单负材料组成一维光子晶体双量子阱结构的共振模

通过传输矩阵方法, 计算模拟了两种单负材料组成一维光子晶体双量子阱结构的透射谱. 研究发现: 由于双量子阱结构双阱之间的相互耦合作用, 共振模发生双重劈裂, 共振峰之间的距离可以通过调节双阱之间的耦合强度控制, 共振模的品质因子可以通过调节外部障碍光子晶体的周期数控制. 并且, 共振模受入射角和光偏振模式的影响都比较小, 适合全方向滤波. 当考虑两种单负材料不同损耗的影响时, 研究结果表明, 电损耗对低频处的共振模影响大, 而磁损耗对高频和低频处的共振模影响都比较大.     

单负材料光子晶体异质结构的频率响应

用传输矩阵方法研究了由两种单负材料构成的光子晶体异质结构的透射特性.结果表明，当异质结构具有零有效折射率时，由于迅衰场表面模共振耦合，在异质结构双周期光子晶体的每一个分界面上都会出现隧穿模.零有效折射率隧穿模不受入射角、电磁波偏振态、结构周期数和晶格常数标度等因素影响，并且具有零相位延迟，这一特性可用来设计零相位延迟全向多通道滤波器件.而位于中心两侧的隧穿模随入射角、结构周期数和晶格常数标度的减小都统一由中心向两侧移动. 关键词： 单负材料 异质结构 传输矩阵     

单负材料一维光子晶体的透射谱特性

利用传输矩阵法研究了单负材料一维光子晶体(AB)m(ADBDB)n(AB)mA的透射谱,发现:透射谱中出现2个共振隧穿模,其位置和间距可由周期数m或n,以及介质层厚度d调节控制。改变m,会出现2个恒定间距的共振隧穿模;改变dA,共振隧穿模间距增大,且当dA≥25mm时,间距增大加剧;改变n,共振隧穿模逐渐趋于简并,当n≥6时,两隧穿模合二为一;改变dD,两共振隧穿模亦逐渐趋于简并,当dD≥20mm时,两隧穿模亦合二为一。这些特性可为利用光子晶体设计可调性高品质单通道、双通道滤波器提供参考。     

对称型单负交替一维光子晶体的能带结构

构造了(AB)^N(BA)^N对称型两种单负材料交替一维光子晶体,利用传输矩阵法进行数值模拟.结果表明：这种单负交替对称型一维光子晶体具有一种特殊带隙结构,该带隙不敏感于入射角和晶格的无序性.在该带隙内出现了两个隧穿模,该隧穿模不敏感于入射角的改变和晶格的无序性,但能带及带隙内的隧穿模却敏感于晶格标度和周期数的变化;随着入射角的改变,带隙两侧的隧穿模趋于简并.这些特性对在利用此结构光子晶体设计双重超窄带滤波器时,具有一定的参考价值. 关键词： 光子晶体 单负材料 光子带隙     

三层单负材料结构中电磁波模分析

本文分析了由负介电常数材料和负磁导率材料交替排列组成的一维三层结构中的电磁波模式,包括传播模及波导模.传播模对应于入射的行波模,着重研究了发生共振隧穿时场分布和透射谱随入射角度的变化关系,发现改变结构参数时共振隧穿频率会劈裂成两个,且这两个隧穿模的频率间距随着中间层厚度的减小而逐渐加大.波导模是指在结构两边的半无限真空中以倏逝场形式存在的电磁模式,分析了它的存在条件即色散关系,发现这种模在材料的交界面处会出现较强的局域场. 关键词： 单负材料 共振隧穿 传播模 波导模     

利用含负折射率材料的光子晶体实现角度滤波器

利用光子晶体的共振隧穿效应，并结合由负折射材料引起的零平均折射率带隙，设计出一种新型的角度滤波器，使得对于某一频率范围内的入射电磁波仅在特定入射角度的波能够全透，而其他角度的波不能透过.这将在微波器件乃至光学器件上有广泛应用. 关键词： 光子晶体 负折射率材料 共振隧穿     

单负材料一维光子晶体超窄带滤波特性研究

用传输矩阵法研究了单负材料一维光子晶体(ABD)m(CBA)n(ABD)m(CBA)n的透射谱。结果表明:当增加周期数m或D层介质厚度dD时,透射谱中的两个隧穿模越加锋锐,但所处频率位置不变;当增加周期数n或C层介质厚度dC时,透射谱中的两个隧穿模向中间靠拢趋于简并;当增加A层介质厚度dA时,透射谱中双隧穿模结构及位置无变化,而当增加B层介质厚度dB时,透射谱中的三模结构向低频方向移动,且逐渐消失;随着入射角θ的增大,透射谱中两隧穿模向禁带中心靠拢。利用单负材料光子晶体的透射谱特性可实现可调性和高品质的单、多通道超窄带滤波功能。     

由单负材料组成的一维对称型光子晶体中的隧穿模

由电单负材料A和磁单负材料B构成了一维对称型光子晶体,数值计算表明其带隙中出现了一隧穿模. 材料层数增加,隧穿模宽度急剧变窄,而其位置不变.隧穿模的位置和宽度对入射角的变化都不太敏感. 材料的几何厚度减小,隧穿模的位置蓝移,而其宽度不变. μ_A, ε_B增加,隧穿模的位置红移,宽度减小. 利用隧穿模的以上特性可以实现对电磁波传播的动态调控.     

半无限周期光子晶体全反射隧穿效应的共振机理

建立了一维半无限周期光子晶体的谐振腔模型.利用谐振腔的共振条件推导出全反射隧穿导带波长满足的解析公式,从理论上解释了一维半无限周期光子晶体的全反射隧穿效应产生的物理机理.利用波长的解析公式对全反射隧穿导带的波长随导带级数、腔光学厚度以及入射角的变化规律进行了研究,解释了一维半无限周期光子晶体的全反射隧穿效应的变化规律.将共振理论的结果与色散法的结果进行比较,其结果吻合.     

半无限周期光子晶体全反射隧穿效应的共振机理

建立了一维半无限周期光子晶体的谐振腔模型.利用谐振腔的共振条件推导出全反射隧穿导带波长满足的解析公式,从理论上解释了一维半无限周期光子晶体的全反射隧穿效应产生的物理机理.利用波长的解析公式对全反射隧穿导带的波长随导带级数、腔光学厚度以及入射角的变化规律进行了研究,解释了一维半无限周期光子晶体的全反射隧穿效应的变化规律.将共振理论的结果与色散法的结果进行比较,其结果吻合.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.