Preparation of Protected β2‐ and β3‐Homocysteine, β2‐ and β3‐Homohistidine,and β2‐Homoserine for Solid‐Phase Syntheses

The Ser, Cys, and His side chains play decisive roles in the syntheses, structures, and functions of proteins and enzymes. For our structural and biomedical investigations of β‐peptides consisting of amino acids with proteinogenic side chains, we needed to have reliable preparative access to the title compounds. The two β³‐homoamino acid derivatives were obtained by Arndt–Eistert methodology from Boc‐His(Ts)‐OH and Fmoc‐Cys(PMB)‐OH (Schemes 2–4), with the side‐chain functional groups' reactivities requiring special precautions. The β²‐homoamino acids were prepared with the help of the chiral oxazolidinone auxiliary DIOZ by diastereoselective aldol additions of suitable Ti‐enolates to formaldehyde (generated in situ from trioxane) and subsequent functional‐group manipulations. These include OH→O^tBu etherification (for β²hSer; Schemes 5 and 6), OH→STrt replacement (for β²hCys; Scheme 7), and CH₂OH→CH₂N₃→CH₂NH₂ transformations (for β²hHis; Schemes 9–11). Including protection/deprotection/re‐protection reactions, it takes up to ten steps to obtain the enantiomerically pure target compounds from commercial precursors. Unsuccessful approaches, pitfalls, and optimization procedures are also discussed. The final products and the intermediate compounds are fully characterized by retention times (t_R), melting points, optical rotations, HPLC on chiral columns, IR, ¹H‐ and ¹³C‐NMR spectroscopy, mass spectrometry, elemental analyses, and (in some cases) by X‐ray crystal‐structure analysis.     

Concise Synthesis of α‐Methylene‐β‐hydroxy‐γ‐carboxy‐γ‐lactams

A concise protocol for the synthesis of α‐methylene‐β‐hydroxy‐γ‐carboxy‐γ‐lactams has been described via alkylation of amino acid derived iminoesters with α‐bromomethylmethacrylate, followed by allylic hydroxylation. All the synthesized compounds have been evaluated for their cytotoxicity on multiple myeloma cancer cell lines.     

Efficient Synthesis of α‐Benzylidene‐γ‐methyl‐γ‐butyrolactones

A concise synthesis of α‐benzylidene‐γ‐methyl‐γ‐butyrolactones 5a – g from substituted benzaldehydes is described. Compounds 1a – g on reaction with phosphorane 2 , provide the pentenoates 3a – g , which can be hydrolyzed to the acids 4a – g . The latter are cyclized to the corresponding butyrolactones 5a – g in excellent yields. The pentenoates 3a – g , on acid catalyzed cyclization, also provide 5a – g in very high yields.     

Physicochemical characterization of α‐chitin, β‐chitin,and γ‐chitin separated from natural resources

We isolated α‐chitin, β‐chitin, and γ‐chitin from natural resources by a chemical method to investigate the crystalline structure of chitin. Its characteristics were identified with Fourier transform infrared (FTIR) and solid‐state cross‐polarization/magic‐angle‐spinning (CP–MAS) ¹³C NMR spectrophotometers. The average molecular weights of α‐chitin, β‐chitin, and γ‐chitin, calculated with the relative viscosity, were about 701, 612, and 524 kDa, respectively. In the FTIR spectra, α‐chitin, β‐chitin, and γ‐chitin showed a doublet, a singlet, and a semidoublet at the amide I band, respectively. The solid‐state CP–MAS ¹³C NMR spectra revealed that α‐chitin was sharply resolved around 73 and 75 ppm and that β‐chitin had a singlet around 74 ppm. For γ‐chitin, two signals appeared around 73 and 75 ppm. From the X‐ray diffraction results, α‐chitin was observed to have four crystalline reflections at 9.6, 19.6, 21.1, and 23.7 by the crystalline structure. Also, β‐chitin was observed to have two crystalline reflections at 9.1 and 20.3 by the crystalline structure. γ‐Chitin, having an antiparallel and parallel structure, was similar in its X‐ray diffraction patterns to α‐chitin. The exothermic peaks of α‐chitin, β‐chitin, and γ‐chitin appeared at 330, 230, and 310, respectively. The thermal decomposition activation energies of α‐chitin, β‐chitin, and γ‐chitin, calculated by thermogravimetric analysis, were 60.56, 58.16, and 59.26 kJ mol^?1, respectively. With the Arrhenius law, ln β was plotted against the reciprocal of the maximum decomposition temperature as a straight line; there was a large slope for large activation energies and a small slope for small activation energies. α‐Chitin with high activation energies was very temperature‐sensitive; β‐Chitin with low activation energies was relatively temperature‐insensitive. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3423–3432, 2004     

13‐cis‐β,β‐Carotene and 15‐cis‐β,β‐carotene

13‐cis‐β,β‐Carotene, C₄₀H₅₆, crystallizes with a complete molecule in the asymmetric unit, whereas 15‐cis‐β,β‐carotene, also C₄₀H₅₆, has twofold symmetry about an axis through the central bond of the polyene chain. The polyene methyl groups are arranged on one side of the polyene chains for each molecule and the 6‐s‐cisβ end groups, with the cyclohexene rings in half‐chair conformations, are twisted out of the planes of the polyene chains by angles ranging from 41.37 (17) to 52.2 (4)°. The molecules in each structure pack so that the arms of one occupy the cleft of the next, and there is significant π–π stacking of the almost‐parallel polyene chains of the 15‐cis isomer, which approach at distances of 3.319 (1)–3.591 (1) Å.     

β‐Peptide Conjugates: Syntheses and CD and NMR Investigations of β/α‐Chimeric Peptides,of a DPA‐β‐Decapeptide,and of a PEGylated β‐Heptapeptide

β³‐Peptides consisting of six, seven, and ten homologated proteinogenic amino acid residues have been attached to an α‐heptapeptide (all d‐ amino acid residues; 4 ), to a hexaethylene glycol chain (PEGylation; 5c ), and to dipicolinic acid (DPA derivative 6 ), respectively. The conjugation of the β‐peptides with the second component was carried out through the N‐termini in all three cases. According to NMR analysis (CD₃OH solutions), the (M)‐3₁₄‐helical structure of the β‐peptidic segments was unscathed in all three chimeric compounds (Figs. 2, 4, and 5). The α‐peptidic section of the α/β‐peptide was unstructured, and so was the oligoethylene glycol chain in the PEGylated compound. Thus, neither does the appendage influence the β‐peptidic secondary structure, nor does the latter cause any order in the attached oligomers to be observed by this method of analysis. A similar conclusion may be drawn from CD spectra (Figs. 1, 3, and 5). These results bode well for the development of delivery systems involving β‐peptides.     

5β,6β‐Epoxy‐17‐oxoandrostan‐3β‐yl acetate and 5β,6β‐epoxy‐20‐oxopregnan‐3β‐yl acetate

In the title compounds, C₂₁H₃₀O₄, (I), and C₂₃H₃₄O₄, (II), respectively, which are valuable intermediates in the synthesis of important steroid derivatives, rings A and B are cis‐(5β,10β)‐fused. The two molecules have similar conformations of rings A, B and C. The presence of the 5β,6β‐epoxide group induces a significant twist of the steroid nucleus and a strong flattening of the B ring. The different C17 substituents result in different conformations for ring D. Cohesion of the molecular packing is achieved in both compounds only by weak intermolecular interactions. The geometries of the molecules in the crystalline environment are compared with those of the free molecules as given by ab initio Roothan Hartree–Fock calculations. We show in this work that quantum mechanical ab initio methods reproduce well the details of the conformation of these molecules, including a large twist of the steroid nucleus. The calculated twist values are comparable, but are larger than the observed values, indicating a possible small effect of the crystal packing on the twist angles.     

17‐Oxo‐5α‐androstane‐3α,4β‐diyl diacetate and 17‐oxo‐5β‐androstane‐3α,4β‐diyl diacetate

The title compounds, both C₂₃H₃₄O₅, are the 5α and 5β configurations of two diacetate epimers. The 5β‐diacetate crystallizes in an hexagonal structure, unusual for steroid molecules. The unit cell has an accessible solvent volume of 358 ų, responsible for clathrate behaviour. The 5β‐epimer also features some shorter than average bond lengths in the 3α,4β‐acetoxy groups. The conformations of the molecules of both epimers are compared with those obtained through abinitio quantum chemistry calculations. Cohesion of the crystals can be attributed to van der Waals and weak molecular C—H⋯O interactions.     

γ,δ‐ and δ,ε‐Unsaturated Aldehydes from γ‐ and δ‐Lactones in One Step. Preliminary Communication

A one‐step transformation of γ‐ and δ‐(spiro)lactones into γ,δ‐ and δ,ε‐unsaturated aldehydes with an excess of formic acid in the vapor phase over a supported manganese catalyst is described for the first time. The scope and limitations of this new reaction are shown with different lactones as substrate, and a mechanistic rationale is proposed.     

A Novel Synthesis of γ,δ‐Unsaturated Aldehydes from α‐Formyl‐γ‐lactones

A preparatively useful one‐step transformation of γ,γ‐disubstituted α‐formyl‐γ‐lactones into trisubstituted γ,δ‐unsaturated aldehydes is described, by means of catalytic amounts of either AcOH or AcOEt in the vapor phase over a glass support. A mechanistic rationale is proposed.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003