S )-BNBAP and (S, S )-BNBAP] is described and the crystal structure of (R, S )-BNBAP was obtained. The data indicate that ( R, S )-BNBAP is a spirocyclic inner borate salt with almost normal te-trahedral configuration. This structural form may be the basic reason for their high chemical, optical and thermodynamic sta-bility.     

Pseudoephedrine‐Directed Asymmetric α‐Arylation of α‐Amino Acid Derivatives

Available α‐amino acids undergo arylation at their α position in an enantioselective manner on treatment with base of N′‐aryl urea derivatives ligated to pseudoephedrine as a chiral auxiliary. In situ silylation and enolization induces diastereoselective migration of the N′‐aryl group to the α position of the amino acid, followed by ring closure to a hydantoin with concomitant explulsion of the recyclable auxiliary. The hydrolysis of the hydantoin products provides derivatives of quaternary amino acids. The arylation avoids the use of heavy‐metal additives, and is successful with a range of amino acids and with aryl rings of varying electronic character.     

Practical Synthesis of (20S)‐10‐(3‐Aminopropyloxy)‐7‐ethylcamptothecin,a Water‐Soluble Analogue of Camptothecin

A robust, practical synthesis of (20S)‐10‐(3‐aminopropyloxy)‐7‐ethylcamptothecin (T‐2513, 5 ), which is a water‐soluble analogue of camptothecin, has been developed. The key step in this synthesis is a highly diastereoselective ethylation at the C20 position by using N‐arylsulfonyl‐(R)‐1,2,3,4‐tetrahydroisoquinoline‐3‐carboxylic acid ester as a chiral auxiliary, which affords the key intermediate ethyl‐(S)‐2‐acyloxy‐2‐(6‐cyano‐5‐oxo‐1,2,3,5‐tetrahydroindolizin‐7‐yl)butanoate ( 8 k ) in 93 % yield and 87 % de. Optically pure compound 8 k was obtained by a single recrystallization from acetone and its further elaboration through Friedlander condensation afforded compound 5 . This synthesis does not require any chromatographic purification steps and can provide compound 5 on a multi‐gram scale in 6.3 % overall yield (16 steps).     

Optimization of the HPLC enantioseparation of 3,3′‐dibromo‐5,5′‐disubstituted‐4,4′‐bipyridines using immobilized polysaccharide‐based chiral stationary phases

The HPLC enantioseparation of nine atropisomeric 3,3′,5,5′‐tetrasubstituted‐4,4′‐bipyridines was performed in normal and polar organic (PO) phase modes using two immobilized polysaccharide‐based chiral columns, namely, Chiralpak IA and Chiralpak IC. The separation of all racemic analytes, the effect of the chiral selector, and mobile phase (MP) composition on enantioseparation and the enantiomer elution order (EEO) were studied. The beneficial effect of nonstandard solvents, such as tetrahydrofuran (THF), dichloromethane (DCM), and methyl t‐butyl ether on enantioseparation was investigated. All selected 4,4′‐bipyridines were successfully enantioseparated on Chiralpak IA under normal or PO MPs with separation factors from 1.14 to 1.70 and resolutions from 1.3 to 6.5. Two bipyridines were enantioseparated at the multimilligram level on Chiralpak IA. Differently, Chiralpak IC was less versatile toward the considered class of compounds and only five bipyridines out of nine could be efficiently separated. In particular, on these columns, the ternary mixture n‐heptane/THF/DCM (90:5:5) as MP had a positive effect on enantioseparation. An interesting phenomenon of reversal of the EEO depending on the composition of the MP for the 3,3′‐dibromo‐5,5′‐bis‐(E)‐phenylethenyl‐4,4′‐bipyridine along with an exceptional enantioseparation for the 3,3′‐dibromo‐5,5′‐bis‐ferrocenylethynyl‐4,4′‐bipyridine (α = 8.33, R_s = 30.6) were observed on Chiralpak IC.     

Chiral polyamides consisting of N‐α‐benzoyl‐L‐glutamic acid as a diacid component

Novel polyamide with chiral environment was obtained from aromatic diamine, 4,4′‐diaminodiphenylmethane (DADPM), and N‐α‐protected L ‐glutamic acid, N‐α‐benzoyl‐L ‐glutamic acid (Benzoyl‐L ‐Glu‐OH). The optical rotation ([α]_D ) of the polyamide was determined to be 3.6° (c = 1.00 g/dL in DMF), implying that the optically active polyamide was obtained. The present polyamide gave a durable self‐standing membrane. The membrane selectively incorporated the D ‐isomer of Ac‐Trp from racemic mixture of Ac‐Trp. The adsorption selectivity toward Ac‐D ‐Trp was determined to be 1.95. It showed chiral separation ability by adopting potential difference as a driving force for membrane transport. The permselectivity was dependent on the potential difference, and at the applied potential difference of 3.0 V, the membrane selectively transported Ac‐D ‐Trp and the permselectivity toward Ac‐D ‐Trp was determined to be 1.84, which was close to the adsorption selectivity of 1.95. Contrary to this, the membrane showed opposite permselectivity at the applied potential difference of 2.0 V and the permselectivity toward the L ‐isomer reached 2.48. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2530–2538, 2009     

Enantioselective NH Insertion Reaction of α‐Aryl α‐Diazoketones: An Efficient Route to Chiral α‐Aminoketones

A highly enantioselective N? H insertion reaction of α‐diazoketones was developed by using cooperative catalysis by dirhodium(II) carboxylates and chiral spiro phosphoric acids. The insertion reaction provides a new access route to diverse chiral α‐aminoketones, which are versatile building blocks in organic synthesis, with fast reaction rates, good yields and high enantioselectivity under mild and neutral conditions.     

HPLC法拆分(-)-2(S)-苄基-4-酮-4-(顺式-全氢化异吲哚-2-基)丁酸钙对映体

目的：建立刺激胰岛素分泌的新型降糖药物(-)-2 (S)-苄基-4-酮-4-(顺式-全氢化异吲哚-2-基)丁酸钙对映体的HPLC拆分方法。方法：采用Sumichiral OA-3300手性柱(250 × 4.6 mm I.D., 5 μm), 柱温35℃,以0.05 mol·L-1醋酸铵的甲醇溶液为流动相,检测波长为210 nm。结果：本品两对映体在22分钟内实现良好分离,分离度达3以上,S－异构体分别在0.028 ~ 5.6 μg mL-1和0.03 ~ 6.0 μg mL-1范围内线性关系良好,回归方程分别为：Y=1.32×103x-2.54 (r=0.9997)和Y=1.15×103x-1.78 (r=0.9998),最低检测限分别为0.15 ng和0.10 ng,方法精密度RSD低于1.0% (n=5)。结论：建立的对映体分离方法可用于本品光学异构体的质量控制。     

Alternated π‐conjugated polymers based on a 1,2‐diiminocyclohexane chiral unit for nitroaromatics sensing

The detection of 2,4‐dinitrotoluene (DNT) by fluorescence quenching of a new class of polyimines consisting in π‐conjugated segments regularly alternated with chiral C₂ symmetry units has been studied for solutions and thin films. Their photophysical properties and their sensitivity towards DNT detection has been compared to those of a small model molecule incorporating the same π‐conjugated segment. In solution, all the compounds exhibit the same photo‐physical properties and sensitivity towards DNT detection. In contrast, for thin films, better performances are observed in static conditions for this new class of polyimines compared to the small model molecule. It seems that C₂ symmetry units prevent from the stacking of the π‐conjugated segments and provide in addition to high fluorescence signal an improved diffusion of the analyte inside the films. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4141–4149, 2009     

Efficient preparative separation of 6‐(4‐aminophenyl)‐5‐methyl‐4, 5‐dihydro‐3(2H)‐pyridazinone enantiomers on polysaccharide‐based stationary phases in polar organic solvent chromatography and supercritical fluid chromatography

6‐(4‐Aminophenyl)‐5‐methyl‐4,5‐dihydro‐3(2H)‐pyridazinone is a key synthetic intermediate for cardiotonic agent levosimendan. Very few studies address the use of chiral stationary phases in chromatography for the enantioseparation of this intermediate. This study presents two efficient preparative methods for the isolation of (R)(?)‐6‐(4‐aminophenyl)‐5‐methyl‐4,5‐dihydro‐3(2H)‐pyridazinone in polar organic solvent chromatography and supercritical fluid chromatography using polysaccharide‐based chiral stationary phases and volatile organic mobile phases without additives in isocratic mode. Under optimum conditions, Chiralcel OJ column showed the best performance (α = 1.71, Rs = 5.47) in polar organic solvent chromatography, while Chiralpak AS column exhibited remarkable separations (α = 1.81 and Rs = 6.51) in supercritical fluid chromatography with an opposite enantiomer elution order. Considering the sample solubility, runtime and solvent cost, the preparations were carried out on Chiralcel OJ column and Chiralpak AS column (250 × 20 mm i.d.; 10 µm) in polar organic mode and supercritical fluid chromatography mode with methanol and CO₂/methanol as mobile phases, respectively. By utilizing the advantages of chromatographic techniques and polysaccharide‐based chiral stationary phases, this work provides two methods for the fast and economic preparation of (R)(?)‐6‐(4‐aminophenyl)‐5‐methyl‐4,5‐dihydro‐3(2H)‐pyridazinone, which are suitable for the pharmaceutical industry.