A new trigonometric shear deformation theory for isotropic,laminated composite and sandwich plates

A new trigonometric shear deformation theory for isotropic and composite laminated and sandwich plates, is developed. The new displacement field depends on a parameter “m”, whose value is determined so as to give results closest to the 3D elasticity bending solutions. The theory accounts for adequate distribution of the transverse shear strains through the plate thickness and tangential stress-free boundary conditions on the plate boundary surface, thus a shear correction factor is not required. Plate governing equations and boundary conditions are derived by employing the principle of virtual work. The Navier-type exact solutions for static bending analysis are presented for sinusoidally and uniformly distributed loads. The accuracy of the present theory is ascertained by comparing it with various available results in the literature. The results show that the present model performs as good as the Reddy’s and Touratier’s shear deformation theories for analyzing the static behavior of isotropic and composite laminated and sandwich plates.     

A new simple third-order shear deformation theory of plates

An improved simple third-order shear deformation theory for the analysis of shear flexible plates is presented in this paper. This new plate theory is composed of three parts: the simple third-order kinematics of displacements reduced from the higher-order displacement field derived previously by the author; a system of 10th-order differential equilibrium equations in terms of the three generalized displacements of bending plates; five boundary conditions at each edge of plate boundaries. Although the resulting displacement field is the same as that proposed by Murthy, the variational consistent governing equations and the associated proper boundary conditions are derived and identified in this work for the first time in the literature. The applications and accuracy of the present shear deformation theory of plates are demonstrated by analytically solving the differential governing equations of a twisting plate, a bending beam and two bending plates to which the 3-D elasticity solutions are available, and excellent agreements are achieved even for the torsion of a plate with square cross-section as well the local effects of stresses at plate boundaries can be characterized accurately. These analytical solutions clearly show that the simple third-order shear deformation theory developed in this work indeed gives better results than the first-order shear deformation theories and other simple higher-order shear deformation theories, since the present third-order shear flexible theory is based on a more rigorous kinematics of displacements and consists of not only a system of variational consistent differential equations, but also a group of consistent boundary conditions associated with the differential equations. The present simple third-order shear deformation theory can easily be applied to the static and dynamic finite element analysis of laminated plates just like the applications of other popular shear flexible plate theories, and improved results could be obtained from the present simple third-order shear deformable theories of plates.     

An exact analytical approach for in-plane and out-of-plane free vibration analysis of thick laminated transversely isotropic plates

In this article, the governing equations of motion of thick laminated transversely isotropic plates are derived based on Reddy’s third-order shear deformation theory. These equations are exactly converted to four uncoupled equations to study the in-plane and out-of-plane free vibrations of thick laminated plates without any usage of approximate methods. Based on the present analytical approach, exact Levy-type solutions are obtained for thick laminated transversely isotropic plates and, for some boundary conditions, the exact characteristic equations hitherto not reported in the literature are given. Also, the in-plane and out-of-plane deformed mode shapes are plotted for different boundary conditions. The present solutions can accurately predict both the in-plane and out-of-plane natural frequencies and mode shapes of thick laminated transversely isotropic plates.     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

Higher-order crack tip fields for functionally graded material plate with transverse shear deformation

The crack tip fields are investigated for a cracked functionally graded material (FGM) plate by Reissner’s linear plate theory with the consideration of the transverse shear deformation generated by bending. The elastic modulus and Poisson’s ratio of the functionally graded plates are assumed to vary continuously through the coordinate y, according to a linear law and a constant, respectively. The governing equations, i.e., the 6th-order partial differential equations with variable coefficients, are derived in the polar coordinate system based on Reissner’s plate theory. Furthermore, the generalized displacements are treated in a separation-of-variable form, and the higher-order crack tip fields of the cracked FGM plate are obtained by the eigen-expansion method. It is found that the analytic solutions degenerate to the corresponding fields of the isotropic homogeneous plate with Reissner’s effect when the in-homogeneity parameter approaches zero.     

复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法

基于一阶剪切变形理论,提出了复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法。计算时在复合材料层合板中面上仅需要布置一系列的离散节点,并利用这些节点构建插值函数。在板中面上的局部多边形子域上,采用加权余量法建立复合材料层合板自由振动分析的离散化控制方程,并且这些子域可由Delaunay三角形方便创建。自然邻接点插值形函数具有Kronecker delta函数性质,因而无需经过特别处理就能准确地施加本质边界条件。对不同边界条件、不同跨厚比、不同材料参数和不同铺设角度的复合材料层合板,由本文提出的无网格自然邻接点Petrov-Galerkin法进行自由振动分析时均可得到满意的结果。数值算例结果表明,本文方法求解复合材料层合板的自由振动问题是行之有效的。     

Mechanical buckling and free vibration of thick functionally graded plates resting on elastic foundation using the higher order B-spline finite strip method

In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed.     

A new five-unknown refined theory based on neutral surface position for bending analysis of exponential graded plates

In the present paper, a new sinusoidal higher-order plate theory is developed for bending of exponential graded plates. The effects due to transverse shear and normal deformations are both included. The number of unknown functions involved in the present theory is only five as against six or more in case of other shear and normal deformation theories. The theory accounts for sinusoidal distribution of the transverse shear strains, and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factor. Based on the sinusoidal shear and normal deformation theory, the position of neutral surface is determined and the governing equilibrium equations based on neutral surface are derived. There is no stretching–bending coupling effect in the neutral surface-based formulation, and consequently, the governing equations of functionally graded plates based on neutral surface have the simple forms as those of isotropic plates. Numerical results of present theory are compared with three-dimensional elasticity solutions and other higher-order theories reported in the literature. It can be concluded that the proposed theory is accurate and efficient in predicting the bending response of exponential graded plates.     

Stability and vibration of shear deformable plates––first order and higher order analyses

This work presents the highly accurate numerical calculation of the natural frequencies and buckling loads for thick elastic rectangular plates with various combinations of boundary conditions. The Reissener–Mindlin first order shear deformation plate theory and the higher order shear deformation plate theory of Reddy have been applied to the plate’s analysis. The governing equations and the boundary conditions are derived using the dynamic version of the principle of minimum of the total energy. The solution is obtained by the extended Kantorovich method. This approach is combined with the exact element method for the vibration and stability analysis of compressed members, which provides for the derivation of the exact dynamic stiffness matrix including the effect of in-plane and inertia forces. The large number of numerical examples demonstrates the applicability and versatility of the present method. The results obtained by both shear deformation theories are compared with those obtained by the classical thin plate’s theory and with published results. Many new results are given too.     

BENDING OF SECTORIAL LEVINSON PLATES: RELATIONSHIPS WITH CLASSICAL SOLUTIONS*

ABSTRACT

Relationships between bending solutions (deflections and stress resultants) of the Levinson third-order plate theory are presented in terms of the solutions of the classical plate theory for sectorial plates. These relationships are algebraic in nature, and can be readily used to determine the shear deformation theory (based on the Levinson plate theory) solutions of sectorial plates without going through the process of solving the governing equations. The sectorial plates considered have simply supported radial edges while the circular curved edges may be either simply supported, clamped, or free. Numerical results are presented to illustrate the usefulness of the developed relationships.

     

基于物理中面FGM中厚板自由振动的有限元分析

基于物理中面和一阶剪切变形板理论,研究了不同边界条件下功能梯度材料(FGM)中厚板的自由振动问题．假设功能梯度板的材料性质沿厚度方向按幂函数规律连续变化．根据哈密顿原理建立了FGM板有限元形式的自由振动方程,利用MATLAB软件编写程序进行了计算．通过数值算例,讨论了不同边界条件下FGM中厚板的无量纲频率随材料梯度指数和厚宽比的变化情况,并与经典板理论下的频率进行了比较．     

The validity range of CPT and Mindlin plate theory in comparison with 3-D vibrational analysis of circular plates on the elastic foundation

The validity and the range of applicability of the classical plate theory (CPT) and the first-order shear deformation plate theory, also called Mindlin plate theory (MPT), in comparison with three-dimensional (3-D) p-Ritz solution are presented for freely vibrating circular plates on the elastic foundation with different boundary conditions. In order to achieve this purpose, a study of the 3-D elasticity solution is carried out to determine the free vibration frequencies of clamped, simply supported and free circular plates resting on an elastic foundation. The Pasternak model with adding a shear layer to the Winkler model is used for describing the elastic foundation. In addition to being employed the p-Ritz algorithm, the analysis is based on the linear, small strain and 3-D elasticity theory. In this analysis method, a set of orthogonal polynomial series in a cylindrical polar coordinate system is used to arrive eigenvalue equation yielding the natural frequencies for the circular plates. The accuracy of these results is verified by appropriate convergence studies and checked with the available literature and the MPT. Furthermore, the effect of the foundation stiffness parameters, thickness-radius ratio, and different boundary conditions on the ill-conditioning of the mass matrix as well as on the vibration behavior of the circular plates is investigated. Afterwards, the validity and the range of applicability of the results obtained on the basis of the CPT and MPT for a thin and moderately thick circular plate with different values of the foundation stiffness parameters are graphically presented through comparing them with those obtained by the present 3-D p-Ritz solution. Finally, the phenomenon of mode shape switching is investigated in graphical forms for a wide range of the Winkler foundation stiffness parameters.     

Nonlinear bending analysis of FGM rectangular plates with various supported boundaries resting on two-parameter elastic foundations

In this paper, model of the FGM plates resting on two-parameter elastic foundations is put forward by using on physical neutral surface and high-order shear deformation theory. Material properties are assumed to be temperature dependent and vary along the thickness, while Poisson’s ratio depends weakly on temperature change and position and is assumed to be a constant. It is worth noting that physical neutral surface will be changed with temperature. The character of physical neutral surface higher-order shear deformation plate theory is that the displacements have special forms, stretching-bending couplings are eliminated in constitutive equations, and governing equations have the simple and similar forms as homogeneous isotropic plates. The validity of physical neutral surface higher-order shear deformation plate theory can be confirmed by comparing with related researchers’ results. Nonlinear bending approximate solutions of FGM rectangular plates with six cases of boundary conditions are given out using Ritz method, and influences played by different supported boundaries, foundation stiffnesses, thermal environmental conditions, and volume fraction index are discussed in detail.     

Flexoelectric vibration analysis of nanocomposite sandwich plates

Abstract

In the present study, free vibration of sandwich flexoelectric plates resting on Pasternak foundation is investigated. The top and bottom layers are under applied voltage based on flexoelectricity considerations and core is a nanocomposite plate where reinforced by carbon nanotubes. Based on first-order shear deformation theory, flexoelectricity considerations and Hamilton’s principle, the governing equations are derived for the first time. Navier’s method is used to solve the governing equations analytically in the case of simply supported sandwich plate. Finally, the effects of different parameters are discussed in details. It is found when thickness of flexoelectric face sheets increase, the frequency of nano-sandwich plate decrease. The results of this study can be useful in design and manufacturing of flexoelectric systems as sensor and actuator.     

基于修正偶应力和高阶剪切变形理论的变截面微梁的自由振动

基于修正偶应力和高阶剪切理论建立了仅含有一个尺度参数的Reddy变截面微梁的自由振动模型,研究了变截面微梁自由振动问题的尺度效应和横向剪切变形对自振频率计算的影响。基于哈密顿原理推导了动力学方程与边界条件,并采用微分求积法求解了各种边界条件下的自振频率。算例结果表明,基于偶应力理论预测的变截面微梁的自振频率均大于经典梁理论的预测结果,即捕捉到了尺度效应。另外,梁的几何尺寸与尺度参数越接近,尺度效应就越明显,而梁的长细比越小,横向剪切变形对自振频率的影响就越明显。     

剪切变形对FGM圆板轴对称屈曲的影响

基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。在推导过程中，忽略了前屈曲耦合变形。利用一阶板理论与经典板理论屈曲方程之间在数学形式上的相似性，得到了一阶板理论下功能梯度材料圆板与经典板理论下均匀圆板临界屈曲载荷之间的解析关系。利用这个解析关系，可以直接从已有的较为简单的经典理论的结果，获得一阶板理论下功能梯度材料板的临界屈曲载荷。     

Exact solutions for axisymmetric flexural free vibrations of inhomogeneous circular Mindlin plates with variable thickness

Circular plates with radially varying thickness, stiffness, and density are widely used for the structural optimization in engineering. The axisymmetric flexural free vibration of such plates, governed by coupled differential equations with variable coefficients by use of the Mindlin plate theory, is very difficult to be studied analytically.In this paper, a novel analytical method is proposed to reduce such governing equations for circular plates to a pair of uncoupled and easily solvable differential equations of the Sturm-Liouville type. There are two important parameters in the reduced equations.One describes the radial variations of the translational inertia and flexural rigidity with the consideration of the effect of Poisson's ratio. The other reflects the comprehensive effect of the rotatory inertia and shear deformation. The Heun-type equations, recently well-known in physics, are introduced here to solve the flexural free vibration of circular plates analytically, and two basic differential formulae for the local Heun-type functions are discovered for the first time, which will be of great value in enriching the theory of Heun-type differential equations.     

Thin plate spline radial basis functions for vibration analysis of clamped laminated composite plates

A meshless method based on thin plate spline radial basis functions and higher-order shear deformation theory are presented to analyze the free vibration of clamped laminated composite plates. The singularity of thin plate spline radial basis functions is eliminated by adding infinitesimal to the zero distance. Convergence characteristics of the present thin plate spline radial basis functions for the vibration analysis of the clamped laminated plates are investigated. The frequencies computed by the present method agree well with the available published results.     

功能梯度与均匀圆板静动态解之间的相似转换关系

基于经典板理论,研究了功能梯度材料圆板的轴对称弯曲、屈曲和自由振动解与相应的均匀材料圆板解之间的转换关系.通过消去拉-弯耦合项得到了以挠度函数表示的功能梯度圆板的弯曲、屈曲和自由振动控制方程.分析功能梯度圆板与均匀圆板的控制方程之间的相似性,得到了功能梯度材料圆板与均匀圆板的解之间解的相似转换关系,在假定FGM圆板的材料性质沿厚分别以幂函数和指数函数的度变规律后,给出了相应的转换系数的解析表达式.该系数集中反映了功能梯度圆板的材料非均匀性.在已知均匀材料圆板轴对称解的条件下,可将功能梯度材料圆板轴对称问题的求解转化为相似转换系数的计算问题.这一方法可为非均匀板的求解提供了十分便捷有效的途径,而且便于工程应用.