吗啡啉功能化酸性离子液体的合成、表征及其催化酯化性能

制备和表征了三种新型质子酸离子液体: 吗啡啉硫酸氢盐([Hnhm]HSO4)、4-甲基吗啡啉硫酸氢盐 ([Hnmm]HSO4)和SO3H-功能化的4-(3-磺丙基)吗啡啉硫酸氢盐([C3SO3Hnhm]HSO4). 以氯乙酸(CAA)和乙醇合成氯乙酸乙酯的酯化反应考察了它们的酸性和催化活性, 并与1-(3-磺酸基)丙基-3-甲基咪唑硫酸氢盐、1-(3-磺丙基)吡啶硫酸氢盐、1-(3-磺丙基)-2-吡咯烷酮硫酸氢盐等三种具有不同氮杂环的SO3H-功能化酸性离子液体以及浓硫酸相对照. 结果表明, 上述SO3H-功能化离子液体对酯化反应的催化性能比非SO3H-功能化的[Hnhm]HSO4和[Hnmm]HSO4都高, 等同甚至优于浓硫酸. 当反应条件为: n(EtOH)∶n(CAA)∶n([C3SO3Hnhm]HSO4)＝1.3∶1∶0.2, 反应温度80 ℃, 反应时间3 h, 酯收率可达93.4%. 而且离子液体经真空干燥重复使用9次, 催化活性仍无明显下降. 以[C3SO3Hnhm]HSO4催化乙酸和不同醇的酯化反应获得较高的酯收率和选择性, 离子液体跟酯产物均能自动分相. 还考察了SO3H-功能化酸性离子液体对奥氏体316不锈钢的腐蚀性. 尽管SO3H-功能化离子液体与硫酸的酸性相近, 但对钢试样的腐蚀率不到硫酸的1/3.     

Brönsted酸性离子液体催化酯化反应研究

合成了以2-吡咯烷酮和N-甲基咪唑为阳离子([Hnhp]＋和[Hmim]＋), , 和 为阴离子的一系列Brönsted酸性离子液体. 考察了这些离子液体的热稳定性和酸性. 以乙酸和异戊醇酯化合成乙酸异戊酯的反应考察了不同离子液体分别在不分水与分水条件下的催化效果, 结果表明, 不分水时, 当醇/酸/[Hnhp]HSO4物质的量比为1.2∶1∶0.2, 100 ℃下回流反应2 h, 酯收率可达93.6%, 反应结束后[Hnhp]HSO4体系可以顺利分相, [Hnhp]BF4则不能; 分水时, [Hnhp]BF4可与酯自动分相, 当醇/酸/[Hnhp]BF4物质的量比为1.2∶1∶0.01, 120 ℃下回流反应1.5 h时, 酯收率可达96.8%, 比相同条件下[Hnhp]HSO4的略高. 这两种体系中的离子液体均具有良好的重复使用性能. 实验中还探讨了不同离子液体的酸性和催化酯化反应后与酯产物的分相效果对其催化活性的影响, 结果表明, 离子液体的酸性和与酯的不可混溶性对其在不同体系中酯化反应的催化活性有不同程度的影响. 此外, 在上述不分水酯化条件(醇∶酸∶催化剂物质的量比均为1.2∶1∶0.2, 100 ℃油浴)下回流浸渍6 h比较离子液体[Hnhp]HSO4/BF4, [Hmim]HSO4/BF4和硫酸对奥氏体316不锈钢的腐蚀性, 测得离子液体腐蚀率比硫酸低; 除了[Hnhp]BF4, 离子液体[Hnhp]HSO4, [Hmim]HSO4和[Hmim]BF4的腐蚀性呈现随酸性递减而下降的趋势. 所测离子液体中[Hnhp]BF4腐蚀性最高. [Hnhp]BF4和硫酸中试样的腐蚀率分别为20.1和41.8 g/(m2•h).     

室温离子液体对氨基苯磺酸的萃取性能

系统研究了[C₄mim][PF₆], [C₆mim][PF₆], [C₆mim][BF₄]和[C₈mim][BF₄]室温离子液体对间氨基苯磺酸、对氨基苯磺酸稀水溶液的萃取平衡. 实验结果表明: 萃取温度和相体积比的变化对分配比影响不大; 水相pH值对萃取平衡有较大的影响, 氨基苯磺酸在离子液体/水体系中的分配比在pH＝4.2时达到最大值; 水相中CaCl₂或Na₂SO₄的存在能较大幅度地提高氨基苯磺酸的分配比; 离子液体的阴离子的性质对分配比有显著的影响, 阴离子为[BF₄]^－的离子液体对氨基苯磺酸的萃取能力大于阴离子为[PF₆]^－的离子液体; 咪唑环上烷基链的长度也对萃取效果有一定的影响. 在所研究的离子液体中, [C₆mim][BF₄]和[C₈mim][BF₄]对氨基苯磺酸有较好的萃取性能, 且萃取相中的氨基苯磺酸可回收利用, 离子液体也可循环使用.     

咪唑离子液体对铜在硫酸溶液中的缓蚀作用

采用动电位极化和电化学阻抗谱技术研究了三种新型烷基咪唑离子液体, 1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO₄), 1-已基-3-甲基咪唑硫酸氢盐([HMIM]HSO₄), 1-辛基-3-甲基咪唑硫酸氢盐([OMIM]HSO₄), 对铜在0.5 mol·L_-1 H₂SO₄溶液中的缓蚀作用. 实验结果表明: 咪唑离子液体能有效抑制铜在硫酸溶液中的腐蚀, 相同浓度下的缓蚀效率大小顺序为[OMIM]HSO₄>[HMIM]HSO₄>[BMIM]HSO₄. 动电位极化表明三种咪唑化合物的加入对铜的阴阳极腐蚀过程均有抑制作用, 属于混合型缓蚀剂. 电化学阻抗谱用带两个常相位原件的等效电路对含两个时间常数的体系进行拟合, 发现咪唑化合物的添加会引起电荷传递电阻和双电层电容等阻抗参数的变化, 表明此类化合物通过吸附于铜电极与溶液界面起到缓蚀作用, 且这种吸附符合Langmuir吸附等温关系. 吸附过程热力学计算说明咪唑化合物在铜表面发生了自发的物理吸附.     

酸功能化离子液体催化合成2-叔丁基蒽醌

以N-甲基咪唑、吡啶、1,4-丁烷磺内酯、对甲苯磺酸及硫酸为主要原料,经两步反应合成了4种酸功能化离子液体［MIM-BS］［TsO］(IL1)、 ［MIM BS］［HSO₄］(IL2)、 ［PY-BS］［TsO］(IL3)和［PY-BS］［HSO₄］(IL4),其结构和性能经¹H NMR, IR和TGA表征。以［MIM-BS］［TsO］为催化剂,催化2-(4-叔丁基苯甲酰基)苯甲酸(BB酸)合成2-叔丁基蒽醌,并对反应条件进行了优化。结果表明：IL1 0.4 g,n(IL)/n(BB酸)=0.5,于120 ℃反应9 h, 2-叔丁基蒽醌产率最高达90%,离子液体循环使用5次后催化活性无明显降低。     

A novel ligand-free palladium catalytic system with SO3H-functional ionic liquids as cocatalyst for amidocarbonylation reaction

Effects of Lewis acid BF3·OEt2, and BrCnsted acids TsOH, CF3COOH, H3PO4, and HCIO4 as cocatalyst respectively on the ligand-free palladium-catalyzed amidocarbonylation were investigated. SO3H-functional ionic liquids 1-methyl-3-（4-sulfonic acid）butylimidazolium hydrosulfate [MIm（CH2）4803H][HSO4] and 1-methyl-3-（4-sulfonic acid）butylimidazolium triflate [MIm（CH2）4SO3H][OTf] were firstly employed as cocatalysts instead of these Lewis acid and Brφnsted acids. By using a ligand-free and weak corrosive catalyst in situ prepared form PdBr2, LiBr.H2O, and [MIm（CH2）4SO3H][OTf], the arnidocarbo- nylation of benzaldehyde, acetamide, and CO could proceed smoothly and afford N-acetyl-α-phenylglycine with yield of 58% in [C6mim]PF6 medium.     

Brønsted acidic ionic liquids and their zwitterions: synthesis, characterization and pKa determination

Imidazolium chlorides with one or two carboxylic acid substituent groups, 1-methyl-3-alkylcarboxylic acid imidazolium chloride, [Me[(CH2)nCOOH]im]Cl (n=1, 3), and 1,3-dialkylcarboxylic acid imidazolium chloride, [[(CH2)nCOOH]2im]Cl (n=1, 3), have been synthesized via their corresponding acid esters. Deprotonation of the carboxylic acid functionalized imidazolium chlorides with triethylamine affords the corresponding zwitterions [Me[(CH2)nCOO]im] (n=1, 3) and [[(CH2)nCOOH][(CH2)nCOO]im] (n=1, 3). Subsequent reaction of the zwitterions with strong acids gives the new imidazolium salts [Me[(CH2)nCOOH]im]X (n=1, 3; X=BF4, CF3SO3) and [[(CH2)nCOOH]2im]X (n=1, 3; X=BF4, CF3SO3), which exhibit melting points as low as -61 degrees C. The solid-state structures of two of the carboxylic acid functionalized imidazolium salts have been determined by single-crystal X-ray diffraction analysis. Extensive hydrogen bonding is present between the chloride and the imidazolium, with eight Cl.H interactions below 3 A. The pK(a) values of all the salts, determined by potentiometric titration, lie between 1.33 and 4.59 at 25 degrees C.     

Alkylation of phenol with isopropanol over MCM-49 zeolites

Four novel Br?nsted acidic ionic liquids with two different acid sites on the imidazolium cations were synthesized and employed as catalysts and media in the esterification of acetonitrile with alcohols. The results showed that [HSO₃-pHim]HSO4 was the most efficient catalyst and medium which could be recycled easily without obvious decline in the catalytic activity.     

Preparation of fructone catalyzed by water-soluble Brφnsted acid ionic liquids

Fructone(2-methyl-2-ethylacetoacetate-1,3-dioxolane),a flavouring material,has been synthesized from ethyl acetoacetate and glycol using five water-soluble Br(?)nsted acid ionic liquids as catalysts for the first time.The used Br(?)nsted acid ionic liquids include [Hmim]Tfa,[Hmim]Tsa,[Hmim]BF_4,[Bmim]HSO4,[Bmim]H_2PO_4,and[Hmim]BF_4 showed the highest catalytic activity for the preparation of fructone.After reaction,the product could be isolated from the reaction system automatically,and the ionic liquid could be directly reused without dehydration.     

Fe3O4@MCM-48–SO3H:合成苯并[f]色烯并[2,3-d]嘧啶酮的高效、可磁性分离纳米催化剂（英文）

Sulfonic acid groups were grafted onto three different types of synthesized magnetic nanoparticles, namely Fe3O4, Fe3O4@SiO2, and Fe3O4@MCM‐48. The sulfonic acid‐functionalized nanoparticles were evaluated as catalysts for the synthesis of 5‐aryl‐1H‐benzo[f]chromeno[2,3‐d]pyrimidine‐2,4(3H,5H)‐dione derivatives in terms of activity and recyclability. Their catalytic activities were compared with that of the homogeneous acid catalyst 1‐methylimidazolium hydrogen sulfate ([HMIm][HSO4]). The activity of Fe3O4@MCM‐48–SO3H was comparable to those of the other heter‐ogeneous and homogeneous catalysts.     

The alcoholysis of acetonitrile prompted by Br(o)nsted acidic ionic liquid [HSO3-pmim]HSO4

Br(o)nsted acidic ionic liquids based on imidazolium cation were employed as a series of environmentally benign catalysts and mediums in the alcoholysis of acetonitrile to synthesize ester. The results showed that Br(o)nsted acidic ionic liquid [HSO3-pmim]HSO4 was an efficient catalyst and medium for the alcoholysis of acetonitrile which could be recycled easily without obvious decline in catalytic activity, the highest yield could reach 85%.     

新型酸性离子液体[hmim]hso4中合成乙酸酯

制备了一种新型B rφnsted酸性离子液体[Hm im]HSO4,用于乙酸与醇的酯化反应,通过简单的相分离就可以实现产物乙酸酯与离子液体的分离。考察了温度、时间、物料配比、离子液体用量等因素对乙酸与正丁醇的反应的影响,得出反应的最佳条件为:反应温度110℃,反应时间2 h,酸醇摩尔比为2,酸性离子液体[Hm im]HSO4与醇的体积比为1,乙酸正丁酯的产率为97%。离子液体重复使用5次,乙酸正丁酯的产率均大于94%。利用核磁共振、红外和元素分析测试技术对酸性离子液体[Hm im]HSO4的结构进行了表征,是以一水合物的形式存在。测定了不同浓度[Hm im]HSO4水溶液的酸强度数据,结果表明,其酸性明显高于酸性离子液体[Hm im]CF3COO的酸性。     

An efficient method to synthesize TNAD by the nitration of 1,4,5,8- tetraazabicyclo-[4,4,0]-decane with N20s and acidic ionic liquids

An experimental study was carried out on the direct nitration of 1,4,5,8-tetraaza-bicyclo-[4,4,0]-decane to synthesize 1,4,5,8-tetranitro-1,4,5,8-tetraazabicyclo-[4,4,0]-decane(TNAD) with N2O5 catalyzed by acidic ionic liquids. Various ionic liquids, such as [HMim]X, [(CH2)4SO3HMim]X and [Capl]X(X = pTSO, NO3, HSO4), and various parameters such as equivalents of ionic liquid, molar ratio of N2O5 to the starting material, reaction time and temperature, and solvent were investigated. Ionic liquid [(CH2)4SO3HMim]HSO4 showed better catalytic activity. In the presence of 3% molar ratio of [(CH2)4SO3HMim]HSO4 ionic liquid to the staring material, the yield of 1,4,5,8-tetranitro-1,4,5,8-tetraazabicyclo-[4,4,0]-decane was improved by 6.2% compared to the system without ionic liquid.     

离子液体催化剂用于煤焦化苯深度脱硫制无硫苯

从扩大有机合成用苯的需求出发,采用研制的离子液体催化剂考察了煤焦化苯深度脱硫制无硫苯的过程。结果表明：N-甲基咪唑硫酸氢盐[Hmim][HSO₄]离子液体催化剂脱噻吩效果与其酸函数值有关。本文采用Hammett指示剂测定离子液体的酸函数H₀,并得出：在-4至-12的范围,离子液体催化剂可以使煤焦化苯噻吩脱至0. 5mg/L以下。与固体酸催化机理相似,酸量和酸强度一定的离子液体催化剂通过Friedel-Crafts反应形成烷基噻吩等,与苯的物性拉开距离,对苯的分离精制是必不可少的,但是过多、过强的[Hmim][HSO₄]酸值也更有利于苯-噻吩-烯烃共聚合等副反应的发生,从而影响离子液体催化剂重复使用的寿命。本研究利用煤焦化苯脱硫反应形成的噻吩衍生物作为提供电荷流通的聚合物,将反复使用后性能不佳的离子液体成分等作为“受电子型”和“给电子型”的掺杂剂,进行导电（抗静电）材料的制备。结果显示：对煤焦化苯脱硫形成的噻吩衍生物等可以用于掺杂导电材料的试制。     

Performance and Mechanism of Alkylimidazolium Ionic Liquids as Corrosion Inhibitors for Copper in Sulfuric Acid Solution

The addition of corrosion inhibitors is an economic and environmental protection method to prevent the corrosion of copper. The adsorption, performance, and mechanism of three 1-alkyl-3-methylimidazolium hydrogen sulfate ([BMIM]HSO₄, [HMIM]HSO₄, and [OMIM]HSO₄) ionic liquids (ILs) on the copper surface in 0.5 M H₂SO₄ solutions were studied by quantum chemical calculation, quantitative structure-activity relationship (QSAR), and molecular dynamics simulation. It is found that the main reactive site is located on the imidazolium ring (especially the C2, N4, and N7 groups). When the alkyl chain of the imidazolium ring is increasing, the molecular reactivity of the ILs and the interaction between the ILs inhibitor and copper surface are enhanced. The imidazole ring of the ILs tends to be adsorbed on Cu (111) surface in parallel through physical adsorption. The order of adsorption energy is [Bmim]HSO₄ < [Hmim]HSO₄ < [OMIM]HSO₄, which is in agreement with the experimental order of corrosion efficiency. On the imidazole ring, the interaction between the copper surface and the C atom is greater than that between the copper surface and the N atom. It is found that ILs addition can hinder the diffusion of corrosion particles, reduce the number density of corrosion particles and slow down the corrosion rate. The order of inhibition ability of three ILs is [Bmim]HSO₄ < [Hmim]HSO₄ < [OMIM]HSO₄,which agree well with experimental results. A reliable QSAR correlation between the inhibition corrosion efficiency and molecular reactivity parameters of the ILs was established.     

Design of heterogeneous catalysts via multiple active site positioning in organic-inorganic hybrid materials

Catalytic materials bearing multiple sulfonic acid functional groups and positioned at varying distances from one another on the surface of mesoporous solids are prepared to explore the effects that the spatial arrangement of active sites have on catalytic activity and selectivity. A series of organosiloxane precursors containing either disulfide or sulfonate ester functionalities (synthons of the eventual sulfonic acid groups) are synthesized. From these molecular precursors, a variety of organic-inorganic hybrid, mesostructured SBA-15 silica materials are prepared using a postsynthetic grafting procedure that leads to disulfide and sulfonate ester modified silicas: [Si]CH(2)CH(2)CH(2)SS-pyridyl, 2.SBA, [Si]CH(2)CH(2)CH(2)SSCH(2)CH(2)CH(2)[Si], 3.SBA, [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OCH(2)CH(3), 4.SBA, and [Si]CH(2)CH(2)(C(6)H(4))(SO(2))OC(6)H(4)O(SO(2))(C(6)H(4))CH(2)CH(2)[Si], 6.SBA ([Si] = (tbd1;SiO)(x)()(RO)(3)(-)(x)()Si, where x = 1, 2). By subsequent chemical derivatization of the grafted species, thiol and sulfonic acid modified silicas are obtained. The materials are characterized by a variety of spectroscopic ((13)C and (29)Si CP MAS NMR, X-ray diffraction) and quantitative (TGA/DTA, elemental analysis, acid capacity titration) techniques. In all cases, the organic fragment of the precursor molecule is grafted onto the solid without measurable decomposition, and the precursors are, in general, attached to the surface of the mesoporous oxide by multiple siloxane bridges. The disulfide species 2.SBA and 3.SBA are reduced to the corresponding thiols 7.SBA and 8.SBA, respectively, and 4.SBA and 6.SBA are transformed to the aryl sulfonic acids 11.SBA and 12.SBA, respectively. 7.SBA and 8.SBA differ only in terms of the level of control of the spatial arrangement of the thiol groups. Both 7.SBA and 8.SBA are further modified by oxidation with hydrogen peroxide to produce the alkyl sulfonic acid modified materials 9.SBA and 10.SBA, respectively. The performances of the sulfonic acid containing SBA-15 silica materials (with the exception of 12.SBA) are tested as catalysts for the condensation reaction of phenol and acetone to bisphenol A. The alkyl sulfonic acid modified material 10.SBA derived from the cleavage and oxidation of the dipropyl disulfide modified material 3.SBA is more active than not only its monosite analogue 9.SBA, but also the presumably stronger acid aryl sulfonic acid material 11.SBA. It appears that a cooperative effect between two proximal functional groups may be operating in this reaction.     

Br?nsted酸性离子液体催化缩醛化反应合成聚甲氧基二烷基醚

聚甲氧基二烷基醚(RO(CH2O)nR)具有高的十六烷值(CN)和含氧量,能显著改善柴油的燃烧特性,有效提高热效率,大幅减少碳烟和NOx排放,被认为是一种优良的环保型燃油组分.随着–R基碳链的增长,CN值、热值和闪点逐渐增大,密度和冷凝点逐渐降低.同时,该类化合物具有优异的溶解及渗透性能,能与许多有机溶剂互溶,低毒,可以用作溶剂或颜料分散剂.近年来,聚甲氧基二甲基醚(CH3O(CH2O)nCH3,PODEn,DMMn)的制备及应用研究受到广泛关注,而对封端基团(–R)碳数大于1的多醚类化合物的研究鲜有文献报道.本文以Br?nsted酸性离子液体为催化剂,对甲醛和二乙氧基甲烷或脂肪醇(碳数 ≥2)缩醛化反应制备聚甲氧基二烷基醚的反应性能进行了研究,考察了离子液体结构和酸性对其催化性能的影响.结果表明,–SO3H功能化的离子液体[MIMBs]HSO4在催化三聚甲醛与二乙氧基甲烷的缩醛化反应中表现出最好的催化活性.考察了催化剂用量、原料配比、反应温度、反应压力和反应时间等因素对反应性能的影响,并得到了最佳反应条件,在n([MIMBs]HSO4):n(DEM1):n(HCHO)=1:80:80,140°C下反应4 h,甲醛转化率达到了92.6%,DEM2–8选择性为95.1%.考察了不同甲醛源(三聚甲醛和多聚甲醛)与提供封端基团化合物(二乙氧基甲烷、乙醇、丙醇和丁醇)的缩醛化反应.结果发现,在反应过程中不生成水或不引入水的条件下,具有更高的反应转化率和产物选择性.分别采用静置分层和萃取实现了催化剂的分离与重复使用.推测反应机理认为,三聚甲醛首先在氢键作用下分解生成甲醛单体,甲醛和二乙氧基甲烷通过碳正离子反应机理实现了DEMn的链增长.     

微波加热和常规加热下功能化离子液体催化合成丁二酸二辛酯

分别在微波辐射和常规加热下,以具有丙烷磺酸基功能基团的离子液体为催化剂催化丁二酸和正辛醇 合成丁二酸二辛酯,考察了其阴、阳离子对催化剂活性的影响.相比常规加热,微波加热提高了反应效率,缩短了反应时间.以[ PyPS]HSO4为催化剂,研究了催化剂用量、醇酸比和反应时间对酯化率的影响.结果表明:当催化剂用量为丁二酸的3wt％,酸醇比(丁二酸∶正辛醇)1∶4,反应温度150℃,反应时间15 min,功率400W时,酯化率达到95.74％.此外,微波辐射下[PyPS]HSO4催化剂重复使用6次后活性没有明显降低,酯化率仍有93.58％.     

多羧基咪唑离子液体的酸性表征

通过电位滴定法测得多羧基咪唑离子液体的离解常数pKa值(25 ℃)在1.43～1.92范围内, 说明多羧基咪唑离子液体酸性接近乙二酸, 比丁二酸以及乙酸强. 由于多羧基咪唑离子液体结构中咪唑环具有较强的吸电子诱导效应, 使多羧基咪唑离子液体具有中等强度的酸性. 三羧基咪唑离子液体酸性比含相同阴离子的二羧基咪唑离子液体酸性强. 阳离子相同、阴离子不同的多羧基咪唑离子液体酸性强弱顺序为: HSO4－ ＞ NO3－ ＞ PF6－ ＞ H2PO4－＞ Cl－、Br－ ＞ CF3CO2－ ＞ BF4－ ＞ CF3SO3－. 同时, 吡啶红外光谱探针法研究表明, 多羧基咪唑离子液体具有Brønsted酸性.     

7-Deazapurines: Synthesis of new pyrrolo[2,3-d]pyrimidin-4-ones catalyzed by a Brønsted-acid ionic liquid as a green and reusable catalyst

Some new 2-aryl-3,7-dihydro-4H-pyrrolo[2,3-d]pyrimidin-4-ones have been prepared through cyclocondensation of 2-amino-1H-pyrrole-3-carboxamides with aromatic aldehydes followed by air oxidation in the presence of 3-methyl-1-(4-sulfonic acid)butylimidazolium hydrogen sulfate [(CH2)4SO3HMIM][HSO4], a Brønsted-acidic ionic liquid (IL), as a green and reusable catalyst in solvent-free conditions.