Voltammetric Determination of Rosiglitazone in Pharmaceutical Preparations and Human Plasma

Abstract

The voltammetric behavior of rosiglitazone was studied using direct current (DC_t), differential pulse (DPP), and alternating current (AC_t) polarography. The drug manifests cathodic waves over a pH range of 2–11.2. In Britton‐Robinson buffer (BRb; pH 4), the diffusion current–concentration relationship was found to be rectilinear over a range of 4–24 µg · mL^?1 and 0.1–16 µg · mL^?1 using DC_t and DPP modes, respectively, with minimum limits of detection (LOD) of 0.15 µg · mL^?1 and 0.07 µg · mL^?1 using the DC_t and DDP modes, respectively. The diffusion‐current constant (I _d) was 6.63±0.03 (n=5). The proposed method was successfully applied to the determination of the studied compound both in pure form and in formulations. The mean percentage recoveries in tablets were 100.09±1.18 and 100.85±0.88 (n=5) using DC_t and DPP modes, respectively. Furthermore, the proposed method, adopting the DPP mode, was applied to the determination of rosiglitazone in spiked human plasma and the obtained mean percentage recoveries were 99.14±3.29 (n=4).     

Electrochemical behaviour and determination of rimsulfuron herbicide by square wave voltammetry

The voltammeric behaviour of rimsulfuron herbicide has been studied by square wave stripping voltammetry on static hanging mercury drop electrode. It exhibited a well-defined peak within the pH range of 1.0–6.0, having a maximum peak response at ?600 mV (vs.Ag/AgCl) at pH 3.0. The factors such as accumulation potential (E_acc), accumulation time (t_acc), frequency (f), pulse amplitude (ΔE) and step potential (ΔE_s) have been optimised. The calibration plot was a straight line in the range of 4.4–134.4 μg L^?1 with a detection limit of 1.3 μg L^?1. The validity of the method was assessed from the recoveries of spiked lake water, tomato juice and agrochemical formulation of Doncep^®. The results of the experiments conducted for five recoveries were 48.8 ± 1.7 and 49.7 ± 1.0 μg L^?1, which are very close to the rimsulfuron spiked to lake water and tomato juice (50 μg L^?1), with a relative error of –2.4% and ?0.6%, respectively. The electrode reaction mechanism was also postulated.     

Rapid and Highly Sensitive HPLC and TLC Methods for Quantitation of Amlodipine Besilate and Valsartan in Bulk Powder and in Pharmaceutical Dosage Forms and in Human Plasma

Two simple, sensitive, and specific high-performance liquid chromatography and thin-layer chromatography methods were developed for the simultaneous estimation of Amlodipine besilate (AM) and Valsartan (VL). Separation by HPLC was achieved using a xTerra C18 column and methanol /acetonitrile /water/ 0.05% triethylamine in a ratio 40:20:30:10 by volume as mobile phase, pH was adjusted to 3 ± 0.1 with o-phosphoric acid. The flow rate was 1.2 mL min^?1. The linearity range was 0.2 to 2 µg mL^?1 for amlodipine besilate and 0.4 to 4 µg mL^?1 for Valsartan with a mean percentage recovery of 99.59 ± 0.523% and 100.61 ± 0.400% for amlodipine besilate and valsartan, respectively. The TLC method used silica gel 60 F₂₅₄ plates; the optimized mobile phase was ethyl acetate/ methanol / ammonium hydroxide (55:45:5 by volume). Quantitatively, the spots were scanned densitometrically at 237 nm. The range was 0.5–4.0 µg spot^?1 for amlodipine besilate and 2.0–12.0 µg spot^?1 for valsartan. The mean percentages recovery was 99.80 ± 0.451% and 100.61 ± 0.363% for amlodipine besilate and valsartan, respectively. The HPLC method was found to be simple, selective, precise, and reproducible for the estimation of both drugs from spiked human plasma.     

Determination of arsenic species in a freshwater crustacean Procambarus clarkii

The arsenic species present in samples of the crayfish Procambarus clarkii caught in the area affected by the toxic mine‐tailing spill at Aznalcóllar (Seville, Southern Spain) were analyzed. The total arsenic contents ranged between 1.2 and 8.5 µg g^?1 dry mass (DM). With regard to the different species of arsenic, the highest concentrations were for inorganic arsenic (0.34–5.4 µg g^?1 DM), whereas arsenobetaine, unlike the situation found in marine fish products, was not the major arsenic species (0.16 ± 0.09 µg g^?1 DM). Smaller concentrations were found of arsenosugars 1a (0.18 ± 0.11 µg g^?1 DM), 1b (0.077 ± 0.049 µg g^?1 DM), 1c (0.080 ± 0.089 µg g^?1 DM), and 1d (0.14 ± 0.13 µg g^?1 DM). The presence of two unknown arsenic species was revealed (U1: 0.058 ± 0.058 µg g^?1 DM; U2: 0.12 ± 0.12 µg g^?1 DM). No significant differences were seen with respect to the total arsenic contents between the sexes. However, significant differences in the total arsenic contents were revealed between the area affected by the spill and the area not affected, the contents being greater in the affected area. Copyright © 2002 John Wiley & Sons, Ltd.     

A novel method for the simple and simultaneous preconcentration of Pb2+, Cu2+ and Zn2+ ions with aid of diethylenetriamine functionalized SBA-15 nanoporous silica compound

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺, Cu²⁺ and Zn²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with diethylenetriamine groups and flame atomic absorption spectrometry (FAAS) is presented. The preconcentration factor of the method is 100 and detection limit of the technique is 5.5?ng?mL^?1 and 1.4?ng?mL^?1 and 0.1?ng?mL^?1 for Pb²⁺, Cu²⁺ and Zn²⁺ respectively. The time and the optimum amount of the sorbent, pH and minimum amount of acid for stripping of ions from functionalized SBA-15 were tested. The maximum capacity the functionalized SBA-15 was found to be 183.0 (±1.9) µg, 156.0 (±1.5) µg and 80.0 (±1.6) µg of Pb²⁺, Cu²⁺ and Zn²⁺/mg functionalized SBA-15, respectively.     

Electrochemical Behaviour of Carbamazepine in Acetonitrile and Dimethylformamide Using Glassy Carbon Electrodes and Microelectrodes

The electrochemical reduction of carbamazepine in acetonitrile (ACN) and dimethylformamide (DMF) using a glassy carbon electrode and microelectrodes has been studied. The reduction process is consistent with an electrochemical‐chemical mechanism (EC) involving a two electron transfer followed by a first order reaction, as shown by the cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Half‐wave potential, number of electron transferred, diffusion coefficient and rate constant of the associated chemical reaction are reported. Limits of detection (LOD) for DPV are 0.92 and 0.76 µg mL^?1 (3.89×10^?6 mol L^?1 and 3.21×10^?6 mol L^?1) in ACN and DMF, respectively. Precision (%RSD) and recovery (%) values when pharmaceutical compounds (200mg carbamazepine tablets) and spiked plasma samples were tested ranged from 1.09 to 9.04 % and % recoveries ranged from 96 to 104.1 %.     

Determination of Explosives in Water Using Disposable Pipette Extraction and High Performance Liquid Chromatography

The use of disposable pipette extraction was examined for the simple and rapid determination of seven high explosives (cyclotrimethyl-enetrinitramine, cyclotetramethyl-enetetranitramine, 2,4,6-trinitrophenyl-methylnitramine, 2,4,6-trinitrotoluene, 2,4-dinitrotoluene, nitroglycerin, and pentaerythritol tetranitrate) in water. The current study involved the determination of slightly polar and nonpolar explosives in water with a reversed phase sorbent followed by high performance liquid chromatography. The method was based on a styrene divinylbenzene sorbent loosely placed inside a 5-mL pipette tip. Water samples were drawn into the tip and mixed with the sorbent. Air bubbles were also drawn through the tip following sample solution to enhance mixing. Because disposable pipette extraction uses small amounts of sorbent, minimal solvent is required to elute analytes and solvent evaporation is not necessary. The method provided rapid sample preparation, and required less than five minutes to extract 1.0 mL of water sample in the current study. Matrix-matched calibration was performed, and the limits of detection (LOD) were determined to be below 0.1 µg mL^?1 for all targeted explosives in water with an enrichment factor of two. Coefficients of determination (r²) were greater than 0.9990 for all studied explosives, and the recoveries ranged from 69.76% to 87.51%, 83.77% to 91.25%, and 83.62% to 98.99% for samples spiked at 0.25 µg mL^?1, 1.0 µg mL^?1, and 5.0 µg mL^?1, respectively. The relative standard deviations of recoveries at all spiked levels were below 8.97%. These results indicate that the disposable pipette extraction method provided good accuracy and precision for the determination of explosives in water.     

Polarographic determination of herbicide thifensulfuron methyl/application to agrochemical pesticide,soil, and fruit juice

A novel, sensitive, simple, fast, and fully validated differential pulse polarographic (DPP) method for the determination of trace amounts of thifensulfuron-methyl in pesticide formulation, soil, and orange juice is reported. This procedure was based on a highly sensitive peak formed due to the reduction of thifensulfuron-methyl on a dropping mercury electrode over the pH range 1.00–10.00 in Britton–Robinson buffer. The polarographic reduction exhibits only a single peak in the pH ranges pH?≥?3.0 and pH?≤?6.0 and pH?=?10.0 located at potential values of ?1.010, ?1.350, and ?1.610?V (vs. SCE), respectively. The single peak appeared as a maximum at pH 3.0 (?1.010?V) was well resolved and suitable to be investigated for analytical use. This peak showed quantitative increments with the additions of standard thifensulfuron-methyl solution under the optimal conditions, and the cathodic peak current was linearity proportional to the thifensulfuron-methyl concentration in the range of 2?×?10^?7–5?×?10^?5?M. The limit of detection (LOD) and limit of quantification (LOQ) were obtained as 1.05?×?10^?7 and 3.50?×?10^?7?M, respectively, according to the relation k ?×?SD/b (where k?=?3 for LOD, k?=?10 for LOQ, SD is the standard deviation of the blank, and b is the slope of the calibration curve). The proposed method was applied to pesticide formulation (Harmony® Extra), and the average percentage recovery was in agreement with that obtained by the spectrophotometric comparison method, 97.82 and 102.6%, respectively. The method was extended to determination of thifensulfuron-methy in spiked soil and orange juice, showing a good reproducibility and accuracy with a relative standard deviation of 4.55 and 1.40%, and relative errors of +2.80 and +1.90%, respectively.     

Rapid Fluorometric Determination of Trace Indium(III) in Microemulsion Medium after Preconcentration and Separation by Sulphydryl Dextrane Gel

A new highly sensitive, stable, and accurate fluorometric method for the determination of indium(III) has been established in cetyltrimethylammonium bromide(CTMAB) microemulsion media. The excellent color-forming reagent 2,6,7-trihydroxy-9-(3,5-dibromo-4-hydroxyphenyl) fluorone (DBH-PF) reacts with indium(III) to form a purple complex with a 3 : 1 (ligand to metal) ratio in HAc-NaAc buffer solution at pH 4.94. The emission peak occurs at 556 nm with excitation at 525 nm. Indium(III) can be determined in the linear range of 0.005–0.30 μg mL⁻¹ with a detection limit of 0.0029 μg mL⁻¹. Foreign ions are eliminated by preconcentration and separation with sulfhydryl dextranegel (SDG). The proposed method has been satisfactorily examined for the determination of indium(III) in ore and sludge samples. The relative standard deviations are in all instances less than 3.0%, and the recoveries are between 94.7, and 99.5%. __________ From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 9, 2005, pp. 979–984. Original English Text Copyright ? 2005 by Wei Qin, Du Bin, Zhang Hui, Li Yan, Li Zaijun. The text was submitted by the authors in English.     

Simultaneous Estimation of Atorvastatin Calcium, Ramipril and Aspirin in Capsule Dosage Form by RP-LC

A simple, sensitive, precise and accurate reversed phase liquid chromatographic method has been developed for the simultaneous estimation of atorvastatin (AT) calcium, ramipril (RA) and aspirin (AS) from capsule dosage form. The method was developed using a Phenomenex Luna C₁₈ (250 mm, 4.6 mm i.d., 5 µm) column with a mobile phase consisting of 0.1%, orthophosphoric acid buffer:acetonitrile:methanol (45:50:5 v/v/v), pH 3.3, at a flow rate of 1 mL min^?1. Detection was carried out with ultra-violet detection at 210 nm. The retention times were about 12.19, 2.35, and 3.95 min for AT calcium, RA and AS, respectively. The developed method was validated for linearity, accuracy, precision, limit of detection, limit of quantitation and robustness. The linearity ranges were 1–6 µg mL^?1 for AT calcium, 0.5–3 µg mL^?1 for RA and 7.5–45 µg mL^?1 for AS with mean recoveries of 100.59 ± 0.68, 100.62 ± 0.83 and 100.49 ± 0.73% for AT calcium, RA and AS, respectively. Limit of detection obtained were 29.85 ng mL^?1 for AT calcium, 4.71 ng mL^?1 for RA and 85.13 ng mL^?1 for AS. Impurity of salicylic acid was found in capsule dosage form at the retention time of about 4.84 min. The proposed method can be used for the estimation of these drugs in combined dosage forms.     

Adsorptive Stripping Differential Pulse Voltammetry for Determination of Trace Amounts of Noscapine in Human Plasma

A new adsorptive anodic differential pulse stripping voltammetry method for the direct determination of noscapine at trace levels in human plasma of addicts is proposed. The procedure involves an adsorptive accumulation of noscapine on a hanging mercury drop electrode (HMDE), followed by oxidation of adsorbed noscapine by voltammetry scan using differential pulse modulation. The optimum conditions for the analysis of noscapine are pH = 8.5 using Britton‐Robinson (B‐R) buffer, accumulation potential of ?100 mV (vs. Ag/AgCl), and accumulation time of 150 s. The peak current is proportional to the concentration of noscapine, and a linear calibration graph is obtained at 0.015–2.75 μg mL^?1. A relative standard deviation of 1.28% (n = 5) was obtained, and the limit of detection was 7 ng mL^?1. The capability of the method for the analysis of real samples was evaluated by determination of noscapine in spiked human plasma and addicts, human plasma with satisfactory results.     

Simultaneous Determination of Benzodiazepines and Ketamine from Alcoholic and Nonalcoholic Beverages by GC-MS in Drug Facilitated Crimes

A GC-MS method with HP-5MS capillary column was developed for the simultaneous determination of underivatized flunitrazepam, clonazepam, alprazolam, diazepam and ketamine from drinks by extraction with chloroform: isopropanol 1:1 (v/v). All linearity ranges were between 50 and 1,000 μg mL^?1 for all compounds both in beer and in peach juice. Limit of detection was between 1.3 and 34.2 μg mL^?1, limit of quantification was between 3.9 and 103.8 μg mL^?1, the range of recoveries was 73.0 and 112.6% for all drugs in both beverages. The reported method was sensitive, rapid, and suitable for the analysis of the spiked drinks as evidence of sexual assault and robbery phenomena.     

Differential Pulse Polarographic Determination of Moxifloxacin Hydrochloride in Pharmaceuticals and Biological Fluids

Abstract

A simple, fast, sensitive and fully validated differential pulse polarographic (DPP) method for the determination of trace amounts of moxifloxacin in pharmaceutics, serum and urine is reported. Moxifloxacin exhibited irreversible cathodic peak over the pH 5.00–11.00 in Britton–Robinson (B–R) buffer. At pH 10.00 (the analytical pH), a well‐defined peak at ?1.61 V versus saturated calomel electrode was obtained. The current has been characterized as being diffusion‐controlled process. The diffusion current constant (i_d) was 1.48±0.12 and the current–concentration plot was rectilinear over the range from 5×10^?7 to 1×10^?4 M with correlation coefficient (n=10) of 0.995.

The proposed method was applied to commercial tablets and average percentage recovery was in agreement with that obtained by spectrophotometric comparison method. The method was extended to the in vitro determination of moxifloxacin in spiked human serum and urine.     

Rapid Low-Cost Determination of Lead(II) in Cassava by an iPod-Based Digital Imaging Colorimeter

An iPod-based digital image colorimeter was developed for the determination of lead(II) in cassava. The method is based on the color values of a lead(II) solution following its reaction with dithizone. Lead(II) from cassava was extracted using an ultraviolet-digestion unit followed by the color-forming reaction and image capture using the ColorConc application operated on an iPod touch. The concentration was predicted by comparing the color values with those collected in a database. The time needed for complete digestion was 30?min. The determined concentrations of lead(II) were from 0.10 to 1.00?µg mL^?1. The limits of detection and quantitation were 0.0120 and 0.0399?µg mL^?1, respectively. The recovery values were 105?±?7.07% and 109?±?6.61% at 0.2?µg mL^?1 and 0.4?µg mL^?1 lead(II) (n?=?5). The reported method was demonstrated to be simple, accurate, rapid, precise, and low cost.     

Determination trace amounts of thallium after separation and preconcentration onto nanoclay loaded with 1-(2-pyridylazo)-2-naphthol as a new sorbent

A procedure has been proposed for the separation and preconcentration of trace amounts of thallium. It is based on the adsorption of thallium ions onto organo nanoclay loaded with 1-(2-pyridylazo)-2-naphthol (PAN). Thallium ions were quantitatively retained on the column in the pH range of 3.5–6.0, whereas quantitative desorption occurs with 5.0?mL of 5% ascorbic acid and thallium was determined by flame atomic absorption spectrometry. Linearity was maintained between 0.66?ng?mL^?1–15.0?µg?mL^?1?in initial solution. Detection limit was 0.2?ng?mL^?1?in initial solution and preconcentration factor was 150. Eight replicate determinations of 2.0?µg?mL^?1 of thallium in final solution gave a relative standard deviation of ±1.48%. Various parameters have been studied, such as the effect of pH, breakthrough volume and interference of a large number of anions and cations and the proposed method was used to determine thallium ions in water and standard samples. Determination of thallium ions in standard sample showed that the proposed method has good accuracy.     

Biamperometric and Differential Pulse Polarographic Methods for the Assay of Nomifensine Maleate

Abstract

Biamperometric titration and differential pulse polarography (DPP) are described for the analysis of nomifensine maleate powder and commercial capsules (Merital^R -50 mg). The biamperometric method involved the titration in cold dil. HCl medium against 0.01 M - NaN0₂ and electrometric detection of end point. The mean percent recoveries obtained were 100.0 ± 0.87 and 99.2 ± 0.95 for the authentic powder and capsules, respectively. The DPP method was performed by measuring the peak current, i_P, obtained from the recorded differential polarogram under constant 50mV modulation amplitude. The peak current was measured at the peak potential of ? 1.02 V on the dropping mercury electrode (DME) versus Ag/AgCl/KCl (sat.) reference electrode at pH 5.0 (acetate buffer). A linear relationship between peak current and concentration was demonstrated in the range 3 to 30μg ml^?1. The mean percent recovery for the capsules was 103.1 ± 1.26.     

Square wave voltammetric determination of diafenthiuron and its application to water,soil and insecticide formulation

A square wave cathodic stripping voltammetric (SWCSV) method has been developed for the determination of insecticide diafenthiuron. The procedure is based on controlled accumulation of the insecticide on a static hanging mercury drop electrode (SHMDE) at 0.00?mV (vs. Ag/AgCl) in Britton-Robinson buffer solution (pH 7.0). The insoluble mercury compound was reduced at ?510?mV during the cathodic potential scan. The peak currents were linearly related to insecticide concentration between 30.4 and 3200?µg?L^?1 . The detection and quantification limit were 9.1?µg?L^?1 and 30.4?µg?L^?1, respectively. The proposed analytical procedure was applied to natural water and soil samples. The method was extended to direct determination of diafenthiuron in insecticide formulation Polo® 50 WP and average content of 50.3?±?1.7 (m/m) at 90% confidence level, in close agreement with the 50.0% quoted by the manufacturer. HPLC comparison method indicated that accuracy was in agreement with that obtained by the proposed method.     

Colorimetric and Polarographic Methods of Analysis for Prenalterol Hydrochloride

Abstract

Two proposed methods have been described for the determination of prenalterol hydrochloride in acetate buffer (pH=4.1) as authentic material and in tablets form using a (i) colorimetric method based on reduction of ferric iron by prenalterol hydrochloride and subsequent measurement at 511 nm of the red color obtained by the treatment of the resultant ferrous iron with 1, 10-orthophenanthroline, (ii) a differential pulse polarographic method based on nitrosation with 0.1 M NaNO₂/dil. HC1 and consequent recording of the differential pulse polarogram. The differential polarogram was obtained under constant amplitude pulses of 50 mV (DP 50) superimposed on a linearly increasing DC-voltage ramp. The peak height (h), of the polarogram was measured at the peak potential of -0.2V on the dropping mercury electrode (DME) versus Ag/AgCl reference electrode. The linearity ranges observed are 0.6μgfml to 6.0μg/ml and 2μg/ml to 12μg/ml, respectively. The mean percentage recoveries for an authentic sample are 99.5±1.4 and 100.5±0.7, respectively. When applied to tablets claimed to contain 10 mg each, the mean percentages obtained are 99.7±2.3 and 100.6 ±1.5 respectively.     

Simultaneous Determination of Cimetidine and Related Compounds in Pharmaceuticals by HPLC on a Porous Graphitic Carbon Column

A high-performance liquid chromatographic method has been developed for determination of cimetidine and its main related compounds, 4-hydroxymethyl-5-methylimidazol (MH), N-cyano-N',N''-dimethylguanidine (Carbonate), 1-methyl-3-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]sulfonyl]ethyl]guanidine (Guanidine), 2-cyano-1-methyl-3-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]sulfonyl] (Sulfoxide), and 1-[(methylamino)[[2-[[(5-methyl-1H-imidazol-4-yl)methyl]sulfonyl]ethyl]amino]methylene]urea (Amide). Chromatographic separation was achieved on a porous graphitic carbon (PGC) column with a gradient 17:83 to 19:81 (v/v) acetonitrile-0.05 M potassium phosphate buffer containing 0.40% pentane sulfonic acid at pH 2.5. Analysis was performed at a flow-rate of 1 mL min^?1 and the detection wavelength was 228 nm. Calibration plots were linear in the concentration ranges 0.25 to 83 µg mL^?1 for cimetidine and Carbonate, 0.25 to 75 µg mL^?1 for Guanidine, Amide, and Sulfoxide, and 0.25 to 100 µg mL^?1 for MH, with correlation coefficients (R ²) between 0.9990 and 0.9998. The lowest detectable concentration of cimetidine and Amide was 0.07 µg mL^?1; for MH, Carbonate, Guanidine, and Sulfoxide it was 0.06 µg mL^?1. Method repeatability (intraday) and reproducibility (interday) was always less than 2% (n=5). The proposed liquid chromatographic method was successfully used for analysis of commercially available cimetidine dosage forms; recoveries were from 99.2 to 100.8%.     

Synthesis of derivatives and production of antiserum for class specific detection of pyrethroids by indirect ELISA

Two series of haptens including 3-phenoxybenzoic acid (PBA) and 3-(2-chloro-3, 3,3-trifluoroprop-1-enyl)-2,2-dimethylcyclo-propanecarboxylic acid (CF₃MPA) were used to prepare immunogens through attachment of 4-C or 6-C handles. Class selective antibodies were produced by immunising rabbits. Ab502 showed the highest reactivity towards tau-fluvalinate (IC₅₀ 1.3 ng mL^?1), λ-cyhalothrin (IC₅₀ 2.3 ng mL^?1), cyfluthrin (IC₅₀ 2.2 ng mL^?1) and fenpropathrin (IC₅₀ 18.5 ng mL^?1) among the antibodies in a competitive ELISA. The effects of methanol, pH and salt concentration were optimised for maximum efficiency of the ELISA (Enzyme-Linked ImmunoSorbent Assay). Ab502 (1:80000)/2-OVA-1(0.2 µg mL^?1) was chosen for ELISA optimisation. Finally, 0.05 M phosphate buffered saline (PBS) at pH 6.5 containing 30% methanol (v/v) was used to dilute the standards. Target analytes in honey samples were extracted with ethyl acetate by sonication. The samples were spiked with three different concentrations of each compound (tau-fluvalinate, 0.5 ng g^?1, 3 ng g^?1, 12 ng g^?1; λ-cyhalothrin and cyfluthrin 1 ng g^?1, 5 ng g^?1, 65 ng g^?1). The recoveries were 36–59% at the lowest spiking concentration and 61–81% at the higher concentration. This assay might be useful to screen pyrethroid residues in honey or other matrix.