Experimental study of velocity-scalar filtered joint density function for LES of turbulent combustion

The velocity-scalar filtered joint density function (FJDF) used in large eddy simulation (LES) of turbulent combustion is experimentally studied. Measurements are made in the fully developed region of an axisymmetric turbulent jet using an array consisting of three X-wires and resistance-wire temperature sensors. Filtering in the cross-stream and streamwise directions is realized by using the array and by invoking Taylor’s hypothesis, respectively. The means of the FJDF conditional on the subgrid-scale (SGS) turbulent kinetic energy and the SGS scalar variance at a given location range from close to joint normal to bimodal with the peaks separated in both velocity and scalar spaces, which correspond to qualitatively different mixing regimes. For close to joint normal FJDFs, the SGS fields are well mixed. For bimodal FJDFs, the conditionally filtered scalar diffusion and dissipation strongly depend on the SGS velocity and scalar, consistent with a combination of diffusion layers and plane strain in the SGS fields, which is similar to the counter-flow model for laminar flamelets. The results suggest that in LES, both mixing regimes could potentially be modeled accurately. The velocity field affects the SGS variance and the filtered scalar dissipation rate primarily by changing the degree of nonequilibrium of the SGS scalar and the SGS time scale, respectively. This study further demonstrates the importance of including velocity in mixing models.     

SGS Reaction rate modelling for MILD combustion based on machine-learning combustion mode classification: Development and a priori study

A neural network (NN) aided model is proposed for the filtered reaction rate in moderate or intense low-oxygen dilution (MILD) combustion. The framework of the present model is based on the partially stirred reactor (PaSR) approach, and the fraction of the reactive structure appearing in the PaSR is predicted using different NN’s, to consider both premixed and non-premixed conditions while allowing the use of imbalanced training data between premixed and non-premixed combustion direct numerical simulation (DNS) data. The key ingredient in the present model is the use of local combustion mode prediction performed by using another NN, which is developed in a previous study. The trained model was then assessed by using two unknown combustion DNS cases, which yields much higher dilution level (more intense MILD condition) and higher Karlovitz number than the DNS cases used as training data. The model performance assessment has been carried out by means of the Pearson’s correlation coefficient and mean squared error. For both the present model and zeroth-order approximated reaction rate, the correlation coefficient with the target values shows relatively high values, suggesting that the trend of predicted field, by the present model and zeroth-order approximation, is well correlated with the actual reaction rate field. This suggests that the use of PaSR equation is promising if the fraction of the reactive structure is appropriately predicted, which is the objective in the present study. On the other hand, substantially lower mean squared error is observed for a range of filter sizes for the present model than that for the zeroth-order approximation. This suggests that the present filtered reaction rate model can account for the SGS contribution reasonably well.     

不可压反应流动直接模拟和亚网格模型的检验

本文用谱方法对三维槽道不可压湍流反应流动进行了直接模拟,用直接模拟数据对大涡模拟亚网格质量流和燃烧模型进行了检验,结果发现,引入壁面阻尼修正的模型与精确值的符合比较好.     

A new mixed subgrid-scale model for large eddy simulation of turbulent drag-reducing flows of viscoelastic fluids

A mixed subgrid-scale(SGS) model based on coherent structures and temporal approximate deconvolution(MCT) is proposed for turbulent drag-reducing flows of viscoelastic fluids. The main idea of the MCT SGS model is to perform spatial filtering for the momentum equation and temporal filtering for the conformation tensor transport equation of turbulent flow of viscoelastic fluid, respectively. The MCT model is suitable for large eddy simulation(LES) of turbulent dragreducing flows of viscoelastic fluids in engineering applications since the model parameters can be easily obtained. The LES of forced homogeneous isotropic turbulence(FHIT) with polymer additives and turbulent channel flow with surfactant additives based on MCT SGS model shows excellent agreements with direct numerical simulation(DNS) results. Compared with the LES results using the temporal approximate deconvolution model(TADM) for FHIT with polymer additives, this mixed SGS model MCT behaves better, regarding the enhancement of calculating parameters such as the Reynolds number.For scientific and engineering research, turbulent flows at high Reynolds numbers are expected, so the MCT model can be a more suitable model for the LES of turbulent drag-reducing flows of viscoelastic fluid with polymer or surfactant additives.     

An improved dynamic subgrid-scale model and its application to large eddy simulation of rotating channel flows

Rotating turbulence occurs extensively in nature and engineering circumstances. Meanwhile, understanding physical mechanisms of the rotating turbulence is important to the fundamental research of turbulence. The turbulent flow in rotating frames undergoes two kinds of Coriolis force effects. First, a secondary flow is induced in the case that there is a mean vorticity component perpendicular to the rotating axis. Second, there are augmenting or suppressing effects on the turbulence if there i…     

A priori analysis of sub-grid variance of a reactive scalar using DNS data of high Ka flames

Direct numerical simulations (DNS) of low and high Karlovitz number (Ka) flames are analysed to investigate the behaviour of the reactive scalar sub-grid scale (SGS) variance in premixed combustion under a wide range of combustion conditions (regimes). An order of magnitude analysis is performed to assess the importance of various terms in the variance evolution equation and the analysis is validated using the DNS results. This analysis sheds light on the relative behaviour among turbulent transport and production, scalar dissipation and chemical processes involved in the evolution of the SGS variance at different Ka. The common expectation is that the variance equation shifts from a reaction-dissipation balance at low Ka to a production–dissipation balance at high Ka with diminishing reaction contribution. However, in large eddy simulation (LES), a high Ka alone does not make the reaction term negligible, as the relative importance of the reaction term has a concurrent increase with filter size. The filter size can be relatively large compared with the Kolmogorov length scale in practical LES of high Ka flames, and as a consequence a reaction–production–dissipation balance may prevail in the variance equation even in a high Ka configuration, and this possibility is quantified using the DNS analysis in this work. This has implications from modelling perspectives, and therefore two commonly used closures in LES for the SGS scalar dissipation rate are investigated a priori to estimate the importance of the above balance in LES modelling. The results are explained to highlight the interplay among turbulence, chemistry and dissipation processes as a function of Ka.     

Transported PDF simulation of turbulent CH4/H2 flames under MILD conditions with particle-level sensitivity analysis

Transported probability density function (TPDF) simulation with sensitivity analysis has been conducted for turbulent non-premixed CH₄/H₂ flames of the jet-into-hot-coflow (JHC) burner, which is a typical model to emulate moderate or intense low oxygen dilution combustion (MILD). Specifically, two cases with different levels of oxygen in the coflow stream, namely HM1 and HM3, are simulated to reveal the differences between MILD and hot-temperature combustion. The TPDF simulation well predicts the temperature and species distributions including those of OH, CO and NO for both cases with a 25-species mechanism. The reduced reaction activity in HM1 as reflected in the peak OH concentration is well correlated to the reduced oxygen in the coflow stream. The particle-level local sensitivities with respect to mixing and chemical reaction further show dramatic differences in the flame characteristics. HM1 is less sensitive to mixing and reaction parameters than HM3 due to the suppressed combustion process. Specifically, for HM1 the sensitivities to mixing and chemical reactions have comparable magnitude, indicating that the combustion progress is controlled by both mixing and reaction in MILD combustion. For HM3, there is however a change in the combustion mode: during the flame initialization, the combustion progress is more sensitive to chemical reactions, indicating that finite-rate chemistry is the controlling process during the autoignition process for flame stabilization; at further downstream where the flame has established, the combustion progress is controlled by mixing, which is characteristic of nonpremixed flames. An examination of the particles with the largest sensitivities reveals the difference in the controlling mixtures for flame stabilization, namely, the stoichiometric mixtures are important for HM1, whereas, fuel-lean mixtures are controlling for HM3. The study demonstrates the potential of TPDF simulations with sensitivity analysis to investigate the effects of finite-rate chemistry on the flame characteristics and emissions, and reveal the controlling physio-chemical processes in MILD combustion.     

Large eddy simulation of orientation and rotation of ellipsoidal particles in isotropic turbulent flows

The rotational motion and orientational distribution of ellipsoidal particles in turbulent flows are of significance in environmental and engineering applications. Whereas the translational motion of an ellipsoidal particle is controlled by the turbulent motions at large scales, its rotational motion is determined by the fluid velocity gradient tensor at small scales, which raises a challenge when predicting the rotational dispersion of ellipsoidal particles using large eddy simulation (LES) method due to the lack of subgrid scale (SGS) fluid motions. We report the effects of the SGS fluid motions on the orientational and rotational statistics, such as the alignment between the long axis of ellipsoidal particles and the vorticity, the mean rotational energy at various aspect ratios against those obtained with direct numerical simulation (DNS) and filtered DNS. The performances of a stochastic differential equation (SDE) model for the SGS velocity gradient seen by the particles and the approximate deconvolution method (ADM) for LES are investigated. It is found that the missing SGS fluid motions in LES flow fields have significant effects on the rotational statistics of ellipsoidal particles. Alignment between the particles and the vorticity is weakened; and the rotational energy of the particles is reduced in LES. The SGS-SDE model leads to a large error in predicting the alignment between the particles and the vorticity and over-predicts the rotational energy of rod-like particles. The ADM significantly improves the rotational energy prediction of particles in LES.     

On the effect of an anisotropy-resolving subgrid-scale model on large eddy simulation predictions of turbulent open channel flow with wall roughness

A large eddy simulation (LES) was conducted of turbulent flow in a channel with a rough wall on one side and a free surface on the other by adopting an anisotropy-resolving subgrid-scale (SGS) model. A shear Reynolds number of Re_τ = 395 was used based on the mean friction velocity and channel height. To investigate the grid dependency of the LES results caused by the SGS model, three grid resolutions were tested under the same definition of a roughness shape by using the immersed boundary method. The results obtained were compared with direct numerical simulation data with and without the wall roughness and those without the extra anisotropic term. The primary focus was on how the present anisotropic SGS model with coarser grid resolutions can properly provide the effects of roughness on the mean velocity and turbulent stresses, leading to a considerable reduction of the computational cost of LES.     

A mixing controlled direct chemistry (MCDC) model for diesel engine combustion modelling using large eddy simulation

A mixing controlled direct chemistry (MCDC) combustion model with sub-grid scale (SGS) mixing effects and chemical kinetics has been evaluated for Large Eddy Simulation (LES) of diesel engine combustion. The mixing effect is modelled by a mixing timescale based on mixture fraction variance and sub-grid scalar dissipation rate. The SGS scalar dissipation rate is modelled using a similarity term and a scaling factor from the analysis of Direct Numerical Simulation (DNS) data. The chemical reaction progress is estimated from a kinetic timescale based on local internal energy change rate and equilibrium state internal energy. An optical research engine operating at conventional operating conditions and Low Temperature Combustion (LTC) conditions was used for evaluation of the combustion model. From the simulation results, the effect of SGS scalar mixing is evaluated at different stages of combustion. In the context of LES, the new approach provides improved engine modelling results compared to the Direct Chemistry Solver (DCS) combustion model.     

Large eddy simulation of piloted pulverised coal combustion using extended flamelet/progress variable model

An extended flamelet/progress variable (EFPV) model for simulating pulverised coal combustion (PCC) in the context of large eddy simulation (LES) is proposed, in which devolatilisation, char surface reaction and radiation are all taken into account. The pulverised coal particles are tracked in the Lagrangian framework with various sub-models and the sub-grid scale (SGS) effects of turbulent velocity and scalar fluctuations on the coal particles are modelled by the velocity-scalar joint filtered density function (VSJFDF) model. The presented model is then evaluated by LES of an experimental piloted coal jet flame and comparing the numerical results with the experimental data and the results from the eddy break up (EBU) model. Detailed quantitative comparisons are carried out. It is found that the proposed model performs much better than the EBU model on radial velocity and species concentrations predictions. Comparing against the adiabatic counterpart, we find that the predicted temperature is evidently lowered and agrees well with the experimental data if the conditional sampling method is adopted.     

Large eddy simulation of a turbulent nonpremixed piloted methane jet flame (Sandia Flame D)

Large eddy simulation (LES) is conducted of the Sandia Flame D [Proc. Combust. Inst. 27 (1998) 1087, Sandia National Laboratories (2004)], which is a turbulent piloted nonpremixed methane jet flame. The subgrid scale (SGS) closure is based on the scalar filtered mass density function (SFMDF) methodology [J. Fluid Mech. 401 (1999) 85]. The SFMDF is basically the mass weighted probability density function (PDF) of the SGS scalar quantities [Turbulent Flows (2000)]. For this flame (which exhibits little local extinction), a simple flamelet model is used to relate the instantaneous composition to the mixture fraction. The modelled SFMDF transport equation is solved by a hybrid finite-difference/Monte Carlo scheme. This is the first LES of a realistic turbulent flame using the transported PDF method as the SGS closure. The results via this method capture important features of the flame as observed experimentally.     

Effects of subgrid scale and combustion modelling on flame structure of a turbulent premixed flame within LES and tabulated chemistry framework

The effects of combustion and SubGrid Scale (SGS) modelling on the overall flame characteristics of a turbulent premixed flame are investigated. This is achieved in terms of mean flow statistics, variances and flame surfaces. In particular, the chemical flame structure is analysed and compared. The Artificially Thickened Flame (ATF) approach coupled with the Flamelet Generated Manifolds (FGMs) and Filtered TAbulated Chemistry for LES (F-TACLES) approaches are used for this investigation. A Germano like procedure for dynamical calculation of SGS wrinkling is used which ensures the conservation of the total flame surface for both models. It turns out that using the dynamic SGS wrinkling model improves the results. Although the results of both combustion models in terms of statistics, mean and variances show very good agreement, the resolved flame surfaces hide different dynamic behaviour.     

Relevance of the subgrid-scales for large eddy simulations of turbulence-radiation interactions in a turbulent plane jet

An a priori study based on direct numerical simulation (DNS) of a non-isothermal turbulent plane jet has been carried out in order to analyse the role of the small-scales of turbulence on thermal radiation. Filtered DNS and large eddy simulation (LES) without subgrid-scale (SGS) model have been estimated for the radiative heat transfer. The comparison of the results highlights the subgrid-scale influence over the filtered radiation quantities, such as the radiative intensity and the radiative emission. The influence of the optical thickness is also studied. It is shown that the subgrid-scales are not significant near the centerline of the jet, where the radiative heat transfer is more important, and therefore that the SGS can be neglected in this configuration. However, when the optical thickness increases, the SGS become relevant and SGS modeling may be needed.     

High-order incompressible large-eddy simulation of fully inhomogeneous turbulent flows

The subgrid-scale (SGS) eddy-viscosity model developed by Vreman [Phys. Fluids 16 (2004) 3670] and its dynamic version [Phys. Fluids 19 (2007) 065110] are tested in large-eddy simulations (LES) of the turbulent flow in an Re = 12,000 lid-driven cubical cavity by comparison to the direct numerical simulation (DNS) data of Leriche and Gavrilakis [Phys. Fluids 12 (2000) 1363]. This appears to be the first test of this class of model to flows without any homogeneous flow directions, which is typical of flows in complex geometries. Additional LES predictions at Re = 18,000 and Re = 22,000 are compared to the DNS data of Leriche [J. Sci. Comp. 27 (2006)]. The new LES framework yielded excellent agreement for both the mean velocity and Reynolds stress profiles and matches DNS data better than the more traditional Smagorinsky-based SGS models.     

一种改进后的亚格子特征尺度表达式

针对大涡模拟涡粘性亚格子模式中使用网格尺度为特征尺度存在的不足,提出一种改进的亚格子特征尺度表达式,利用结合Sagaut混合尺度模式获得的改进模式与Smagorinsky模式、Germano模式和Sagaut模式等进行对比研究.时间发展混合层和中性大气边界层的大涡模拟结果表明,改进的有效亚格子特征尺度能合理反映亚格子脉动的时空分布特性,同时扩展了适用范围.在对耗散程度、流动演化过程、可解湍流强度和可解雷诺应力等方面的模拟,改进模式优于基准模式,表明亚格子脉动有效特征尺度在大涡模拟中具有一定的理论基础和广泛的应用价值.     

不同亚格子模式在后台阶湍流流动大涡模拟中的应用

本文用大涡模拟方法研究了湍流后台阶流场中的大涡演变过程,并在此基础上研究了目前大涡模拟中比较常用的六种亚格子模式。在相同的流动几何参数以及计算条件下,给出了不同亚格子模式下湍流流动瞬时压力场以及流场中瞬时粘性大小的分布,尤其给出了流场瞬时演变的大尺度涡结构。将六种亚格子模式从回流区长度、计算时间、计算结果的准确性和流场稳定性等不同角度进行了比较。为选取合适的亚格子模式深入研究湍流耗散机理奠定了基础。     

The effect of subgrid-scale models on the entrainment of a passive scalar in a turbulent planar jet

Classical large-eddy simulation (LES) modelling assumes that the passive subgrid-scale (SGS) models do not influence large-scale quantities, even though there is now ample evidence of this in many flows. In this work, direct numerical simulation (DNS) and large-eddy simulations of turbulent planar jets at Reynolds number Re_H = 6000 including a passive scalar with Schmidt number Sc = 0.7 are used to study the effect of several SGS models on the flow integral quantities e.g. velocity and scalar jet spreading rates. The models analysed are theSmagorinsky, dynamic Smagorinsky, shear-improved Smagorinsky and the Vreman. Detailed analysis of the thin layer bounding the turbulent and non-turbulent regions – the so-called turbulent/non-turbulent interface (TNTI) – shows that this region raises new challenges for classical SGS models. The small scales are far from equilibrium and contain a high fraction of the total kinetic energy and scalar variance, but the situation is worse for the scalar than for the velocity field. Both a-priori and a-posteriori (LES) tests show that the dynamic Smagorinsky and shear-improved models give the best results because they are able to accurately capture the correct statistics of the velocity and passive scalar fluctuations near the TNTI. The results also suggest the existence of a critical resolution Δ_x, of the order of the Taylor scale λ, which is needed for the scalar field. Coarser passive scalar LES i.e. Δ_x ≥ λ results in dramatic changes in the integral quantities. This fact is explained by the dynamics of the small scales near the jet interface.     

Particle subgrid scale modelling in large-eddy simulations of particle-laden turbulence

This study is concerned with particle subgrid scale (SGS) modelling in large-eddy simulations (LESs) of particle-laden turbulence. Although many particle-laden LES studies have neglected the effect of the SGS on the particles, several particle SGS models have been proposed in the literature. In this research, the approximate deconvolution method (ADM) and the stochastic models of Fukagata et al. (Dynamics of Brownian particles in a turbulent channel flow, Heat Mass Transf. 40 (2004), 715–726) Shotorban and Mashayek (A stochastic model for particle motion in large-eddy simulation, J. Turbul. 7 (2006), 1–13) and Berrouk et al. (Stochastic modelling of inertial particle dispersion by subgrid motion for LES of high Reynolds number pipe flow, J. Turbul. 8 (2007), pp. 1–20) are analysed. The particle SGS models are assessed using both a priori and a posteriori simulations of inertial particles in a periodic box of decaying, homogeneous and isotropic turbulence with an initial Reynolds number of Re_λ = 74. The model results are compared with particle statistics from a direct numerical simulation (DNS). Particles with a large range of Stokes numbers are tested using various filter sizes and stochastic model constant values. Simulations with and without gravity are performed to evaluate the ability of the models to account for the crossing trajectory and continuity effects. The results show that ADM improves results but is only capable of recovering a portion of the SGS turbulent kinetic energy. Conversely, the stochastic models are able to recover sufficient SGS energy, but show a large range of results dependent on the Stokes number and filter size. The stochastic models generally perform best at small Stokes numbers, but are unable to predict preferential concentration.     

A LES/PDF simulator on block-structured meshes

A block-structured mesh large-eddy simulation (LES)/probability density function (PDF) simulator is developed within the OpenFOAM framework for computational modelling of complex turbulent reacting flows. The LES/PDF solver is a hybrid solution methodology consisting of (i) a finite-volume (FV) method for solving the filtered mass and momentum equations (LES solver), and (ii) a Lagrangian particle-based Monte Carlo algorithm (PDF solver) for solving the modelled transport equation of the filtered joint PDF of compositions. Both the LES and the PDF methods are developed and combined to form a hybrid LES/PDF simulator entirely within the OpenFOAM framework. The in situ adaptive tabulation method [S.B. Pope, Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation, Combust. Theory Model. 1 (1997), pp. 41–63; L. Lu, S.R. Lantz, Z. Ren, and B.S. Pope, Computationally efficient implementation of combustion chemistry in parallel PDF calculations, J. Comput. Phys. 228 (2009), pp. 5490–5525] is incorporated into the new LES/PDF solver for efficient computations of combustion chemistry with detailed reaction kinetics. The method is designed to utilise a block-structured mesh and can readily be extended to unstructured grids. The three-stage velocity interpolation method of Zhang and Haworth [A general mass consistency algorithm for hybrid particle/finite-volume PDF methods, J. Comput. Phys. 194 (2004), pp. 156–193] is adapted to interpolate the LES velocity field onto particle locations accurately and to enforce the consistency between LES and PDF fields at the numerical solution level. The hybrid algorithm is fully parallelised using the conventional domain decomposition approach. A detailed examination of the effects of each stage and the overall performance of the velocity interpolation algorithm is performed. Accurate coupling of the LES and PDF solvers is demonstrated using the one-way coupling methodology. Then the fully two-way coupled LES/PDF solver is successfully applied to simulate the Sandia Flame-D, and a turbulent non-swirling premixed flame and a turbulent swirling stratified flame from the Cambridge turbulent stratified flame series [M.S. Sweeney, S. Hochgreb, M.J. Dunn, and R.S. Barlow, The structure of turbulent stratified and premixed methane/air flames I: Non-swirling flows, Combust. Flame 159 (2012), pp. 2896–2911; M.S. Sweeney, S. Hochgreb, M.J. Dunn, and R.S. Barlow, The structure of turbulent stratified and premixed methane/air flames II: Swirling flows, Combust. Flame 159 (2012), pp. 2912–2929]. It is found that the LES/PDF method is very robust and the results are in good agreement with the experimental data for both flames.