SYNTHESIS OF HIGH THERMOSTABLE SILICONE GELS CONSTRUCTED WITH LADDERLIKE POLYSILSESQUIOXANES*

Heat-resistant silicone gels were synthesized by replacing the single main chain polymethylhydrosiloxane withreactive ladderlike polyhydrosilsesquioxane copolymers. Because of the interaction between polydimethylsiloxane chainsand the ladderlike polysilsesquioxanes chains, the cyclization of the polydimethylsiloxane chains is hindered. The highthermal stability of the ladderlike polymers can improve the thermal stability of the silicone gels without sacrificing their good comprehensive properties.     

SYNTHESIS OF LADDERLIKE POLYHYDROXYPROPYLSILSESQUIOXANE

Ladderlike polyhydroxypropylsilsesquioxane (HO-T) was synthesized by alcoholysis of ladderlike poly(3-propionyloxy-propyl)silsesquioxane. The HO-T was characterized by GPC, IR, NMR, DSC, TGA and X-ray diffractionmethods. Through hydrogen-bonding interaction, ladderlike polymer (HO-T) can form a supramolecular complex withsomewhat regular structure.     

SYNTHESES OF THE SOLUBLE,HIGH MOLECULAR WEIGHT AND LADDERLIKE POLYPH ENYLSILSESQUIOXAN E AND COPOLYMETHYLPHENYLSILSESQUIOXANES BY PREAMMINOLYSIS METHOD

Soluble, high molecular weight (MW) and ladderlike polyphenylsilsesquioxane (LPPSQ) and its copolymers, ladderlike random and block copolymethyiphenylsilsesquioxanes(LR-PMPSQ and LB-PMPSQ)have been prepared by preamminolysis, hydrolysis and polycondensation reactions. The preparation method can be carried out easily at the temperature below 95℃with high yield of 95 %, instead of the conventional way by using high-boiling solvent and any reaction activator or by precipitation with methanol. Three kinds of ladderlike polymers have been characterized. The MW's of the polymers reached to 10~6 without noticeable gelling. The scheme for synthetic route has been proposed.     

Film formation stages for poly(vinyl acetate) latex particles: a photon transmission study

Photon transmission technique was used to monitor the evolution of transparency during film formation from poly(vinyl acetate) (PVAc) latex particles. The latex films were prepared below the glass transition temperature (T _g) of PVAc. These films were annealed at elevated temperatures in various time intervals above the T _g of PVAc. It is observed that transmitted photon intensity (I _tr) from these films increased as the annealing temperature is increased. It is seen from I _tr curves that there are two film formation stages. These successive stages are named void closure (viscous flow) and interdiffusion. The activation energies for viscous flow (ΔH) and backbone motion (ΔE _b) were obtained by using well-defined models. The averaged values of the backbone (ΔE _b) and the viscous flow activation energies (ΔH) were found to be 188.6 and 5.6 kcal/mol, respectively. The minimum film formation (τ _M,T _M) and healing points (τ _H,T _H) were determined. Minimum film formation (ΔE _M) and healing activation energies (ΔE _H) were measured using these time–temperature pairs. ΔE _M and ΔE _H were found to be 32.5 and 28.3 kcal/mol, respectively.     

TL glow-curve deconvolution functions for various kinetic orders and continuous trap distribution: Acceptance criteria for E and s values

The glow curve deconvolution (GCD) analysis of a composite thermoluminescence (TL) glow curve into its individual glow-peaks needs appropriate equations describing a single glow peak. In the present work, new single glow peak equations are presented, which are produced by transformation of the I(n ₀,E,s,T) and I(n ₀,E,s,b,T) single glow-peak equations into I(I _m,T _m,E,T) and I(I _m,T _m,E,b,T), respectively. Moreover, equations of the forms I(I _m,T _m,w,b,T) are also introduced. The proposed equations have two basic advantages: (1) they use parameters, which are directly obtained from the experimental glow peaks and (2) their accuracy is equal to that of the original thermoluminescence single glow-peak equations.     

SYNTHESIS AND-CHARACTERIZATION OF THE SOLUBLE, HIGH MOLECULAR WEIGHT AND LADDERLIKE POLYHYDROSILSESQUIOXANE AND ITS COPOLYMERS

The high molecular ladderlike polyhydrosilsesquioxane (LPHSQ) and its copolymer, ladderlike random copolymethylhydrosilsesquioxane (LR-PMHSQ) and ladderlike block copolymethylsilsesqui-oxane(LB-PMHSQ) have been synthesized by a preaminolysis reaction of the corresponding trichlorosilane with 1 ,4-phenylene diamine(PDA) then by hydrolysis and polycondensation reactions The thermographs of these polymers measured by DSC method indicate that these macromolecular backbones are very rigid as seen from the DSC curves which are almost horizontal from room temperature until 350 ~C without noticeable glass transition. The content of Si—H group in the polymers can be regulated by changing the composition of the two copolymerized monomers. So the ladderlike polymers including its copolymers can be the useful precursors for the functional polymers, especially such as fishbone-like liquid crystalline polymers.     

Pyrene fluorescence measurements of metastable oil droplets in surfactant-free oil-in-water emulsions

 The fluorescence behavior of pyrene in oil droplets of a surfactant-free oil-in-water emulsion was studied for benzene, fluorobenzene, n-hexane and cyclohexane droplets in water. The excimer–monomer fluorescence ratio immediately after sonication, I _E/I _M(0), of the benzene/water emulsion was 8–10 times larger than for the benzene solution. The ratio I _E/I _M(t) increased in the first 10–20 min before it decreased to zero. Similar behavior was observed for the fluorobenzene/water emulsion, while I _E/I _M(0) for emulsions with n-hexane and cyclohexane was smaller than for benzene and fluorobenzene/water emulsions. I _E/I _M(t) hardly changed with time for the n-hexane and cyclohexane/water emulsions. This different behavior was attributed to the increased solubility of nanometer-size droplets with benzene and fluorobenzene. Received: 20 June 2001 Accepted: 19 April 2001     

STUDIES ON REGULARITY OF POLY PHENYLSILSESQUIOXANE CHAINS

IR and ~(29)Si NMR were used to determine the structures of ladderlike polymer polyphenylsilsesquioxanes (PPS). It was found that PPS with lots of defects had a wide and strong absorption band in 1000—1400 cm~(-1) with only one sharp peak at 1137 cm~(-1) while two peaks (1130 and 1045 cm~(-1) were observed for PPS with perfect ladderlike structure. Branching and crosslinking of PPS lead to the reduction of 1045 cm~(-1) peak. ~(29)Si NMR spectra, however, showed two peaks (δ=-78 ppm and -87 ppm when δ_(HMDS)=0 ppm) for defective or branched PPS. The -87 ppm peak is related to the ladderlikely constructed Si atoms and -78 ppm corresponds to defective Si atoms. PPS with defects less than 0.1% chain units was obtained by azeotropic polycondensations.     

Interaction of cetyltrimethylammonium bromide and poly(2-(acrylamido)-2-methylpropanesulfonic acid) in aqueous solutions determined by excimer fluorescence

 The binding interaction of the cationic surfactant cetyltrimethylammonium bromide (CTAB) and anionic poly(2-(acrylamido)-2-methylpropanesulfonic acid) (PAMPS) in dilute aqueous solutions was studied using the excimer fluorescent emission of the cationic probe 1-pyrenemethylamine hydrochloride (PyMeA·HCl). In the absence of CTAB, the saturation binding of PyMeAH⁺ on PAMPS is about 2.4 AMPS repeat units for one probe cation as determined by the relative emission intensity, I _E/I _M, of the excimer to monomer. With increasing CTAB concentration, I _E/I _M firstly increases, reaches a maximum, then decreases to zero. The I _E/I _M maximum indicates a critical aggregation concentration (cac) of 10⁻⁵ mol/l for CTAB in PAMPS solutions. The CTAB concentration at which I _E/I _M is zero is exactly equal to the PAMPS concentration, indicating that the probe cation is thoroughly excluded from the binding site of PAMPS by the CTAB cation and the equivalent stoichiometric aggregation is formed between CTAB and PAMPS. The blueshift of the excimer emission and the excitation spectra shows that the decrease of I _E/I _M with increasing CTAB concentration above the cac is caused mainly by the decrease of the static excimer. Received: 26 July 2000 Accepted: 23 November 2000     

Extension of the chain‐end,free‐volume theory for predicting glass temperature as a function of conversion in hyperbranched polymers obtained through one‐pot approaches

Compared with linear polymers, more factors may affect the glass‐transition temperature (T_g) of a hyperbranched structure, for instance, the contents of end groups, the chemical properties of end groups, branching junctions, and the compactness of a hyperbranched structure. T_g's decrease with increasing content of end‐group free volumes, whereas they increase with increasing polarity of end groups, junction density, or compactness of a hyperbranched structure. However, end‐group free volumes are often a prevailing factor according to the literature. In this work, chain‐end, free‐volume theory was extended for predicting the relations of T_g to conversion (X) and molecular weight (M) in hyperbranched polymers obtained through one‐pot approaches of either polycondensation or self‐condensing vinyl polymerization. The theoretical relations of polymerization degrees to monomer conversions in developing processes of hyperbranched structures reported in the literature were applied in the extended model, and some interesting results were obtained. T_g's of hyperbranched polymers showed a nonlinear relation to reciprocal molecular weight, which differed from the linear relation observed in linear polymers. T_g values decreased with increasing molecular weight in the low‐molecular‐weight range; however, they increased with increasing molecular weight in the high‐molecular‐weight range. T_g values decreased with increasing log M and then turned to a constant value in the high‐molecular‐weight range. The plot of T_g versus 1/M or log M for hyperbranched polymers may exhibit intersecting straight‐line behaviors. The intersection or transition does not result from entanglements that account for such intersections in linear polymers but from a nonlinear feature in hyperbranched polymers according to chain‐end, free‐volume theory. However, the conclusions obtained in this work cannot be extended to dendrimers because after the third generation, the end‐group extents of a dendrimer decrease with molecular weight. Thus, it is very possible for a dendrimer that T_g increases with 1/M before the third generation; however, it decreases with 1/M after the third generation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1235–1242, 2004     

SYNTHESIS AND MESOMORPHIC PROPERTIES OF FISHBONE-LIKE LIQUID CRYSTALLINE POLYSILSESQUIOXANES——Ⅰ. FISHBONE-LIKE, β-DIKETONE-BASED LIQUID CRYSTALLINE POLYSILSESQUIOXANES AND THEIR COPPER COMPLEXES*

Two kinds of fishbone-like, β-diketone-based liquid crystalline polysilsesquioxanes(FBDKLCP'S), homopolymeric (H-FBDKLCP) and copolymeric (C-FBDKaLCP) have been first synthesized via the hydrosilylation reaction of a vinyl-terminated β-diketone with the homopolymeric ladderlike polyhydrosilsesquioxane (LPHSQ) and random copolymethylhydrosilsesquioxane (LRPMHSQ) respectively. These new kinds of FBDKLCP with M of 10~4 is thermotroic liquid crystalline polymer and its clearing temperatures T_i's and mesophase range △T's are much higher than those of the corresponding comb-like β-diketone liquid crystalline polysiloxane (DKLCP) by about 200℃. Similar results have been observed with the comparison of the two different structure Cu-coordinating compounds The significant increases in T_((?))'s and △T's of the FBDKLCP and Cu-FBDKLCP are mainly attributed to the great rigidity of the ladderlike polysilsesquioxane backbone.     

Physicochemical constants as a factor determining the need for the derivatization of organic substances in analysis by gas chromatography

A criterion was proposed to estimate the necessity of the derivatization of organic substances for their determination on conventional nonpolar phases, based on such characteristic of analytes as molecular weight (M _r), normal boiling point (T _bp), and molar refraction (MR _D). All these constants can be presented as indices relative to nonpolar n-alkanes (similarly to chromatographic retention indices), I(M), I(T), and I(MR _D), which can be compared to each other as differences Δ_{T − M} = I(T) − I(M) and Δ_{T − M} R _D = I(T) − I(MR _D). Substances do not require derivatization if Δ_{T − M} < 400 and Δ_{T − M} R _D < 600, while at Δ_{T − M} > 600 and Δ_{T − MRD} > 800, derivatization is necessary.     

Physicochemical and macromolecular properties of sodium amylose xanthate in dilute solution

Sodium amylose xanthate has been studied in dilute solution. Potato starch was fractionated for this purpose into amylose and amylopectin fractions. Amylose was xanthated in solution under alkaline conditions and the Na amylose xanthate was then characterized by reaction with I₂ solution and ultraviolet spectra of the xanthate groups determined. Stability of the xanthate in alkaline condition under both oxygen and nitrogen atmospheres was also investigated. From light scattering measurements of dilute salt solutions of Na amylose xanthate, the weight-average molecular weight M _w as well as the molecular dimensions were determined. In 0.11M NaCl, which conforms to the θ solvent, Na amylose xanthate molecules appear to have a random-coil configuration. Two other configurational parameters, such as the effective bond length b, and the steric factor σ, i.e., (R₀²)^1/2/(R_f² )^1/2, where (R₀²)^1/2 is the Root-mean-square end-to-end distance in the unperturbed state and (R_f² )^1/2 is the unperturbed value calculated on the assumption of free rotation about each intermonomer C? O bond of the amylose chain were also calculated and found to be 6.24 and 1.020, respectively. It is thus concluded that the amylose chain in Na amylose xanthate behaves as a typical flexible coil in dilute salt solution.     

Crystallization and dissolution temperatures of poly(vinyl alcohol) crystal lamellae

Poly(vinyl alcohol) single crystal platelets having a stepheight of approximately 100 A. were obtained by isothermal crystallization from dilute triethylene glycol solution. Material crystallized at temperature T_c redissolved in the same solvent at a higher temperature T_s. A plot of T_c versus T_s gave a straight line of slope 0.47. Extrapolation of this line to T_c = T_s gave (T_m)∞, which may be regarded as the dissolution temperature of the crystal of infinite stepheight. (T_m)∞ for this sample in triethylene glycol was 220°C. The crystalline nature of the platelets was established by electron and x-ray diffraction techniques. A total of three Bragg d spacings having the values of 3.9, 4.4, and 4.6 A. (±0.05 A.) were measured. These spacings were indexed as the (200), (101), and (101 ) reflections, respectively, of the monoclinic unit cell of Bunn. The x-ray diffractogram exhibits sharp intensities of the (101 ) and (101) reflections. The crystallinity calculated from the density of the poly(vinyl alcohol) precipitated from dilute solutions in triethylene glycol was 42%. Although the overall degree of crystalline perfection of this poly(vinyl alcohol) is low, the linear relationship between T_s and T_c and the formation of definite shaped single crystals when crystallized from dilute solution suggest that poly(vinyl alcohol) crystallizes in the same manner as other semicrystalline polymers.     

SYNTHESIS AND CHARACTERIZATION OF A SOLUBLE LADDERLIKE POLYSILSESQUIOXANE CONTAINING REACTIVE ESTER GROUPS*

A novel soluble ladderlike polysilsesquioxane containing reactive ester groups (Ester-T) was synthesized for thefirst time by stepwise coupling polymerization including preammonolysis, controlled hydrolysis and polycondensation. Themonomer, 3-trichlorosilylpropoxy 4-acetoxybenzoate (M), was synthesized by hydrosilylation of allyloxy 4-acetoxybenzoatewith trichlorosilane in the presence of dicyclopentadienylplatinum (II) chloride (Cp_2PtCl_2) catalyst. Combination of FTIR,~1H-NMr, ~(13)C-NMR, ~(29)Si-NMR, XRD, DSC, TGA and VPO methods was used to demonstrate that the polymer obtained hasan ordered ladderlike structure. The synthesized Ester-T may have promising applications as a precursor of advanced functional polymers.     

Influence of long‐chain branching on the miscibility of poly(ethylene‐r‐ethylethylene) blends with different microstructures

The melt miscibility of two series of poly(ethylene‐r‐ethylethylene) (PE_Exx) polymers with different percentages (xx) of ethylethylene (EE) repeat units was examined with small‐angle neutron scattering (SANS). The first series consisted of comb/linear blends in which the first component is a heavily branched comb polymer (B90) containing 90% EE and an average of 62 long branches with a weight‐average molecular weight (M_W) of 5.5 kg/mol attached to a backbone with M_W = 10.0 kg/mol. The comb polymer was blended with six linear PE_Exx copolymers, all of which had M_W ≈ 60 kg/mol and EE percentages ranging from 55 to 90%; they were denoted L55 to L90, with the number referring to the percentage of EE repeat units. The second series consisted of linear/linear blends; the first component, with M_W = 220 kg/mol and 90% EE, was denoted L90A, and the second components were the same series of linear polymers, with M_W ≈ 60 kg/mol and various EE compositions. The concentrations investigated were 50/50 w/w, except for the blend of branched B90 and linear L90 (both components were 90% EE), for which 25/75 and 75/25 concentrations were also examined. The SANS results indicated that for the comb/linear blends, only the dB90/L90 blends were miscible, whereas the other five blends phase‐separated; for the linear/linear blends, dL90A/L83 and dL90A/L78 were miscible, whereas the other three blends were immiscible. These results indicate that long‐chain branching significantly narrowed the miscibility window of these polyolefin blends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 466–477, 2002; DOI 10.1002/polb.10102     

Approximate formulae for calculation of the integral òT0Tmexp(-E/RT)dT

Summary In this paper two approximate formulae have been developed for calculation of the integral ò^T₀T^mexp(-E/RT)dT by using integration-by-parts approaches. They are in the following forms: I(m,T) = (RT^m+2)/(E+(m+2)RT)exp(-E/RT) I(m,T) = (RT^m+2)/(E+(m+2)(0.00099441E+0.93695599RT)exp(-E/RT) The validity of the two formulae has been confirmed and their accuracies have been tested with data from numerical calculating. In contrast to existing other integral methods, both the present approaches are simply used, accurate, and can be used for arbitrary values of m.     

STUDY ON THE SYNTHESIS AND CHARACTERIZATION OF THE SOLUBLE, HIGH MOLECULAR WEIGHT AND LAD D ERLIKE PO LYMETH YLSILSESQ UIO XANE

A new method for the preparation of a soluble ladderlike polymethylsilsesquioxane with high molecular weight ((?)=10~5—10~6) and low molecular weight distribution (D=Mw/Mn) in common solvents instead of the formerly used toxic methylisobutylketone has been developed. The structure and macromolecular regularity were characterized by IR, X-ray diffraction, and ~(29)Si-NMR spectroscopy. The thermal property was studied by TGA and DSC.     

Effect of the directionality of the ester group on the formation of hairpins in polyesters containing naphthalene and a flexible spacer

Steady-state fluorescence measurements and molecular dynamics simulations have been used to study the intramolecular formation of excimers in five model compounds for polyesters containing naphthalene groups separated by flexible spacers. The model compounds are derived from 2-hydroxynaphthalene and HOOC (CH₂)_n COOH, n = 2–6. The ratio of the intensity of excimer and monomer emissions, I_D/I_M, is nearly independent of the viscosity of the medium, η, over the range covered in dilute solution. Although I_D/I_M is always very small, it shows an odd–even effect for the first four members of the series, with maxima when n is odd. Molecular dynamics simulations provide an explanation for the small values of I_D/I_M, their weak dependence on η, and the trend of I_D/I_M with n. The results for the present series of model compounds are compared with previous work, which reported larger values of I_D/I_M, and a stronger dependence of I_D/I_M on η, for bichromophoric compounds derived from 2-naphthoic acid and aliphatic glycols, where the direction of the ester groups is reversed. The origin of the difference in the behavior of I_D/I_M in the two series is identified. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1127–1133, 1997     

Synthesis,Characterization, and Properties of Tetraphenylethylene-Based Tetrakis-NHC Ligands and Their Metal Complexes

The development of highly emissive dinuclear Ag^I or Au^I complexes [M₂L](PF₆)₂ (L= 2 a , 2 b ; M=Ag, Au) derived from tetraphenylethylene (TPE)-based tetrabenzimidazolin-2-ylidene ligands is reported. The new complexes exhibit a remarkable fluorescence enhancement compared to their parent benzimidazolium salts. The quantum yield (Φ_F) value for salt H₄- 2 a (PF₆)₄ in dilute solution (c=10⁻⁵ m ) was found to be less than 1 %, whereas its metal complexes show Φ_F values up to 55 % at similar solution concentration. This observation can be attributed to the rigidification of the TPE skeleton upon metalation resulting in a restriction of the intramolecular rotation of the phenyl groups. Functionalization of the complexes [M₂ 2 b ](PF₆)₂ (M=Ag, Au) with terminal coumarin groups and subsequent photoirradiation yielded the complexes [M₂ 3 b ](PF₆)₂ (M=Ag, Au) bearing a new type of ligand with an unaffected TPE moiety.