Determination of nicotine and its metabolite cotinine in urine and cigarette samples by capillary electrophoresis coupled with electrochemiluminescence

In this paper, CE coupled with electrochemiluminesence (ECL) detection using a 76‐μm Pt disk as working electrode was developed for nicotine (NIC) determination. The major metabolite of NIC is cotinine (COT), which has a similar tertiary amine structure to NIC. However, there is a carbonyl group attached in the structure of COT, which leads to the great decrease in ECL response. In order to improve the ECL response of COT, NaBH₄ was used for carbonyl reduction. After reduction, NIC and COT were separated and detected by CE‐ECL. ECL response plotted with NIC concentration was linear between 5.0×10^?7 and 5.0×10^?5 mol/L (81–8100 μg/L), with LOD of 5.0×10^?8 mol/L (8.1 μg/L). The developed CE‐ECL method was applied for NIC determination in urine and cigarette samples.     

Determination of enoxacin and ofloxacin by capillary electrophoresis with electrochemiluminescence detection in biofluids and drugs and its application to pharmacokinetics

A novel and sensitive method for the simultaneous determination of enoxacin and ofloxacin has been established using capillary electrophoresis (CE) coupled with electrochemiluminescence (ECL) detection based on the ECL enhancement of tri(2,2‐bipyridyl)ruthenium(II). The conditions for sample solvent type, CE separation and ECL detection were investigated systematically. The analytes were well separated and detected within 7 min. The limits of detection (S/N = 3) of enoxacin and ofloxacin are 9.0 × 10^?9 and 1.6 × 10^?8 mol/L, respectively. The precisions (RSD%) of intraday and interday are less than 2.1 and 4.0%, respectively. The limits of quantitation (S/N = 10) of enoxacin and ofloxacin are 3.2 × 10^?7 and 5.4 × 10^?7 mol/L in human urine samples and 4.1 × 10^?7 and 6.9 × 10^?7 mol/L in human serum samples, respectively. The recoveries of enoxacin and ofloxacin at different concentration levels in human urine, serum and eye drop samples are between 94.0 and 106.7%. The proposed method was successfully applied to the determination of the enoxacin and ofloxacin in human urine, serum and eye drop samples and the monitoring of pharmacokinetics of ofloxacin in human body. Copyright © 2009 John Wiley & Sons, Ltd.     

Simultaneous determination of methylephedrine and pseudoephedrine in human urine by CE with electrochemiluminescence detection and its application to pharmacokeinetics

A novel method for the determination of ephedra alkaloids (methylephedrine and pseudoephedrine) was developed by electrophoresis capillary (CE) separation and electrochemiluminesence detection (ECL). The use of ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate, BMIMBF₄) improved the detection sensitivity markedly. The conditions for CE separation, ECL detection and effect of ionic liquid were investigated in detail. The two ephedra alkaloids with very similar structures were well separated and detected under the optimum conditions. The limits of detection (signal‐to‐noise ratio = 3) in standard solution were 1.8 × 10^–8 mol/L for methylephedrine (ME) and 9.2 × 10^–9 mol/L for pseudoephedrine (PSE). The limits of quantitation (signal‐to‐noise ratio = 10) in human urine samples were 2.6 × 10^?7 mol/L for ME and 3.6 × 10^–7 mol/L for PSE. The recoveries of two alkaloids at three different concentration levels in human urine samples were between 81.7 and 105.0%. The proposed method was successfully applied to the determination of ME and PSE in human urine and the monitoring of pharmacokinetics for PSE. The proposed method has potential in therapeutic drug monitoring and clinical analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

Application of capillary electrophoresis coupling with electrochemiluminescence detection to estimate activity of leucine aminopeptidas

A new method to estimate the leucine aminopeptidase (LAP, EC 3.4.11.1) activity using capillary electrophoresis coupled with electrochemiluminescence (ECL) is described. The liberated proline produced by LAP catalyzing the hydrolysis reaction of leucin–proline was used as an ECL coreagent to enhance Ru(bpy)₃²⁺ ECL signals efficiently. The detection limit for proline was 2.88 × 10^?6 m (signal‐to‐noise ratio 3), which was equal to 9.60 × 10^?8 units of LAP being used to catalyze leucin–proline for 1 min. The Michaelis constant K_m (2.07 × 10^?2 mol/L) and the maximum reaction velocity V_max (1.06 × 10^?5 mol/L/min) of LAP for leucin–proline are reported. The reaction conditions including the concentration of metal ions, incubation temperature and pH were optimized. This method was successfully applied to detect LAP activity in plasma and the results were in good agreement with that obtained by the clinical method. Copyright © 2013 John Wiley & Sons, Ltd.     

Clopyralid detection by using a molecularly imprinted electrochemical luminescence sensor based on the “gate-controlled” effect

A new strategy for trace analysis was proposed by preparing a molecularly imprinted polymer (MIP) sensor. The template molecules of clopyralid were determined based on “gate-controlled” electrochemiluminescence (ECL) measurement. A dense polymer film was electropolymerized on an electrode surface to fabricate the MIP–ECL sensor. The process of template elution and rebinding acted as a gate to control the flux of probes, which pass through the cavities and react on the electrode surface. ECL measurement was conducted in the luminol–H₂O₂ system. A linear relationship between ECL intensity and clopyralid concentrations in the range of 1?×?10^?9 mol/L to 8?×?10^?7 mol/L exists, and the detection limit was 3.7?×?10^?10 mol/L. The prepared sensor was used to detect clopyralid in vegetables. Recoveries of 97.9 % to 102.9 % were obtained. The sensor showed highly selective recognition, high sensitivity, good stability, and reproducibility for clopyralid detection.     

Electrochemiluminescent Detection Method for Glyphosate in Soybean on Carbon Fiber-ionic Liquid Paste Electrode

A carbon fiber paste electrode using ionic liquid as the binder (CFILE) was fabricated. The electrochemical characteristics of the electrode was examined in ferro‐/ferricyanide solution and showed better conductivity and reversibility when compared with graphite paste‐ionic liquid electrode (GPILE) and a little better than that on the carbon nanotube paste‐ionic liquid electrode (CNTILE). Glyphosate (GLY), a pesticide, exhibited excellent catalysis to the oxidation of Ru(bpy)²⁺₃ on CFILE and brought an obvious enhancement to the electrochemiluminescence (ECL) intensity of Ru(bpy)²⁺₃. Based on the catalytic ability of GLY, a simple ECL method for GLY detection had been established. Under optimum conditions, the enhanced ECL intensities were found to had linearly respond to the GLY concentration between 3.0×10^?7 and 3.0×10^?5 mol/L, and the detection limit (S/N=3) was 2.0×10^?7 mol/L. The electrode also showed excellent sensitivity in detecting GLY‐spiked soybean samples. The linear range for GLY in soybean samples was 1.0×10^?6–4.0×10^?5 mol/L and the detection limit was 5.0×10^?7 mol/L, equal to 8.45 µg GLY in per gram of soybean. The detection limit in soybean sample was lower than the USA, EU regulation and so on. If the method is coupled with the separation technology, it can be applied to detect the GLY in the contaminated samples.     

Determination of Hg2+ in Tap Water Based on the Electrochemiluminescence of Ru(phen)32+ and Thymine at Bare and Graphene Oxide‐Modified Glassy Carbon Electrodes

The electrochemiluminescence (ECL) of the Ru(phen)₃²⁺/thymine (T) system at bare and graphene oxide (GO)‐modified glassy carbon (GC) electrodes was utilized to determine Hg²⁺ in tap water. The ECL intensity of Ru(phen)₃²⁺ was considerably enhanced by the addition of thymine because of the occurrence of ECL reaction between them. Subsequently, the ECL intensity of Ru(phen)₃²⁺/T system rapidly decreased with the addition of Hg²⁺ because of the formation of a T‐Hg²⁺‐T complex. A linear response (R²=0.9914) was obtained over a Hg²⁺ concentration range of 1.0×10^?9 mol/L to 1.0×10^?5 mol/L with a detection limit of 3.4×10^?10 mol/L at a bare GC electrode in 0.1 mol/L phosphate buffer (pH=8.0). The detection limit can be further reduced to 4.2×10^?12 mol/L after modification of the GC electrode by GO. To verify its applicability, the proposed method was utilized to determine Hg²⁺ in tap water and simulated wastewater. The method exhibited good reproducibility and stability and thus reveals the possibility of developing a novel ECL detection method for Hg²⁺.     

Capillary Electrophoresis Coupled with Electrochemiluminescence for the Facile Separation and Determination of Salbutamol and Clenbuterol in Urine

A capillary electrophoresis coupled with tris(2,2′‐bipyridyl) ruthenium(II) (Ru(bpy)₃²⁺) electrochemiluminescence detection system was developed to determine salbutamol and clenbuterol in urine. Some factors that affected the performances of separation and detection were investigated. Under the optimized conditions, one single quantitative analysis of salbutamol and clenbuterol was achieved at a separation voltage of 15 kV within 9 min, and the LODs (S/N=3) and LOQs (S/N=10) of salbutamol and clenbuterol were 8.43×10^?8 mol/L, 2.61×10^?7 mol/L and 2.73×10^?7 mol/L, 8.21×10^?7 mol/L, respectively. The recovery obtained from the analysis of spiked urine samples was between 88.6 % and 104.7 % with RSDs lower than 6.70 %. The method was successfully applied to determine salbutamol and clenbuterol in urine samples.     

Ultrasensitive Eletrogenerated Chemiluminescence Immunoassay by Magnetic Nanobead Amplification

An ultrasensitive electrogenerated chemiluminescence (ECL) immunoassay was proposed by using magnetic nanobeads (MNBs) as the carrier of ECL labels for ECL emission amplification. Carcinoembryonic antigen (CEA) and MNBs were initially immobilized on a platform in 1 : 1 molar ratio via sandwich immunoreaction. Subsequently, the MNBs were released from the platform and labeled with Ru(bpy)₃²⁺ species. After the MNBs with Ru(bpy)₃²⁺ were immobilized on an Au electrode, ECL of the Ru(bpy)₃²⁺ was measured for CEA determination. A linear relation between the ECL intensity and CEA concentration was obtained in a range of 1×10^?14 to 3×10^?13 mol/L (2.0 to 60 pg/mL) with a limit of detection of 8.0×10^?15 mol/L (1.6 pg/mL).     

Catalysis‐Electrochemical Detection of Horseradish Peroxidase at Zeptomole Level in Capillary Zone Electrophoresis

Capillary zone electrophoresis with catalysis‐electrochemical detection has been developed and applied to determining horseradish peroxidase (HRP) at zeptomole levels. In this method, an on‐line enzyme catalysis reactor with a reaction capillary was designed. Isoenzymes of HRP were separated by capillary zone electrophoresis, and then they catalyzed the enzyme substrate 3,3′,5,5′‐tetramethylbenzide (TMB(Red)) and H₂O₂ in the reaction capillary. The reaction product, TMB(Ox), could be determined using amperometric detection on a carbon fiber microdisk bundle electrode at the outlet of the reaction capillary. Because of enzyme amplification, a significant amount of TMB(Ox) could be produced for detection. Therefore, the limit of detection (LOD) of HRP is very low. The optimum conditions of the method are 1.5×10^?2 mol/L borate (pH 7.4) for the run buffer, 2×10^?3 mol/L for the concentration of H₂O₂, 2×10^?4 mol/L TMB(Red)+2.0×10^?2 mol/L citrate‐phosphate (pH 5.0) for the substrate solution, 40 cm for the liquid pressure height, 20 kV for the separation voltage, 100 mV for the detection potential. HRP could be measured with a detection limit of 4.8×10^?12 mol/L or 47.5 zmol (S/N=3). The linear range is from 2.40×10^?11 to 2.40×10^?8 mol/L. Using this method, commercial HRP was measured at zeptomole within ten minutes.     

Molecularly Imprinted Electrochemical Luminescence Sensor Based on Enzymatic Amplification for Ultratrace Isoproturon Determination

A new molecularly imprinted electrochemical luminescence sensor (MIP‐ECL sensor) was developed for isoproturon (IPU) determination based on the competition reaction between IPU and glucose oxidase labeled IPU (GOD‐IPU). After competition, hydrogen peroxide produced by residual GOD‐IPU on the MIP reacted with luminol to emit electrochemiluminescence (ECL) signal. The ECL intensity decreased when the GOD‐IPU molecules were replaced by IPU molecules in the samples. IPU could be determined in the concentration range from 9×10^?11 mol/L to 5.1×10^?9 mol/L with a detection limit of 3.78×10^?12 mol/L. Water samples were assayed and recoveries ranging from 98.5 % to 102.1 % were obtained.     

Highly Sensitive Electrogenerated Chemiluminescence Detecting Ranitidine Based On Chemically Modifying Microenvironment of the Chemiluminescence Reaction

Using a graphite electrode modified with vaseline and NiO, ranitidine showed a strongly ECL enhancing effect for the weak ECL signal of electrooxidation of luminol. Based on this finding, a more sensitive ECL method for ranitidine was firstly proposed. Under the optimum experimental conditions, the ranitidine hydrochloride concentration in the range of 3.0×10^?8–9.0×10^?6 mol/L was proportional to the enhancing ECL signal and offered a 9×10^?9 mol/L detection limit for ranitidine hydrochloride. At the same time, based on the investigation on this ECL reaction mechanism, a new concept, to improve the suitable ECL reaction micro‐environment with chemically modified electrode technique for the better analytical performances of ECL analysis was also firstly proposed.     

Electrochemical Detection of Methimazole by Capillary Electrophoresis at a Carbon Fiber Microdisk Electrode

We developed a sensitive, simple and low cost method to determine methimazole based on capillary electrophoresis with electrochemical detection (CE‐EC) at a carbon fiber microdisk electrode (CFE). We investigated the effects of detection potential, the concentration and pH value of the phosphate buffer, and injection time as well as separation voltage on the detection of methimazole. Under the optimized conditions: the detection potential at 1.30 V, 10 mmol/L phosphate buffer (pH 7.0), injection time 30 s at a height of 20 centimeter and separation voltage at 15 kV, the linear range was obtained from 1.0×10^?7 to 2.0×10^?4 mol/L, covering 3 orders of magnitude with a correlation coefficient of 0.9995. The LOD (S/N=3) obtained was 5.0×10^?8 mol/L. The RSD of migration time and peak current for 2.0×10^?4 mol/L methimazole was 1.04% and 1.54% (n=10), respectively. The method was also used to analyze methimazole tablets and human urine sample.     

Preparation of Luminol-doped Nanoparticle and Its Application in DNA Hybridization Analysis

Introduction The analysis of DNA sequence and DNA mutant detection play fundamental roles in the rapid development of molecular diagnostics and in the anticancer drug screening. Therefor many detection techniques of DNA sequence have been developed in recent years. These techniques mainly depend on the nucleic acid hybridization1 and their sensitivities are related to the specific activity of the label linked to the DNA probe. The degree of hybridization of probe to its complementary DN…     

Indirect Measurement of Yoctomole Alkaline Phosphatase by Capillary Electrophoresis with Electrochemical Detection

A method for indirectly detecting yoctomole (ymol) alkaline phosphatase was developed by capillary electrophoresis with electrochemical detection. In this method, disodium phenyl phosphate was used as the enzyme substrate and the product (phenol) of its hydrolysis reaction catalyzed by alkaline phosphatase was detected at the carbon fiber electrode. The optimum conditions of detection are 1.0×10^?2 mol/L Na₂B₄O₇ (pH 9.8) for the running buffer; 1.00×10^?3 mol/L disodium phenyl phosphate for the enzyme substrate; 20.0 kV for the separation voltage; 5 kV and 10 s for the injection voltage and injection time; 1.05 V (vs. saturated calomel electrode) for the detection potential and 10 min for the incubation time, respectively. In order to enhance the ratio of signal to noise, the shape and size of the working electrode, the shape of detection end of the capillary, and the capillary/electrode alignment method were studied in detail. When a single carbon fiber microcylinder electrode of 6 μm, a capillary of 10 μm ID with the etched detection end and the in‐capillary alignment were used, a ymol mass limit of detection for alkaline phosphatase was achieved.     

Determination of Gallic Acid by Flow Injection with Electrochemiluminescent Detection

ABSTRACT

Potential dependent inhibition and enhancement effects of gallic acid on the electrochemiluminescence (ECL) of luminol in alkaline solutions were found. On the basis of the enhancement effect, a flow injection method was developed for the determination of gallic acid. The method was simple, convenient and sensitive. A detection limit of 1.8×10^?8 mol/L, linear range of 3.0×10^?8 - 1.0×10^?4 mol/L, relative standard deviation of 1.0% for eleven measurements of 5.0×10^?6 mol/L of gallic acid was found. This method was successfully applied to determine the content of gallic acid in Chinese gall (moshizi).     

Electrochemiluminescence Biosensor for Glucose Based on Graphene/Nafion/GOD Film Modified Glassy Carbon Electrode

Glucose oxidase(GOD) was encapsulated in the Graphene/Nafion film modified glassy carbon electrode(GCE) and used as an ECL sensor for glucose. The GOD retains its bioactivity after being immobilized into the composite film. The sensor gives a linear response for glucose in the range of 2.0×10^?6–1.0×10^?4 mol/L with a detection limit of 1.0×10^?6 mol/L. The sensor showed good stability, the RSD for continuous scanning for 5.0×10^?5 mol/L glucose was 4.21 % (n=5). After being stored in 0.05 mol/L pH 7.4 PBS in 4 °C for two weeks, the modified electrode maintains 80 % of its initial activity. The glucose sensor provides new opportunity for clinical diagnosis applications.     

CE-electrochemiluminescence with ionic liquid for the facile separation and determination of diester-diterpenoid aconitum alkaloids in traditional Chinese herbal medicine

A CE‐electrochemiluminescence(CE‐ECL) detection system, CE/tris(2,2′‐bipyridyl) ruthenium(II)ECL with ionic liquid, was established for the determination of diester‐diterpenoid aconitum alkaloids (aconitine (AC), mesaconitine (MA) and hypaconitine (HA)) in traditional Chinese herbal medicine. Running buffer containing 25 mM borax‐20 mM 1‐ethyl‐3‐methylimidazolium tetrafluoroborate at pH 9.15 was used, which resulted in significant changes in separation and obvious enhancement in ECL intensity for AC, MA and HA with similar structures. End‐column detection was achieved in 50 mM phosphate buffer with 5 mM (pH 9.15) at applied detection voltage of 1.20 V when the distance between the Pt working electrode and outlet of capillary (50 cm×25 μm id) was set at 150 μm. One single quantitative analysis of three alkaloids was achieved at a separation voltage of 15 kV within 10 min. Moreover, two extraction processes (ethanol extraction and ethyl ether extraction after basification) were investigated. The result showed that ethanol extraction process has higher extraction efficiency than ethyl ether extraction process. Under the optimized conditions, the detection limits of AC, MA and HA were 5.62×10^?8, 2.78×10^?8 and 3.50×10^?9 mol/L (S/N=3), respectively. The method was successfully applied to determine the amounts of AC, MA and HA in the aconitum herbal samples.     

Direct Electrochemistry of Hemoglobin Entrapped in Composite Electrodeposited Chitosan‐Multiwall Carbon Nanotubes and Nanogold Particles Membrane and Its Electrocatalytic Application

Hemoglobin was entrapped in composite electrodeposited chitosan‐multiwall carbon nanotubes (MCNTs) film by assembling gold nanoparticles and hemoglobin step by step. In phosphate buffer solution (pH 7), a pair of well‐defined and quasireversible redox peaks appeared with formal potential at ?0.289 V and peak separation of 100 mV. The redox peaks respected for the direct electrochemistry of hemoglobin at the surface of chitosan‐MCNTs‐gold nanoparticles modified electrode. The parameters of experiments have also been optimized. The composite electrode showed excellent electrocatalysis to peroxide hydrogen and oxygen, the peak current was linearly proportional to H₂O₂ concentration in the range from 1×10^?6 mol/L to 4.7×10^?4 mol/L with a detection limit of 5.0×10^?7 mol/L, and this biosensor exhibited high stability, good reproducibility and better selectivity. The biosensor showed a Michaelis–Menten kinetic response as H₂O₂ concentration is larger than 5.0×10^?4 mol/L, the apparent Michaelis–Menten constant for hydrogen peroxide was calculated to be 1.61 μmol/L.     

Determination of idarubicin in human urine by capillary zone electrophoresis with amperometric detection

A simple, reliable and reproducible method, based on capillary zone electrophoresis with amperometric detection, has been developed for the determination of idarubicin in human urine. A carbon disk electrode was used as working electrode. The optimal conditions of separation and detection were pH 5.6 phosphate buffer ¶(0.20 mol/L), 22 kV for the separation voltage and 1.00 V (vs. Ag/AgCl, 3 mol/L KCl) for the detection potential. The linear range was from 4.0 × 10^–7 to 2.0 × 10^–5 mol/L with a regression coefficient of 0.9986, and the detection limit was 8.0 × 10^–8 mol/L. The method was directly applied to the determination of idarubicin in spiked human urine without any other sample pretreatment except filtration, and the assay results were satisfactory.