基于静电纺丝技术的多级结构聚合物纳米纤维复合材料的研究进展

静电纺丝技术是目前制备纳米纤维最重要的方法之一,以其制备的纤维具有直径可控、比表面积大、孔隙率高等优点,因而被广泛应用于过滤、催化、传感器及生物医学等众多领域.以静电纺丝纤维为模板可进一步构建多级结构的功能性聚合物纳米纤维复合材料,拓宽其应用范围.本文着重概述了近年来基于静电纺丝技术的简单共混型、核壳结构及多级结构的聚合物纳米纤维复合材料的制备、结构及性能,并展望了其应用研究前景.     

静电纺丝法在制备改性醋酸纤维素中的应用

纤维素是一种天然存在于有机物或植物中储量巨大的可再生资源。醋酸纤维素是在催化剂的作用下,将纤维素的羟基酯化而得到的一种热塑性树脂。由于其具有稳定,易于加工,不易燃烧,生物可降解性等特点,常用来替代天然纤维素作为静电纺丝的原料。静电纺丝技术作为目前制备纳米纤维材料的一种简单有效的方法,近些年来一直备受关注。本文系统介绍了以醋酸纤维素为静电纺丝的基体材料, 通过添加纳米粒子、聚合物溶液、表面改性、同轴电纺等物理改性方法以及再生纤维处理和硝化反应等化学改性方法制备改性醋酸纤维素纤维, 讨论了改性后的新材料结构和性能等多方面的变化。综述了近几年来国内外关于以静电纺丝法制备改性醋酸纤维素纤维的研究进展以及其在生物医药、组织工程支架、过滤膜以及功能性织物等方面的应用前景。     

纳米纤维素的制备*

在纳米尺寸范围操控纤维素分子及其超分子聚集体,结构设计并组装出稳定的多重花样,由此创制出具有优异功能的新纳米精细化工品、新纳米材料,是纤维素科学的前沿领域和热点。为了研究当前制备纳米纤维素的现状和发展方向,简述了纳米纤维素化学基础,介绍了三类纳米纤维素：纳米纤维素晶体（晶须）、纳米纤维素复合物和纳米纤维素纤维,重点综述了纳米纤维素的五种制备方法：化学法制备纳米纤维素晶体和晶须、生物法制备细菌纤维素、物理法制备微纤化纳米纤维素、人工合成纳米纤维素和静电纺丝制备纤维素纤维,讨论了各种制备方法的优点和缺点,指出开展纳米纤维素超分子的可控结构设计、立体与位向选择性控制与制备、分子识别与位点识别等自组装过程机理、多尺度结构效应的形成机理等基础理论性研究是主要研究基础,新型的、绿色、低能耗、快速、高效的制备方法是纳米纤维素制备方法的发展方向。     

模板法组装纳米有序阵列的研究进展

由金属、半导体、碳纳米管、聚苯胺等组成的纳米有序阵列体系,在能量存储或转换、传感等方面具有广阔的应用前景。模板法组装纳米有序阵列体系是以具有特定微孔结构的材料为模板,通过电化学沉积、溶胶-凝胶沉积和化学气相沉积等手段,让纳米单元在模板提供的受控环境中原位生成,形成纳米有序阵列体系。模板法具有可控性好、工艺简便、能耗低等优点。本文综述了模板法组装纳米有序阵列体系的研究进展,并对纳米有序阵列体系的应用前景作了展望。     

现代仪器分析在生物矿化研究中的应用

现代仪器分析技术在天然生物复合材料研究中具有十分重要的地位.人们对生物矿化的了解,从简单的有机/无机相间的叠层结构到复杂的多级构造、从晶粒的有序排列到特定的晶面取向、从定性描述可溶性有机基质(SM)和不可溶性有机框架(IM)到基质氨基酸分子的组分和蛋白质序列片段的解析、从有机/无机界面天然有机模板对无机结构的指导作用到人工组装的有机模板对诱导产物进行调控,尤其进入到分子水平,无不借助于分析测试技术的进步.     

石墨烯诱导水凝胶成核的高强韧人造蛛丝

天然蜘蛛丝是由β-sheet交联的蛛丝蛋白溶剂流入S-型导管后经牵引拉伸形成,它显示了高强度与高韧性的完美结合。其优异的力学性质主要源于它的多级结构：交联、线性排列的纳米组装体以及核壳结构。受此启发,我们合成了一种交联的水凝胶,通过牵引拉丝的方法,制备了交联的、含有取向排列的纳米组装体结构以及核壳结构的凝胶纤维,并通过少量引入二维纳米材料—氧化石墨烯(0.01%),进一步调控纳米组装体的取向和尺寸,实现了蜘蛛丝般优异的力学性能(断裂强度560 MPa,断裂韧性200 MJ·m^–3,缓冲能94%)。这种纤维可以用于高速下落物体的能量耗散和降低冲击力。     

纳米水凝胶合成方法的研究进展

粒径在1～1000nm范围内的纳米水凝胶可用于药物输送、医学诊断、生物传感器和生物物质分离等领域,近年来受到国内外普遍关注。本文从合成纳米水凝胶的原料入手,分别从单体与交联剂聚合和聚合物后交联两个方面综述了纳米水凝胶合成方法的研究进展。通过单体与交联剂聚合合成纳米水凝胶的方法主要有三种:沉淀聚合法、反相乳液聚合法和微模板聚合法。采用聚合物后交联合成纳米水凝胶的方法主要有四种:沉淀/交联法、乳化/交联法、自组装/交联法和微模板成型/交联法。另外,对这些合成方法的优缺点进行了评述,并对生物医用纳米水凝胶合成方法的研究方向提出了一些粗浅的看法。     

纤维素模板可控制备功能纳米材料的研究进展

作为自然界中最丰富的天然高分子材料,纤维素具备无毒无害、可再生、价格低廉和多层次空间结构等优点,被广泛应用在纺织、化学、可降解材料等领域。其中,纤维素特有的分子排列和多层次的空间结构,使其被广泛用作生物模板,进行可控制备功能纳米材料,纳米材料可以实现最大程度地复制出纤维素模板的纳米结构。本文综述了应用纤维素为模板,可控制备多种功能纳米材料(氧化物纳米材料、金属纳米材料、无机非金属复合纳米材料和其他无机纳米材料等)的最新进展,并展望了以纤维素模板可控制备功能纳米材料的未来研究方向。     

基于纤维素的气凝胶材料

纤维素是自然界中储量最为丰富的一种天然高分子。作为继无机气凝胶和合成聚合物气凝胶之后的第三代气凝胶,纤维素基气凝胶材料兼具绿色可再生的纤维素材料和多孔气凝胶材料两者的优点,成为纤维素材料研究与应用中的一个热点。本文梳理了纤维素基气凝胶材料的发展脉络,综述了纤维素基气凝胶材料的研究进展。重点对纤维素基气凝胶的制备方法进行了总结,包括基于含水溶剂和无水溶剂的纤维素直接溶解法及源自植物纤维素和细菌纤维素的纤维素纳米纤维的水相分散法。介绍了纤维素基气凝胶力学性能的提高和功能性开发的最新研究结果。最后对纤维素基气凝胶材料的发展前景和研究方向进行了展望。     

硫醇类配体修饰金纳米粒子在嵌段共聚物中自组装的研究进展

本文综述了不同类型硫醇配体修饰金纳米粒子的合成方法以及功能性金纳米粒子在嵌段共聚物薄膜中的自组装研究进展,重点介绍了硫醇类配体修饰金纳米粒子的合成方法,包括Brust合成法、原位合成法、grafting from合成法、配体置换法、单晶模板法等。总结了硫醇基小分子或聚合物配体修饰的金纳米粒子与嵌段共聚物之间自组装的调控方法,如利用配体与嵌段共聚物组分的隔离作用、配体与嵌段共聚物组分形成的氢键作用、溶剂蒸气退火或热退火等诱导嵌段共聚物/纳米粒子复合薄膜自组装。展望了功能性金纳米粒子以及嵌段共聚物/金纳米复合材料的发展方向。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.