基于Fournier Forand体积散射函数的水中激光脉冲后向散射特性分析模型

基于Fournier Forand体积散射函数,建立了一种水中激光脉冲后向散射仿真模型.运用该模型可用Monte Carlo方法模拟光子在水中的传播过程,并得到光波后向散射的冲击响应.将初始激光脉冲与冲击响应进行卷积并求其傅里叶谱,即可得到激光脉冲后向散射信号的时域和频域特征.利用该模型分析了入射为高斯型激光脉冲时,水中散射体的尺度分布、散射体与纯水的相对折射率以及水体衰减系数对激光脉冲后向散射特性的影响.结果表明：随着小尺度散射体相对数量的增多、散射体与纯水相对折射率的增加、水体衰减系数的增大,激光脉冲后向散射信号能量增强,宽度增加,低频分量显著增大.     

激光脉冲宽度对远距离尾流气泡后向检测的影响

为了分析激光脉冲宽度对远距离尾流气泡后向检测的影响,基于Fournier Forand体积散射函数,通过Monte Carlo方法建立了水中激光脉冲后向散射信号时域特征的分析模型.利用该模型研究了初始激光脉冲宽度不同时,水中远距离舰船尾流气泡的激光脉冲后向散射信号变化情况.结果表明:随着初始激光脉冲宽度的增加,后向散射...     

激光脉冲宽度对远距离尾流气泡后向检测的影响

为了分析激光脉冲宽度对远距离尾流气泡后向检测的影响,基于Fournier Forand体积散射函数,通过Monte Carlo方法建立了水中激光脉冲后向散射信号时域特征的分析模型.利用该模型研究了初始激光脉冲宽度不同时,水中远距离舰船尾流气泡的激光脉冲后向散射信号变化情况.结果表明:随着初始激光脉冲宽度的增加,后向散射信号中水体散射信号与尾流气泡回波信号的轮廓变得模糊|当脉冲宽度增大到一定程度时,无法从后向散射信号中辨别出回波信号|并且,随着尾流区气泡散射强度的减小以及气泡区与检测器之间距离的减短,这种变化趋势变得更加明显.基于仿真结果,提出一种基于逆卷积运算的尾流气泡回波信号提取方法.     

激光散射场理论及其应用

在薄层散射的基础上，研究了寻常散射和非常散射的差别，建立起了散射椭圆的模型。然后从薄层散射过渡到厚层散射，检测了激光在水中的散射场和退偏振度，并对前向散射和后向散射导出了简化的场强计算公式：公式中的常数一散射率成为评价激光散射场和退偏振的依据。本研究的结论直接对提高水中目标探测的信噪比有现实意义。     

激光在水中气泡微粒的后向散射特性

从激光能量、目标位置、视场大小及气泡厚度等方面对气泡后向散射特性进行研究.采用实验方法研究脉冲激光气泡后向散射特性.实验结果表明,增大激光能量在一定程度上可以有效地改善气泡探测的效果,而气泡发生器位置和视场的合理选择使得气泡探测更容易些,气泡区域厚度的变化对气泡后向散射并没有明显的影响.该实验结论与蒙特卡洛数值模拟的结果一致.     

高散射抑制比激光雷达水下探测技术探析

浅海海水严重的后向散射是阻碍激光近海水下探测应用的关键问题,回波信号中的后向散射制约了水下目标探测深度、分辨率和对比度.针对该问题,研究了两种高散射抑制比海洋激光雷达——混沌脉冲激光雷达和相干双频脉冲激光雷达,这两种激光雷达信号具有内在的高频强度调制特性,而后向散射具有低频特性.因此,在目标信号光和后向散射光同量级条件下,可通过带通或高通滤波将海水后向散射滤除,从而提高系统信噪比.     

舰船尾流气泡后向光学检测方法研究

为探索舰船尾流后向光学检测方法,研究了尾流气泡对水中激光脉冲后向散射特性的影响。首先基于Fournier Forand 体积散射函数,利用蒙特卡罗(Monte-Carlo)方法理论分析了近距离尾流气泡对激光脉冲后向散射特性的影响。然后,采用蓝绿激光脉冲作为光源,实验研究了模拟尾流气泡对激光脉冲后向散射信号的影响。研究表明,尾流气泡的存在会使得激光脉冲后向散射信号前沿位置在时域左移,后沿位置在时域右移,信号时域宽度增加,能量增强,峰值增大且位置在时域左移。最后根据研究结果提出了一种基于激光脉冲后向散射信号特征变化的舰船尾流气泡后向检测方法。     

强电磁脉冲信号激励下复杂目标的散射

 用时域有限差分法仿真了某飞行器缩比模型及该模型涂敷雷达吸波材料的散射特性，得到了鼻锥方向、侧向和后向ns级脉冲激励下模型的时域响应和频域雷达散射截面；并在外场用ns级脉冲源进行了该金属模型的探测实验。仿真与外场实验结果均得到了模型的鼻锥方向回波幅度最小，侧向最大；鼻锥方向回波脉宽最宽，侧向最窄的结论。研究结果表明：外形隐身和材料隐身对ns或亚ns级窄脉冲的隐身效果不明显，ns或亚ns级窄脉冲能发现和识别隐身目标。     

基于受激布里渊散射能量转移的冲击点火激光技术研究

提出一种新型的激光放大技术, 高效地实现冲击点火所需的10² ps级高功率激光脉冲. 该技术耦合了传统的激光驱动器放大技术和受激布里渊散射(SBS) 脉冲压缩技术, 在不改变现有激光装置主体结构的前提下, 使用长脉冲(数 ns) 充分提取主放大器储能, 然后在系统输出端通过SBS进行脉冲自抽运的能量转移, 将长脉冲能量转移给10² ps级的冲击脉冲, 实现高效放大的目的. 该技术在主动控制下实现能量转移, 将克服传统SBS压缩时间特性不可控的缺点, 输出满足冲击点火时域特性要求的精密控制激光脉冲.     

水中气泡激光散射的图像识别方法研究

采用Q调制高功率脉冲激光光源和水下数码相机拍摄到水中气泡群光散射的图像。对水中群聚气泡的光散射图像进行了初步的定性研究。利用MATLAB处理并分析图像,结果表明气泡光散射图像的梯度与气泡的尺度有关,用图像方法来识别气泡群是可行的。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.