Critical in vitro evaluation of responsive MRI contrast agents for calcium and zinc

The synthesis of two gadolinium(III) complexes that exhibit an increase in proton relaxivity in the presence of added Ca(2+) or Zn(2+) ions is reported. The complexes increase their hydration state from zero to one following metal-ion binding, confirmed by spectral measurements on the corresponding Eu(III) complexes. At a field of 1.4 T and 310 K, modulation of relaxivity of the order of 30-40% was observed in mouse serum in each case. The dissociation constants for Ca(2+) and Zn(2+) binding were sensitive to the presence of added bicarbonate, and were 450 μM (Ca(2+)) and 200 μM (Zn(2+)) in serum. Such systems may, therefore, be considered for use as magnetic resonance imaging (MRI) contrast agents to track the restoration of changes in metal-ion concentration in the cerebrospinal fluid of the brain, following neural stimulation.     

A highly selective turn-on colorimetric, red fluorescent sensor for detecting mobile zinc in living cells

We describe ZRL1, a turn-on colorimetric and red fluorescent zinc ion sensor. The Zn(2+)-promoted ring opening of the rhodamine spirolactam ring in ZRL1 evokes a 220-fold fluorescence turn-on response. In aqueous media, ZRL1 turn-on luminescence is highly selective for Zn(2+) ions, with no significant response to other competitive cations, including Na(+), K(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Cd(2+), or Hg(2+). In addition to these characteristics, preliminary results indicate that ZRL1 can be delivered to living cells and can be used to monitor changes in intracellular Zn(2+) levels.     

A novel,cell-permeable,fluorescent probe for ratiometric imaging of zinc ion

Zn(2+) plays important roles in various biological systems; as a result, the development of tools that can visualize chelatable Zn(2+) has attracted much attention recently. We report here newly synthesized fluorescent sensors for Zn(2+), ZnAF-Rs, whose excitation maximum is shifted by Zn(2+) under physiological conditions. Thus, these sensors enable ratiometric imaging, which is a technique to reduce artifacts by minimizing the influence of extraneous factors on the fluorescence of a probe. Ratiometric measurement can provide precise data, and some probes allow quantitative detection. ZnAF-Rs are the first ratiometric fluorescent sensors for Zn(2+) that enable quantitative analysis under physiological conditions. ZnAF-Rs also possess suitable K(d) for applications, and high selectivity against other biologically relevant cations, especially Ca(2+). Using these probes, changes of intracellular Zn(2+) concentration in cultured cells were monitored successfully. We believe that these probes will be extremely useful in studies on the biological functions of Zn(2+).     

Selective zinc sensor molecules with various affinities for Zn2+, revealing dynamics and regional distribution of synaptically released Zn2+ in hippocampal slices

We have developed a series of fluorescent Zn(2+) sensor molecules with distinct affinities for Zn(2+), because biological Zn(2+) concentrations vary over a wide range from sub-nanomolar to millimolar. The new sensors have K(d) values in the range of 10(-8)-10(-4) M, compared with 2.7 nM for ZnAF-2. They do not fluoresce in the presence of other biologically important metal ions such as calcium or magnesium, and they can detect Zn(2+) within 100 ms. In cultured cells, the fluorescence intensity of ZnAF-2 was saturated at low Zn(2+) concentration, while that of ZnAF-3 (K(d) = 0.79 muM) was not saturated even at relatively high Zn(2+) concentrations. In hippocampal slices, we measured synaptic release of Zn(2+) in response to high-potassium-induced depolarization. ZnAF-2 showed similar levels of fluorescence increase in dentate gyrus (DG), CA3 and CA1, which were indistinguishable. However, ZnAF-3 showed a fluorescence increase only in DG. Thus, by using a combination of sensor molecules, it was demonstrated for the first time that a higher Zn(2+) concentration is released in DG than in CA3 or CA1 and that we can easily visualize Zn(2+) concentration over a wide range. We believe that the use of various combinations of ZnAF family members will offer unprecedented versatility for fluorescence-microscopic imaging of Zn(2+) in biological applications.     

ZP8, a neuronal zinc sensor with improved dynamic range; imaging zinc in hippocampal slices with two-photon microscopy

The synthesis of a difluorofluorescein monocarboxaldehyde platform and its use for preparing ZP8, a new member of the Zinpyr family of neuronal Zn(2+) sensors, are described. By combining an aniline photoinduced electron transfer (PET) switch and an electron-withdrawing fluorescein scaffold, ZP8 displays reduced background fluorescence and improved dynamic range compared to previous ZP probes. The bright sensor undergoes an 11-fold increase in fluorescence intensity upon Zn(2+) complexation (Phi = 0.03-0.35) with high selectivity over cellular concentrations of Ca(2+) and Mg(2+). In addition, sensors in the ZP family have been utilized for optical imaging in biological samples using two-photon microscopy (TPM). The cell-permeable ZP3 probe is capable of identifying natural pools of labile Zn(2+) within the mossy fiber synapses of live hippocampal slices using TPM, establishing the application of this technique for monitoring endogenous Zn(2+) stores.     

Rational design of a minimal size sensor array for metal ion detection

The focus of this study was to demonstrate that, in the luminescent sensors, the signal transduction may possibly be the most important part in the sensing process. Rational design of fluorescent sensor arrays for cations utilizing extended conjugated chromophores attached to 8-hydroxyquinoline is reported. All of the optical sensors utilized in the arrays comprise the same 8-hydroxyquinoline (8-HQ) receptor and various conjugated chromophores to yield a different response to various metal cations. This is because the conjugated chromophores attached to the receptor are partially quenched in their resting state, and upon the cation coordination by the 8-HQ, the resulting metalloquinolinolate complex displays a change in fluorescence. A delicate balance of conjugation, fluorescence enhancement, energy transfer, and a heavy metal quenching effect results in a fingerprint-like pattern of responses for each sensor-cation complex. Principal component analysis (PCA) and linear discriminant analysis (LDA) are used to demonstrate the contribution of individual sensors within the array, information that may be used to design sensor arrays with the smallest number of sensor elements. This approach allows discriminating between 10 cations by as few as two or even one sensor element. Examples of arrays comprising various numbers of sensor elements and their utility in qualitative identification of Ca(2+), Mg(2+), Cd(2+), Hg(2+), Co(2+), Zn(2+), Cu(2+), Ni(2+), Al(3+), and Ga(3+) ions are presented. A two-member array was found to identify 11 analytes with 100% accuracy. Also the best two of the sensors were tested alone and both were found to be able to discriminate among the samples with 99% and 96% accuracy, respectively. To illustrate the utility of this approach to a real-world application, identification of enhanced soft drinks based on their Ca(2+), Mg(2+), and Zn(2+) cation content was performed. The same approach to reducing array elements was used to construct three- and two-member arrays capable of identifying these complex analytes with 100% accuracy.     

Poly(amine ester) dendrimer with naphthyl units as a fluorescent chemosensor for Al(III), Cu(II), and Zn(II).

A poly(amine ester) dendrimer with naphthyl units (G1N6) has been synthesized as a fluorescent chemosensor for metal ions. We investigated the metal-ion recognition of G1N6 by adding each of Ag(+), Al(3+), Ba(2+), Ca(2+), Cd(2+), Co(2+), Cu(2+), Fe(3+), Mg(2+), Ni(2+), and Zn(2+) in acetonitrile solution. Large changes were observed in the fluorescence spectra of G1N6 upon the addition of Al(3+), Cu(2+), and Zn(2+).     

Design and synthesis of a novel magnetic resonance imaging contrast agent for selective sensing of zinc ion

A series of new diethylenetriaminepentaacetic acid (DTPA)-bisamide chelators has been prepared and characterized for application as zinc sensors. We have designed and synthesized (GdL(a))(2-), which contains a DTPA-bisamide moiety. The R(1) relaxivity of (GdL(a))(2-) solution decreased monotonically on the addition of Zn(2+). Moreover, (GdL(a))(2-) showed high selectivity for Zn(2+) against Ca(2+) and Mg(2+). We also measured the UV-visible spectra and the coldspray ionization (CSI) MS spectra and concluded that the 1-to-1 Zn(2+) complex of (GdL(a))(2-) is stable at higher concentrations of Zn(2+). These complexes should provide the basis for creating a superior Zn(2+)-sensitive MRI contrast agent and are excellent candidates for incorporation into sensors designed for selective detection of Zn(2+) in biological applications.     

Development of a zinc ion-selective luminescent lanthanide chemosensor for biological applications

Detection of chelatable zinc (Zn(2+)) in biological studies has attracted much attention recently, because chelatable Zn(2+) plays important roles in many biological systems. Lanthanide complexes (Eu(3+), Tb(3+), etc.) have excellent spectroscopic properties for biological applications, such as long luminescence lifetimes of the order of milliseconds, a large Stoke's shift of >200 nm, and high water solubility. Herein, we present the design and synthesis of a novel lanthanide sensor molecule, [Eu-7], for detecting Zn(2+). This europium (Eu(3+)) complex employs a quinolyl ligand as both a chromophore and an acceptor for Zn(2+). Upon addition of Zn(2+) to a solution of [Eu-7], the luminescence of Eu(3+) is strongly enhanced, with high selectivity for Zn(2+) over other biologically relevant metal cations. One of the important advantages of [Eu-7] is that this complex can be excited with longer excitation wavelengths (around 340 nm) as compared with previously reported Zn(2+)-sensitive luminescent lamthanide sensors, whose excitation wavelength is at too high an energy level for biological applications. The usefulness of [Eu-7] for monitoring Zn(2+) changes in living HeLa cells was confirmed. This novel Zn(2+)-selective luminescent lanthanide chemosensor [Eu-7]should be an excellent lead compound for the development of a range of novel luminescent lanthanide chemosensors for biological applications.     

A 'turn-on' FRET peptide sensor based on the mercury binding protein MerP

A new fluorescent peptidyl chemosensor based on the mercury binding MerP protein with fluorescence resonance energy transfer (FRET) capabilities has been synthesized via Fmoc solid-phase peptide synthesis. The metal chelating unit, which is flanked by the fluorophores tryptophan (donor) and dansyl (acceptor), contains amino acids from MerP's metal binding loop (sequence: dansyl-Gly-Gly-Thr-Leu-Ala-Val-Pro-Gly-Met-Thr-Cys-Ala-Ala-Cys-Pro-Ile-Thr-Val-Lys-Lys-Gly-Gly-Trp-CONH(2)). A FRET enhancement or 'turn-on' response was observed for Hg(2+) as well as for Zn(2+), Cd(2+) and Ag(+) in a pure aqueous solution at pH 7.0. The emission intensity of the acceptor was used to monitor the concentration of these metals ions with detection limits of 280, 6, 103 and 496 microg L(-1), respectively. No response was observed for the other transition, alkali and alkaline earth metals tested. The fluorescent enhancement observed is unique for Hg(2+) since this metal generally quenches fluorescence. The acceptor fluorescence increase resulting from metal binding-induced FRET suggests a sensor that is inherently more sensitive than one based on quenching by the binding event.     

Reengineering of a fluorescent zinc sensor protein yields the first genetically encoded cadmium probe

Introduction of a (Cys)(4) metal binding site at the dimerization interface of two fluorescent protein domains yields a chelating FRET sensor protein that shows a 2500-fold selectivity for Cd(2+) over Zn(2+) by taking advantage of their different ionic radii.     

Reaction of metal-binding ligands with the zinc proteome: zinc sensors and N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine

The commonly used Zn(2+) sensors 6-methoxy-8-p-toluenesulfonamidoquinoline (TSQ) and Zinquin have been shown to image zinc proteins as a result of the formation of sensor-zinc-protein ternary adducts not Zn(TSQ)(2) or Zn(Zinquin)(2) complexes. The powerful, cell-permeant chelating agent N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine (TPEN) is also used in conjunction with these and other Zn(2+) sensors to validate that the observed fluorescence enhancement seen with the sensors depends on intracellular interaction with Zn(2+). We demonstrated that the kinetics of the reaction of TPEN with cells pretreated with TSQ or Zinquin was not consistent with its reaction with Zn(TSQ)(2) or Zn(Zinquin)(2). Instead, TPEN and other chelating agents extract between 25 and 35% of the Zn(2+) bound to the proteome, including zinc(2+) from zinc metallothionein, and thereby quench some, but not all, of the sensor-zinc-protein fluorescence. Another mechanism in which TPEN exchanges with TSQ or Zinquin to form TPEN-zinc-protein adducts found support in the reactions of TPEN with Zinquin-zinc-alcohol dehydrogenase. TPEN also removed one of the two Zn(2+) ions per monomer from zinc-alcohol dehydrogenase and zinc-alkaline phosphatase, consistent with its ligand substitution reactivity with the zinc proteome.     

Harnessing a ratiometric fluorescence output from a sensor array

Ratiometric fluorescence-based sensors are widely sought after because they can effectively convert even relatively small changes in optical output into a strong and easy-to-read signal. However, ratiometric sensor molecules are usually difficult to make. We present a proof-of-principle experiment that shows that efficient ratiometric sensing may be achieved by an array of two chromophores, one providing an on-to-off response and the second yielding an off-to-on response in a complementary fashion. In the case that both chromophores emit light of different color, the result is a switching of colors that may be utilized in the same way as from a true ratiometric probe. The chromophore array comprises two sensor elements: i) a polyurethane membrane with embedded N-anthracen-9-yl-methyl-N-7-nitrobenzoxa-[1,2,5]diazo-4-yl-N',N'-dimethylethylenediamine hydrochloride and ii) a membrane with N,N-dimethyl-N'-(9-methylanthracenyl)ethylenediamine. A combination of photoinduced electron transfer (PET) and fluorescence resonance energy transfer (FRET) allows for green-to-blue emission switching in the presence of Zn(II) ions. The sensing experiments carried out with different Zn(II) salts at controlled pH revealed that the degree of color switching in the individual sensor elements depends on both the presence of Zn(II) ions and the counter anion. These results suggest that sensing of both cations and anions may perhaps be extended to different cation-anion pairs.     

Fluorescent sensors for Zn(2+) based on a fluorescein platform: synthesis, properties and intracellular distribution

Two new fluorescent sensors for Zn(2+) that utilize fluorescein as a reporting group, Zinpyr-1 and Zinpyr-2, have been synthesized and characterized. Zinpyr-1 is prepared in one step via a Mannich reaction, and Zinpyr-2 is obtained in a multistep synthesis that utilizes 4',5'-fluorescein dicarboxaldehyde as a key intermediate. Both Zinpyr sensors have excitation and emission wavelengths in the visible range ( approximately 500 nm), dissociation constants (K(d1)) for Zn(2+) of <1 nM, quantum yields approaching unity (Phi = approximately 0.9), and cell permeability, making them well-suited for intracellular applications. A 3- to 5-fold fluorescent enhancement is observed under simulated physiological conditions corresponding to the binding of the Zn(2+) cation to the sensor, which inhibits a photoinduced electron transfer (PET) quenching pathway. The X-ray crystal structure of a 2:1 Zn(2+):Zinpyr-1 complex has also been solved, and is the first structurally characterized example of a complex of fluorescein substituted with metal binding ligands.     

Modulating affinities of di-2-picolylamine (DPA)-substituted quinoline sensors for zinc ions by varying pendant ligands

We have developed a series of di-2-picolylamine (DPA)-substituted quinoline sensors, HQ1- 4, bearing a pendant ligand at the 8 position of quinoline. UV-vis spectra of HQ1- 4 showed similar variations to that of HQ5 but with different varying extents upon the titration of zinc ions. Fluorescence intensities of HQ1, HQ3, and HQ4 were enhanced 4-6 times upon the addition of 1 equiv of zinc ions under an aqueous buffer. Somewhat unexpectedly, HQ2 is nonfluorescent in the presence of metal ions, including zinc ions. The affinities of HQ sensors are distributed in a broad range from nanomolarity to femtomolarity by varying the pendant ligands near the coordination unit. More importantly, these new sensors exhibited very high selectivity for Zn(2+) over Na(+), K(+), Mg(2+), and Ca(2+) at the millimolar level and over other transition metal ions at the micromolar level, except for Cd(2+). These findings indicated that the incorporations of the pendant groups exerted no effect on the spectroscopic properties and selectivity of the parent fluorescent sensor, with the exception of HQ2. Finally, X-ray crystal structures of ZnHQ's revealed that the auxiliary pendant groups at the 8 position participated in zinc coordination and were able to tune the affinities of HQ sensors.     

Development of a cholesterol-conjugated fluorescent sensor for site-specific detection of zinc ion at the plasma membrane

A cholesterol-conjugated fluorescence Zn(2+) sensor based on the fluorescein platform was designed and synthesized. The cholesterol moiety is essential for localizing the Zn(2+) sensor to the cell membrane, allowing the sensor to probe changes in the Zn(2+) concentration in a localized area of the cell.     

Analyte-driven switching of DNA charge transport: de novo creation of electronic sensors for an early lung cancer biomarker

A general approach is described for the de novo design and construction of aptamer-based electrochemical biosensors, for potentially any analyte of interest (ranging from small ligands to biological macromolecules). As a demonstration of the approach, we report the rapid development of a made-to-order electronic sensor for a newly reported early biomarker for lung cancer (CTAP III/NAP2). The steps include the in vitro selection and characterization of DNA aptamer sequences, design and biochemical testing of wholly DNA sensor constructs, and translation to a functional electrode-bound sensor format. The working principle of this distinct class of electronic biosensors is the enhancement of DNA-mediated charge transport in response to analyte binding. We first verify such analyte-responsive charge transport switching in solution, using biochemical methods; successful sensor variants were then immobilized on gold electrodes. We show that using these sensor-modified electrodes, CTAP III/NAP2 can be detected with both high specificity and sensitivity (K(d) ～1 nM) through a direct electrochemical reading. To investigate the underlying basis of analyte binding-induced conductivity switching, we carried out F?rster Resonance Energy Transfer (FRET) experiments. The FRET data establish that analyte binding-induced conductivity switching in these sensors results from very subtle structural/conformational changes, rather than large scale, global folding events. The implications of this finding are discussed with respect to possible charge transport switching mechanisms in electrode-bound sensors. Overall, the approach we describe here represents a unique design principle for aptamer-based electrochemical sensors; its application should enable rapid, on-demand access to a class of portable biosensors that offer robust, inexpensive, and operationally simplified alternatives to conventional antibody-based immunoassays.     

Photo-controlled metal-ion (Zn2+ and Cd2+) release in aqueous Tween-20 micelle solution

Photo-controlled metal-ion (Zn(2+) and Cd(2+)) release in aqueous micelle solution (tris-HCl, pH = 7.4) has been described using 2-((2-mercaptophenylimino)methyl) phenol as ligand. It is found that both the ligand-Zn complex (1) and the ligand-Cd complex (2) are stable in micelle solution, and Zn(2+) (Cd(2+)) can be released from the complex with 365 nm light trigger. Accompanying the metal-ion release, the ligand is photo-converted to 2-(benzothiazol-2-yl) phenol (3) as product, and the turn-on fluorescence is detected. The fluorescence intensity increases with the photo-triggered release until Zn(2+) (Cd(2+)) is completely released, which is beneficial for monitoring the process of photo-controlled metal ion release. Control experiments demonstrate that no binding occurs between 3 and Zn(2+) (Cd(2+)) in micelle solution and there is no binding between cations and micelle, either.     

Substituent-dependent fluorescent sensors for zinc ions based on carboxamidoquinoline

A series of carboxamidoquinoline-based fluorescent sensors (the AQZ family) were synthesized and characterized. The AQZ family members were highly soluble in water and showed good selectivity for Zn(2+)via enhanced fluorescence in aqueous buffer solution. Fluorescence signals could be tuned from dual-wavelength ratiometric changes to changes in the intensity of a single wavelength upon binding Zn(2+) through the introduction of different substituents onto the quinoline ring. Concentrations of free Zn(2+) of 10(-5)-10(-6) M could be detected using the sensors. Changes of substituents and their positions on the quinoline ring influenced the sensitivity for Zn(2+), but had little effect on Zn(2+) affinities.     

Pyrene excimer-based calix[4]arene FRET chemosensor for mercury(II)

A novel calix[4]arene derivative locked in the 1,3-alternate conformation (2) bearing two pyrene and rhodamine fluorophores was synthesized as a selective sensor for the Hg(2+) ion. The sensoring is based on FRET from pyrene excimer emissions to ring-opened rhodamine absorption upon complexation of the Hg(2+) ion. Addition of Hg(2+) to a mixed solution of 2 gave significantly enhanced fluorescence at ～576 nm via FRET with excitation at 343 nm. We also found that the pyrene excimer emissions formed by the intramolecular π-π interactions are more effective in obtaining strong FRET bands than those by intermolecular π-π interactions.