微极流体向受热面的MHD驻点流动

分析了有均匀横向磁场作用时,导电微极流体垂直冲击受热面时形成的二维驻点流动问题．应用适当的相似转换,将连续、动量、角动量及热量的控制方程,及其相应的边界条件,简化为无量纲形式．然后,利用以有限差分离散化为基础的算法,求解简化了的自相似非线性方程．用Richardson外推法,进一步求精其结果．以图表形式表示磁场参数、微极性参数、Prandtl数对流动和温度场的影响,说明了其解的重要特性．研究表明,随着磁场参数的增大,速度和热边界层厚度变小了．与Newton流体相比较,微极流体的剪应力和传热率出现明显的减少,这对聚合物生产过程中流体的流动和热量控制是有益的．     

二阶非牛顿流体环管流动解析解

本文采用积分变换的方法,找到了一类非牛顿流体在环形管道中不定常流动的解析解,并进行了数值计算,详尽分析了非牛顿性系数和其他各参数对二阶流体不定常流动的影响.指出当二阶流体非牛顿系数相同时,环管流与一般管流相比达到稳定的特征时间较短,并且相应的速度分布、平均速度分布的数值均较小,在外半径相同时,环管流内壁的剪应力较之一般管流,其大小随内半径的大小而变,环管流的外壁剪应力总相应地小于内壁剪应力.     

流经有热源多孔平板并伴有化学反应的传热传质混合对流MHD流动

对流经无限竖直多孔平板的不可压缩粘性导电流体,稳定的传热传质混合对流MHD流动问题,给出了精确解和数值解.假定均匀磁场横向作用于流动方向,考虑了感应磁场及其能量的粘性和磁性损耗.多孔平板有恒定的吸入速度并均匀地混入流动速度.用摄动技术和数值方法求解控制方程.得到了平板上速度场、温度场、感应磁场、表面摩擦力和传热率的分析表达式.相关参数取不同数值时,用图形表示出问题的数值结果.讨论了从平板到流体的Hartmann数、化学反应参数、磁场的Prandtl数,以及包括速度场、温度场、浓度场和感应磁场等其它参数的影响.可以发现,热源/汇或Eckert数的增大,极大地提高了流体的速度值.x-方向的感应磁场随着Hartmann数、磁场的Prandtl数、热源/汇和粘性耗散的增大而增大.但是,研究表明,随着破坏性化学反应(K0)的增大,流动速度、流体温度和感应磁场将减小.对色谱分析系统和材料加工的磁场控制,该研究在热离子反应堆模型、电磁感应、磁流体动力学传输现象中得到了应用.     

放/吸热流体在两个充满多孔材料的竖直平行板之间作不稳定的自然对流

在一个由两块无限竖直平行板组成的管道中,充满着多孔的介质材料,使用Darcy模型(Brinkman模型的推广)的动量方程,连同能量方程,计算不可压缩、粘性、放/吸热流体在该管道中的不稳定自然对流,即Couette流动.流动是由于边界平板有不对称的加热,以及作加速运动所引起.选用合理的无量纲参数,对控制方程进行简化,通过Laplace变换进行解析求解,得到闭式的速度和温度分布曲线解,随后导出表面摩擦力和传热率.发现在竖直管道中的不同剖面,流体的流动及温度分布曲线随着时间而增加,且在运动平板附近更高.特别是,流体的速度和温度随着平板间距的增加而增加,但是,表面摩擦力和热传导率随着平板间距的增加而减小.     

多孔饱和矩形管中粘性随温度变化对熵产、热和流体流动的影响

研究了充填流体-饱和多孔介质的矩形管中,随温度变化的粘性对充分发展强迫对流的影响.采用Darcy流动模型并假设粘性-温度为倒线性关系.管壁视为均匀热通量,即Kays和Craw-ford称为的H边界条件.当流体粘性随温度升高而降低时,管壁的Nusselt数增大.求解速度和温度分布时,利用热力学第二定律求解了局部平均熵产率.根据Brinkman数、Péclet数、粘性变化数、无量纲管壁热通量和管道截面宽高比,给出了熵产率、Bejan数、传热不可逆性和流体流动不可逆性的表达式.这些表达式是该类问题参数研究的基础.可以看出,当管道截面宽高比的增大使熵产率减小时,方形管中流动产生的熵大于矩形管,这类似于Ratts和Raut研究的明流(clear flow)情况.     

均匀自由流动的非牛顿流体中连续表面上的磁流体动力学流动和热传递

分析在平行自由流动的非牛顿黏弹性导电流体中,连续平展表面移动时的稳态流和热传递特性,该流动处于横向均匀磁场作用下.以二阶流体构建它的本构方程,得到了速度分布和温度断面图的数值结果.讨论了诸如黏弹性参数、磁场参数和Prandtl数等不同物理参数对诸种动量和热传递特性的影响,并给出相关图示.     

Jeffrey流体流过有限长圆柱管时磁流体动力学的蠕动流

研究Jeffrey流体流过有限长管道时的蠕动流.在外加磁场作用时,流体呈导电性.分析是在长波长和低Reynolds数近似假设下完成.得到了压力梯度、体积流量、平均体积流量和局部壁面剪应力的表达式.研究了松弛时间、延迟时间和Hartman数,对压力、局部壁面剪应力以及蠕动泵机械效率的影响.还研究了回流现象,调查了沿管道壁波数非整倍数时的传播情况,研究有限长管道传播的内在特性.     

生物磁粘弹性流体的流动:应用动脉电磁过热评估血液的流动,癌症治疗进程

利用生物磁流体动力学(BFD)原理,在生物磁流体经由遭受磁场作用的多孔介质时,研究其流动的基本理论.所研究流体的磁化强度随温度而变化.流体被认为是非Newton流体,其流动由二阶梯度流体方程所控制,并考虑了流体的粘弹性效应.假设管道壁是能够伸展的,管壁表面的速度与到坐标原点的纵向距离成正比.首先将问题简化为包括7个参数的、耦合的非线性微分方程组的求解.将血液看作生物磁流体,并用上述方法分析,目的是计算某些血液的流动参数,并配以适当的数值方法,导数用差分格式近似.计算结果用图形给出,从而在磁场作用下,得到过热状态中关系血液的、血流动力学流动的理论预测.结果清楚地表明,在电磁过热治疗进程期间,磁偶极子对动脉中血液流动特征的影响起着重大作用.该研究引起了临床医学的关注,其结果有益于癌症病人采用电磁过热的治疗.     

竖直平板嵌入非Darcy多孔介质时,数值研究流过平板的不稳定MHD自然对流中的Dufour和Soret效应

就竖直平板嵌入非Darcy多孔介质中,导电流体流过平板时作不稳定的二维磁流体(MHD)双扩散对流,数值研究了Dufour和Soret效应对流动的影响.用Crank-Nicolson型的隐式有限差分法,按三对角矩阵处理,求解无量纲的非线性控制方程.详细地研究了问题中出现的各种参数对不稳定无量纲的速度、温度和浓度曲线的影响.进一步地,给出并分析了表面摩擦因数、Nus-selt数和Sherwood数随时间的变化.研究结果表明,不稳定速度、温度和浓度分布曲线,受Dufour和Soret的影响十分显著.随着Dufour数的增加或者Soret数的减小,表面摩擦因数和Sherwood数都在减小,而Nusselt数在增加.研究发现,当磁场参数增加时,边界层中的速度和温度在减小.     

二阶流体通过径向延伸平面时滑移、黏性耗散、焦耳热对MHD流动的影响

研究了二阶导电的非Newton流体,在一个可径向放射状延伸,并伴有部分滑动表面上的流动及其热交换.部分滑移用一个无量纲的滑移因子控制,其取值范围从0(全黏着)到无穷大(全滑移).使用适当的相似变换,把待求的非线性偏微分方程转化为常微分方程.讨论了边界条件的不足,在无需增加任何边界条件下,使用有效的数值格式,求解所得到的微分方程.部分滑移、磁场交互参数以及二阶流体的参数对速度场和温度场的综合分析发现,滑移量的增加,流体的动力边界层和热边界层增厚.因为当滑移量的增加,允许更多的流体通过该平面,表面摩擦因数的数值下降,并在更高的滑移参数下,摩擦因数趋于0,即流体无黏性地通过.还研究了磁场对速度场和温度场的重要影响.     

Effects of partial slip,viscous dissipation and Joule heating on Von Kármán flow and heat transfer of an electrically conducting non-Newtonian fluid

The steady Von Kármán flow and heat transfer of an electrically conducting non-Newtonian fluid is extended to the case where the disk surface admits partial slip. The fluid is subjected to an external uniform magnetic field perpendicular to the plane of the disk. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The momentum equations give rise to highly non-linear boundary value problem. Numerical solutions for the governing non-linear equations are obtained over the entire range of the physical parameters. The effects of slip, magnetic parameter and non-Newtonian fluid characteristics on the velocity and temperature fields are discussed in detail and shown graphically. Emphasis has been laid to study the effects of viscous dissipation and Joule heating on the thermal boundary layer. It is interesting to find that the non-Newtonian cross-viscous parameter has an opposite effect to that of the slip and the magnetic parameter on the velocity and the temperature fields.     

Effects of slip on steady Bödewadt flow and heat transfer of an electrically conducting non-Newtonian fluid

The steady flow and heat transfer arising due to the rotation of a non-Newtonian fluid at a larger distance from a stationary disk is extended to the case where the disk surface admits partial slip. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The fluid is subjected to an external uniform magnetic field perpendicular to the plane of the disk. The momentum equation gives rise to a highly nonlinear boundary value problem. Numerical solution of the governing nonlinear equations are obtained over the entire range of the physical parameters. The effects of slip, non-Newtonian fluid characteristics and the magnetic interaction parameter on the momentum boundary layer and thermal boundary layer are discussed in detail and shown graphically. It is observed that slip has prominent effects on the velocity and temperature fields.     

Combined effect of magnetic field and heat absorption on unsteady free convection and heat transfer flow in a micropolar fluid past a semi-infinite moving plate with viscous dissipation using element free Galerkin method

The fully developed electrically conducting micropolar fluid flow and heat transfer along a semi-infinite vertical porous moving plate is studied including the effect of viscous heating and in the presence of a magnetic field applied transversely to the direction of the flow. The Darcy-Brinkman-Forchheimer model which includes the effects of boundary and inertia forces is employed. The differential equations governing the problem have been transformed by a similarity transformation into a system of non-dimensional differential equations which are solved numerically by element free Galerkin method. Profiles for velocity, microrotation and temperature are presented for a wide range of plate velocity, viscosity ratio, Darcy number, Forchhimer number, magnetic field parameter, heat absorption parameter and the micropolar parameter. The skin friction and Nusselt numbers at the plates are also shown graphically. The present problem has significant applications in chemical engineering, materials processing, solar porous wafer absorber systems and metallurgy.     

Vibration of fluid-conveying nanotubes subjected to magnetic field based on the thin-walled Timoshenko beam theory

In this article, the flutter vibrations of fluid-conveying thin-walled nanotubes subjected to magnetic field is investigated. For modeling fluid structure interaction, the nonlocal strain gradient thin-walled Timoshenko beam model, Knudsen number and magnetic nanoflow are assumed. The Knudsen number is considered to analyze the slip boundary conditions between the fluid-flow and the nanotube's wall, and the average velocity correction parameter is utilized to earn the modified flow velocity of nano-flow. Based on the extended Hamilton's principle, the size-dependent governing equations and associated boundary conditions are derived. The coupled equations of motion are transformed to a general eigenvalue problem by applying extended Galerkin technique under the cantilever end conditions. The influences of nonlocal parameter, strain gradient length scale, magnetic nanoflow, longitudinal magnetic field, Knudsen number on the eigenvalues and critical flutter velocity of the nanotubes are studied.     

DTM-BF方法和可渗透收缩壁面上带滑移速度的非稳态磁流体力学流动

研究了运动的粘性导电流体中可渗透收缩壁面上非稳态磁流体边界层流动,利用解析和数值方法对问题进行了研究,并考虑了壁面速度滑移的影响．提出了一个新的解析方法（DTM-BF）,并将其应用于求解带有无穷远边界条件的非线性控制方程的近似解析解．对所有的解析结果和数值结果进行了对比,结果显示两者非常吻合,从而证明了DTM-BF方法的有效性．另外,对不同的参数,得到了控制方程双解和单解的存在范围．最后,分别讨论了滑移参数、非稳态参数、磁场参数、抽吸/喷注参数和速度比例参数对壁面摩擦、唯一解速度分布和双解速度分布的影响．     

Numerical study of magnetohydrodynamic viscous plasma flow in rotating porous media with Hall currents and inclined magnetic field influence

A numerical solution is developed for the viscous, incompressible, magnetohydrodynamic flow in a rotating channel comprising two infinite parallel plates and containing a Darcian porous medium, the plates lying in the x–z plane, under constant pressure gradient. The system is subjected to a strong, inclined magnetic field orientated to the positive direction of the y-axis (rotational axis, normal to the x–z plane). The Navier–Stokes flow equations for a general rotating hydromagnetic flow are reduced to a pair of linear, viscous partial differential equations neglecting convective acceleration terms, for primary velocity (u′) and secondary velocity (v′) where these velocities are directed along the x and y axes. Only viscous terms are retained in the momenta equations. The model is non-dimensionalized and shown to be controlled by a number of dimensionless parameters. The resulting dimensionless ordinary differential equations are solved using a robust numerical method, Network Simulation Methodology. Full details of the numerics are provided. The present solutions are also benchmarked against the analytical solutions presented recently by Ghosh and Pop [Ghosh SK, Pop I. An analytical approach to MHD plasma behaviour of a rotating environment in the presence of an inclined magnetic field as compared to excitation frequency. Int J Appl Mech Eng 2006;11(4):845–856] for the case of a purely fluid medium (infinite permeability). We study graphically the influence of Hartmann number (Ha, magnetic field parameter), Ekman number (Ek, rotation parameter), Hall current parameter (Nh), Darcy number (Da, permeability parameter), pressure gradient (Np) and also magnetic field inclination (θ) on primary and secondary velocity fields. Additionally we investigate the effects of these multiphysical parameters on the dimensionless shear stresses at the plates. Both primary and secondary velocity are seen to be increased with a rise in Darcy number, owing to a simultaneous reduction in Darcian drag force. Primary velocity is seen to decrease with an increase in Hall current parameter (Nh) but there is a decrease in secondary velocity. The study finds important applications in magnetic materials processing, hydromagnetic plasma energy generators, magneto-geophysics and planetary astrophysics.     

The numerical modelling of DC electromagnetic pump and brake flow

The interaction of an externally imposed magnetic and electric field on the laminar flow of a conducting fluid in a channel is studied using computational techniques. The Navier-Stokes equations and the equations describing the electromagnetic field are solved simultaneously in a single control volume-type computational fluid dynamic code, in a moderate Hartmann number and interaction parameter regime. The flow considered is two-dimensional, with an imposed magnetic field acting in the third dimension over the central region of the channel and decaying exponentially in the remainder. A pair of electrodes placed at right angles to the magnetic field exercises control over the resultant Lorentz force and hence the velocity profile shape. This configuration has application in direct-current electromagnetic pumps or, conversely, electromagnetic brakes. The initial parabolic flow profile acquires an M-shape / W-shape mode in the magnetic field fringe regions, corresponding to a pump / brake. A novel coupled procedure is described to model magnetohydrodynamic phenomena and is used to explore the effects of the Reynolds number, interaction parameter, and applied voltage on the pump / brake configuration.     

Flow and heat transfer of a non-Newtonian fluid past a stretching sheet with partial slip

The entrained flow and heat transfer of a non-Newtonian third grade fluid due to a linearly stretching surface with partial slip is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero (total adhesion) and infinity (full slip). Suitable similarity transformations are used to reduce the resulting highly nonlinear partial differential equations into ordinary differential equations. The issue of paucity of boundary conditions is addressed and an effective second order numerical scheme has been adopted to solve the obtained differential equations even without augmenting any extra boundary conditions. The important finding in this communication is the combined effects of the partial slip and the third grade fluid parameter on the velocity, skin-friction coefficient and the temperature field. It is interesting to find that the slip and the third grade fluid parameter have opposite effects on the velocity and the thermal boundary layers.     

幂律速度运动表面上磁流体在驻点附近的滑移流动

从理论上研究了具有非线性延伸表面的磁流体在滑移流区的动量传输问题.通过Lie群变换把控制方程组转化为常微分方程组,利用同伦分析方法求得了问题的近似解析解.获得的级数解与文献中的数值解吻合得较好.另外,利用级数解分析滑移参数、磁场强度、速度比率参数、吸入喷注参数和幂律指数对流动的影响.结果显示这些参数对壁剪切力和边界层内流场有较大的影响.     

Aligned magnetic effects through varying permeable bed

The aligned magnetic effects on a steady laminar, viscous, incompressible, conducting fluid down an open inclined channel bounded below by a bed of varying permeability has been studied when the free surface is exposed to atmospheric pressure. Beavers and Joseph slip condition at the interface of the free flow region and the fluid flow in the porous bed and the Darcy’s law in the porous medium have been used. The expressions for velocity, magnetic strength and the mass flow across the cross-section of the channel are obtained.