sPS/PA6/蒙脱土纳米复合材料的制备与性能

讨论了间规聚苯乙烯 (sPS) 尼龙 6(PA6) 磺化间规聚苯乙烯 (SsPS H) 蒙脱土纳米复合材料的制备技术和新材料的结构与性能特征 .蒙脱土经层间改性处理后 (MTN) ,可分别将SsPS H和aPS(无规聚苯乙烯 )插入其纳米层间 ,制备出插层型纳米复合物MTN SsPS和MTN aPS .在sPS/PA6/SsPS H三组分共混体系中加入MTN SsPS或MTN aPS ,进行四组分熔融共混即可制备出sPS/PA6/SsPS H/蒙脱土纳米复合材料 .TEM测定证实了蒙脱土在基体中的层厚分布约为 5 0nm .此外 ,采用DSC、DMA、XRD及力学性能测试仪等现代分析方法对sPS/PA6/SsPS H/蒙脱土纳米复合材料的结构与性能进行了详细研究 .研究结果表明这种纳米复合材料具有优良的综合性能     

间规聚苯乙烯/尼龙6/磺化间规聚苯乙烯/蒙脱土纳米复合材料的研究

以磺化间规聚苯乙烯（SsPS)为增容剂，将间规聚苯乙烯（sPS)和尼龙6／改性蒙脱土纳米复合物（PA6－MTA）共混，得到综合性能优良的新型多组分聚合物／蒙脱土纳米复合材料（sPS/PA6/SsPS/MTA)。用DSC、DMA、WAXD及力学性能测试仪研究了纳米复合材料的结构与性能。TEM测定证明了蒙脱土在基体中的层厚分布为10－50nm。     

PU/MOMMT纳米复合材料的制备与研究

纳米复合材料由于其纳米尺寸效应，表面效应以及纳米粒子与基体界面间强的相互作用，具有优于相同组分常规复合材料的力学、热学等性能，引起了人们的广泛关注。用纳米材料改性聚合物，制备纳米复合材料是获得高性能高分子复合材料的重要方法。1998年以来，Pinnavaia等首先制备了聚氨酯，蒙脱土（PU／MMT）纳米复合材料，研究了有机蒙脱土在聚醚中的分散性。其后Chen等将聚羟基己内酯/蒙脱土（PCL／MMT）纳米复合材料加入到PCL和二苯基甲烷-4，4＇-二异氰酸酯（MDI）合成的预聚体与1，4-丁二醇扩链反应后的溶液中，制备了PU／MMT纳米复合材料。少量PCL／MMT的引入可使复合材料的综合性能大幅提高。     

双单体原位接枝插层法制备聚丙烯纳米复合材料的研究Ⅰ.制备、表征及力学性能的研究

用有机插层剂处理蒙脱土原土 ,制得有机蒙脱土 (O MMT) .采用双单体 (马来酸酐和苯乙烯 )原位接枝插层法 ,制备了聚丙烯 蒙脱土纳米复合材料母料 .将母料与聚丙烯基体在双螺杆上共混挤出 ,制得聚丙烯 蒙脱土纳米复合材料 (PP Montmorillonetenanocomposites,PMNC) .这是制备聚合物纳米复合材料的一种新方法 .通过X 射线衍射测试 (XRD)表明 ,有机蒙脱土片层 0 0 1面间距从原土的 1 4 9nm扩大到 2 96nm ,复合材料中蒙脱土片层 0 0 1面间距由有机蒙脱土的 2 96nm扩大到 4 0nm .力学性能测试表明 ,复合材料的力学性能明显优于PP基体 ,在提高材料拉伸强度的同时 ,缺口冲击强度也得到很大的提高 .用扫描电镜 (SEM)对材料的冲击断面形貌进行了研究 ,并从理论上分析了断裂机理 .随着蒙脱土含量的增加 ,冲击断裂形式逐渐从脆性断裂变成韧性断裂     

本质阻燃聚苯乙烯/蒙脱土纳米复合物的制备及性能

通过原位聚合法制备了本质阻燃聚苯乙烯[P(St-co-AEPPA)]/有机改性蒙脱土(OMMT)纳米复合物[P(St-co-AEPPA)/OMMT], 并用普通聚苯乙烯/有机改性蒙脱土(PS/OMMT)复合物作为对比实验, 研究了含磷、氮单体丙烯酸羟乙基-苯氧基-二乙基磷酰胺(AEPPA)和OMMT等添加物对本质阻燃聚苯乙烯性能的影响.用X射线衍射仪(XRD)和透射电子显微镜(TEM)分析了复合材料的结构与形貌, 并对OMMT在基体中的分散机理进行了讨论.用差示扫描量热仪(DSC)、热重分析(TGA)和微型量热仪(MCC)研究了材料的热性能和燃烧性能.结果表明, AEPPA和OMMT能够显著提高基体的热稳定性和阻燃性.     

尼龙6/蒙脱土纳米复合材料非等温结晶动力学和透明性研究

将有机化的蒙脱土与尼龙6(PA6)在Haake共混机中共混,制备出尼龙6/蒙脱土纳米复合材料(PA6N);对尼龙6/蒙脱土纳米复合材料和纯尼龙6分别进行差示扫描量热法非等温结晶试验,以了解蒙脱土在尼龙6/蒙脱土纳米复合材料中的成核作用、扩大尼龙6在包装领域的应用范围.与此同时,采用偏光显微镜测定了样品的结晶形态;采用紫...     

聚偏氟乙烯/蒙脱土纳米复合材料的形态结构

采用有机改性的蒙脱土与聚偏氟乙烯熔融共混, 制备了聚偏氟乙烯/蒙脱土纳米复合材料. 利用X射线衍射分析、透射电子显微镜(TEM)和Molau实验研究了复合材料的微观结构. 通过X射线衍射、傅里叶变换红外光谱(FTIR)以及差热扫描(DSC)研究了有机改性蒙脱土对聚偏氟乙烯结晶结构的影响. 结果表明, 有机改性蒙脱土在聚偏氟乙烯中以插层、剥离和碎片的形式存在. 在X射线衍射谱中发现蒙脱土的(001)峰向低角方向移动, 在TEM中可见到剥离的片层碎 片.蒙脱土的引入改变了聚偏氟乙烯的结晶结构, 导致了具有压电性能的β相形成, 引起α相内应力的产生, 同时也导致了聚偏氟乙烯基体的结晶度下降, 球晶尺寸随蒙脱土含量明显减少. 蒙脱土引起的β相在 160℃退火表明是相当稳定的. 根据这些实验结果, 对由于蒙脱土的引入引起的聚偏氟乙烯结晶结构的变化提出了可能的解释.     

甲苯-2,4-二异氰酸酯修饰蒙脱土及聚苯乙烯蒙脱土纳米复合材料的制备与表征

用FTIR和WAXD法研究了甲苯-2,4-二异氰酸酯(TDI)的邻位和对位异氰酸酯基团与蒙脱土表面羟基的修饰反应,在此基础上提出了结构模型;用TDI修饰后的蒙脱土成功制备了插层型聚苯乙烯/蒙脱土纳米复合材料,并用WAXD和TEM进行了表征.实验结果表明,修饰后TDI与蒙脱土表面形成化学键,使蒙脱土的片层间距显著增大,十六烷基三甲基溴化铵(CTAB)在蒙脱土层间由双层平行排列转变为双层脂肪链倾斜方式排列.在苯乙烯插层聚合过程中,蒙脱土层间距进一步扩大,其初级粒子在聚苯乙烯基体中的厚度约20～50nm.     

丁二烯/苯乙烯/4-乙烯基吡啶共聚物蒙脱土嵌入混杂材料的研究

用聚合物乳液与蒙脱土的水分散体共混共凝的方法制备混杂材料.在混合过程中乳胶粒与蒙脱土晶层相互穿插,用盐酸絮凝,带正电的共聚物能够嵌入带负电的蒙脱土层间.萃取实验发现在混杂材料中蒙脱土吸附了大量的共聚物,说明蒙脱土晶层与共聚物之间存在静电吸附作用.XRD实验发现在混杂材料中蒙脱土的晶层结构发生了膨胀,并且变得混乱,而在共混物中蒙脱土晶层结构几乎不变.用TEM观察在混杂材料中蒙脱土晶层均匀分散于共聚物基体中,蒙脱土的层间距大于6nm.共聚物嵌入蒙脱土的层间,受到蒙脱土晶层的限制作用,共聚物的T_g发生了变化.交联以后的混杂材料的性能比共聚物有了较大的提高,蒙脱土晶层在共聚物基体中起到很好的补强作用.     

羧甲基纤维素钠/蒙脱土纳米复合膜的制备及性能

用溶液插层法制备出了剥离型羧甲基纤维素钠 蒙脱土纳米复合物 .X射线衍射结果中蒙脱土d0 0 1 峰的消失证实了纳米复合物的生成 ,透射电镜观察表明硅酸盐片层在羧甲基纤维素钠基体中达到了纳米级的分散 .红外测试表明 ,羧甲基纤维素钠分子上的醚键和蒙脱土分子上的硅氧键、铝氧键之间强的作用力是插层的驱动力 .加入蒙脱土后 ,提高了羧甲基纤维素钠膜的拉伸强度、热稳定性 ,降低了其水蒸汽透过系数 .     

Dehydration of acetic acid by pervaporation using SPEK-C/PVA blend membranes

Sulfonated cardo polyetherketone (SPEK-C) and poly(vinyl alcohol) (PVA) blend membranes were prepared by solution casting method and used in pervaporation (PV) dehydration of acetic acid. The membranes were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and contact angle meter. The results show that thermal crosslinking occurred to the membrane under high temperature annealing. The effective d-spacing (inter-segmental spacing) decreased with PVA content decreasing. The hydrophilicity of the blend membrane increased with SPEK-C content increasing. Swelling and sorption experiments show that the swelling degree of the blend membrane increased, however both the sorption and diffusion selectivities decreased with increasing PVA content. The diffusion selectivity is higher than the sorption selectivity. This suggests that PV dehydration of acetic acid is dominated by the diffusion process. The pervaporation separation index (PSI) of the membrane increases with increasing PVA content and arrives at a maximum when the SPEK-C/PVA ratio is 3/2, then decreases with further addition of PVA. The membrane has an encouraging separation performance with a flux of 492 g m⁻² h⁻¹ and separation factor of 59.3 at 50 °C at the feed water content 10 wt%.     

聚乙烯醇/氟基蒙脱土纳米复合材料的合成及性能研究

采用水热方法,在493 K条件下反应72小时,合成了氟基蒙脱土(F-MMT),在这种F-MMT中,硅酸盐结构中的一些OH-被F-取代。采用溶液插层方法,制备了聚乙烯醇/F-MMT纳米复合材料(PVA/F-MMT)。采用X 射线衍射、扫描电镜和透射电镜对F-MMT 和 PVA/F-MMT纳米复合材料进行了表征;结果表明,片状结构的F-MMT均匀分散于PVA中,形成了层离结构的纳米复合材料。热重分析、力学性能和紫外可见光谱的测试结果表明,在没有牺牲光学性能情况下,PVA/F-MMT纳米复合材料的热稳定性和力学性能都得到了提高。力学和热学性能的提高归功于F-MMT均匀而好的分散于聚合物基体中,以及PVA中的 OH- 和F-MMT 中F-之间强的氢键作用。     

Effects of Electron Beam Irradiation on the Structural Properties of PVA/PAM/CMC Ternary Polymer Blends

Ternary miscible blends based on various ratios of poly(vinyl alcohol) (PVA), poly(acrylamide) (PAM) and carboxymethyl cellulose (CMC) were prepared by solution casting in the form of thin films. The structure‐property behavior of the ternary PVA/PAM/CMC blends, before and after they had been exposed to various doses of electron beam irradiation, was investigated by FT‐IR spectroscopy, SEM, XRD and stress‐strain curves. The visual observation showed that the cast films of the individual polymers PVA, PAM, and CMC and their blends over a wide range of composition are clear and transparent indicating the miscibility of PVA/PAM/CMC ternary blends. The FT‐IR analysis of pure polymers or their ternary blends before or after electron beam irradiation proved the formation of hydrogen bonding. In addition, it was found that the intensity of the different absorption bands depends on the ratio of PAM and CMC in the ternary blend. The XRD patterns showed that the peak position for the ternary blends decreases with increasing the ratio of CMC in the blend. However, the peak position for the ternary blend based on equal ratios of pure polymers was not affected by blending and was found in the same position as in the XRD pattern of pure PVA. The SEM micrographs give support to the visual observation indicating the complete miscibility of PVA/PAM/CMC ternary blends. The improvement in morphology leads to improvement in the tensile mechanical properties of the ternary polymer blends.     

Poly (caprolactone)/poly (ethylene glycol) pervaporation blend membranes: Synthesis,characterization, and performance

Poly (caprolactone) membranes with addition of different poly (ethylene glycol) concentrations were prepared for separation of water/isopropanol azeotropic mixture by pervaporation process. Different characterization tests including Fourier transform infrared, scanning electron microscopy, water contact angle, and thermogravimetric analysis were carried out on the prepared membranes. In addition, the effect of poly (ethylene glycol) PEG content on the swelling degree and the performance of the prepared membranes in pervaporation process were investigated. According to the obtained results, all the membranes were water selective and the blend membrane containing 3 wt% PEG exhibited the best pervaporation performance with a water flux of 0.517 kg/m² hour and separation factor of 1642 at the ambient temperature. Hydrophilicity improvement of the blend membranes was confirmed by constant decrease in water contact angle of the membranes as PEG content increased in the casting solution. Scanning electron microscopy cross‐sectional images indicated that the blend membranes containing PEG had a closed cellular structure. Furthermore, mechanical and thermal properties of the membranes decreased by adding PEG.     

Pervaporation dehydration of ethylene glycol with chitosan–poly(vinyl alcohol) blend membranes: Effect of CS–PVA blending ratios

Chitosan–poly(vinyl alcohol), CS–PVA, blended membranes were prepared by solution casting of varying proportions of CS and PVA. The blend membranes were then crosslinked interfacially with trimesoyl chloride (TMC)/hexane. The physiochemical properties of the blend membranes were determined using Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), tensile test and contact angle measurements. Results from ATR-FTIR show that TMC has crosslinked the blend membranes successfully, and results of XRD and DSC show a corresponding decrease in crystallinity and increase in melting point, respectively. The crosslinked CS–PVA blend membranes also show improved mechanical strength but lower flexibility in tensile testing as compared to uncrosslinked membranes. Contact angle results show that crosslinking has decreased the surface hydrophilicity of the blend membranes. The blend membrane properties, including contact angle, melting point and tensile strength, change with a variation in the blending ratio. They appear to reach a maximum when the CS content is at 75 wt%. In general, the crosslinked blend membranes show excellent stability during the pervaporation (PV) dehydration of ethylene glycol–water mixtures (10–90 wt% EG) at different temperatures (25–70 °C). At 70 °C, for 90 wt% EG in the feed mixture, the crosslinked blend membrane with 75 wt% CS shows the highest total flux of 0.46 kg/(m² h) and best selectivity of 986. The blending ratio of 75 wt% CS is recommended as the optimized ratio in the preparation of CS–PVA blend membranes for pervaporation dehydration of ethylene glycol.     

Effect of pullulan/poly(vinyl alcohol) blend system on the montmorillonite structure with property characterization of electrospun pullulan/poly(vinyl alcohol)/montmorillonite nanofibers

Nanofibers of the composite of pullulan (PULL), poly(vinyl alcohol) (PVA), and montmorillonite clay (MMT) were prepared using electrospinning method in aqueous solutions. Pullulan is an interesting natural polymer for many of its merits and good properties. Because of biocompatibility and non-toxicity of PVA, it could be used in numerous fields. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermal gravimetric analysis (TGA) were done to characterize the PULL/PVA/MMT nanofibers morphology and properties. XRD patterns and FTIR data demonstrated that there were good interactions between PULL and PVA caused by possibly hydrogen bonds. Moreover, XRD data and TEM images indicated that intercalated and exfoliated MMT nanoplatelets can be obtained within the PULL/PVA/MMT nanofibers depending on the PULL/PVA blend ratios. Furthermore, the thermal stability and mechanical property (tensile strength) of PULL/PVA/MMT nanofibers could be enhanced more by exfoliated MMT nanoplatelets than intercalated structures of that nanoplatelets.     

Preparation and characterization of silver-modified poly(vinyl alcohol)/polyethyleneimine hybrids as a chemical and biological protective material

Nanohybrid membranes based on the silver (Ag) and a poly(vinyl alcohol)/polyethyleneimine (PVA/PEI) blend were prepared by an in-situ reduction method, in which the silver nitrate, PVA and PEI acted as precursor, linker and polyamine reductant, respectively. The objective of the study was to develop and evaluate permeable membranes (PVA/PEI) impregnated with Ag nanoparticulates that can protect against simulants of chemical and biological warfare agents. The physical properties of the PVA/PEI-Ag hybrids were examined using SEM, TEM, TGA, and UV-vis spectroscopy, the results indicated that the Ag was incorporated in the PVA/PEI matrix after impregnation. The Ag content and surface morphology of the PVA/PEI-Ag hybrids depended on the initial concentration of AgNO₃. The chemical barrier properties against 2-chloroethyl-ethyl sulfide (CEES) were investigated based on static-diffusion method with gas chromatograph (GC). The antibacterial effects of the PVA/PEI-Ag hybrids were assessed by the zone of inhibition, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and plate-counting methods. The results of this study showed that PVA/PEI-Ag hybrids that act against simulants of chemical and biological weapons while retaining their ability to transmit moisture vapor could be obtained.     

淀粉-丙烯酸钠接枝共聚物的固体高分辨核磁共振研究

运用固体高分辨核磁共振技术,通过测量13C魔角旋转/交叉极化(CP/MAS)谱、1H自旋-晶格弛豫时间T1及旋转坐标系中的自旋-晶格弛豫时间T1ρ,对一系列淀粉-丙烯酸钠接枝共聚物的相结构进行了研究,并与淀粉、均聚丙烯酸钠及两者共混物的实验结果进行了比较.结果表明,接枝共聚导致了淀粉结晶度的明显降低;在共混物和接枝共聚物中,淀粉和聚丙烯酸钠组分都具有纳米尺度的相容性,由于接枝的效应,接枝共聚物中两个组分表现出比共混物更高的相容水平.     

Poly(vinylalcohol)/poly(ethyleneglycol)/poly(ethyleneimine) blend membranes - structure and CO2 facilitated transport

Poly(vinylalcohol) (PVA)/poly(ethyleneimine) (PEI)/poly(ethyleneglycol) (PEG) blend membranes were prepared by solution casting followed by solvent evaporation. The effects of the blend polymer composition on the membrane structure and CO₂/N₂ permeation characteristics were investigated. IR spectroscopy evidenced strong hydrogen bonding interactions between amorphous PVA and PEI, and weaker interactions between PVA and PEG. DSC studies showed that PVA crystallization was partially inhibited by the interactions between amorphous PVA and PEI blend, in which PEG separated into nodules. The CO₂ permeability decreased with an increase in CO₂ partial pressure in feed gas, while the N₂ permeability remained constant. This result indicated that only CO₂ was transported by the facilitated transport mechanism. The CO₂ and N₂ permeabilities increased monotonically with the PEI content in the blend membranes, whereas the ideal selectivity of CO₂ to N₂ transport showed a maximum. When CO₂ is humidified, its permeability through the blend membranes is much higher than that of dry CO₂, but the change in permeability due to the presence of humidity is reversible.     

高速搅拌对淀粉/聚乙烯醇共混物溶液成膜性能的影响

淀粉与聚乙烯醇（ＰＶＡ）溶液在高速搅拌下共混,可大大改善淀粉／ＰＶＡ共混薄膜的力学性能、透明性与耐水性,对其生物降解性有明显的影响．淀粉／ＰＶＡ共混体系在高速搅拌前后的光谱分析、显微观察、分子量及流变性能的测定表明,这些变化起因于高速搅拌增加了淀粉中直链淀粉的含量,同时提高了淀粉与ＰＶＡ共混溶液的稳定性,改善了淀粉／ＰＶＡ共混物薄膜的使用性能．