从P-Mo(Ⅴ)杂多化合物合成多形貌Al13基钼酸盐晶体

以H₃PMo₁₂O₄0·nH₂O、H₄PMo₁₁VO₄₀·nH₂O和(NH₄)₆P₂Mo₁₈O₆₂·nH₂O 3种杂多化合物为钼源，采用直接混合后陈化的方法合成了多形貌Al₁₃基钼酸盐晶体，相应Al₁₃基钼酸盐晶体的形貌和尺寸分别是斜方三棱柱形(80 μm × 30 μm)、星形(30 μm × 10 μm)和叶片形(500 μm × 150 μm)。粉末X射线衍射结果表明这3种多形貌Al₁₃基钼酸盐晶体结晶较好，在2θ为6.65°、8.00°和14.16°处都有强而尖锐的衍射峰。而以Na₂MoO₄·2H₂O为钼源时只能制得无定形簇合物。根据ICP、FTIR和TG/DTG结果给出多形貌的Al₁₃基钼酸盐晶体的化学简式为Na[AlO₄Al₁₂(OH)₂₄(H₂O)₁₂][MoO₄]₄·8H₂O。初步探讨了Al₁₃基钼酸盐晶体的形成机理。     

无模板剂二次生长法制备取向MFI型分子筛膜

使用旋涂法在多孔α-Al₂O₃载体上获得了b-&h0h-取向的silicalite-1晶种层。在无模板剂存在条件下进行二次生长,通过改变合成液的碱度(OH^-/Si)、水量(H₂O/Si)和晶化温度等,调节膜表面的形貌和晶体取向。SEM和XRD检测结果表明,对于1SiO₂:4EtOH∶xNaOH∶yH₂O合成体系,x与y值的选取与分子筛膜的形貌和晶体取向紧密相关。当x=0.56时,增加y值将促进分子筛膜从随机取向到b-轴取向的转变,晶粒形貌也发生了较大变化;当y=270时,可以得到厚约为4 μm、连续且择优b-轴取向的MFI型分子筛膜。     

水热法合成多金属氧酸盐棒状超细晶体

以SrCl₂·6H₂O、(NH₄)₆P₂Mo₁₈O₆₂·nH₂O为原料，在PEG-600/H₂O微乳体系中于80～130 ℃温度下水热反应8～12 h，从而制得一种多金属氧酸盐棒状超细晶体，组成是Sr₃P₂Mo₁₈O₆₂·nH₂O。该超细晶体具有长棒状形貌、高结晶度且分散性能较好，长度范围在10.0～20.0 μm，径度在1.0～2.0 μm。对反应体系中的PEG-600/H₂O体积比(V_PEC-600∶V_H2O)、水热温度以及(NH₄)₆P₂Mo₁₈O₆₂·nH₂O/SrCl₂·6H₂O质量比(W_POMs∶W_SrCl2·6H2O)3个影响因素进行了探讨，结果表明：V_PEC-600∶V_H2O主要对棒状超细晶体的形貌、长径比以及晶体结晶度有着重要影响，体积比在范围V_PEC-600∶V_H2O=(1.50～2.00)∶1.00有利于大长径比的棒状超细晶体的形成；水热温度则优选80～130 ℃范围，过低则不发生反应，过高则发生了多金属氧酸盐与PEG-600的氧化-还原反应；W_POMs∶W_SrCl2·6H2O基本上不影响超细晶体的形成。还初步探讨了该棒状超细晶体的形成机理。     

三种Er(Ⅲ)配合物的合成、晶体结构及光物理研究

分别以均苯四甲酸,对硝基苯甲酸,肉桂酸为配体,采用水热合成方法,得到了3种Er(Ⅲ)配位聚合物：{[Er₂(btec)_1.5(H₂O)₄]·2H₂O}_n (1),[Er₄(NO₂-C₆H₄COO)₁₂(H₂O)₁₀]·2H₂O (2),[Er(C₉H₇O₂)₃]_n (3)。通过X-光单晶衍射确定了它们的结构。结构分析表明,配合物1是1个具有三维结构的配位聚合物,其构筑单元为{[Er₂(btec)_1.5(H₂O)₄]·2H₂O},每个结构单元中含有4个Er³⁺离子,它们属于2种晶体学类型,以及3个配位方式不同的均苯四甲酸根。配合物2是1个四核配合物,在同1个分子中,含有4个Er³⁺离子,它们也属于2种晶体学类型,在2的晶体中存在大量的氢键。配合物3是1个一维配位聚合物。实验测定了各配合物晶体粉末的FP,IR,UV-Vis-NIR等光谱,对光谱进行了分析指认,对比了3个配合物的近红外发光。     

2，3-吡嗪二甲酸钴(Ⅱ)配合物的合成与结构

在不同的反应介质条件中，用2，3-吡嗪二甲酸(C₄N₂H₂(COOH)₂，简称Pzdc)与Co(NO₃)₂·6H₂O或Co(ClO₄)₂·6H₂O反应，得到了三个新的不同组成的2，3-吡嗪二甲酸钴(Ⅱ)配合物，并进行了表征。通过X射线晶体结构分析，获得了Co(Pz(COO)COOH)₂·2H₂O的晶体学数据，表明Co(Ⅱ)处于由Pzdc中的2个N、2个O及2个配位水中的2个O组成的八面体结构中。同时，我们对CoPz(COO)₂·4H₂O和CoPz(COO)COOH(ClO₄)·4H₂O进行了变温磁化率测试，结果表明这两个化合物都存在弱的反铁磁相互作用。     

铒离子及其阳离子卟啉配合物对金黄色葡萄球菌生长的抑制和刺激作用

用微量热法研究了Er³⁺、TMP{TMP=5，10，15，20-四(4-甲氧基苯基)卟啉}及其阳离子铒卟啉配合物[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌生长作用的生物热动力学特征，求算了在Er³⁺、TMP和[Er(TMP)(H₂O)₃]Cl作用下，金黄色葡萄球菌生长的热动力学参数。实验结果表明：TMP对金黄色葡萄球菌生长的作用表现为单向的抑制作用，而Er³⁺和[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌的生长有双向调节作用。在低浓度下，Er³⁺对金黄色葡萄球菌生长的刺激作用强于[Er(TMP)(H₂O)₃]Cl；在较高浓度下，[Er(TMP)(H₂O)₃]Cl对金黄色葡萄球菌生长的抑制作用显著强于Er³⁺。对金黄色葡萄球菌的抗菌活性为：[Er(TMP)(H₂O)₃]Cl>>TMP>Er³⁺。对相互作用机理做了初步探讨。     

3，3′-偶氮-二(6-羟基苯甲酸)镉和钴的配合物：[Cd(OSA)(Phen)(H2O)]n和[Co(OSA)(Phen)(H2O)]n的合成、表征及晶体结构

利用药物奥沙拉秦钠，邻菲罗啉与Cd(ClO₄)₂·6H₂O或Co(NO₃)₂·6H₂O水热反应分别得到其配合物的晶体[Cd(OSA)(Phen)(H₂O)]_n (1)(OSA=3，3′-偶氮-二(6-羟基苯甲酸))和[Co(OSA)(Phen)(H₂O)]_n (2)。单晶结构分析表明两化合物均为一维链状聚合结构，两者的晶体的空间群皆为C2/c。两化合物中，中心金属的配位几何构型均为五配位的五角双锥。3，3′-偶氮-二(6-羟基苯甲酸)通过羧基桥连金属离子形成一维链状聚合物结构。     

一维链状配位聚合物[M(H2bpb)(H2O)4](SO4)2·6H2O[M=Zn(Ⅱ)，Cu(Ⅱ)]的合成及晶体结构表征

设计并合成了一个含吡啶基团的柔性配体：N，N′-Bis(3-pyridylmethyl)-1，4-benzenedimethylamine(bpb)。通过bpb与硫酸锌及硫酸铜反应得到了两个新型具有一维链状结构的配位聚合物：[M(H₂bpb)(H₂O)₄](SO₄)₂·6H₂O[M=Zn(Ⅱ) 1，Cu(Ⅱ) 2]。X-射线晶体结构测定表明，这两个     

玫瑰花状多孔碱式碳酸镁微球的合成

介绍了一种便利的玫瑰花状多孔碱式碳酸镁(4MgCO₃·Mg(OH)₂·4H₂O)微球的合成方法,该方法分为三水碳酸镁(MgCO₃·3H₂O)前驱物合成与其在水中的热解制备过程。采用搅拌诱导结晶辅助陈化的方法合成前驱物,得到长约115 μm,长径比约10.4的均一微棒,将微棒在353.2 K的水中热解,即可得到由弯曲的纳米片组成的具有“卡片箱”结构（house of cards）的玫瑰花状多孔碱式碳酸镁微球,微球直径为30~60 μm,平均约40 μm,具有良好分散性。研究了热解过程中的形貌转变和相转移过程,采用XRD,FTIR及SEM表征样品的结构和形貌。结果表明：MgCO₃·3H₂O在较高温度下因不稳定而溶解,形成局部过饱和,生成无定形颗粒,并在微棒上成核结晶为4MgCO₃·Mg(OH)₂·4H₂O纳米片。纳米片由与微棒附着部位向外生长,形成玫瑰花状微球,微球长大伴随微棒的消溶,生长在棒上不同部位的颗粒在微观结构上将留有不同痕迹。分析认为热解转变过程是(MgCO₃·3H₂O)溶解－无定形物生成-(4MgCO₃·Mg(OH)₂·4H₂O)结晶的过程。     

碳链长度对芳香异羟肟酸二烃基锡配合物与5’-AMP或DNA相互作用的影响

选择体外筛选活性强的Bu₂Sn(4-FC₆H₄C(O)NHO)₂和活性弱的有机锡化合物Me₂Sn(4-FC₆H₄C(O)NHO)₂为模型,利用高分辨¹H NMR和³¹P NMR 技术比较研究这两个有代表性的有机锡化合物与DNA的基本组成单元5’-AMP在不同时间、不同条件下的作用模式并用紫外法进一步研究其与DNA的相互作用。结果显示,具有不同碳链的有机锡化合物与5’-AMP相互作用明显不同,含较长碳链的Bu₂Sn(4-FC₆H₄C(O)NHO)₂与5’-AMP的作用明显强于Me₂Sn(4-FC₆H₄C(O)NHO)₂,Me₂Sn(4-FC₆H₄C(O)NHO)₂分子可能只与5’-AMP的磷酸骨架静电结合,与整个分子作用较弱,而含丁基的Bu₂Sn(4-FC₆H₄C(O)NHO)₂可能除了与磷酸骨架静电结合,也与疏水碱基具有超分子相互作用而更有利于与5’-AMP稳定结合。Bu₂Sn(4-FC₆H₄C(O)NHO)₂的长链有机配体在与DNA的作用模式上发挥了重要作用。     

Studies of Lead Zirconate Titanate Sol Ageing Part I: Factors Affecting Particle Growth

The formation and growth of polymeric particles during the hydrolysis and condensation of PbZr_0.3Ti_0.7O₃ (PZT 30/70) precursor solutions have been studied as functions of time by using photon correlation spectroscopy (PCS). Particle shape was deduced by measuring the rheological properties of the sols and was found to remain chain-like during sol ageing. Various factors that affect the ageing of PZT sols have been investigated. Ethylene glycol (EG) was found to greatly accelerate the hydrolysis and condensation of the acid-modified Pb-free Zr/Ti solutions but had little effect on the particle growth for the Pb-containing PZT sols. Temperature and H₂O concentration were found to have major effects on the ageing behaviors. The higher the temperature and H₂O concentration, the higher the particle growth rates and the faster the sol gels.     

Application value of a new Cu(II)-coordination polymer in stroke rehabilitation treatment and nursing by reducing oxidative stress in nerve cells

In this current work, through employing the mixed-ligand generation approach, a fresh coordination polymer on the basis of Cu(II), that is, {(H₂bpe)[Cu(HL)₂(bpe)(H₂O)₂]·(H₂O)₄}_n (1) has been created with a reaction between 4-(2′,3′-dicarboxylphenoxy) benzoic acid (H₃L), a semi-rigid tricarboxylate acid and Cu(NO₃)₂·3H₂O, in the existence of the N-donor co-ligand 1,2-bis(4-pyridyl) ethylene (bpe) with HBF₄ as the pH modulator. Its application value in stroke rehabilitation treatment and nursing was explored and the associated mechanism was analyzed simultaneously. Through the molecular docking simulation, those experimentally observed biological activities can be attributed to the hydrogen bonding interactions between the carboxyl groups on the Cu coordination polymer and the active sites on the receptor protein.     

Cationic,neutral and anionic metal(II) complexes derived from 4‐oxo‐4H‐pyran‐2,6‐dicarboxylic acid (chelidonic acid)

The structures of five metal complexes containing the 4‐oxo‐4H‐pyran‐2,6‐dicarboxylate dianion illustrate the remarkable coordinating versatility of this ligand and the great structural diversity of its complexes. In tetraaquaberyllium 4‐oxo‐4H‐pyran‐2,6‐dicarboxylate, [Be(H₂O)₄](C₇H₂O₆), (I), the ions are linked by eight independent O—H...O hydrogen bonds to form a three‐dimensional hydrogen‐bonded framework structure. Each of the ions in hydrazinium(2+) diaqua(4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)calcate, (N₂H₆)[Ca(C₇H₂O₆)₂(H₂O)₂], (II), lies on a twofold rotation axis in the space group P2/c; the anions form hydrogen‐bonded sheets which are linked into a three‐dimensional framework by the cations. In bis(μ‐4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)bis[tetraaquamanganese(II)] tetrahydrate, [Mn₂(C₇H₂O₆)₂(H₂O)₈]·4H₂O, (III), the metal ions and the organic ligands form a cyclic centrosymmetric Mn₂(C₇H₂O₆)₂ unit, and these units are linked into a complex three‐dimensional framework structure containing 12 independent O—H...O hydrogen bonds. There are two independent Cu^II ions in tetraaqua(4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)copper(II), [Cu(C₇H₂O₆)(H₂O)₄], (IV), and both lie on centres of inversion in the space group P; the metal ions and the organic ligands form a one‐dimensional coordination polymer, and the polymer chains are linked into a three‐dimensional framework containing eight independent O—H...O hydrogen bonds. Diaqua(4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)cadmium monohydrate, [Cd(C₇H₂O₆)(H₂O)₂]·H₂O, (V), forms a three‐dimensional coordination polymer in which the organic ligand is coordinated to four different Cd sites, and this polymer is interwoven with a complex three‐dimensional framework built from O—H...O hydrogen bonds.     

Electronic structure and properties of camphorimine Cu(I) coordination polymers

The first Cu(I) coordination polymer with an aromatic‐substituted camphorimine ligand [(CuCl)(μ‐Cl) (Cu(H₂NC₆H₄NC₁₀H₁₄O)]_n was obtained from reaction of CuCl with 3‐(4‐aminophenylimino)‐1,7,7‐trimethylbicyclo[2.2.1]heptan‐2‐one (H₂NC₆H₄NC₁₀H₁₄O). The electronic and the surface properties (studied by X‐ray photoelectron spectroscopy) are consistent with two distinct coordination environments for the copper(I) atoms—tetrahedral and linear—for the polymer family [(CuCl)(μ‐Cl){Cu(YNC₁₀H₁₄O)}]_n. DFT band calculations reveal that the highest energy bands are more localized on the copper(I) tetrahedral sites than on the copper(I) linear sites. The redox properties of [(CuCl)(μ‐Cl){Cu(YNC₁₀H₁₄O)}]_n [Y = NMe₂ ( 2b ), NH₂, and H₂NC₆H₄NC₁₀H₁₄O ( 2a )] studied by cyclic voltammetry show that the oxidation potentials of the two copper centers are in fact indistinguishable. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Evolution of H2O and CO2 during the copper-catalyzed oxidation of isotactic polypropylene

The kinetics and mechanism of H₂O and CO₂ evolution during uncatalyzed and copper(oxide)-catalyzed (Cu, CuO, CuO_0.67) oxidation of isotactic polypropylene have been investigated in detail for various catalysts over a range of temperatures (90–150°C). These volatiles were determined chromatographically; H₂O and CO₂ represent the main volatiles of the oxidation, comprising about 80 mol % of all volatiles. Uncatalyzed oxidation evolves ca. 1 mol of H₂O and 1 mol of CO₂ for each unit mole of polymer oxidized, while catalyzed oxidation produces 2 mol of H₂O and ca. 1.2 mol of CO₂ for each unit mole of polymer. These results indicate that secondary as well as tertiary H atoms on the polymer chains are involved in hydroperoxide formation and decay. The oxidation mechanism has been formulated and evaluated on this basis. It consists essentially of two parallel oxidation reactions involving tertiary and secondary groups (H atoms and hydroperoxides), respectively. The mechanism can be represented by first- and pseudo-first-order reactions in series: (1) oxygen absorption showing induction periods; (2) hydroperoxide formation and decay (plateaus are reached); (3) H₂O evolution from the decay of hydroperoxides; and (4) subsequent CO₂ production involving chain scission. Arrhenius parameters for all oxidation reactions (uncatalyzed and catalyzed) are also presented. It appears that CuO_0.67 is the most efficient catalyst of those investigated.     

Synthesis, crystal structure, and fluorescence properties of a novel coordination polymer [Zn(L)(4,4′-bipyridine)(H2O)] n · (H2O)4

In this work, a novel and rare coordination polymer, [Zn(L)(Bipy)(H₂O)] _n · (H₂O)₄ (H₂L??sphenylpropylmalonate acid, Bipy??4,4??-bipyridine), has been synthesized and characterized by elemental analysis, FT-IR spectroscopy, and solid fluorimetry studies. In the crystal, the Zn²⁺ ion of the complex is hexacoordinated in a slightly distorted octahedral configuration forming the unit structure, 2D structure, and 3D framework. The supramolecular architecture was constructed by a unit of (H₂O)₄ discrete water cluster. Besides, the coordination polymer displays strong emission spectra due to the metal-to-ligand charge-transfer transition, having potential applications as fluorescent materials.     

Thermolysis characteristics of salts of <Emphasis Type="Italic">o</Emphasis>-phthalic acid with the formation of Fe,Co, Ni,Cu metal particles

Studies of the thermolysis of ortho-[Ni(H₂O)₂(C₈H₄O₄)](H₂O)₂, [Cu(H₂O)(C₈H₄O₄)], and acid [M(H₂O)₆](C₈H₅O₄)₂ (M(II) = Fe(II), Co(II), and Ni(II)), [Cu(H₂O)₂(C₈H₅O₄)₂] phthalates reveal that the solid products of their decomposition are composites with nanoparticles embedded in carbon–polymer matrices. Metallic nanoparticles with oxide nanoparticle impurities are detected in iron/cobalt polymer composites, while nickel/copper composites are composed of only metallic particles. It is found that nickel nanoparticles with the diameters of 6–8 nm are covered with disordered graphene layers, while the copperbased composite matrix contains spherical conglomerates (50–200 nm) with numerous spherical Cu particles (5–10 nm).     

Synthesis,Structures, and Luminescent Properties of Two Four‐connected Polymers Based on 2, 2‐Dimethylsuccinic Acid

The polymers [Cd(L)(H₂O)] ( 1 ) and [Zn(L)(4, 4′‐bipy)(H₂O)₃] ( 2 ) (L = 2, 2‐dimethylsuccinated anion) were synthesized under hydrothermal conditions and characterized by IR spectrosopy, elemental analyses, and single‐crystal X‐ray diffraction analysis. The latter reveals that the polymer 1 exhibits a four‐connected dia‐topology net based on the novel tetranuclear Cd^II units, whereas polymer 2 displays a 4‐connnected CdSO₄ topology net. Moreover, the photoluminescent properties of 1 and 2 were investigated.     

Single-step sol-gel deposition and dielectric properties of 0.4 μm thick, (001) oriented Pb(Zr,Ti)O<Subscript>3</Subscript> thin films

Single-step sol–gel deposition was attempted for realizing submicron thick, (001) oriented Pb(Zr_0.53Ti_0.47)O₃ (PZT) thin films, using an alkoxide solution containing polyvinylpyrrolidone (PVP). A solution of molar composition, Pb(NO₃)₂:Zr(OC₃H₇ ⁿ)₄:Ti(OC₃H₇ ⁱ)₄:PVP:H₂O:CH₃COCH₂COCH₃:CH₃OC₂H₄OH:C₃H₇ ⁿOH = 1.1:0.53:0.47:0.5:5:0.5:22:0.98, was prepared as a coating solution. Gel films were prepared on Pt(111)/TiO₂/SiO₂/Si(100) substrates by spin-coating, and calcined at 350 °C and annealed at 650 °C either in an electric furnace or in a near-infrared (IR) furnace. When calcined in the near-IR furnace, the films became (001) oriented on annealing. When calcined in the electric furnace, on the other hand, the films became randomly oriented on annealing. These observations indicate that the heating the gel films from the substrate side in the calcination step at 350 °C induces crystallographic orientation in the annealing step at 650 °C. The effects of the heating methods on the thermal decomposition of the gel films, and the microstructure and dielectric properties of the fired films were studied. Finally 0.4 μm thick, (001) oriented PZT films could be successfully prepared by non-repetitive, single-step deposition. The oriented film thus obtained had the remnant polarization 2P _r of 39 μC/cm² and the dielectric constant ε′ of 960 ± 169.     

Synthesis and Properties of a Novel 3D Europium Coordination Polymer with Helical Chain and (3,6)‐Connected rtl Net

The first coordination polymer of 2,2′‐((4‐carboxymethyl‐1,3‐phenylene)bis(oxy)) diacetic acid (H₃L) with europium(III) ion, [Eu(L)(H₂O)]·3H₂O ( 1 ), has been hydrothermally synthesized and structurally characterized. Complex 1 exhibits a 3D coordination polymer with helical chain and rtl topology of the point symbol (4·6²)₂(4²·6¹⁰·8³) based on [Eu₂(COO)₄] as secondary building unit (SBU). Furthermore, the luminescent and magnetic properties of complex 1 are studied.