Structural requirements in chiral diphosphine-rhodium complexes. VIII. Asymmetric hydrogenation of N-acetyldehydroamino acids with rhodium(I) complexes containing chiral carbocyclic analogues of DIOP.

Z--acetamidocinnamic acid was hydrogenated with neutral diphosphine-rhodium(I) complexes containing trans-1,2-bis(diphenylphosphinomethyl) cycloalkanes to give N-acetylphenylalanine: 86 % e.e.-(R) [(1R,2R)-cyclobutane]; 63 % e.e.-(R) [(1R,2R)-cyclopentane]; 35 % e.e.-(S) [(1S,2S)-cyclohexane]; and 82 % e.e.-(R) [(2R,3R)-DIOP]. Similarly, -acetamidoacrylic acid was hydrogenated to give N-acetylalanine: 72 % e.e.-(R) [(1R,2R)-cyclobutane]; 72 % e.e.-(R) [(1R,2R)-cyclopentane]; 40 % e.e.-(S) [(1S,2S)-cyclohexane]; and 73 % e.e.-(R) [(2R,3R)-DIOP].     

Acid–base polyimide blends for the application as electrolyte membranes for fuel cells

The synthesis and characterization of new acid–base polymer blend membranes for the use in polymer electrolyte membrane fuel cell is presented in this paper. A novel polymeric base is synthesized from 1,4,5,8-naphthalenetetracarboxylic dianhydride, 2-bis [4-(4-aminophenoxy)phenyl] hexafluoropropane and diaminoacrydine hemisulfate where the diaminoacrydine hemisulfate contribute the tertiary nitrogen groups to the polyimide backbone. This base polyimide is blended with a polyimide having sulfonic acid group in the main chain. The sulfonated polyimide is synthesized from 1,4,5,8-naphthalene-tetracarboxylic dianhydride (NTDA), 4,4′-diaminobiphenyl 2,2′-disulfonic acid (BDSA), 2-bis [4-(4-aminophenoxy)phenyl] hexafluoropropane (HFBAPP). Various polyimide blends having different molar ratio of sulfonic acid group and acrydine group are synthesized and they are characterized for thermal stability, ion exchange capacity, water uptake, hydrolytic stability and proton conductivity. All the sulfonated polyimides have good thermal stability and exhibited three-step degradation pattern. With the increase in polymeric base content, IEC decreased as AB-0% (2.0640) > AB-10% (2.0058) > AB-20% (1.8792) > AB-30% (1.5686) > AB-40% (1.2670) > AB-50% (1.1690) > AB-75% (0.9098) and water uptake decreased as AB-0% (34.06%) > AB-10% (32.82%) > AB-20% (24.01%) > AB-30% (20.31%) > AB-40% (12.86%) > AB-50% (9.25%) > AB-75% (8.37%). Proton conductivity of the acid–base polyimide blends at 90 °C are AB-0% (0.197) > AB-10% (0.124) > AB-20% (0.122) > AB-30% (0.088) > AB-40% (0.080) > AB-50% (0.034) > AB-75% (0.025). Polyimide blends showed higher hydrolytic stability than the pure acid polyimide. Between the polyimide blends the hydrolytic stability increased with increase in the base polymer content which is attributed to the increase in ionic crosslink density which reduces the polymer swelling and hence the mechanical stability of the membrane increases.     

Prediction of spectroscopic constants for diatomic molecules in the ground and excited states using time-dependent density functional theory

Spectroscopic constants of the ground and next seven low-lying excited states of diatomic molecules CO, N2, P2, and ScF were computed using the density functional theory SAOP/ATZP model, in conjunction with time-dependent density functional theory (TD-DFT) and a recently developed Slater type basis set, ATZP. Spectroscopic constants, including the equilibrium distances r(e), harmonic vibrational frequency omega(e), vibrational anharmonicity omega(e)x(e), rotational constant B(e), centrifugal distortion constant D(e), the vibration-rotation interaction constant alpha(e), and the vibrational zero-point energy E(n)0 were generated in an effort to establish a reliable database for electron spectroscopy. By comparison with experimental values and a similar model with an established larger Slater-type basis set, et-QZ3P-xD, it was found that this model provides reliably accurate results at reduced computational costs, for both the ground and excited states of the molecules. The over all errors of all eight lowest lying electronic states of the molecules under study using the effective basis set are r(e)(+/-4%), omega(e)(+/-5% mostly without exceeding +/-20%), omega(e)x(e)(+/-5% mostly without exceeding 20%, much more accurate than a previous study on this constant of +/-30%), B(e)(+/-8%), D(e)(+/-10%), alpha(e)(+/-10%), and E(n)0(+/-10%). The accuracy obtained using the ATZP basis set is very competitive to the larger et-QZ3P-xD basis set in particular in the ground electronic states. The overall errors in r(e), omega(e)x(e), and alpha(e) in the ground states were given by +/-0.7, +/-10.1, and +/-8.4%, respectively, using the efficient ATZP basis set, which is competitive to the errors of +/-0.5, +/-9.2, and +/-9.1%, respectively for those constants using the larger et-QZ3P-xD basis set. The latter basis set, however, needs approximately four times of the CPU time on the National Supercomputing Facilities (Australia). Due to the efficiency of the model (TD-DFT, SAOP and ATZP), it will be readily applied to study larger molecular systems.     

Ti-mediated addition of diethylzinc to benzaldehyde. The effect of chiral additives

In the presence of a chiral tridentate bissulfonamide, the titanium-mediated addition of diethylzinc to benzaldehyde gave alkylated products ranging from the (R)-enantiomer, formed with an e.e. of 26%, to the (S)-enantiomer, formed in 72% e.e. The enantioselectivity was also affected by the presence of additional chiral mono- and bidentate ligands, with the reactions proceeding via complexes containing the chiral sulfonamide and the additive. The addition of (1R,2R)-1,2-diphenyl-1,2-ethanediamine and (1S,2S)-1,2-diphenyl-1,2-ethanediamine gave the (S)-product with e.e. of 49% and the (R)-product with 16% e.e., respectively, whereas without additives the (R)-product was obtained in 26% e.e. In the presence of (1R,2R)-1,2-diphenyl-1,2-ethanediamine only (i.e. without the chiral sulfonamide), the (S)-product formed with a 3% e.e.     

Asymmetric synthesis of the cis- and trans-stereoisomers of 4-aminopyrrolidine-3-carboxylic acid and 4-aminotetrahydrofuran-3-carboxylic acid

The diastereoselective conjugate addition of lithium (S)-N-benzyl-N-[small alpha]-methylbenzylamide has been successfully applied to the first asymmetric syntheses of cis-(3S,4R)- and trans-(3R,4R)-4-aminotetrahydrofuran-3-carboxylic acids (26% and 25% overall yield respectively, >98% d.e. and >97% e.e. in each case). Furthermore, the most efficient asymmetric synthesis to date of cis-(3R,4R)- and trans-(3R,4S)-4-aminopyrrolidine carboxylic acids is delineated: for cis-(3R,4R), four steps, >98% d.e., 52% overall yield; for trans-(3R,4S), five steps, >98% d.e., 50% overall yield.     

Kinetic resolution of (±)-5-bromo-12-oxa-pentacyclo-[6.2.1.16,9.02,7.02,10]dodeca-4-ene-3-endo-ol and (±)-5-bromo-13-oxa-pentacyclo[6.2.2.16,9.02,7.02,10]trideca-4-ene-3-endo-ol via Pseudomonas-mediated lipase-catalyzed transesterification

The kinetic resolutions of alcohols 1 and 2 were performed using three different types of lipases. From this screening, the high ability of Lipase PS-C ‘Amano’ I in the resolution of these compounds was observed. The transesterification of the racemic alcohol 1 lead to the acetate (−)-3 with 42% yield (e.e. >99% by chiral GC) and to the alcohol (+)-1 with 39% yield after three catalytic cycles (e.e. >99% by chiral GC of the chemically obtained acetate (+)-3). The reaction of racemic alcohol 2 lead to the acetate (−)-4 with 48% yield (e.e. >99% by chiral GC) and to the alcohol (+)-2 with 32% yield after two catalytic cycles (e.e. >99% by chiral GC).     

Mesoporous silica anchored Ru catalysts for highly enantioselective hydrogenation of beta-ketoesters

Recyclable and reusable mesoporous silica anchored Ru catalysts based on 4,4'-substituted BINAPs were synthesized and used for the hydrogenation of beta-alkyl beta-ketoesters with up to 98.6% e.e. and beta-aryl beta-ketoesters with up to 95.2% e.e.     

Reduction asymetrique catalysee par des complexes de metaux de transition IV. synthese d''amines chirales au moyen d''un complexe de rhodium et d''isopropylidene dihydroxy-2,3 bis(diphenylphosphino)-1,4 butane (diop)

A chiral rhodium complex with (+)-diop as ligand is used as a catalyst in asymmetric synthesis leading to amines and N-acyl derivatives. Two kinds of reactions are investigated: asymetric hydrogenation of enamides and hydrosilylation of imines. Good optical yields are observed in the synthesis of N-acetyl -phnenylethylamine (e.e. 45%) and _N-acetyl -phenylpropylamine (e.e. 83%). A strong solvent effect is observed, which can reverse the absolute configuration of _tN-acetyl--phenylethylamine obtained by reduction of its enamide precursor. N-Benzyl--phenyl ethylamine is prepared by hydrosilylation with 65% optical purity. An asymmetric synthesis of 1,2,3,4-tetrahydropapaverine (e.e 38%) and related compounds is described.     

A microbially based approach for the asymmetric synthesis of both enantiomers of R-and S-fluoxetine

Both enantiomers of fluoxetine were synthesized in five steps from ethyl benzoylacetate(1)using microbial-chemical approach with overall yields of 59% and 62% respectively.(S)-Enan-tiomer can be obtained in >99% e.e.by resting cell of baker's yeast and the R form was produced in 81 %e.e.by immobilized Geotrichum sp.G 38.     

对位取代的1,2-二苯基乙烯的合成及其不对称二羟基化反应

近年来,人们对催化不对称二羟基化反应进行了广泛和深入的研究.前文曾报道了邻位取代的(E)-1,2-二苯乙烯的不对称二羟基化反应.本文探讨了对位取代的(E)-1,2-二苯乙烯类化合物的合成.     

烯丙基二异雪松基硼烷的制备及其与羰基化合物的不对称反应

本文以(-)-α-雪松烯为原料, 制备了烯丙基二异雪松基硼烷(Icd~2B-CH~2CH=CH~2). 该手性硼烷很容易与醛反应生成相应的烯丙基取代的手性仲醇, 光学产率在60%e.e.左右. 与潜手性酮反应的光学产率低于30%e.e..     

Selective reduction of racemic 1,2-butylene oxide with (–)-diisopinocampheylborane in the presence of lithium chloride

Two equivalents of 1,2-butylene oxide was reduced with one equivalent of (–)-diisopinocampheylborane lithium chloride (1:0.1) system at 0° and ?20° to give optically active R-2-butanol, 22.0% e.e. and 22.6% e.e., respectively.     

手性螺-环丙烷化合物中手性辅基的区域性转换反应的研究

通过串联的不对称双Michael加成/分子内亲取代反应,一举得到了具有四个新手性中心的螺环/环丙烯类化合物(4).4在丙酮-5%HCl溶液中50℃下发生区域选择性单水解转换反应,得到螺[1-溴-4-羟基-5-氧杂-6-氧代双环[3.3.0]已-2,3'-(4'-亲核氧基-5'-孟氧基丁内酯)](5),化学产率53%～69%,光学纯度d.e≥98%.4在甲醇/TsOH催化下,实现了区域选择性单醇解转换反应,得到螺[1-溴-4-甲氧基-5-氧杂-6-氧代双环[3.1.0]已烷-2,3'-(4'-亲核氧基-5'-孟氧基丁内酯)](6),化学产率50%～78%,光学纯度d.e.≥98%.经元素分析,[α]D^20,UV,IR,1^HNMR,13^CNMR,MS以及X射线四圆衍射测定,确认了它们的化学结构。     

Enantioselective Michael addition of 2-nitropropane to chalcone analogues catalyzed by chiral azacrown ethers based on α-d-glucose and d-mannitol

The chiral monoaza-15-crown-5 type lariat ethers 1 and 2 derived from α-d-glucose and from d-mannitol, respectively, have been applied as phase transfer catalysts in the enantioselective Michael addition of 2-nitropropane to aromatic 3b–c and heteroaromatic 3d–h chalcone analogues. Among the catalysts, the glucose-based 1c with a phosphinoxidobutyl side arm proved to be the most effective, it inducing 34% e.e. for 4b, 59% e.e. for 4c, 80% e.e. for 4d, 64% e.e. for 4e, 17% e.e. for 4f. Catalyst 1a having 3-hydroxypropyl substituent resulted in 81% e.e. for compound 4g. The formation of the (+)-(S)-enantiomer of 4 was preferred using crown ethers 1a–c, while the (−)-(R)-enantiomer was in excess with catalyst 2. The absolute configuration of the Michael adduct 4d was determined by single-crystal X-ray analysis.     

Preparation of halohydrin β-blocker precursors using yeast-catalysed reduction

The preparation of halohydrin β-blocker precursors using yeast-catalysed reduction of α-haloketones was performed. The influence in the yield and e.e. of several process variables was analysed. The (S)-enantioselectivity observed with Saccharomyces cerevisiae can be changed to (R)-enantioselectivity using methyl vinyl ketone as selective inhibitor (25 mM). Using resting fresh cells better yields and e.e.s are observed than using growing cells. Yarrowia lipolytica 1240 resting cells gave 87% yield of (S)-1-chloro-3(1-naphthyloxy)propan-2-ol (99% e.e.). Pichia mexicana 11105 resting cells gave 85% yield of (R)-1-chloro-3(1-naphthyloxy)propan-2-ol (precursor of propranolol) (95% e.e). The reduction process is applied to other α-haloketones, a lower e.e. being obtained the closer the size of the ketone substituents.     

A comparison of the asymmetric hydrogenation catalyzed by rhodium complexes containing chiral ligands with a binaphthyl unit and those with a 5,5′,6,6′,7,7′,8,8′-octahydro-binaphthyl unit

The chiral ligands H₈–BINAPO and H₈–BDPAB were synthesized by reacting chlorodiphenylphosphine with H₈–BINOL and H₈–BINAM, respectively. Applications of these ligands in the Rh-catalyzed enantioselective hydrogenation of a variety of (Z)-acetamido-3-arylacrylic acid methyl esters provided chiral amino acid derivatives with good to excellent enantioselectivities (H₈–BINAPO: up to 84.0% e.e.; H₈–BDPAB: up to 97.1% e.e.). In the hydrogenation of acetamidoacrylic acid, 99% e.e. was obtained when a [Rh(H₈–BDPAB)]⁺ catalyst was used. The catalytic activities and enantioselectivities of [Rh(H₈–BINAPO)]⁺ and [Rh(H₈–BDPAB)]⁺ are substantially better than those obtained with the corresponding rhodium catalysts containing BINAPO (up to 64% e.e.) and BDPAB (up to 92.6% e.e.).     

Asymmetric cyclization of 2-alkenylphenols. A comparative study on the use of palladium(II) and titanium(IV) complexes

The oxidative cyclization of 2-(3-pentenyl)phenol catalyzed by [(η³-pinene)PdOAc]₂ gives optically active (+)-2-vinylchroman (25% e.e.), while (−)-2-(1-hydroxyethyl)chroman (56% e.e.) is formed as a single diastereomer upon treatment with t-BuOOH in the presence of Ti(OⁱPr)₄ and -(+)-diethyl tartrate. 2-(2-Butenyl)phenol also undergoes the Ti-promoted asymmetric cyclization to give (2S,1′R)-(−)-2-(1-hydroxyethyl)-2,3-dihydrobenzofuran (29% e.e.).     

Lithium amide conjugate addition for the asymmetric synthesis of 3-aminopyrrolidines

Conjugate addition of homochiral lithium amides to methyl 4-(N-benzyl-N-allylamino)but-2-enoate, chemoselective N-deprotection and concomitant cyclisation, followed by enolate functionalisation and deprotection allows access to syn- and anti-3,4-disubstituted aminopyrrolidines in > 98% d.e. and > 98% e.e.     

Use of heterogenized dialdimine ligands in asymmetric transfer hydrogenation

Heterogenized dialdimine ligands complexed to iridium were tested in the asymmetric transfer hydrogenation of acetophenone. E.e.s of up to 70% were achieved but the recycling was unsatisfactory. When such ligands were used in asymmetric epoxidation of styrene, a modest e.e. of 15% was achieved.     

Enantioselective solution- and solid-phase synthesis of glutamic acid derivatives via Michael addition reactions

The enantioselective conjugate addition of Schiff base ester derivatives to Michael acceptors either in solution (56–89% e.e.) or on solid-phase (34–82% e.e.) gave optically active unnatural α-amino acid derivatives. The reaction was conducted in the presence of chiral, non-racemic quaternary salts derived from the cinchona alkaloids using neutral, non-ionic phosphazene bases.