Liposome induced self-assembly of gold nanoparticles into hollow spheres

Gold nanoparticles were prepared by the reduction of [(C7H15)4N]+ [AuCl4]- with 3,4-ethylenedioxythiophene (EDOT) as reductant in toluene solution. The employed stabilizers include 3,3'-thiodipropionic acid (TDPA), 1-dodecanethiol (DDT), (+/-)-10-camphorsulfonic acid (CSA), and 11-mercaptoundecanoic acid (MUA). The reaction processes were tracked by UV-vis and FT-IR spectroscopy, and the as-prepared gold nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy, and X-ray photoelectron spectroscopy measurements. When TDPA and MUA, which possess both -S- and -COOH groups, were used as the stabilizer in the preparation, the as-prepared nanoparticles could self-assemble into hollow spheres. While when DDT with a -SH group or CSA with a -SO3H group was used as the protecting agents, only discrete gold nanoparticles were observed. The results show that the groups of both -S- and -COOH in the stabilizer play an important role in forming the hollow nanospheres. It is proposed that the formation mechanism of the hollow spheres is a liposome that formed between -COO- and [(C7H15)4 N]+ could act as a template to induce the self-assembly of the gold nanoparticles into the hollow spheres.     

Surface-enhanced Raman scattering of EDOT and PEDOT on silver and gold nanoparticles

Surface-enhanced Raman scattering (SERS) spectra of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its monomer 3,4-ethylenedioxythiophene (EDOT) on Ag and Au nanoparticles presenting different morphologies and stabilizing agents have been obtained using the excitation radiation at 633 nm. The SERS spectra of the monomer and polymer are strongly dependent both on the metal and capping agent of the substrate. SERS spectra of EDOT on Au nanospheres indicates that adsorption occurs with the thiophene ring perpendicular to the metal surface. In contrast, polymerization takes place on the silver surface of Ag nanospheres. EDOT adsorption on Ag nanoprisms with polyvinylpyrrolidone (PVP) as capping agent occurs similarly to that observed on gold. Surface-enhanced resonance Raman scattering (SERRS) spectra of PEDOT on gold nanostars that present a thick layer of PVP show no chemical interaction of PEDOT with the metal surface; however, when PEDOT is adsorbed on citrate stabilized gold nanospheres, the SERRS spectra suggest that thiophene rings are perpendicular to the surface. Oxidation of PEDOT also is observed on Ag nanospheres. The investigation of the interface between PEDOT and metal surface is crucial for the development in polymer-based optoelectronic devices since this interface plays a crucial role in their stability and performance.     

Nanoscale actuation of thermoreversible polymer brushes coupled with localized surface plasmon resonance of gold nanoparticles

This paper describes the fabrication of hybrid nanoassemblies with polymer brushes and gold nanoparticles enabling detection of nanoscale optical changes based on localized surface plasmon resonance. The reversible and thermosensitive nanoscale actuation is achieved by combining stimuli-responsive polymer brushes and gold nanoparticles independently and selectively assembled on substrates. These hybrid nanoassemblies are assembled on numerous substrates and will be applicable for optoelectronics, nanoactuator, and nanosensor applications.     

Direct facile approach to the fabrication of chitosan-gold hybrid nanospheres

Chitosan-gold hybrid nanospheres were prepared through a direct facile approach that utilized cross-linked composite nanospheres consisting of low-molecular-weight chitosan (LWCS) and ethylenediaminetetraacetic acid (EDTA) as a precursor reaction system. EDTA was employed not only to construct the counterion interaction-based composite nanospheres with the cationic chitosan but also as the reductant for subsequent in situ gold salt reduction within the LWCS-EDTA composite nanospheres. This approach elegantly ensured that each and every nanosphere was loaded with gold nanoparticles and no nonembedded free gold nanoparticles would exist in the dispersing medium. Moreover, becauseof the noncovalent interaction between LWCS and EDTA, the EDTA reductant can be easily removed from the cross-linked nanospheres, and "pure" chitosan-gold hybrid nanospheres can be obtained. The obtained chitosan-gold hybrid nanospheres were found to have a tunable size and good dispersing stability within a wide pH range. The embedded gold nanoparticles were in the range from several to several tens of nanometers, which may be useful for sensing and imaging. Morphology studies indicated that most of the loaded gold nanoparticles were located in the interior of the hybrid nanospheres. Taking into account the good biocompatibilities of LWCS, abundant functional (amino) groups in chitosan, and the mild preparation conditions, we find that the chitosan-gold hybrid nanospheres prepared here may have tremendous potential in advanced biomedical applications.     

Electrochemical detection of amino acids based on cucurbit[7]uril-mediated three-dimensional gold nanoassemblies

In this paper, cucurbit[7]uril (CB[7])-mediated three-dimensional gold nanoassemblies were successfully prepared to increase the loaded amount of CB[7] and enhance the electrochemical detection of amino acids. Particle sizes of gold nanoparticles (AuNPs) significantly affect stability and detection sensitivity of nanoassemblies. The volume of gold nanoassemblies first increased and then decreased with the increase of CB[7] concentration. The 3D gold nanoassemblies composed of 16 nm AuNPs and 100 µmol/L CB[7] had excellent stability and maximum volume, exhibiting more sensitive detection for a variety of amino acids. And the detection limits of aromatic amino acids are lower in virtue of the higher binding constant between aromatic amino acids and CB[7]. This study will develop and deepen our understanding of molecular recognition in amino acids detection.     

Green preparation of hollow mesoporous silica nanosphere inside-loaded gold nanoparticles and the catalytic activity

In this work, an active nano-catalyst with gold nanoparticles loaded in hollow mesoporous silica nanospheres (HMSNs/Au) was prepared by a one-pot sol-gel method, in which gold ions were loaded in hollow mesoporous silica spheres followed by sodium alginate reduction. The characterization of the HMSNs/Au were determined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption–desorption isotherms (BET). The high catalytic activity of HMSNs/Au, denoted as apparent turn-over frequency (TOF), was detected by UV-Vis spectrophotometer for the catalytic reduction of 4-nitrophenol (74.5 h^?1) and 2-nitrophenol (108.7 h^?1) in the presence of sodium borohydride solution due to the small gold nanoparticles size and overall exposure of active sites. It is expected that this ecofriendly approach to prepare inorganic composited nanoparticles as high active catalysts based on hollow mesoporous materials was a promising platform for loading noble metal nanoparticles.     

Gold hollow nanospheres: tunable surface plasmon resonance controlled by interior-cavity sizes

Uniform gold hollow nanospheres with tunable interior-cavity sizes were fabricated by using Co nanoparticles as sacrificial templates and varying the stoichiometric ratio of starting material HAuCl4 over the reductants. The formation of these hollow nanostructures is attributed to two subsequent reduction reactions: the initial reduction of HAuCl4 by Co nanoparticles, followed by the reduction by NaBH4. In addition, a thick layer of silica was successfully coated onto the gold hollow nanospheres. These nanostructures are extensively characterized by TEM, XRD, HRTEM, SEM, electron diffraction, energy-dispersive X-ray analysis, and UV-visible absorption spectroscopy. It is evident that the SPR peak locations corresponding to these hollow nanospheres are shifted over a region of more than 100 nm wavelength due to changes of shell thickness, which make these optically active nanostructures of great interest in both fundamental research and practical applications.     

二氧化铈纳米球的合成

使用尿素水热法合成了均匀的二氧化铈球型纳米材料.纳米球是由纳米层以及纳米颗粒所构成的核壳结构,其平均粒径为320nm,同时表面主要暴露{111}晶面.尿素水解所产生的氨气分子为纳米球状结构的形成提供了模板,而生成的碳酸根与氢氧根离子作为铈离子的沉淀剂.使用氢气程序升温还原技术表征了氧化铈纳米球材料的氧化还原能力,同时以一氧化碳氧化为探针反应研究了其催化性能.     

Meso-substituted porphyrin photosensitizers with enhanced near-infrared absorption: Synthesis,characterization and biological evaluation for photodynamic therapy

Porphyrin derivatives are widely explored and used in photodynamic therapy, for their marvelous therapeutic properties. In order to fill in the gaps of insufficient photosensitizers with near-infrared absorption, three porphyrin molecules, 5,10,15,20-tetrakis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)zinc porphyrin(P1), 5,15-bis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)-10,20-bis(2-(2-(2-(4-ethynylphenoxy)ethoxy)ethoxy)ethanol)zincporphyrin(P2),5,15-bis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)-10,20-N,N-dibutyl-4-ethynylaniline zinc porphyrin(P3), were designed and synthesized targeting for more efficient cancer treatment. Excellent photophysical properties were illustrated by UV–vis absorption and emission spectra with enhanced absorbance between 650 and 750?nm and fluorescence emission within 600–800?nm. Besides, with high ¹O₂ quantum yield, especially P2 (0.89), all porphyrins were further evaluated in vitro by 3-(4, 5-dimethyl-2-thiazolyl)-2, 5-diphenyl-2-H-tetrazolium bromide (MTT) assay against Hela cells and exhibited negligible dark toxicity and robust phototoxicity. Fluorescence confocal laser microscopy confirmed cellular uptake and diffusion of these porphyrins, therefore demonstrated their potential and promising applications in photodynamic therapy.     

Organic-inorganic nanohybrids via directly grafting gold nanoparticles onto conjugated copolymers through the Diels-Alder reaction

Nanocomposites of poly- p-phenyleneethynylene gold nanoparticles (PPE-Au) were synthesized via directly grafting maleimide functionalized gold nanoparticles (MA-Au) onto PPE chains by a mild Diels-Alder reaction. The Diels-Alder reaction between copolymers and MA-Au leads to self-assembly of the MA-Au as well as enhances electronic communication between the copolymers and inorganic particles. The as-prepared hybrid nanoassemblies show homogeneous status and well-defined interfaces, which facilitate the electronic interaction between conjugated polymers and gold nanoparticles. Moreover, dramatic photophysical properties and an influence on the assembly behavior of gold nanoparticles are also exhibited, which allows this procedure to be performed as a smart assay for monitoring the process of the Diels-Alder reaction.     

Synthesis and ion-selective properties of 1,2-bis[2-((2-diphenylphosphorylmethyl)phenoxy)ethoxy]cyclohexane (L) and its structural analogs. Crystal structure of L

Potentially hexadentate phosphoryl podands 1,2-bis[2-((2-diphenylphosphorylmethyl)phenoxy) ethoxy]cyclohexane (L), 1,2-bis[2-((2-diphenylphosphoryl)phenoxy)ethoxy]cyclohexane (L¹), and 1,2-bis[2-((2-diphenylphosphorylmethyl)phenoxy)ethoxy]benzene (L²) are synthesized. Stability constants of complexes formed by L, L¹, and L² with alkali-metal 2,4-dinitrophenolates in mixed THF—CHCl₃ solutions (4: 1 by volume) are determined. Electroanalytical characteristics of ion-selective electrodes with hexadentate phosphoryl podands having different structures used as active components of their plasticized membranes are compared for cations of alkali and alkaline-earth metals. The IR spectra are described. The crystal structure of L is studied by X-ray diffraction.     

Vapochromic behavior of {Ag2(Et2O)2[Au(C6F5)2]2}n with volatile organic compounds

The vapochromic behaviors of {Ag2L2[Au(C6F5)2]2}n (L = Et2O (1), Me2CO (2), THF (3), CH3CN (4)) were studied. {Ag2L2[Au(C6F5)2]2}n (L = Et2O (1)) was synthesized by the reaction of [Bu4N][Au(C6F5)2] with AgOClO3 in 1:1 molar ratio in CH2Cl2/Et2O (1:2). 1 was used as starting material with THF to form {Ag2L2[Au(C6F5)2]2}n (L = THF (3)). 3 crystallizes in the monoclinic space group C2/c and consists of tetranuclear units linked together via aurophilic contacts resulting in the formation of a 1D polymer that runs parallel to the crystallographic z axis. The gold(I) atoms are linearly coordinated to two pentafluorophenyl groups and display additional Au...Ag close contacts within the tetranuclear units with distances of 2.7582(3) and 2.7709(3) A. Each silver(I) center is bonded to the two oxygen atoms of the THF molecules with a Ag-O bond distance of 2.307(3) A. TGA analysis showed that 1 loses two molecules of the coordinated solvent per molecular unit (1st one: 75-100 degrees, second one: 150-175 degrees C), whereas 2, 3, and 4 lose both volatile organic compounds (VOCs) and fluorinated ligands in a less well defined manner. Each complex loses both the fluorinated ligands and the VOCs by a temperature of about 325 degrees C to give a 1:1 gold/silver product. X-ray powder diffraction studies confirm that the reaction of vapors of VOCs with 1 in the solid state produce complete substitution of the ether molecules by the new VOC. The VOCs are replaced in the order CH3CN > Me2CO > THF > Et2O, with the ether being the easiest to replace. {Ag2(Et2O)2[Au(C6F5)2]2}n and {Ag2(THF)2[Au(C6F5)2]2} n both luminesce at room temperature and at 77 K in the solid state. Emission maxima are independent of the excitation wavelength used below about 500 nm. Emission maxima are obtained at 585 nm (ether) and 544 nm (THF) at room temperature and at 605 nm (ether) and 567 nm (THF) at 77 K.     

Synthesis of Ag-SiO2 composite nanospheres and their catalytic activity

A simple,mild,and time-saving method is employed to synthesize Ag-SiO2 composite nanospheres with Ag nanoparticles uniformly distributed on the surface of SiO2 nanoparticles.The chemical elements and the morphology of Ag-SiO2 composite nanospheres were analyzed with transmission electron microscopy(TEM),X-ray power diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).On the surface of Ag-SiO2 composite nanospheres,silane coupling agent(KH-550)is introduced as an intermediary to connect the surfaces of SiO2 nanospheres and Ag nanoparticles,which is also helpful for avoiding the aggregation of Ag nanoparticles.It is found that Ag-SiO2 composite nanospheres have very good catalytic properties for the reduction of organic dyes,which may have potential application in wastewater treatment.     

Syntheses, X-ray structures and AACVD studies of group 11 ditelluroimidodiphosphinate complexes

Reactions of Na(tmeda)[N((i)Pr(2)PTe)(2)] with CuCl, AgI or AuCl (in the presence of PPh(3)) in THF produced the coinage metal ditelluroimidodiphosphinate complexes {Cu[N((i)Pr(2)PTe)(2)]}(3), (5), {Ag[N((i)Pr(2)PTe)(2)]}(6) (6) and Au(PPh(3))[N((i)Pr(2)PTe)(2)] (7), respectively. Complexes 5, 6 and 7 were characterized in the solid state by X-ray crystallography. Complex 5 is trimeric and exhibits a highly distorted Cu(3)Te(3) ring. In contrast, the Ag(I) complex 6 is a hexamer, and forms a twelve-membered Ag(6)Te(6) ring. The replacement of the (i)Pr groups on phosphorus by Ph results in an intriguing structural change to a tetramer with a boat-shaped Ag(4)Te(4) ring in {Ag[N(Ph(2)PTe)(2)}(4).2THF (8). The gold(I) complex 7 is monomeric. Aerosol-assisted chemical vapour deposition (AACVD) of compounds 5, 6 and 7 yields CuTe, Ag(7)Te(4), AuTe(2) and Au films, respectively. The films were grown at temperatures of 300-500 degrees C and characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive analysis of X-rays (EDAX).     

4,5-Bis(diphenylthiophosphinoyl)-1,2,3-triazolate interaction with gold nanoparticles and flat surfaces to form self-assembled monolayers

The interaction of the 4,5-bis(diphenylthiophosphinoyl)-1,2,3-triazolate (SPTz⁻) with different gold surfaces was investigated (nanoparticles, an electrode, and flat sheets). Studies on binding affinity of this dithiophosphin-triazolate on a gold electrode were performed by cyclic voltammetry (CV). Voltammograms exhibit two reductive desorption and only one oxidative readsorption, indicating that once reabsorbed, the molecule achieves a unique conformation. The morphology and average size of modified gold nanoparticles were studied by transmission electron microscopy (TEM) (av. diameter of 5.9 ± 1.8 nm). Further characterization was made by UV-visible (UV-vis) spectroscopy showing surface plasmon resonance (SPR) at about 580 nm. The bonding configurations of SPTz⁻ on gold have also been investigated by comparing the FT-IR and FT-Raman spectra. The ³¹P{¹H} NMR spectrum of capped nanoparticles exhibited two sharp signals at 30.3 and 29.6 ppm and a very broad signal at 72.7 ppm. X-ray photoelectron spectroscopy (XPS) showed SPTz⁻ can accomplish a strong interaction with gold nanoparticles through bonds involving a sulfur atom and a nitrogen from the triazole ring with a free terminal PS group, forming self-assembled monolayers (SAM). This may allow subsequent functionalization through free S/N atoms of the formed SAMs. The SPTz⁻ packing led to a reduction in packing density that permits large spaces between adsorbed headgroups and the inclusion of carbon and oxygen impurities from small molecules; nevertheless, oxidized sulfur or nitrogen species were not detected, indicating the chemical stability of the obtained SAMs.     

New metal-organic polygons involving MM quadruple bonds: M8(O2CtBu)4(mu-SC4H2-3,4-{CO2}2)6 (M=Mo, W)

The reactions between M2(O2CtBu)4, where M=Mo or W, and thienyl-3,4-dicarboxylic acid (0.5-1.5 equiv) in toluene proceed via a series of detectable intermediates to the compounds M8(O2CtBu)4(mu-SC4H2-3,4-{CO2}2)6, which are isolated as air-sensitive yellow (M=Mo) or red (M=W) powders and show parent molecular ions in their mass spectra (MALDI). The structure of the molybdenum complex was determined by single-crystal X-ray crystallography and shown to contain an unusual M8 polygon involving four Mo2 quadruply bonded units linked via the agency of the six 3,4-thienylcarboxylate groups. The structure has crystallographically imposed S4 symmetry and may be described in terms of a highly distorted tetrahedron of Mo2 units or a bisphenoid in which two Mo2 units are linked by a thienyldicarboxylate such that intramolecular Mo2...O bonding is present, while the other thienylcarboxylate bridges merely serve to link these two [Mo2]...[Mo2] units together. The color of the compounds arises from intense M2 delta-to-thienyl pi transitions and, in THF, the complexes are redox-active and show four successive quasi-reversible oxidation waves. The [M8]+ radical cations, generated by one-electron oxidation with AgPF6, are shown to be valence-trapped (class II) by UV-vis-near-IR and electron paramagnetic resonance spectroscopy. These results are supported by the electronic structure calculations on model compounds M8(O2CH)4(mu-SC4H2-3,4-{CO}2)6 employing density functional theory that reveal only a small splitting of the M2 delta manifold via mixing with the 3,4-thienylcarboxylate pi system.     

Triazenide complexes of the heavier alkaline earths: synthesis, characterization, and suitability for hydroamination catalysis

A series of triazenide complexes of the heavier alkaline earths, Ca, Sr and Ba, have been synthesized by either protonolysis or salt metathesis routes. Although complexes of the form [{Ar 2N 3}M{N(SiMe 3) 2}(THF) n ] (M = Ca, n = 2; M = Sr, n = 3; Ar = 2,6-diisopropylphenyl) and [{Ar 2N 3}Ca(I)(THF) 2] 2 could be isolated and characterized by X-ray crystallography, solution studies revealed the propensity of these species to undergo Schlenk-like redistribution with the formation of [{Ar 2N 3} 2M(THF) n ] (M = Ca, n = 1; M = Sr, n = 2). The latter compounds have been synthesized independently. In the case of the large barium dication, attempts to synthesize the heaviest analogue of the series, [{Ar 2N 3} 2Ba(THF) n ], failed and led instead to the isolation of the potassium barate complex [K{Ar 2N 3}Ba{N(SiMe 3) 2} 2(THF) 4]. Single crystal X-ray diffraction studies demonstrated that, although in all the aforementioned cases the triazenide ligand binds to the electrophilic group 2 metal centers via symmetrical kappa (2)- N, N-chelates, in the latter compound an unprecedented bridging mode is observed in which the triazenide ligand coordinates through both terminal and internal nitrogen centers. A series of density-functional theory computational experiments have been undertaken to assist in our understanding of this phenomenon. In further experiments, the calcium and strontium amide derivatives [{Ar 2N 3}M{N(SiMe 3) 2}(THF) n ] (M = Ca, n = 2; M = Sr, n = 3) proved to be catalytically active for the intramolecular hydroamination of 1-amino-2,2-diphenylpent-4-ene to form 2-methyl-4,4-diphenylpyrrolidine, with the calcium species demonstrating a higher turnover number than the strontium analogue ( 2a, TOF = 500 h (-1); 2b, TOF = 75 h (-1)). In these instances, because of ambiguities in the structural charcterization of the precatalyst in solution, such quantification holds little value and detailed catalytic studies have not been conducted.     

Tailored core-shell-shell nanostructures: sandwiching gold nanoparticles between silica cores and tunable silica shells

Size tunable and structure tailored core-shell-shell nanospheres containing silica cores, gold nanoparticle shells, and controlled thicknesses of smooth, corrugated, or porous silica shells over the gold nanoparticles have been synthesized. The synthesis involved the deposition of gold nanoparticles on silica cores, followed by sol-gel processing of tetraethoxysilane (TEOS) or sodium silicate to form dense or porous silica shells, respectively, over the gold nanoparticles. The structures and sizes of the resulting core-shell-shell nanospheres were found to heavily depend on the sizes of the core nanoparticles, the relative population of the gold nanoparticles on each core, and the concentration of TEOS. While a higher TEOS concentration resulted in thicker and more uniform silica shells around individual larger silica cores (approximately > or =250 nm in diameter), the same TEOS concentration resulted in aggregated and twin core-shell-shell nanostructures for smaller silica cores (approximately < or =110 nm in diameter). The thinner silica shells were synthesized by using a lower TEOS concentration. By using sodium silicate (Ung et al. J. Phys. Chem. B 1999, 103, 6770), the porous silica shells were synthesized. Controlled chemical etching of the core-shell-shell nanoparticles with an aqueous KCN solution resulted in corrugated silica shells around the gold nanoparticles or corrugated silica nanospheres with few or no gold nanoparticles. This has allowed synthesis of new types of core-shell-shell nanoparticles with tailored corrugated shells. The nanoporous silica shells provided accessible structures to the embedded metal nanoparticles as observed from the electrochemical response of the gold nanoparticles.     

负载钯纳米粒子聚电解质空心微球的制备及其还原对硝基苯酚的催化活性

用表面引发原子转移自由基聚合法(SI-ATRP)在二氧化硅纳米粒子表面接枝聚碘化甲基丙烯酸三甲基胺基乙酯(PMETAI),原位还原静电吸附的PdCl62-后刻蚀除去二氧化硅模板,成功制备了Pd纳米粒子复合聚电解质空心微球(air@PMETAI@Pd)。 用透射电子显微镜(TEM)、红外光谱仪(FTIR)、能谱仪(EDX)、热重分析仪(TGA)等技术手段对所制备的空心微球进行表征。 结果表明,Pd纳米粒子均匀负载在聚电解质微球上,其直径约为(1.5±0.2) nm。 将负载Pd纳米粒子的微球作为催化剂应用于硼氢化钠还原4-硝基苯酚反应,显示出很好的催化效果且具有较好的回收利用性。     

Detection protein biomarker with gold nanoparticles functionalized hollow mesoporous Prussian blue nanoparticles as electrochemical probes

Gold nanoparticles functionalized hollow mesoporous Prussian blue nanoparticles(Au@HMPB NPs)were synthesized and its peroxidase-like activity was explored for electrochemical probe.The Au@HMPB NPs can reduce H2O2 low detection potential of-0.1 V with high sensitivity.After physically adsorption of antibodies onto the gold nanoparticle surface,the functionalized nanoparticles were turned into immuno-probe.The soluble a-chain of interleukin-2(IL-2)receptor(sCD25)was chosen as a model protein biomarker to test the performance of the probe.sCD25 in the samples were captured and enriched by capture anti-CD25 antibody functionalized magnetic nanospheres.Detection antibody functionalized Au@HMPB can then be linked onto the nanospheres and generate electrochemical current towards H2O2 reduction.The electrochemical responses to 1 mmol/L H2O2 was increased with the increasing concentration of CD25.