Optical resolution of racemic amino acid derivatives with molecularly imprinted membranes bearing oligopeptide tweezers

Molecularly imprinted polymeric membranes were prepared from various oligopeptide tweezers by the adoption of N‐α‐tert‐butoxycarbonyl‐D ‐tryptophan (Boc‐D ‐Trp) or N‐α‐tert‐butoxycarbonyl‐L ‐tryptophan (Boc‐L ‐Trp) as a print molecule. The chiral recognition ability of the formed molecular recognition sites was dependent on the absolute configuration of the print molecule adopted in the membrane preparation (molecular imprinting) process, whereas the candidate oligopeptide tweezers consisted of the L ‐amino acid residues. In other words, the membranes imprinted by the D ‐isomer recognized the D ‐isomer in preference to the corresponding L ‐isomer, and vice versa. The affinity constant between the target molecule and the chiral recognition site from the oligopeptide tweezers was higher than that from a single‐strand oligopeptide derivative. Those membranes selectively transported the enantiomer, which was preferentially incorporated into the membrane by dialysis. The permselectivities for these membranes exceeded their adsorption selectivities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 385–396, 2005     

Chiral Recognition Sites Converted from Tetrapeptide Derivatives Adopting Racemates as Print Molecules

Molecularly imprinted polymeric membranes were prepared from polystyrene resin bearing tetrapeptide derivatives H‐Asp(OcHex)‐Leu‐Asp(OcHex)‐Glu(OBzl)‐OCH₂‐ (DLDE) consisting of D ‐amino acid residues or L ‐amino acid residues. The tetrapeptide derivatives were converted into chiral recognition sites by using not only an optically pure Boc‐Trp but also racemic Boc‐Trps as a print molecule. The chiral recognition ability depends on the combination of the absolute configuration of the print molecule and that of constituting amino acid residues. The membrane prepared from a DLDE derivative consisting of D ‐amino acid residues and imprinted by Boc‐D ‐Trp recognized the D ‐isomer in preference to the corresponding L ‐isomer and vice versa. In the present study, it was also made clear that racemic print molecules were effective in generating chiral recognition sites. The affinity constant of the generated chiral recognition site was determined to be 9.6 × 10³ mol^?1 · dm³, which was independent of the molecular imprinting conditions. Enantioselective permeation was attained by applying electrodialysis. An optimum permselectivity of 5.9, which corresponds to the adsorption selectivity, was attained.

Summary of the molecularly imprinted polymeric membranes studied.     

Synthesis and chiral recognition properties of poly(N‐propargylamide) gels derived from ornithine and lysine

Copolymerization of ornithine‐ and lysine‐derived N‐propargylamides, N‐α‐tert‐butoxycarbonyl‐N‐δ‐fluorenylmethoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 1 ), N‐α‐tert‐butoxycarbonyl‐N‐ε‐fluorenylmethoxycarbonyl‐L ‐lysine N′‐propargylamide ( 2 ), N‐α‐fluorenylmethoxycarbonyl‐N‐δ‐tert‐butoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 3 ), and N‐α‐fluorenylmethoxycarbonyl‐N‐ε‐tert‐butoxycarbonyl‐L ‐lysine N′‐propargylamide (4) with dipropargyl adipate was carried out using (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] as a catalyst in THF to obtain polymer gels in 80–93% yields. The gels adsorbed N‐benzyloxycarbonyl L ‐alanine, N‐benzyloxycarbonyl L ‐alanine methyl ester, and (S)‐(+)‐1‐phenyl‐1,2‐ethanediol preferably than the corresponding optical isomers. The order of chiral discrimination was poly( 1 ) > poly( 4 ) > poly( 2 ), poly( 3 ) gels. The fluorenylmethoxycarbonyl groups of the gels could be partly removed by piperidine treatment, leading to increase of adsorptivity but decrease of chiral recognition ability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4175–4182, 2008     

Stereocontrolled Synthesis of syn‐β‐Hydroxy‐α‐Amino Acids by Direct Aldolization of Pseudoephenamine Glycinamide

β‐Hydroxy‐α‐amino acids figure prominently as chiral building blocks in chemical synthesis and serve as precursors to numerous important medicines. Reported herein is a method for the synthesis of β‐hydroxy‐α‐amino acid derivatives by aldolization of pseudoephenamine glycinamide, which can be prepared from pseudoephenamine in a one‐flask protocol. Enolization of (R,R)‐ or (S,S)‐pseudoephenamine glycinamide with lithium hexamethyldisilazide in the presence of LiCl followed by addition of an aldehyde or ketone substrate affords aldol addition products that are stereochemically homologous with L ‐ or D ‐threonine, respectively. These products, which are typically solids, can be obtained in stereoisomerically pure form in yields of 55–98 %, and are readily transformed into β‐hydroxy‐α‐amino acids by mild hydrolysis or into 2‐amino‐1,3‐diols by reduction with sodium borohydride. This new chemistry greatly facilitates the construction of novel antibiotics of several different classes.     

Investigation on thermoresponsive behavior of biodegradable poly(γ‐glutamic acid)‐graft‐L‐phenylalanine ethyl ester

The thermosensitivity of biodegradable and non‐toxic amphiphilic polymer derived from a naturally occurring polypeptide and a derivative of amino acid was first reported. The amphiphilic polymer consisted of poly(γ‐glutamic acid) (γ‐PGA) as a hydrophilic backbone, and L ‐phenylalanine ethyl ester (L ‐PAE) as a hydrophobic branch. Poly(γ‐glutamic acid)‐graft‐L ‐phenylalanine (γ‐PGA‐graft‐L ‐PAE) with grafting degrees of 7–49% were prepared by varying the content of a water‐soluble carbodiimide (WSC). γ‐PGA‐graft‐L ‐PAE with a grafting degree of 49% exhibited thermoresponsive phase transition behavior in an aqueous solution at around 80°C. The copolymers with grafting degrees in the range of 30–49% showed thermoresponsive properties in NaCl solution. A clouding temperature (T_cloud) could be adjusted by changing the polymer concentration and/or NaCl concentration. The thermoresponsive behavior was reversible. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of chiral amino acid materials and the study of their interactions with 1,1‐Bi‐2‐naphthol

The amino acid tryptophan has been converted into acrylamide monomers using L /D ‐tryptophan methyl ester forming the enantiopure chiral monomers. Attempts were made to polymerize these monomers via reversible addition fragmentation chain transfer (RAFT) polymerization to form poly(tryptophan). Unfortunately, this proved difficult, and instead, a postpolymerization modification route was used by first synthesizing poly(pentafluorophenyl acrylate) via RAFT, which was then substituted with L ‐tryptophan methyl ester to give poly(L ‐tryptophan). The interactions of the newly synthesized tryptophan monomers, as well as previously reported phenylalanine monomers, were studied in the presence of rac‐BINOL. It has been shown that the enantiomers of tryptophan have a stronger interaction with BINOL than phenylalanine and this has been attributed to the larger π system on the side chain. By monitoring the shifts and splitting of the phenolic protons of BINOL, it has been observed that S‐BINOL interacts more favorably with L ‐monomer enantiomers and R‐BINOL with D ‐monomer enantiomers. Similar interactions have also been seen with poly(phenylalanine) and the newly synthesized poly(tryptophan) materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d‐maltosyl‐β‐cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin were synthesized using functionalized silica as a matrix, 4‐(phenyldiazenyl)phenol as a light‐sensitive monomer, and 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4‐(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin, indicating that imprinted polymers could be used to isolate 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin from a conversion mixture containing β‐cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin.     

Pendant structure governed anion sensing property for sulfonamide‐functionalized poly(phenylacetylene)s bearing various α‐amino acids

The colorimetric detection of anionic species has been studied for α‐amino acid‐conjugated poly(phenylacetylene)s, which were prepared by the polymerization of the ethyl esters of N‐(4‐ethynylphenylsulfonyl)‐L ‐alanine, L ‐isoleucine, L ‐valine, L ‐phenylalanine, L ‐aspartic acid, and L ‐glutamic acid using Rh⁺(2,5‐norbornadiene)[(η⁶‐C₆H₅)B^?(C₆H₅)₃] as the catalyst in CHCl₃. The one‐handed helical conformations of all the sulfonamide‐functionalized polymers were characterized by Cotton effects in the circular dichroism spectra. The addition of anions with a relatively high basicity, such as tetra‐n‐butylammonium acetate and fluoride, induced drastic changes in both the optical and chiroptical properties. On the other hand, anions with a relatively low basicity, such as tetra‐n‐butylammonium nitrate, azide, and bromide, had essentially no effects on the helical conformation of all the sulfonamide‐functionalized polymers. The anion signaling property of the sulfonamide‐functionalized polymers possessing α‐amino acid moieties was significantly affected by the installed residual amino acid structures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1683–1689, 2010     

Synthesis and characterization of L‐leucine containing chiral vinyl monomer and its polymer,poly(2‐(methacryloyloxyamino)‐4‐methyl pentanoic acid)

A chiral monomer containing L ‐leucine as a pendant group was synthesized from methacryloyl chloride and L ‐leucine in presence of sodium hydroxide at 4 °C. The monomer was polymerized by free radical polymerization in propan‐2‐ol at 60 °C using 2,2′‐azobis isobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The polymer, poly(2‐(Methacryloyloxyamino)‐4‐methyl pentanoic acid) is thus obtained. The molecular weight of the polymer was determined to be: M_w is 6.9 × 10³ and M_n is 5.6 × 10³. The optical rotation of both chiral monomer and its polymer varies with the solvent polarity. The amplification of optical rotation due to transformation of monomer to polymer is associated with the ordered conformation of chiral monomer unit in the polymeric chain due to some secondary interactions like H‐bonding. The synthesized monomer and polymer exhibit intense Cotton effect at 220 nm. The conformation of the chain segments is sensitive to external stimuli, particularly the pH of the medium. In alkaline medium, the ordered chain conformation is destroyed resulting disordered random coils. The ordered coiling conformation is more firmly present on addition of HCl. The polymer exhibits swelling‐deswelling characteristics with the change of pH of the medium, which is reversible. The Cotton effect decreases linearly with the increase of temperature which is reversible on cooling. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2228–2242, 2009     

Regio/Stereoselective Glycosylation of Diol and Polyol Acceptors in Efficient Synthesis of Neu5Ac‐α‐2,3‐LacNPhth Trisaccharide

A concise approach to a Neu5Ac‐α‐2,3‐LacNPhth trisaccharide derivative was developed. First, the regio/stereoselective glycosylation between glycoside donors and glucoNPhth diol acceptors was investigated. It was found that the regioselectivity depends not only on the steric hindrance of the C2‐NPhth group and the C6‐OH protecting group of the glucosamine acceptors, but also on the leaving group and protecting group of the glycoside donors. Under optimized conditions, LacNPhth derivatives were synthesized in up to 92 % yield through a regio/stereoselective glycosylation between peracetylated‐α‐galactopyranosyl trichloroacetimidate and p‐methoxyphenyl 6‐O‐tert‐butyldiphenylsilyl‐2‐deoxy‐2‐phthalimido‐β‐d ‐glucopyranoside, avoiding the formation of glycosylated orthoesters and anomeric aglycon transfer. Then, the LacNPhth derivative was deacylated and then protected on the primary position by TBDPS to form a LacNPhth polyol acceptor. Finally, the Neu5Ac‐α‐2,3‐LacNPhth derivative was synthesized in 48 % yield through the regio/stereoselective glycosylation between the LacNPhth polyol acceptor and a sialyl phosphite donor. Starting from d ‐glucosamine hydrochloride, the target Neu5Ac‐α‐2,3‐LacNPhth derivative was synthesized in a total yield of 18.5 % over only 10 steps.     

Efficient Synthesis of 1,2,3,4,6‐Penta‐O‐acetyl‐L‐idopyranose

An efficient synthesis of 1,2,3,4,6‐penta‐O‐acetyl‐L ‐idopyranose 2 from 3,5‐O‐benzylidene‐1,2‐O‐isopropylidene‐α‐D ‐glucofuranose in five steps in 45% overall yield via hydroboration of enol ether, hydrolysis of L ‐idofuranosyl sugar and acetolysis of 1,6‐anhydro‐β‐L ‐idopyranose as key steps is described here.     

Ways of selective polycondensation of L‐lysine towards linear α‐ and ε‐poly‐L‐lysine

Polylysines (PL) are highly interesting polymers due to their biocompatibility and their high number of reactive amino groups. So far it was not possible to synthesize them directly from L ‐lysine. Here, we describe two different synthesis routes to selectively polymerize lysine in one batch without the use of protection groups. Applying 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide as activating agent for the polycondensation of L ‐lysine in water gave selectively linear ε‐PLL. In contrast to this, the polymerization of L ‐lysine in chloroform in the presence of dicyclohexyl carbodiimide and 18‐crown‐6 ether selectively afforded pure α‐PLL. We also assessed the capability of polylysine derivatization by polymer analog reactions with acetic anhydride, methyl iodide and 2,4,6‐trinitrobenzenesulfonic acid. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5053–5063, 2008     

Chiral,pH responsive hydrogels constructed by N‐Acryloyl‐alanine and PEGDA/α‐CD inclusion complex: preparation and chiral release ability

Chiral, pH‐responsive hydrogels are constructed by poly(ethylene glycol) diacrylate/α‐cyclodextrin (PEGDA/α‐CD) inclusion complex and L‐N‐acryloyl‐alanine or D‐N‐acryloyl‐alanine (L‐NAA or D‐NAA) by an effective free radical polymerization approach. PEGDA containing two C=C end groups was used simultaneously to introduce α‐CD units in the resulting hydrogels and to serve as a cross‐linking agent, by which forming the designed hydrogels in quantitative yield. Hydrophilic α‐CD moieties acted as pore‐forming agent, while the L(D)‐NAA‐based polymer chains bearing –COOH groups enabled the hydrogels to display remarkable swelling–deswelling behavior in response to pH variation. The chiral NAA monomer‐derived polymer chains rendered the hydrogels with intriguing optical activity, according to circular dichroism spectra. Scanning electron microscopy revealed the uniformly porous microstructures of hydrogels. More remarkably, the L‐NAA‐based hydrogels preferentially adsorbed trans‐4‐hydroxy‐d ‐proline and preferentially released trans‐4‐hydroxy‐l ‐proline, while D‐NAA‐based hydrogels provided opposite results. The hydrogels also demonstrated remarkable enantioselective release ability towards chiral drug ibuprofen. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and asymmetric polymerization of (S)‐N‐maleoyl‐L‐leucine propargyl ester

A kind of N‐substituted maleimide (RMI), chiral (S)‐N‐maleoyl‐L ‐leucine propargyl ester ((S)‐PLMI) with a specific rotation of [α]₄₃₅ = ?27.5° was successfully synthesized from maleic anhydride, L ‐leucine, and propargyl alcohol. (S)‐PLMI was polymerized by three polymerization methods to obtain the corresponding optically active polymers. Asymmetric anionic, radical, and transition‐metal‐catalyzed polymerizations were carried out using organometal/chiral ligands, 2,2′‐azobisisobutyronitrile (AIBN) and (bicyclo [2,2,1]hepta‐2,5‐diene) chloro rhodium (I) dimer ([Rh(nbd) Cl]₂), respectively. Poly((S)‐PLMI) obtained by [Rh(nbd)Cl]₂ in DMF showed the highest specific rotation of ?280.6°. Chiroptical properties and structures of the polymers obtained were investigated by GPC, CD, IR, and NMR measurements. Two types of poly((S)‐PLMI)‐bonded‐silica gels as the chiral stationary phase (CSP) were prepared for high‐performance liquid chromatography (HPLC). Their optical resolution abilities were also elucidated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3722–3738, 2007     

Preparation and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L‐lactide) polymer nanoparticles

A poly(D,L ‐lactide)–bromine macroinitiator was synthesized for use in the preparation of a novel biocompatible polymer. This amphiphilic diblock copolymer consisted of biodegradable poly(D,L ‐lactide) and 2‐methacryloyloxyethyl phosphorylcholine and was formed by atom transfer radical polymerization. Polymeric nanoparticles were prepared by a dialysis process in a select solvent. The shape and structure of the polymeric nanoparticles were determined by ¹H NMR, atomic force microscopy, and ζ‐potential measurements. The results of cytotoxicity tests showed the good cytocompatibility of the lipid‐like diblock copolymer poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L ‐lactide). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 688–698, 2007     

Imidazole‐initiated polymerizations of α‐amino acid N‐carboxyanhydrides – simultaneous chain‐growth and step‐growth polymerization

The N‐carboxyanhydrides (NCAs) of sarcosine (Sar), D ,L ‐leucine (D ,L ‐Leu), D ,L ‐phenylalanine (D ,L ‐Phe), and L ‐alanine (L ‐Ala) were polymerized in dioxane. Imidazole served as initiator and the NCA/initiator ratio was varied from 1/1 to 40/1. The isolated polypeptides were characterized by ¹H NMR spectroscopy, by MALDI‐TOF mass spectrometry, by viscosity measurements, and by SEC measurements in the case of poly(sarcosine). Cyclic oligopeptides were found in all reaction products and in the case of polySar, poly(D ,L ‐Leu), and poly(D ,L ‐Phe) the cycles were the main products. In the case of poly(L ‐Ala), rapid precipitation of β‐sheet lamellaes prevented efficient cyclizations and stabilized imidazolide endgroups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5690–5698, 2005     

Expression,Purification and Characterization of a Bifunctional α‐L‐Arabinofuranosidase/β‐D‐Xylosidase from Trichoderma Koningii G‐39

A gene of α‐L ‐arabinofuranosidase (Abf) from Trichoderma koningii G‐39 was successfully expressed in Pichia pastoris. The recombinant enzyme was purified to > 90% homogeneity by a cation‐exchanged chromatography. The purified enzyme exhibits both α‐L ‐arabinofuranosidase and β‐D ‐xylosidase (Xyl) activities with p‐nitrophenyl‐α‐L ‐arabionfuranoside (pNPAF) and 2,4‐dinitrophenyl‐β‐D ‐xylopyanoside (2,4‐DNPX) as substrate, respectively. The stability and the catalytic feature of the bifunctional enzyme were characterized. The enzyme was stable for at least 2 h at pH values between 2 and 8.3 at room temperature when assayed for Abf and Xyl activities. Enzyme activity decreased dramatically when the pH exceeded 9.5 or dropped below 1.5. The enzyme lost 35% of Abf activity after incubation at 55 °C for 2 h, but retained 95% of Xyl activity, with 2,4‐DNXP as substrate, under the same conditions. Further investigation of the active site topology of both enzymatic functions was performed with the inhibition study of enzyme activities. The results revealed that methyl‐α‐L ‐arabinofuranoside inhibition is noncompetitive towards 2,4‐DNPX as substrate but competitive towards pNPAF. Based on the thermal stability and the inhibition studies, we suggest that the enzymatic reactions of Abf and Xyl are performed at distinct catalytic sites. The recombinant enzyme possesses both the retaining transarabinofuranosyl and transxylopyranosyl activities, indicating both enzymatic reactions proceed through a two‐step, double displacement mechanism.     

Ring‐opening polymerization of benzylated 1,6‐anhydro‐β‐D‐lactose and specific biological activities of sulfated (1→6)‐α‐D‐lactopyranans

A new anhydro disaccharide monomer, 1,6‐anhydro‐2,3‐di‐o‐benzyl‐4‐o‐(2′,3′,4′,6′‐tetra‐o‐benzyl‐β‐D ‐galactopyranosyl)‐β‐D ‐glucopyranose (benzylated 1,6‐anhydro lactose (LSHBE)), was synthesized from D ‐lactose to investigate the polymerizability and biological activities of the resulting branched polysaccharides. The ring‐opening polymerization of LSHBE was carried out with phosphorus pentafluoride as a catalyst under high vacuum to give a stereoregular benzylated (1 → 6)‐α‐D ‐lactopyranan. The molecular weights of poly(LSHBE)s increased with an increase in the amount of CH₂Cl₂ solvent, and polymerization temperatures were affected in both molecular weights and yields of the polymers. The copolymerization of LSHBE with benzylated 1,6‐anhydro‐β‐D ‐glucopyranose (LGTBE) gave the corresponding copolysacchrides having different proportions of lactose and glucose units in good yields. After debenzylation to recover hydroxyl groups and then sulfation, sulfated homopoly(lactose)s and copoly(lactose and glucose)s were obtained. Sulfated homopoly(lactose)s had moderate anti‐HIV (EC₅₀ = 5.9 and 1.3 μg/mL) and blood anticoagulant activities (AA = 18 and 13 unit/mg), respectively. Sulfated copoly(lactose and glucose) having 15 mol % lactose units gave high anti‐HIV and blood anticoagulant activities of 0.3 μg/mL and 54 unit/mg, respectively. These biological results suggest that the distance between branched units on the main chain plays an important role in the anti‐HIV and blood anticoagulant activities. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 913–924, 2009     

Synthesis of polypeptides from activated urethane derivatives of α‐amino acids

A series of activated urethane‐type derivatives of α‐amino acids were synthesized and applied to polypeptide synthesis. The urethane used herein, N‐(4‐nitrophenoxycarbonyl)‐α‐amino acids 1 , were synthesized by N‐carbamoylation of γ‐benzyl‐L ‐glutamate, β‐benzyl‐L ‐aspartate, L ‐leucine, L ‐phenylalanine, and L ‐proline, with 4‐nitrophenyl chloroformate. When 1 was dissolved in N,N‐dimethylacetamide (DMAc) and heated at 60 °C, it was smoothly converted into the corresponding polypeptides with releasing 4‐nitrophenol and carbon dioxide. Spectroscopic analyses of the obtained polypeptides revealed that they were comparable with the authentic polypeptides synthesized by the ring‐opening polymerizations of amino acid N‐carboxyanhydrides (NCAs). Besides the successful polycondensations of a series of 1 , their polycondensations of 1a and other 1 were also successfully carried out to obtain the corresponding statistic copolypeptides. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2525–2535, 2008     

5‐Carboxymethyl‐2‐(4‐methylthiophenyl)‐1,3,2‐dioxaborolan‐4‐one: synthesis,characterization and application in enantioselective reduction of ketones

The reaction of arylboronic acids with L ‐O‐benzoyl‐tartaric acid and D ,L ‐malic acid has been studied. The obtained (acyloxy)boranes are moderately stable in solution and decompose to give boroxines. 5‐Carboxymethyl‐2‐(4‐methylthiophenyl)‐1,3,2‐dioxaborolan‐4‐one was obtained in the reaction of 4‐methylthiophenylboronic acid with D ,L ‐malic acid and characterized by X‐ray structural analysis. The use of L ‐(−)‐malic acid afforded the optically pure product which can be used as the powerful chiral reagent in the enantioselective reduction of ketones. Copyright © 2011 John Wiley & Sons, Ltd.