Voltammetric Determination of Rosiglitazone in Pharmaceutical Preparations and Human Plasma

Abstract

The voltammetric behavior of rosiglitazone was studied using direct current (DC_t), differential pulse (DPP), and alternating current (AC_t) polarography. The drug manifests cathodic waves over a pH range of 2–11.2. In Britton‐Robinson buffer (BRb; pH 4), the diffusion current–concentration relationship was found to be rectilinear over a range of 4–24 µg · mL^?1 and 0.1–16 µg · mL^?1 using DC_t and DPP modes, respectively, with minimum limits of detection (LOD) of 0.15 µg · mL^?1 and 0.07 µg · mL^?1 using the DC_t and DDP modes, respectively. The diffusion‐current constant (I _d) was 6.63±0.03 (n=5). The proposed method was successfully applied to the determination of the studied compound both in pure form and in formulations. The mean percentage recoveries in tablets were 100.09±1.18 and 100.85±0.88 (n=5) using DC_t and DPP modes, respectively. Furthermore, the proposed method, adopting the DPP mode, was applied to the determination of rosiglitazone in spiked human plasma and the obtained mean percentage recoveries were 99.14±3.29 (n=4).     

Differential Pulse Polarographic Determination of Moxifloxacin Hydrochloride in Pharmaceuticals and Biological Fluids

Abstract

A simple, fast, sensitive and fully validated differential pulse polarographic (DPP) method for the determination of trace amounts of moxifloxacin in pharmaceutics, serum and urine is reported. Moxifloxacin exhibited irreversible cathodic peak over the pH 5.00–11.00 in Britton–Robinson (B–R) buffer. At pH 10.00 (the analytical pH), a well‐defined peak at ?1.61 V versus saturated calomel electrode was obtained. The current has been characterized as being diffusion‐controlled process. The diffusion current constant (i_d) was 1.48±0.12 and the current–concentration plot was rectilinear over the range from 5×10^?7 to 1×10^?4 M with correlation coefficient (n=10) of 0.995.

The proposed method was applied to commercial tablets and average percentage recovery was in agreement with that obtained by spectrophotometric comparison method. The method was extended to the in vitro determination of moxifloxacin in spiked human serum and urine.     

Colorimetric and Polarographic Methods of Analysis for Prenalterol Hydrochloride

Abstract

Two proposed methods have been described for the determination of prenalterol hydrochloride in acetate buffer (pH=4.1) as authentic material and in tablets form using a (i) colorimetric method based on reduction of ferric iron by prenalterol hydrochloride and subsequent measurement at 511 nm of the red color obtained by the treatment of the resultant ferrous iron with 1, 10-orthophenanthroline, (ii) a differential pulse polarographic method based on nitrosation with 0.1 M NaNO₂/dil. HC1 and consequent recording of the differential pulse polarogram. The differential polarogram was obtained under constant amplitude pulses of 50 mV (DP 50) superimposed on a linearly increasing DC-voltage ramp. The peak height (h), of the polarogram was measured at the peak potential of -0.2V on the dropping mercury electrode (DME) versus Ag/AgCl reference electrode. The linearity ranges observed are 0.6μgfml to 6.0μg/ml and 2μg/ml to 12μg/ml, respectively. The mean percentage recoveries for an authentic sample are 99.5±1.4 and 100.5±0.7, respectively. When applied to tablets claimed to contain 10 mg each, the mean percentages obtained are 99.7±2.3 and 100.6 ±1.5 respectively.     

Colorimetric and Bromometric Determination of Pirbuterol Hydrochloride

Abstract

Two proposed methods are reported for the quantitation of pirbuterol hydrochloride, namely, (i) colorimetric and (ii) titrimetric methods. The colorimetric method is based on coupling betweem diazotized sulphanilamide and pirbuterol hydrochloride. Under the optimum conditions studied, the coupling product exhibits a maximum at 440 nm. Linear relation between absorbance, A, and concentration of pirbuterol hydrochloride is in the range 5–40 μgml^?1. The mean percentage obtained for capsules (Exirel^R ?15 mg) was 100.8 ± 0.7 whereas mean percentage recovery obtained for the authentic drug was 100.5 ± 0.8.

The titrimetric procedure involves bromination of authentic pirbuterol in acid medium and residual titration of excess bromine. The stoichiometry of the reaction was investigated and infra-red analysis, of the bromoderivative was carried out. When applied to capsules the bromometric method gave mean percentage of 100.18 ± 2.25.     

Determination of acipimox in capsules by differential pulse polarography

A differential pulse polarographic (DPP) method has been developed for the determination of acipimox in its pharmaceutical formulations. Using Sörensen buffer pH 6.0 as supporting electrolyte a single, irreversible peak occurred at –0.79 V vs an Ag/AgCl reference electrode. The peak height vs concentration plot was found to be linear over the range of 10^–6 to 6 × 10^–4 mol/l. The detection limit is 60ng/ml. The analysis of a series of 10 Olbetam® 250 mg capsules showed an overall standard deviation of ± 4.18 mg and a S_rel of ± 1.66%, respectively.     

Resolution and Trace Determination of Selected Oxyanions in Binary and Ternary Mixtures by Differential Pulse Polarography

Abstract

Resolution and trace determination of selected oxyanions in binary and ternary mixtures were studied by differential pulse polarography (DPP) at the dropping mercury electrode. The applicability of DPP for the simultaneous determination of the investigated oxyanions (TeO^{2- 4}, VO^? ₃, IO^? ₃, IO^? ₄, and BrO^? ₃) in the binary and ternary mixtures was also examined with regard to the dependence of the DP current on various parameters such as pH, pulse amplitude, scan rate and drop time. Statistical analysis is included on t h e observed concentrations for each of the oxyanions in the mixture and compared with that obtained by the calibration curves. Limits of detection and quantitat - ion have been calculated for the DPP determination of binary and ternary mixtures of these lected oxyanions.     

Electrochemical behavior and determination of L-tryptophan on carbon ionic liquid electrode

A carbon ionic liquid electrode (CILE) was fabricated by mixing N-butylpyridinium hexafluoro-phosphate (BPPF ₆ ) with graphite powder and further used for the investigation on the electrochemical behavior of L-tryptophan (Trp). The fabricated CILE showed good conductivity, inherent electrocatalytic ability and strong promotion to the electron transfer of Trp. On the CILE, an irreversible oxidation peak appeared at 0.948 V (vs. saturated calomel reference electrode). For 5.0 × 10⁻⁵ M Trp the oxidation peak current increased about 5 times and the oxidation peak potential decreased on 0.092 V compared to carbon paste electrode. The results indicated that an electrocatalytic reaction occurred on CILE. The conditions for the electrochemical detection were optimized and the electrochemical parameters of Trp on CILE were carefully investigated. Under the selected conditions, the oxidation peak current showed linear relationship with Trp concentration in the range of 8.0 × 10⁻⁶ ∼1.0 × 10⁻³ M for cyclic voltammetry and the detection limit was estimated as 4.8 × 10⁻⁶ M (3σ). The interferences of other amino acids or metal ions on the determination were tested and the proposed method was successfully applied to the synthetic sample analysis.     

Investigations on Bioanalytical Chemistry Part I. On Differential Pulse Voltammetry of Bilirubin

Abstract

The electrochemical behaviour of the bilirubin in many kinds of supporting electrolytes on a glassy carbon electrode (GCE) and a hanging mercury drop electrode (HMDE) was investigated by means of anodic or cathodic differential pulse voltammetry. The influences of different methods of pre-treatment of the glassy carbon electrode was also discussed. In Na₂B₄.O₇-KH₂PO₄ buffer solution, the linear range was 2×10^?9-1×10^?9 mol/l and the detection limit was 3.3×10^?9 mol/l by anodic differential pulse voltammetry at GCE. A linear relationship holds between the peak current and the concentration of bilirubin in a concentration range of 1×10^?9-4×10^?7 mol/l with good precision and accuracy, and the limit of detection was 2×10^?10 mol/l, when cathodic differential pulse adsorption voltammetry at HMDE was used.     

Electrochemistry and Voltammetric Determination of Adenosine with N‐Hexylpyridinium Hexafluorophosphate Modified Electrode

An ionic liquid N‐hexylpyridinium hexafluorophosphate (HPPF₆) modified carbon paste electrode was fabricated for the sensitive voltammetric determination of adenosine in this paper. Carbon ionic liquid electrode (CILE) was prepared by mixing graphite powder and HPPF₆ together and the CILE was characterized by scanning electron microscopy (SEM) and electrochemical methods. The electrochemical behaviors of adenosine on the CILE were studied carefully. Compared with the traditional carbon paste electrode (CPE), a small negative shift of the oxidation peak potential appeared with greatly increase of the oxidation peak current, which indicated the presence of ionic liquid in the carbon paste not only as the binder but also as the modifier and promoter. Under the optimal conditions the oxidation peak current increased with the adenosine concentration in the range from 1.0×10^?6 mol/L to 1.4×10^?4 mol/L with the detection limit of 9.1×10^?7 mol/L (S/N=3) by differential pulse voltammetry. The proposed method was applied to the human urine samples detection with satisfactory results.     

Electrochemical Study of Interaction Between Clozapine and DNA and Its Analytical Application

Abstract

The interaction between clozapine (CLZ) as an orally administrated antipsychotic drug with double stranded calf thymus DNA (dsDNA) was investigated at electrode surface using differential pulse voltammetry (DPV). Activated carbon paste electrode (CPE) was modified with dsDNA and used for monitoring the changes of the characteristics peak of CLZ in 0.05 M acetate buffer (pH 4.3). The adsorptive stripping voltammetry on dsDNA‐modified carbon paste electrode (dsDNA‐CPE) was used for determination of very low concentration of CLZ. Under optimal conditions, the oxidation peak current is proportional to CLZ concentration in the range of 7×10^?9?1.2×10^?6 mol l^?1 with a detection limit of 1.5×10^?9 mol l^?1 for 180 s accumulation time by DPV. The proposed dsDNA‐CPE was successfully used for determination of CLZ in human serum samples with recovery of 97.0±2.5%.     

Voltammetric Determination of Azidothymidine Using Silver Solid Amalgam Electrodes

A new simple and direct electroanalytical method was developed for the determination of azidothymidine in commercial pharmaceutical preparations. It is based on differential pulse voltammetry at silver solid amalgam electrode with polished surface (p‐AgSAE) or surface modified by mercury meniscus (m‐AgSAE). The electroreduction of azidothymidine in basic media at these electrodes gives rise to one irreversible cathodic peak. Its potential in 0.05 mol L^?1 borate buffer, pH 9.3 at ca. ?1050 mV is comparable to that using hanging mercury drop electrode (HMDE). Achieved limits of quantitation are in the 10^?7 mol L^?1 concentration range for both amalgam electrodes. According to the procedure based on the standard addition technique, the recoveries of known amounts of azidothymidine contained in pharmaceutical preparations available in capsules were 101.4±1.8% (m‐AgSAE), 100.3±3.5% (p‐AgSAE) and 102.0±1.0% (HMDE) (n=10). There was no significant difference between the values gained by proposed voltammetric methods and the HPLC‐UV recommended by the United States Pharmacopoeia regarding the mean values and standard deviations.     

A Fast Made Disposable Glucose Biosensor Incorporating the Oxidase and a Ferrocene in an Alginate Gel

Abstract

A simple procedure is described for co-immobilization of glucose oxidase and dimethylaminomethylferrocene in a sodium alginate gel on the surface of pyrolytic graphite electrode. The film is electrochemically active and the peak current is a function of D-glucose concentration with the apparent Michaelis-Menten constant K_m = (1.2±0.3) × 10^?2 M. The optimal concentration range for biosensoric applications in 0.001–0.010 M.

     

Anodic Oxidation of α‐Lipoic Acid at a Glassy Carbon Electrode and Its Determination in Dietary Supplements

Abstract

Direct electrochemistry of alpha‐lipoic acid (ALA) was performed at a glassy carbon electrode using cyclic, differential pulse and square wave voltammetry over a wide range of pH. The oxidation of ALA is an irreversible process, pH independent, and involves the charge transfer of one electron. The diffusion coefficient of ALA was calculated from the results obtained at pH 6.9 in 0.1 M phosphate buffer and was shown to be D ₀=1.1×10^?5 cm² s^?1. The limits of detection (LOD) and quantification (LOQ) calculated from the results obtained at this pH are 1.8 and 6.1 µM, respectively.

The lipoic acid content in two dietary supplements samples, a syrup containing ALA and capsules of ALA, has been determined directly at the glassy carbon electrode by differential pulse voltammetry using the standard addition method.     

The Determination of Nonelectroactive Anticancer Drug 6‐Thioguanine on DNA‐Modified Gold Electrode

Abstract

A nonelectroactive anticancer drug 6‐thioguanine was determined by differential pulse stripping voltammetry on the DNA‐modified gold electrode. The electrode was prepared by the dry adsorptive method, which is simple and direct. Potassium ferricyanate [K₃Fe(CN)₆] was chosen as an appropriate electroactive indicator to probe and characterize the interaction since the 6‐thioguanine and DNA both are nonelectroactive over the potential range studied. The reductive peak current of K₃Fe(CN)₆ is linear with the concentration of 6‐thioguanine in the range of 2.0×10^?8～8.0×10^?7 mol L^?1. The detection limit is 6.0×10^?9 mol L^?1. The established method was successfully applied to determining trace 6‐thioguanine with the recoveries between 95.7% and 105.6%.     

Cyclic Voltammetric Behavior of Uranyl ion in Sulfuric Acid Solutions. Application to Some Nuclear Materials Characterization

Abstract

The U(VI) reduction at mercury electrode in sulfuric acid solutions was examined by cyclic voltammetry (C. V.). A diffusion coefficient, D, was (5.30 ± 0.08) × 10^?6 cm²/sec was obtained for the depolarizer at 25.0±0.2°C in 1 N K₂SO₄ (pH = 2). In 1 N K₂SO₄/1 N H₂,SO₄ systems the disproportionation of U(V) was found to occur with the constant rate of K_d/[H⁺] = 6.500 ± 1.000 M^?2 sec^?1.

In 1 M H₂SO₄ supporting electrolyte pure kinetic control was achieved over the range of scan rates and uranyl concentration (C) investigated, hence linear correlation between cathodic peak current and C (above 5x10^?6 M) was obtained. Strong complexing oxyanions, such as phosphate and pyrosulphate, do not interfere with the cathodic peak current. Rapid determination of O/U ratios in uranium oxides and of U in mixed U-Th materials were performed respectively in 1 M H₂SO₄/1.5 M H₃PO₄ and 1 M H₂SO₄/0.2 M K₂S₂0₄ supporting media, with a reproducibility of ± 1.3% standard deviation.     

Differential Pulse Voltammetric Determination of Selenocystine and Selenomethionine Using SAM nanoSe0/Vc/SeCys‐Film Modified Au Electrode

The SAM nanoSe⁰/Vc/SeCys‐film modified Au electrode has been prepared to determine selenocystine and selenomethionine. The AFM and SEM showed the special three‐dimensional (3D) network structure of the sol‐gel films. The affinity between nanoparticles and biomolecules created special chemical characters analyzed by the XRD and fluorescence. The modified electrode was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The modified films partly had resistance in the charge transduction of Fe(CN) , but the less electron‐transfer resistance. Differential pulse voltammetric (DPV) determination of selenoamino acids using SAM nanoSe⁰/Vc/SeCys‐film modified Au electrode was presented. In PBS (pH 7.0)+0.1 mol L^?1 NaClO₄ solution, selenoamino acids yielded a sensitive reduction peak at about +400±50 mV. The peak current had a linear relationship with the concentration of selenoamino acids in the range of 5.0×10^?8–1.0×10^?5 mol L^?1, and a 3σ detection limit of selenoamino acids was 1.2×10^?8 mol L^?1. The relative standard deviation of DPV signals of 0.50×10^?6 mol L^?1 selenoamino acids was 3.8% (n=8) using the same electrode and was 4.4% (n=5) when using three modified electrodes prepared at different times. The content of selenoamino acids in the organo‐selenium powder were determined by DPV. The results showed 71.5 μg g^?1 of SeCys and 65.1 μg g^?1 of SeMet in the organo‐selenium powder.     

Voltammetric Determination of L‐Dopa Using a Carbon Nanotubes‐Nafion Modified Glassy Carbon Electrode

Abstract

A method for determination of L‐dopa by the adsorption stripping voltammetry (ASV) using a multiwalled carbon nanotubes (MWNTs)–Nafion modified glassy carbon electrode (GMGCE) was proposed. This chemically modified electrode (CME) shows a better stability. A sensitive oxidation peak was observed and the anodic peak potential is ca. 0.374V (vs. SCE). The influences of various experimental parameters on the current peak were completely studied. Under the optimized condition, the method has been applied to the determination of L‐dopa in samples. There is a good linear relationship between the peak current (i_p) and L‐dopa concentration in the range of 3.5×10^?7～1.5×10^?5 mol/L, with the limit of detection 5.0×10^?8 mol/L.     

The Electrochemical Behavior of α‐Ketoglutarate at the Hanging Mercury Drop Electrode in Acidic Aqueous Solution and Its Practical Application in Environmental and Biological Samples

The voltammetric behavior of α‐ketoglutarate (α‐KG) at the hanging mercury drop electrode (HMDE) has been investigated in acetate buffer solution. Under the optimum experimental conditions (pH 4.5, 0.2 M NaAc‐HAc buffer solution), a sensitive reductive wave of α‐KG was obtained by linear scan voltammetry (LSV) and the peak potential was ?1.18 V (vs. SCE), which was an irreversible adsorption wave. The kinetic parameters of the electrode process were α=0.3 and k_s=0.72 1/s. There was a linear relationship between peak current i_{p, α‐KG} and α‐KG concentration in the range of 2×10^?6–8×10^?4 M α‐KG. The detection limit was 8×10^?7 M and the relative standard deviation was 2.0% (C_α‐KG=8×10^?4 M, n=10). Applications of the reductive wave of α‐KG for practical analysis were addressed as follows: (1) It can be used for the quantitative analysis of α‐KG in biological samples and the results agree well with those obtained from the established ultraviolet spectrophotometric method. (2) Utilizing the complexing effect between α‐KG and aluminum, a linear relationship holds between the decrease of peak current of α‐KG Δi_p and the added Al concentration Cequation/tex2gif-inf-5.gif in the range of 5.0×10^?6–2.5×10^?4 M. The detection limit was 2.2×10^?6 M and the relative standard deviation was 3.1% (Cequation/tex2gif-inf-6.gif=4×10^?5 M, n=10). It was successfully applied to the detection of aluminum in water and synthetic biological samples with satisfactory results, which were consistent with those of ICP‐AES. (3) It was also applied to study the effect of Al^III on the glutamate dehydrogenase (GDH) activity in the catalytically reaction of α‐KG+NH +NADH?L ‐glutamate+NAD⁺+H₂O by differential pulse polarography (DPP) technique. By monitoring DPP reductive currents of NAD⁺ and α‐KG, an elementary important result was found that Al could greatly affect the activity of GDH. This study could be attributed to intrinsic understanding of the aluminum's toxicity in enzyme reaction processes.     

Electrocatalytic Determination of Ampicillin Using Carbon-Paste Electrode Modified with Ferrocendicarboxylic Acid

Abstract

A carbon-paste electrode spiked with ferrocenedicarboxylic acid (FDCMCPE) was constructed by incorporation of ferrocenedicarboxylic acid in a graphite powder–paraffin oil matrix. It has been shown by direct current cyclic voltammetry and double-step chronoamperometry that this electrode can catalyze the oxidation of ampicillin (AMPC) in aqueous buffered solution. It has been found that under the optimum condition (pH 10.0) in cyclic voltammetry, the oxidation of AMPC occurred at a potential of about 480 mV on the surface of the modified carbon-paste electrode. The kinetic parameters such as electron-transfer coefficient, α, and rate constant for the chemical reaction between AMPC and redox sites in FDCMCPE were also determined using electrochemical approaches. Under the optimized conditions, the electrocatalytic oxidation peak current of AMPC showed two linear dynamic ranges with a detection limit of 0.67 µmol L^?1 AMPC. The linear calibration was in the range of 2.34–30 µmol L^?1 and 40–700 µmol L^?1 AMPC using the differential pulse voltammetric method. Finally, this method was also examined as a selective, simple, and precise electrochemical sensor for the determination of AMPC in real samples such as drugs and urine.     

Determination of Trace Amount of Lead(II) in Sweet Fruit‐Flavored Powder Drinks by Differential Pulse Adsorptive Stripping Voltammetry at Carbon Paste Electrode

A new method is described for the determination of lead based on the cathodic adsorptive stripping of the lead–nuclear fast red (NFR) at a carbon paste electrode (CPE). The differential pulse voltammograms of the adsorbed complex of lead–NFR are recorded from ?0.10 to ?0.60 V (versus Ag/AgCl electrode). Optimal conditions were found to be an electrode containing 25% paraffin oil and 75% high purity graphite powder, 4.0×10^?5 mol L^?1 NFR; buffer solution (pH of 3.0), accumulation potential and time, ?0.20 V, 60 and 120 s (for high and low concentration of lead), respectively. The results show that the complex can be adsorbed on the surface of the CPE, yielding one peak at ?0.34 V, corresponding to reduction of NFR in the complex at the electrode. The detection limit was found to be 0.2 ng mL^?1 with a 120s accumulation time. The linear ranges are from 0.5 to 50 (t_acc=120 s) and 50 to 200 ng mL^?1 (t_acc=60 s). Application of the procedure to the determination of lead in lake water, bottled mineral water, synthetic samples and sweet fruit‐flavored powder drinks samples gave good results.