Synthesis of Halogenated α,β‐Unsaturated γ‐Butyrolactone Derivatives by Triphenylphosphine‐Catalyzed Cyclization of α‐Halogeno Ketones with Dialkyl Acetylenedicarboxylates (=Dialkyl But‐2‐ynedioates)

A Ph₃P‐catalyzed cyclization of α‐halogeno ketones 2 with dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) 3 produced halogenated α,β‐unsaturated γ‐butyrolactone derivatives 4 in good yields (Scheme 1, Table). The presence of electron‐withdrawing groups such as halogen atoms at the α‐position of the ketones was necessary in this reaction. Cyclization of α‐chloro ketones resulted in higher yields than that of the corresponding α‐bromo ketones. Dihalogeno ketones similarly afforded the expected γ‐butyrolactone derivatives in high yields.     

Two‐Step Backbiting Reaction in the Ring‐Opening Polymerization of γ‐Acryloyloxy‐ε‐caprolactone Initiated with Aluminium Isopropoxide

γ‐Acryloyloxyethyl‐γ‐butyrolactone is formed as a byproduct when the polymerization of γ‐acryloyloxy‐ε‐caprolactone is initiated with aluminium isopropoxide in toluene. The extent of this side reaction decreases with decreasing temperature and is dependent on whether the reaction is stopped as soon as monomer conversion is complete or not. A two‐step backbiting mechanism is proposed for this intramolecular transesterification reaction.     

Secondary Amine‐Catalyzed Asymmetric γ‐Alkylation of α‐Branched Enals via Dienamine Activation

The direct and enantioselective γ‐alkylation of α‐substituted α,β‐unsaturated aldehydes proceeding under dienamine catalysis is described. We have found that the Seebach modification of the diphenyl‐prolinol silyl ether catalyst in combination with saccharin as an acidic additive promotes an S_N1 alkylation pathway, while ensuring complete γ‐site selectivity and a high stereocontrol. Theoretical and spectroscopic investigations have provided insights into the conformational behavior of the covalent dienamine intermediate derived from the condensation of 2‐methylpent‐2‐enal and the chiral amine. Implications for the mechanism of stereoinduction are discussed.     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

Petrorhagiosides A – D,New γ‐Pyrone Derivatives from Petrorhagia saxifraga Link

Four novel γ‐pyrone (=4H‐pyran‐4‐one) metabolites, petrorhagiosides A–D, along with four known analogs, have been isolated from the MeOH extract of Petrorhagia saxifraga, a perennial herbaceous plant typical of Mediterranean vegetation. The structures of the new compounds were established on the basis of extensive spectroscopic analyses including 1D‐ an 2D‐NMR (¹H,¹H‐DQ‐COSY, TOCSY, HSQC, CIGAR‐HMBC, and HSQC‐TOCSY) experiments.     

Intermolecular Reactions of γ‐Halocarbanions – Stepwise Analogs of 1,3‐Dipolar Cycloaddition

γ‐Halocarbanions, short‐lived intermediates, add to electron‐deficient double bonds of aldehydes, Michael acceptors, and imines to form anionic adducts that enter intramolecular 1,5‐substitution to form five‐membered rings of tetrahydrofurans, cyclopentanes, and pyrrolidines, respectively. Although the γ‐halocarbanions can be generated by simple deprotonation of appropriate precursors, a wealth of other methods based on Lewis acid‐catalyzed opening of cyclopropanes with formation of dipolar species utilizes a similar mechanistic scheme. In our review, we analyze kinetic relations of elementary processes in the multistep transformations, and demonstrate how structural factors influence the mechanisms and selectivity of the reaction.     

Tandem Benzylic Oxidation/Dihydroxylation of α‐Vinyl‐ and α‐Alkenylbenzyl Alcohols

A de novo tandem benzylic oxidative dihydroxylation of α‐vinyl‐ and α‐alkenylbenzyl alcohols has been developed to give α,β‐dihydroxypropiophenones (=2,3‐dihydroxy‐1‐phenylpropan‐1‐ones) and α,β‐dihydroxyalkyl phenones. This method was shown to be substrate‐selective and specific for the oxidation of benzylic alcohols.     

Formation of Periodic γ‐Turns in α/β‐Hybrid Peptides: DFT and NMR Experimental Evidence

Hybrid peptidic oligomers comprising natural and unnatural amino acid residues that can exhibit biomolecular folding and hydrogen‐bonding mimicry have attracted considerable interest in recent years. While a variety of hybrid peptidic helices have been reported in the literature, other secondary structural patterns such as γ‐turns and ribbons have not been well explored so far. The present work reports the design of novel periodic γ‐turns in the oligomers of 1:1 natural‐α/unnatural trans‐β‐norborenene (TNAA) amino acid residues. Through DFT, NMR, and MD studies, it is convincingly shown that, in the mixed conformational pool, the heterogeneous backbone of the hybrid peptides preferentially adopt periodic 8‐membered (pseudo γ‐turn)/7‐membered (inverse γ‐turn) hydrogen bonds in both polar and non‐polar solvent media. It is observed that the stereochemistry and local conformational preference of the β‐amino acid building blocks have a profound influence on accessing the specific secondary fold. These findings may be of significant relevance for the development of molecular scaffolds that facilitate desired positioning of functional side‐chains.     

Hydrolytic degradation of poly(ε‐caprolactone) with different end groups and poly(ε‐caprolactone‐co‐γ‐butyrolactone): characterization and kinetics of hydrocortisone delivery

Asymmetric telechelic α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone) (HA‐PCL), α‐hydroxyl‐ω‐(benzylic ester)‐poly(ε‐caprolactone) (HBz‐PCL), and an asymmetric telechelic copolymer α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone‐co‐γ‐butyrolactone) (HA‐PCB) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL). CL and CL/γ‐butyrolactone mixture were used to obtain homopolymers and copolymer respectively at 150°C and 2 hr using ammonium decamolybdate (NH₄) [Mo₁₀O₃₄] (Dec) as a catalyst. Water (HA‐PCL and HA‐PCB) or benzyl alcohol (HBz‐PCL) were used as initiators. The three polylactones reached initial molecular weights between 2000 and 3000 Da measured by proton nuclear magnetic resonance (¹H‐NMR). Compression‐molded polylactone caplets were allowed to degrade in 0.5 M aqueous p‐toluenesulfonic acid at 37°C and monitored up to 60 days for weight loss behavior. Data showed that the copolymer degraded faster than the PCL homopolymers, and that there was no difference in the weight loss behavior between HA‐PCL and HBz‐PCL. Caplets of the three polylactones containing 1% (w/w) hydrocortisone were placed in two different buffer systems, pH 5.0 with citrate buffer and pH 7.4 with phosphate buffer at 37°C, and monitored up to 50 days for their release behavior. The release profiles of hydrocortisone presented two stages. The introduction of a second monomer in the polymer chain significantly increased the release rate, the degradation rate for HA‐PCB being faster than those for HBz‐PCL and HA‐PCL. At the pH studied, only slight differences on the liberation profiles were observed. SEM micrographs indicate that hydrolytic degradation occurred mainly by a surface erosion mechanism. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile Synthesis of 5‐Hexyl‐4‐methyl‐γ‐butyrolactone via Nef Reaction as a Key Step

A racemic cis/trans mixture of 5‐hexyl‐4‐methyl‐γ‐butyrolactone was easily synthesized from 1‐iodoheptane in four steps with inexpensive and readily available reagents. Our new synthesis method can be potentially employed for mass production of the 4‐methyl‐5‐hexyl‐γ‐butyrolactone as well as other poly‐alkyl substituted γ‐butyrolactones.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Cytotoxic Naphtho‐γ‐pyrones from the Mangrove Endophytic Fungus Aspergillus tubingensis (GX1‐5E)

Four new dimeric naphtho‐γ‐pyrones, named rubasperone D ( 1 ), rubasperone E ( 2 ), rubasperone F ( 3 ), and its atropisomer rubasperone G ( 4 ), together with four known monomeric naphtho‐γ‐pyrones, TMC 256 A1 ( 5 ), rubrofusarin B ( 6 ), fonsecin ( 7 ), and flavasperone ( 8 ), were isolated from the mangrove endophytic fungus Aspergillus tubingensis (GX1‐5E) cultivated in solid rice medium. Their structures were elucidated by spectroscopic methods, including IR, 1D‐ and 2D‐NMR, and MS. In the in vitro cytotoxicity assays, 5 displayed inhibitory activities against tumor cell lines of MCF‐7, MDA‐MB‐435, Hep3B, Huh7, SNB19, and U87 MG with IC₅₀ values between 19.92 and 47.98 μM . Compounds 1, 6 , and 8 also showed mild cytotoxic activity.     

Stereo‐Inversion in the (4R)‐γ‐Decanolactone Synthesis by Saccharomyces cerevisiae: (2E,4S)‐4‐Hydroxydec‐2‐enoic Acid Acts as a Key Intermediate

Methyl (2E,4R)‐4‐hydroxydec‐2‐enoate, methyl (2E,4S)‐4‐hydroxydec‐2‐enoate, and ethyl (±)‐(2E)‐4‐hydroxy[4‐²H]dec‐2‐enoate were chemically synthesized and incubated in the yeast Saccharomyces cerevisiae. Initial C‐chain elongation of these substrates to C₁₂ and, to a lesser extent, C₁₄ fatty acids was observed, followed by γ‐decanolactone formation. Metabolic conversion of methyl (2E,4R)‐4‐hydroxydec‐2‐enoate and methyl (2E,4S)‐4‐hydroxydec‐2‐enoate both led to (4R)‐γ‐decanolactone with >99% ee and 80% ee, respectively. Biotransformation of ethyl (±)‐(2E)‐4‐hydroxy(4‐²H)dec‐2‐enoate yielded (4R)‐γ‐[²H]decanolactone with 61% of the ²H label maintained and in 90% ee indicating a stereoinversion pathway. Electron‐impact mass spectrometry analysis (Fig. 4) of 4‐hydroxydecanoic acid indicated a partial C(4)→C(2) ²H shift. The formation of erythro‐3,4‐dihydroxydecanoic acid and erythro‐3‐hydroxy‐γ‐decanolactone from methyl (2E,4S)‐4‐hydroxydec‐2‐enoate supports a net inversion to (4R)‐γ‐decanolactone via 4‐oxodecanoic acid. As postulated in a previous work, (2E,4S)‐4‐hydroxydec‐2‐enoic acid was shown to be a key intermediate during (4R)‐γ‐decanolactone formation via degradation of (3S,4S)‐dihydroxy fatty acids and precursors by Saccharomyces cerevisiae.     

Transfer Hydrogenation of Ethyl Levulinate to γ‐Valerolactone Catalyzed by Iron Complexes

Conversion of biomass‐derived ethyl levulinate to γ‐valerolactone is realized by using homogeneous iron‐catalyzed transfer hydrogenation (CTH). By utilizing Casey's catalyst and cheap isopropanol as hydrogen source, γ‐valerolactone can be generated in 95% yield. Addition of catalytic amount of base is important to achieve good yield.     

Solid‐state conformations of linear depsipeptide amides with an alternating sequence of α,α‐disubstituted α‐amino acid and α‐hydroxy acid

Depsipeptides and cyclodepsipeptides are analogues of the corresponding peptides in which one or more amide groups are replaced by ester functions. Reports of crystal structures of linear depsipeptides are rare. The crystal structures and conformational analyses of four depsipeptides with an alternating sequence of an α,α‐disubstituted α‐amino acid and an α‐hydroxy acid are reported. The molecules in the linear hexadepsipeptide amide in (S)‐Pms‐Acp‐(S)‐Pms‐Acp‐(S)‐Pms‐Acp‐NMe₂ acetonitrile solvate, C₄₇H₅₈N₄O₉·C₂H₃N, ( 3b ), as well as in the related linear tetradepsipeptide amide (S)‐Pms‐Aib‐(S)‐Pms‐Aib‐NMe₂, C₂₈H₃₇N₃O₆, ( 5a ), the diastereoisomeric mixture (S,R)‐Pms‐Acp‐(R,S)‐Pms‐Acp‐NMe₂/(R,S)‐Pms‐Acp‐(R,S)‐Pms‐Acp‐NMe₂ (1:1), C₃₂H₄₁N₃O₆, ( 5b ), and (R,S)‐Mns‐Acp‐(S,R)‐Mns‐Acp‐NMe₂, C₃₀H₃₇N₃O₆, ( 5c ) (Pms is phenyllactic acid, Acp is 1‐aminocyclopentanecarboxylic acid and Mns is mandelic acid), generally adopt a β‐turn conformation in the solid state, which is stabilized by intramolecular N—H…O hydrogen bonds. Whereas β‐turns of type I (or I′) are formed in the cases of ( 3b ), ( 5a ) and ( 5b ), which contain phenyllactic acid, the torsion angles for ( 5c ), which incorporates mandelic acid, indicate a β‐turn in between type I and type III. Intermolecular N—H…O and O—H…O hydrogen bonds link the molecules of ( 3a ) and ( 5b ) into extended chains, and those of ( 5a ) and ( 5c ) into two‐dimensional networks.     

Theoretical Study Of β2,3‐Peptide Models

Conformational features of α,β‐disubstituted β^2,3‐dipeptide models have been studied with quantum mechanics method. Geometries were optimized with the HF/6‐31G** method, and energies were evaluated with the B3LYP/6‐31G** method. Solvent effect was evaluated with the SCIPCM method. For (2S,3S)‐β^2,3‐dipeptide model 1 , a six‐membered‐ring hydrogen bonded structure is most stable. However, the conformation corresponding to the formation of the 14‐helix is only about 1.7 kcal/mol less stable in methanol solution, indicating that the 14‐helix is favored if a (2S,3S)‐β^2,3‐polypeptide contains more than 5 residues. On the other hand, the conformation corresponding to the formation of β‐sheet is most stable for (2R,3S)‐β^2,3‐dipeptide model 2 , suggesting that this type of β‐peptides is intrinsically favored for the formation of β‐sheet secondary structure.     

Design and Synthesis of α,β‐Epoxyketones as New Anticancer Agents

As epoxy functional group has high anticancer activity, α,β‐epoxyketones were designed and synthesized as new anticancer agents, and their structures were confirmed by UV, ¹H NMR, IR, MS technigeces and elemental analysis. Their in vitro anticancer activities were evaluated by MTT method and the results showed that the compound 4c exhibited good activity with IC₅₀ of 17.8, 22.0 and 24.1 µg/mL against A‐549, Hela and HepG2 cells, respectively. The dose of LD50 of the mice by intragastric administration was 1864.4 mg/kg. Therefore, the α,β‐epoxyketones could potentially provide as new anticancer agents.