多模型共识偏最小二乘法用于近红外光谱定量分析

将多模型共识偏最小二乘法用于近红外光谱定量分析。利用随机抽取的训练子集建立一系列偏最小二乘模型,选取其中性能较好的部分模型作为成员模型,用这些成员模型来预测未知样品。将该方法用于一组生物样本的近红外光谱与样品中人血清白蛋白、γ-球蛋白以及葡萄糖含量之间的建模研究,并与单模型偏最小二乘法了进行比较。结果 PLS对独立测试集中三种组分进行50次重复预测的平均RMSEP分别为0.1066,0.0853和0.1338,RMSEP的标准偏差分别为0.0174,0.0144和0.0416;而本方法重复预测的平均RMSEP分别为0.0715,0.0750和0.0781,RMSEP的标准偏差分别为0.0033,0.2729×10-4和0.0025。     

近红外光谱法对头孢氨苄粉末药品的非破坏定量分析

采用近红外漫反射光谱法对头孢氨苄粉末药品中主要成分头孢氨苄进行快速、无损定量分析.采用偏最小二乘法建立近红外光谱信息与待测组分含量间的最佳数学校正模型.对3种光谱(SNV光谱、一阶导数、二阶导光谱)的预测结果进行了比较,讨论了光谱的预处理方法和主成分数对偏最小二乘法定量预测能力的影响,并对预测集样品进行预测.     

近红外光谱相似性评估结合局部回归方法无损检测苹果糖度

基于Bayesian相似性评估方法结合偏最小二乘局部回归,对苹果近红外数据库进行数据挖掘。通过相似性计算方法搜索出与预测样品相近的近红外光谱,形成校正子集后采用局部回归方法获得待测样品的相关信息。该方法所建立局部模型的平均检验标准偏差(SEV)约为0.57,分析30个预测样品的预测标准偏差(SEP)约为0.61;基于马氏距离的传统方法建立的偏最小二乘局部模型的平均SEV为0.59,分析30个待测样品的预测SEP为0.64;而采用整个数据库建立的全局偏最小二乘模型的SEV约为0.65,分析30个预测样品SEP约为0.70。基于Bayesian相似性评估的局部回归方法在苹果糖度的近红外无损定量分析中获得较好的应用结果,在实际应用中该方法比全局回归方法具有更强的适用性,为近红外光谱分析提供了新的分析工具。     

偏最小二乘-反向传播-近红外光谱法同时测定饲料中4种氨基酸

偏最小二乘与人工神经网络联用对70个饲料样品建立起天门冬氨酸(Asp)、谷氨酸(Glu)、丝氨酸(Ser)和组氨酸(His)4种氨基酸含量的预测校正模型,以样品平行扫描光谱验证校正模型预测的准确性和重现性。用偏最小二乘法将原始数据压缩为主成分,采用单隐层的反向传播网络建模。取前3个主成分的12个数据输入网络,以Kolmogorov定理为依据,经过实验确定中间层的神经元个数为25,初始训练迭代次数为1000。偏最小二乘-反向传播网络模型对样品4个组分含量的预测决定系数(R2)分别为:0.981、0.997、0.979、0.946;样品平行扫描光谱预测值的标准偏差分别为:0.020、0.029、0.017、0.023。本研究为近红外快速检测在组分含量较低的样品实现多组分同时测定提供了思路。     

基于多模型共识的偏最小二乘法用于近红外光谱定量分析

建立了多模型共识偏最小二乘(cPLS)建模方法, 并应用于烟草样品近红外(NIR)光谱与常规成分氯含量之间的建模研究, 探讨了建模参数对预测结果的影响. 结果表明, cPLS方法与传统的偏最小二乘算法(PLS)相比, 所建模型更稳定可靠, 预测结果也可得到了明显改善.     

小波变换结合多维偏最小二乘方法用于近红外光谱定量分析

将小波变换和多维偏最小二乘法相结合用于近红外光谱定量校正模型的建立.首先将原始光谱进行小波变换分解,得到系列小波细节系数,通过选取一组受外界因素少、信息强的小波系数组成三维光谱阵,然后再采用多维偏最小二乘法建立校正模型.实验结果表明,该方法所建近红外校正模型的预测能力更强,并更具稳健性.     

icPL-ANN近红外光谱分析方法在航空燃料中的应用研究

以航空燃料的闪点预测为例,针对数据分布分散不连续,与光谱信息的线性关联偏弱的情况,提出一种将波段间隔组合与线性-人工神经网络(icPLANN)相结合的近红外光谱定量分析方法。该方法利用分段建模考核进行波段优选,最大程度地提取了有效信息,并结合PL-ANN方法建立了近红外光谱定量分析模型。最终把预测结果与间隔组合偏最小二乘法(icPLS)的实验结果进行了对比。结果表明,间隔组合PL-ANN模型的校正标准偏差(SEC)为0.75,预测标准偏差(SEP)为0.86,而间隔组合偏最小二乘法SEC为1.48,SEP为1.08,因此前一种方法的预测精度更高,预测决定系数(Rp2)能达到0.8971。可见,针对分散不连续数据与近红外光谱的复共线性影响预测模型准确度和稳定性的问题,间隔组合PL-ANN方法是一种有效的近红外光谱定量方法。     

自适应蚁群优化算法的近红外光谱特征波长选择方法

为提高近红外光谱预测模型的精度和适用性,同时简化模型,提出了自适应蚁群优化偏最小二乘法优选特征波长的方法,建立不同产地苹果可溶性固形物含量混合分析模型。收集山东、陕西和新疆的富士苹果,采集3800~14000 cm"1范围的近红外光谱,并对其重要品质指标可溶性固形物含量进行测定。利用蚁群算法启发式全局搜索的特点,结合蒙特卡罗轮盘赌随机选择机制,优选苹果可溶性固形物含量的近红外光谱特征波长,然后用偏最小二乘法建立分析模型。与全光谱偏最小二乘模型和遗传偏最小二乘模型相比,蚁群优化算法选择的波长数最少,模型预测能力最强,预测的相关系数R和预测均方根误差RMSEP分别为0.9708和0.5144。研究结果表明,自适应蚁群优化算法可以有效选择近红外光谱特征波长,提高模型的稳健性和适用性。     

小波变换结合多维偏最小二乘方法用于近红外光谱定量分析

将小波变换和多维偏最小二乘法相结合用于近红外光谱定量校正模型的建立。首先将原始光谱进行小波变换分解，得到系列小波细节系数，通过选取一组受外界因素少、信息强的小波系数组成三维光谱阵，然后再采用多维偏最小二乘法建立校正模型。实验结果表明，该方法所建近红外校正模捌的预测能力更强，并更具稳健性。     

近红外光谱法测定30%TBP/正十二烷中硝酸含量

核燃料后处理工艺控制分析中,有机相中硝酸含量是一项重要的控制参数。通过研究TBP/正十二烷介质中硝酸的近红外光谱,将有机相样品的傅立叶变换近红外光谱与偏最小二乘回归法相结合,建立了含铀后处理有机相样品中硝酸浓度的测量方法。建立的定量校正模型的最佳校正标准偏差(RMSEC)、预测标准偏差(RMSEP)以及相关系数(r)分别为0.011,0.014,0.999。方法检出限为0.05 mol/L,测量结果的相对标准偏差不大于4%(n=6)。采用近红外分析法与滴定法对模拟样品进行测量,对测量结果进行t检验,结果表明两种方法的测定结果无显著性差异。所建方法无需样品预处理,可直接测量,分析速度快,结果准确,具有一定的实用性。     

互信息诱导子空间集成偏最小二乘在近红外光谱定量校正中的应用

在集成框架下,提出了一种联合自助采样和基于互信息变量选择的子空间回归集成偏最小二乘算法MISEPLS.此算法的核心是通过训练集自助采样和随后计算互信息的方式来引入成员模型的差异性.由于互信息量小于一个特定阈值的变量被淘汰,每个成员模型在原始变量的一个子空间得到训练.模型融合考虑了简单平均和加权平均两种方式.通过两个近红外光谱定量校正实验,与建立单模型的全谱偏最小二乘算法(PLS)和基于互信息变量选择的偏最小二乘算法(MIPLS)进行了比较.结果表明,在不增加模型复杂度的情况下,MISEPLS能建立起更精确、更稳健的校正模型.     

Multivariate calibration of spectral data using dual-domain regression analysis

To date, few efforts have been made to take simultaneous advantage of the local nature of spectral data in both the time and frequency domains in a single regression model. We describe here the use of a novel chemometrics algorithm using the wavelet transform. We call the algorithm dual-domain regression, as the regression step defines a weighted model in the time-domain based on the contributions of parallel, frequency-domain models made from wavelet coefficients reflecting different scales. In principle, any regression method can be used, and implementation of the algorithm using partial least squares regression and principal component regression are reported here. The performance of the models produced from the algorithm is generally superior to that of regular partial least squares (PLS) or principal component regression (PCR) models applied to data restricted to a single domain. Dual-domain PLS and PCR algorithms are applied to near infrared (NIR) spectral datasets of Cargill corn samples and sets of spectra collected on batch chemical reactions run in different reactors to illustrate the improved robustness of the modeling.     

Random subspace regression ensemble for near-infrared spectroscopic calibration of tobacco samples.

An ensemble, a model-independent technique based on combining several models for classification/regression tasks, allows us to achieve a high accuracy that is often not achievable with single models. Such combinations have gained increasing attention in many fields. This paper proposes the use of random subspace (RS)-based regression ensemble as an alternative method for near-infrared (NIR) spectroscopic calibration of tobacco samples. Because of the considerable reduction of variables in a random subspace, multiple linear regression (MLR) is used as the base algorithm and the method is therefore also referred to as RS-MLR. The overall performance of the proposed RS-MLR method is compared to those of partial least square regression (PLSR), kernel principal component regression (KPCR) and kernel partial least square regression (KPLSR). The results reveal that the RS-MLR method not only has a simple concept but also can produce a more parsimonious and more accurate calibration model than PLSR, KPCR and KPLSR, at a lower computational cost. Besides, we also found that the RS-MLR method is very appropriate for the so-called small sample problems and that the calibration models built by RS-MLR are less sensitive to overfitting.     

Local classification: Locally weighted–partial least squares-discriminant analysis (LW–PLS-DA)

The possibility of devising a simple, flexible and accurate non-linear classification method, by extending the locally weighted partial least squares (LW–PLS) approach to the cases where the algorithm is used in a discriminant way (partial least squares discriminant analysis, PLS-DA), is presented. In particular, to assess which category an unknown sample belongs to, the proposed algorithm operates by identifying which training objects are most similar to the one to be predicted and building a PLS-DA model using these calibration samples only. Moreover, the influence of the selected training samples on the local model can be further modulated by adopting a not uniform distance-based weighting scheme which allows the farthest calibration objects to have less impact than the closest ones.     

Dual stacked partial least squares for analysis of near-infrared spectra

A new ensemble learning algorithm is presented for quantitative analysis of near-infrared spectra. The algorithm contains two steps of stacked regression and Partial Least Squares (PLS), termed Dual Stacked Partial Least Squares (DSPLS) algorithm. First, several sub-models were generated from the whole calibration set. The inner-stack step was implemented on sub-intervals of the spectrum. Then the outer-stack step was used to combine these sub-models. Several combination rules of the outer-stack step were analyzed for the proposed DSPLS algorithm. In addition, a novel selective weighting rule was also involved to select a subset of all available sub-models. Experiments on two public near-infrared datasets demonstrate that the proposed DSPLS with selective weighting rule provided superior prediction performance and outperformed the conventional PLS algorithm. Compared with the single model, the new ensemble model can provide more robust prediction result and can be considered an alternative choice for quantitative analytical applications.     

主成分回归残差神经网络校正算法用于近红外光谱快速测定汽油辛烷值

根据汽油辛值预测体系本身的非线性特点,提出主成分回归残差神经网络校正算法（principal component regression residual artificial neural network,PCRRANN)用于近红外测定汽油辛烷值的预测模型校正,该方法给合了主成分回归算法（PC）,与经典的线性校正算法（PLS（Partial Least Square),PCR, 以及非线性PLS（NPLS,Non-linear PLS)等相比,预测明显的改善,文中还讨论了PCR主成分数及训练参数对预则模可能的影响。     

段式正交信号校正方法及在小麦近红外光谱数据分析中的应用

针对光谱数据峰宽、局部效应显著、含有噪音、变量个数多及彼此间常存在严重的复共线性等问题,改进和设计一种光谱数据局部校正方法:基于窗口平滑的段式正交信号校正方法,并将之结合偏最小二乘回归,以实现光谱数据的预处理及定量分析。通过NIPALS算法初始化将滤去的正交成分,以近邻分段方式进行逐个波长点的正交信号校正。而后将去噪后的光谱矩阵作为新的自变量阵,通过偏最小二乘回归构建其与性质参变量间的校正模型。通过小麦近红外漫反射光谱数据的应用实验结果表明,本方法正交成分估计稳定,去噪明显,模型的预报性能优于其它方法,PLS成分数减少,模型更加简洁。     

A bootstrapping soft shrinkage approach for variable selection in chemical modeling

In this study, a new variable selection method called bootstrapping soft shrinkage (BOSS) method is developed. It is derived from the idea of weighted bootstrap sampling (WBS) and model population analysis (MPA). The weights of variables are determined based on the absolute values of regression coefficients. WBS is applied according to the weights to generate sub-models and MPA is used to analyze the sub-models to update weights for variables. The optimization procedure follows the rule of soft shrinkage, in which less important variables are not eliminated directly but are assigned smaller weights. The algorithm runs iteratively and terminates until the number of variables reaches one. The optimal variable set with the lowest root mean squared error of cross-validation (RMSECV) is selected. The method was tested on three groups of near infrared (NIR) spectroscopic datasets, i.e. corn datasets, diesel fuels datasets and soy datasets. Three high performing variable selection methods, i.e. Monte Carlo uninformative variable elimination (MCUVE), competitive adaptive reweighted sampling (CARS) and genetic algorithm partial least squares (GA-PLS) are used for comparison. The results show that BOSS is promising with improved prediction performance. The Matlab codes for implementing BOSS are freely available on the website: http://www.mathworks.com/matlabcentral/fileexchange/52770-boss.     

Simultaneous determination of propanol and butanol by a fluorometric enzymatic method based on the intrinsic fluorescence of the enzyme

The application of the intrinsic fluorescence of alcohol dehydrogenase (ADH) for the simultaneous determination of propanol and butanol was investigated by using only one kinetic run. An absolute calibration method (based on a mathematical model derived from the enzymatic reaction) and a multivariate calibration method (partial least squares regression, PLSR) were tested for this purpose. Both methods were applied to synthetic samples of both alcohols with good results.     

Orthogonal signal correction-partial least squares method for simultaneous spectrophotometric determination of cypermethrin and tetramethrin

The simultaneous determination of cypermethrin and tetramethrin mixtures by using spectrophotometric method is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares (PLS) regression, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction (OSC) is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for partial least squares calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 200-350 nm range for 25 different mixtures of cypermethrin and tetramethrin. Calibration matrices were containing 0.1-12.9 and 0.1-13.8 microg mL(-1) for cypermethrin and tetramethrin, respectively. The RMSEP for cypermethrin and tetramethrin with OSC and without OSC were 0.0884, 0.0614 and 0.2915, 0.2309, respectively. This procedure allows the simultaneous determination of cypermethrin and tetramethrin in synthetic and real samples good reliability of the determination was proved.