TRANSIENT SIMULATION OF INTERNAL SEPARATED FLOWS USING AN INTELLIGENT HIGHER-ORDER SPATIAL DISCRETIZATION SCHEME

This paper summarizes the method-of-lines (MOL) solution of the Navier–Stokes equations for an impulsively started incompressible laminar flow in a circular pipe with a sudden expansion. An intelligent higher-order spatial discretization scheme, which chooses upwind or downwind discretization in a zone-of-dependence manner when flow reversal occurs, was developed for separated flows. Stability characteristics of a linear advective–diffusive equation were examined to depict the necessity of such a scheme in the case of flow reversals. The proposed code was applied to predict the time development of an impulsively started flow in a pipe with a sudden expansion. Predictions were found to show the expected trends for both unsteady and steady states. This paper demonstrates the ease with which the Navier–Stokes equations can be solved in an accurate manner using sophisticated numerical algorithms for the solution of ordinary differential equations (ODEs). Solutions of the Navier–Stokes equations in primitive variables formulation by using the MOL and intelligent higher-order spatial discretization scheme are not available to date. © 1997 by John Wiley & Sons, Ltd.     

Estimate of the truncation error of finite volume discretization of the Navier–Stokes equations on colocated grids

A methodology is proposed for the calculation of the truncation error of finite volume discretizations of the incompressible Navier–Stokes equations on colocated grids. The truncation error is estimated by restricting the solution obtained on a given grid to a coarser grid and calculating the image of the discrete Navier–Stokes operator of the coarse grid on the restricted velocity and pressure field. The proposed methodology is not a new concept but its application to colocated finite volume discretizations of the incompressible Navier–Stokes equations is made possible by the introduction of a variant of the momentum interpolation technique for mass fluxes where the pressure part of the mass fluxes is not dependent on the coefficients of the linearized momentum equations. The theory presented is supported by a number of numerical experiments. The methodology is developed for two‐dimensional flows, but extension to three‐dimensional cases should not pose problems. Copyright © 2005 John Wiley & Sons, Ltd.     

An operator splitting numerical scheme for thermal/isothermal incompressible viscous flows

A numerical scheme for time‐dependent incompressible viscous fluid flow, thermally coupled under the Boussinesq approximation is presented. The scheme combines an operator splitting in the time discretization and linear finite elements in the space discretization, and is an extension of one previously applied for isothermal incompressible viscous flow governed by the Navier–Stokes equations. To show the efficiency of the scheme, numerical results are presented for mixed convection, and natural convection at high Rayleigh numbers. Restricting the scheme to the isothermal case, some numerical results at high Reynolds numbers are included, i.e. the scheme is tested for a small viscosity and a large force term, which are not trivial tasks to deal with. Copyright © 1999 John Wiley & Sons, Ltd.     

A complete boundary integral formulation for compressible Navier–Stokes equations

A complete boundary integral formulation for compressible Navier–Stokes equations with time discretization by operator splitting is developed using the fundamental solutions of the Helmholtz operator equation with different order. The numerical results for wall pressure and wall skin friction of two‐dimensional compressible laminar viscous flow around airfoils are in good agreement with field numerical methods. Copyright © 2004 John Wiley & Sons, Ltd.     

Least‐squares meshfree method for incompressible Navier–Stokes problems

A least‐squares meshfree method based on the first‐order velocity–pressure–vorticity formulation for two‐dimensional incompressible Navier–Stokes problem is presented. The convective term is linearized by successive substitution or Newton's method. The discretization of all governing equations is implemented by the least‐squares method. Equal‐order moving least‐squares approximation is employed with Gauss quadrature in the background cells. The boundary conditions are enforced by the penalty method. The matrix‐free element‐by‐element Jacobi preconditioned conjugate method is applied to solve the discretized linear systems. Cavity flow for steady Navier–Stokes problem and the flow over a square obstacle for time‐dependent Navier–Stokes problem are investigated for the presented least‐squares meshfree method. The effects of inaccurate integration on the accuracy of the solution are investigated. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical modelling of shear-dependent mass transfer in large arteries

A numerical scheme for the simulation of blood flow and transport processes in large arteries is presented. Blood flow is described by the unsteady 3D incompressible Navier–Stokes equations for Newtonian fluids; solute transport is modelled by the advection–diffusion equation. The resistance of the arterial wall to transmural transport is described by a shear-dependent wall permeability model. The finite element formulation of the Navier–Stokes equations is based on an operator-splitting method and implicit time discretization. The streamline upwind/Petrov–Galerkin (SUPG) method is applied for stabilization of the advective terms in the transport equation and in the flow equations. A numerical simulation is carried out for pulsatile mass transport in a 3D arterial bend to demonstrate the influence of arterial flow patterns on wall permeability characteristics and transmural mass transfer. The main result is a substantial wall flux reduction at the inner side of the curved region. © 1997 John Wiley & Sons, Ltd.     

The fundamental solution method for incompressible Navier–Stokes equations

A complete boundary integral formulation for incompressible Navier–Stokes equations with time discretization by operator splitting is developed using the fundamental solutions of the Helmholtz operator equation with different order. The numerical results for the lift and the drag hysteresis associated with a NACA0012 aerofoil oscillating in pitch show good agreement with available experimental data. © 1998 John Wiley & Sons, Ltd.     

Physics-informed neural networks (PINNs) for fluid mechanics: a review

Acta Mechanica Sinica - Despite the significant progress over the last 50 years in simulating flow problems using numerical discretization of the Navier–Stokes equations (NSE), we still...     

Navier–Stokes computation of transonic vortices over a round leading edge delta wing

A 3D Navier–Stokes solver has been developed to simulate laminar compressible flow over quadrilateral wings. The finite volume technique is employed for spatial discretization with a novel variant for the viscous fluxes. An explicit three-stage Runge–Kutta scheme is used for time integration, taking local time steps according to the linear stability condition derived for application to the Navier–Stokes equations. The code is applied to compute primary and secondary separation vortices at transonic speeds over a 65° swept delta wing with round leading edges and cropped tips. The results are compared with experimental data and Euler solutions, and Reynolds number effects are investigated.     

A General Approach to Time Periodic Incompressible Viscous Fluid Flow Problems

This article develops a general approach to time periodic incompressible fluid flow problems and semilinear evolution equations. It yields, on the one hand, a unified approach to various classical problems in incompressible fluid flow and, on the other hand, gives new results for periodic solutions to the Navier–Stokes–Oseen flow, the Navier–Stokes flow past rotating obstacles, and, in the geophysical setting, for Ornstein–Uhlenbeck and various diffusion equations with rough coefficients. The method is based on a combination of interpolation and topological arguments, as well as on the smoothing properties of the linearized equation.     

Localization of Hopf bifurcations in fluid flow problems

This paper is concerned with the precise localization of Hopf bifurcations in various fluid flow problems. This is when a stationary solution loses stability and often becomes periodic in time. The difficulty is to determine the critical Reynolds number where a pair of eigenvalues of the Jacobian matrix crosses the imaginary axis. This requires the computation of the eigenvalues (or at least some of them) of a large matrix resulting from the discretization of the incompressible Navier–Stokes equations. We thus present a method allowing the computation of the smallest eigenvalues, from which we can extract the one with the smallest real part. From the imaginary part of the critical eigenvalue we can deduce the fundamental frequency of the time-periodic solution. These computations are then confirmed by direct simulation of the time-dependent Navier–Stokes equations. © 1997 John Wiley & Sons, Ltd.     

On simulation of outflow boundary conditions in finite difference calculations for incompressible fluid

For incompressible Navier–Stokes equations in primitive variables, a method of setting absorbing outflow boundary conditions on an artificial boundary is considered. The advection equations used on the outflow boundary are convenient for finite difference (FD) methods, where a weak formulation of a problem is inapplicable. An unsteady viscous incompressible Navier–Stokes flow in a channel with a moving damper is modeled. An accurate comparison and analysis of numerical and mechanical situations are carried out for a variety of boundary conditions and Reynolds numbers. The proposed outflow conditions provide that the problem with Dirichlet boundary conditions should be solved on each time step.     

Effect of vertical grid variability on a free surface flow model

A previously developed numerical model that solves the incompressible, non‐hydrostatic, Navier–Stokes equations for free surface flow is analysed on a non‐uniform vertical grid. The equations are vertically transformed to the σ‐coordinate system and solved in a fractional step manner in which the pressure is computed implicitly by correcting the hydrostatic flow field to be divergence free. Numerical consistency, accuracy and efficiency are assessed with analytical methods and numerical experiments for a varying vertical grid discretization. Specific discretizations are proposed that attain greater accuracy and minimize computational effort when compared to a uniform vertical discretization. Published in 2007 by John Wiley & Sons, Ltd.     

Fourth‐order accurate compact‐difference discretization method for Helmholtz and incompressible Navier–Stokes equations

A fourth‐order accurate solution method for the three‐dimensional Helmholtz equations is described that is based on a compact finite‐difference stencil for the Laplace operator. Similar discretization methods for the Poisson equation have been presented by various researchers for Dirichlet boundary conditions. Here, the complicated issue of imposing Neumann boundary conditions is described in detail. The method is then applied to model Helmholtz problems to verify the accuracy of the discretization method. The implementation of the solution method is also described. The Helmholtz solver is used as the basis for a fourth‐order accurate solver for the incompressible Navier–Stokes equations. Numerical results obtained with this Navier–Stokes solver for the temporal evolution of a three‐dimensional instability in a counter‐rotating vortex pair are discussed. The time‐accurate Navier–Stokes simulations show the resolving properties of the developed discretization method and the correct prediction of the initial growth rate of the three‐dimensional instability in the vortex pair. Copyright © 2004 John Wiley & Sons, Ltd.     

A reduced‐order approach for optimal control of fluids using proper orthogonal decomposition

In this article, a reduced‐order modeling approach, suitable for active control of fluid dynamical systems, based on proper orthogonal decomposition (POD) is presented. The rationale behind the reduced‐order modeling is that numerical simulation of Navier–Stokes equations is still too costly for the purpose of optimization and control of unsteady flows. The possibility of obtaining reduced‐order models that reduce the computational complexity associated with the Navier–Stokes equations is examined while capturing the essential dynamics by using the POD. The POD allows the extraction of a reduced set of basis functions, perhaps just a few, from a computational or experimental database through an eigenvalue analysis. The solution is then obtained as a linear combination of this reduced set of basis functions by means of Galerkin projection. This makes it attractive for optimal control and estimation of systems governed by partial differential equations (PDEs). It is used here in active control of fluid flows governed by the Navier–Stokes equations. In particular, flow over a backward‐facing step is considered. Reduced‐order models/low‐dimensional dynamical models for this system are obtained using POD basis functions (global) from the finite element discretizations of the Navier–Stokes equations. Their effectiveness in flow control applications is shown on a recirculation control problem using blowing on the channel boundary. Implementational issues are discussed and numerical experiments are presented. Copyright © 2000 John Wiley & Sons, Ltd.     

Incompressible Roe‐like scheme for turbulent flows

In the current study, numerical investigation of incompressible turbulent flow is presented. By the artificial compressibility method, momentum and continuity equations are coupled. Considering Reynolds averaged Navier–Stokes equations, the Spalart–Allmaras turbulence model, which has accurate results in two‐dimensional problems, is used to calculate Reynolds stresses. For convective fluxes a Roe‐like scheme is proposed for the steady Reynolds averaged Navier–Stokes equations. Also, Jameson averaging method was implemented. In comparison, the proposed characteristics‐based upwind incompressible turbulent Roe‐like scheme, demonstrated very accurate results, high stability, and fast convergence. The fifth‐order Runge–Kutta scheme is used for time discretization. The local time stepping and implicit residual smoothing were applied as the convergence acceleration techniques. Suitable boundary conditions have been implemented considering flow behavior. The problem has been studied at high Reynolds numbers for cross flow around the horizontal circular cylinder and NACA0012 hydrofoil. Results were compared with those of others and a good agreement has been observed. Copyright © 2012 John Wiley & Sons, Ltd.     

Iterative solution techniques for the stokes and Navier-Stokes equations

The linear system arising from a Lagrange-Galerkin mixed finite element approximation of the Navier–Stokes and continuity equations is symmetric indefinite and has the same block structure as a system arising from a mixed finite element discretization of a Stokes problem. This paper considers the iterative solution of such a system, comparing the performance of the one-level preconditioned conjugate residual method for indefinite matrices with that of a more traditional two-level pressure correction approach. Asymptotic estimates for the amount of work involved in each method are given together with the results of related numerical experiments.     

Time‐related element‐free Taylor–Galerkin method with non‐splitting decoupling process for incompressible steady flow

The time‐related element‐free Taylor–Galerkin method with non‐splitting decoupling process (EFTG‐NSD) is proposed for the simulation of steady flows. The goal of the present paper is twofold. One is to raise the efficiency of the time‐related methods for solving steady flow problems, and the other is to obtain a good stability. The EFTG‐NSD method, which uses the time‐related Navier–Stokes equations to describe steady flows, does not care about the intermediate process and obtains solution of steady flows through time marching. Different from the classical time‐related fractional step methods, the EFTG‐NSD method decouples the Navier–Stokes equations without any operator‐splitting and correction. Because the elimination of correction at each iteration step reduces the computation cost, the EFTG‐NSD method possesses higher computation efficiency. In addition, the EFTG‐NSD method has a good stability due to the use of the Taylor–Galerkin formula in time and space discretization. Furthermore, the method combining element‐free Galerkin method with Taylor–Galerkin method is an important supplement of the element‐free Galerkin method for solving flow problems. Copyright © 2011 John Wiley & Sons, Ltd.     

On the efficiency of linearization schemes and coupled multigrid methods in the simulation of a 3D flow around a cylinder

This paper studies the efficiency of two ways to treat the non‐linear convective term in the time‐dependent incompressible Navier–Stokes equations and of two multigrid approaches for solving the arising linear algebraic saddle point problems. The Navier–Stokes equations are discretized by a second‐order implicit time stepping scheme and by inf–sup stable, higher order finite elements in space. The numerical studies are performed at a 3D flow around a cylinder. Copyright © 2005 John Wiley & Sons, Ltd.     

A local‐analytic‐based discretization procedure for the numerical solution of incompressible flows

An Erratum has been published for this article in International Journal for Numerical Methods in Fluids 2005, 49(8): 933. We present a local‐analytic‐based discretization procedure for the numerical solution of viscous fluid flows governed by the incompressible Navier–Stokes equations. The general procedure consists of building local interpolants obtained from local analytic solutions of the linear multi‐dimensional advection–diffusion equation, prototypical of the linearized momentum equations. In view of the local analytic behaviour, the resulting computational stencil and coefficient values are functions of the local flow conditions. The velocity–pressure coupling is achieved by a discrete projection method. Numerical examples in the form of well‐established verification and validation benchmarks are presented to demonstrate the capabilities of the formulation. The discretization procedure is implemented alongside the ability to treat embedded and non‐matching grids with relative motion. Of interest are flows at high Reynolds number, ??(10⁵)–??(10⁷), for which the formulation is found to be robust. Applications include flow past a circular cylinder undergoing vortex‐induced vibrations (VIV) at high Reynolds number. Copyright © 2005 John Wiley & Sons, Ltd.