某冶炼厂周边土壤重金属污染评价分析及源解析研究

有色金属矿产资源采选冶活动造成的土壤重金属污染已成为严重的环境问题。采用电感耦合等离子体质谱法和光谱法测定某冶炼厂周边不同区域内土壤中重金属Cu、Pb、Zn、As、Ni、Cr、Cd、Hg元素含量,采用Kriging空间插值方法对重金属空间分布特征进行分析,采用内梅罗指数法对其污染状况进行评价,采用多元统计分析对重金属元素的污染源进行分析。结果表明,研究区土壤采样点80%处于污染状态,且以重度污染为主,污染比较严重的区域受风向影响在冶炼厂的西部和南部方向,污染严重的重金属元素为Cu、Pb、Cd、Zn和As,土壤中各重金属元素的污染源除来自于冶炼厂外,Zn-Cd-PbCu-As、Ni-Cr、Hg分别还受到机动车辆排放、自然因素、燃煤及农药使用的影响。     

Multivariate geostatistical analysis of soil contaminations

Soil is one of the most endangered compartments of our environment. The input of pollutants into the soil caused by industrial production, agriculture, and other human activities is a problem of high relevance. A contour analysis of soil contamination is the first step to characterize the size and magnitude of pollution and to detect emission sources of heavy metals. The evaluation and assessment of the large number of measured samples and pollutants require the use of efficient statistical methods which are able to discover both spatial and multivariate relationships. The evaluation of the presented case study – soil contamination by heavy metals – is carried out by means of multivariate geostatistical methods, also described as theory of linear coregionalization. Multivariate geostatistics connects the advantages of common geostatistical methods (spatial correlation) and multivariate data analysis (multivariate relationships). In the given case study of soil pollution by heavy metal emissions it is excellently possible to detect multivariate spatial correlations between different heavy metals in the soil and to determine their common emission sources. These emission sources are located in the area under investigation. Received: 2 October 1997 / Revised: 22 January 1998 / Accepted: 27 January 1998     

Multivariate statistical assessment of polluted soils

This study deals with the application of several multivariate statistical methods (cluster analysis, principal components analysis, multiple regression on absolute principal components scores) for assessment of soil pollution by heavy metals. The sampling was performed in a heavily polluted region and the chemometric analysis revealed four latent factors, which describe 84.5 % of the total variance of the system, responsible for the data structure. These factors, whose identity was proved also by cluster analysis, were conditionally named “ore specific”, “metal industrial”, “cement industrial”, and “steel production” factors. Further, the contribution of each identified factor to the total pollution of the soil by each metal pollutant in consideration was determined.     

Study of occupational health impact of atmospheric pollution on exposed workers at an iron and steel complex by using neutron activation analysis of scalp hair

The occupational health impact of atmospheric pollution on exposed workers at one iron and steel complex was studied by instrumental neutron activation analysis of workers' hair samples and medical examination. The experimental results indicate that there is a positive correlation between the high inhalation amounts of iron and other trace elements by the exposed workers and the symptom of their high blood pressure and hypoglycemia, which implies that the atmospheric environment polluted by iron and steel industry has an adverse health impact on the exposed workers. The measures to relieve and abate the occupational diseases caused by air-borne particulate matter should be taken     

Pollution of agricultural crops with lanthanides,thorium and uranium studied by instrumental and radiochemical neutron activation analysis

The lanthanide elements, Th and U were measured in soils and agricultural crops collected in an area polluted by emissions from a phosphate fertilizer plant. Concentrations of the above elements in the soil and crop samples were determined by instrumental neutron activation analysis (INAA). Selected crop samples were also analyzed using radiochemical neutron activation analysis (RNAA) based on alkaline-oxidative fusion of the irradiated samples followed by precipitation of REE oxalates. Elevated levels of lanthanides, Th and U were found in some samples, especially in wheat chaff and parsley.     

Use of chemometric and geostatistical methods to evaluate pesticide pollution in the irrigation and drainage channels of the Ebro river delta during the rice-growing season

Data sets obtained from quantitative analysis of seventeen pesticides in water samples from a network of irrigation and drainage channels in the Ebro river delta (Catalonia, NE Spain) have been analysed by chemometric and geostatistical methods. Samples were taken at fourteen locations during the main rice-growing season, from May to August 2005. Principal-component analysis enabled investigation of the spatial and temporal distribution of the main pollution patterns caused by application of pesticides in the region under study. A first pesticide-contamination pattern from the Ebro river was differentiated from a second more specific pattern from the water-drainage channels of the delta, collected from the rice fields. The seasonal peak in this more specific rice pesticide source was observed in July. Coupling the results from chemometric data analysis with use of geostatistical methods was shown to be a useful procedure for discovery of the most significant spatial and monthly variations of the main pesticide-contamination patterns, taking into account the particular geographical structure of the area under study.     

L'analyse des surfaces métalliques par spectrométrie d'émission à décharge luminescente

For several years, glow discharge spectrometry has been used at IRSID to characterize the surface layer composition of steel products, in particular, steel sheets. We recall in this communication the basic principle of the Grimm emission source and we discuss the influence of different parameters on the depth resolution of this technique.Some examples are then presented: Control of the surface cleanliness of pure iron (polished sample), study of passivation films formed on a ferritic stainless steel, and depth distribution of carbon on a mild steel sheet. These examples, taken among many others, show the usefulness of this technique for analysing films of varying thickness in the nanometer to micrometer range covering most of the elements which are important for steelmaking.     

Statistical Evaluation of Bioavailability of Metals to Grapes Growing in Contaminated Vineyard Soils using Single Extractants

This article describes the statistical evaluation of concentrations of Cd, Co, Cr, Cu, Fe, Mn. Ni, Pb. Zn, Ca. and Mg metals determined in twenty-two grape and corresponding soil samples from around a zinc smelter in Kayseri. Turkey. In the analyses of soil samples. three different extraetants. 0.1 M HCl in 0.025 M H₂SO₄, 1 M NH₄OAc, and aqua regia (1HNO₃ + 3HCl), were used to extract and determine the leachable metal contents which are acid soluble, exchangeable, and total. respectively. A mixture of HNO₃ and HCIO₄ was used to dissolve grape samples. The determinations of metals were performed by flame atomic absorption spectrometry (FAAS). The analytical data were evaluated by using principal component analysis (PCA). hierarchial cluster analysis (HCA), correlation analysis (CA), and enrichment factors (EF). The relationship between the grapemetal and soil-extractable-metal concentrations was examined to evaluate the bioavailability of metals in soil to grape samples. As a consequence of statistical evaluations. Cd, Pb, Zn. Mn. and Fe labile levels in soil were related to total grape-metal contents indicating the method’s suitability for bioavailability studies in polluted soil–plant systems.     

INAA in Combination with Other Analytical Techniques in the Study of Urban Aerosol Sources

Concentrations of elements in fine and coarse PM10 samples collected in Ho Chi Minh City were determined by INAA for the purpose of characterising air pollution sources using multivariate receptor modeling techniques. Seven sources common to coarse and fine samples were identified. Resuspended soil dust is dominant in the coarse samples accounting for 41% of the particulate mass. In the fine samples, vehicle emissions and coal burning are most important accounting for about 20% each. Although a great number of elements were included in the input data for receptor modeling, the interpretation of emission sources was not always straightforward. Information on other source markers were needed. Therefore, a polarography method was used for quantifying lead, and recently, ion chromatography method became available for quantifying secondary sulphates, nitrates and other water soluble ions.     

金属材料分析国内外标准中波长色散X射线荧光光谱法的应用

对国内外金属材料分析方法标准(包括ASTM、JIS、EN和GB)中应用波长色散X射线荧光光谱法(XRF)的现状,从方法所涵盖的测定元素及其测定的含量范围以及谱线重叠和基体效应的校正等几个方面,并以钢铁分析中的应用为例作了评述。美国材料与试验协会在2012-2016年间先后发布了3个XRF标准方法,分别应用于铸铁、不锈钢、合金钢和低合金钢的分析,测定元素达13项,根据相关钢材的技术规格确定了各元素含量的测定范围。日本工业标准调查会于1997年并于2010年和2013年经修订公布了钢铁XRF分析法JIS标准,可测定各类钢材中主量、次量以及痕量元素达31项,其中镍、铁、钴和测定下限分别延伸至99.5%,50%和60%,从而使此方法有可能扩展应用于镍基、铁镍基和钴基高温合金的分析。我国先后于2007年和2018年由国家标准经主管部门颁布了XRF分析钢铁和高合金钢的两个标准,可测定这2类钢材中的元素为13项和11项,其测定含量范围系根据材料的技术规格确定。关于谱线重叠和基体效应的校正,各标准中在相关部分作了说明,而ASTM有两则独立标准专门论述这两个问题。在此评述对其他金属材料的XRF分析标准也作了介绍(引用文献15篇)。     

Use of spectroscopy of gamma-radiation from the inelastic scattering of reactor fast neutrons for elemental analysis

Gamma-spectra of stainless-steel and soil samples have been measured to study the potentialities of using spectroscopy of γ-radiation from the inelastic scattering of reactor fast neutrons for element analysis of various materials. Contents of iron, chromium, nickel, manganese, silicon and titanium in stainless steel, and those of silicon, iron, aluminium, magnesium, calcium, sodium, titanium, carbon and oxygen in soil have been determined by comparing the spectra of the samples with those of specially prepared mixtures of elements. The distinguishing features, advantages, and limitations of this method are discussed.     

Determination of nitrogen in solids by photon and reactor neutron activation

Carbon and nitrogen were determined in iron, steel, and silicon by photon activation followed by chemical separation. Nitrogen was determined in the same types of samples by reactor neutron activation, chemical separation, and liquid scintillation counting. The comparison of two methods based on different radioactive elements is a way to control the accuracy of the determination.     

Size-fractionated sampling and chemical analysis by total-reflection X-ray fluorescence spectrometry of PMx in ambient air and emissions

PM 10 and PM 2.5 (PMx) have been recently introduced as new air quality standards in the EU (Council Directive 1999/30/EC) for particulate matter. Different estimates and measurements showed that the limit values for PM 10 will be exceeded at different locations in Europe, and thus measures will have to be taken to reduce PMx mass concentrations. Source apportionment has to be carried out, demanding comparable methods for ambient air and emission sampling and chemical analysis. Therefore, a special ambient-air sampler and a specially designed emission sampler have been developed. Total-reflection X-ray fluorescence analysis (TXRF) was used for multi-element analyses as a fast method with low detection limits. For ambient air measurements, a sampling unit was built, impacting particle size classes 10–2.5 μm and 2.5–1.0 μm directly onto TXRF sample carriers. An electrostatic precipitator (ESP) was used as back-up filter to also collect particles <1 μm directly onto the TXRF sample carriers. Air quality is affected by natural and anthropogenic sources, and the emissions of particles <10 μm and <2.5 μm, respectively, have to be determined to quantify their contributions to the so-called coarse (10–2.5 μm) and fine (<2.5 μm) particle modes in ambient air. For this, an in-stack particle sampling system was developed, according to the new ambient air quality standards and in view of subsequent analysis by TXRF. These newly developed samplers, in combination with TXRF analyses, were employed in field campaigns to prove the feasibility and capabilities of the approach. Ambient air data show the quantification of a wide spectrum of elements. From those concentrations, PMx ratios were calculated as an indicator for different sources of elements. Results useful for source apportionment are also the elemental day/night ratios calculated to determine local contributions to PMx mass concentrations. With regard to the emission measurements, results of mass and elemental concentrations obtained in two different processes (steel industry) show that the new PM 10/PM 2.5 cascade impactor and measurements with TXRF give characteristic fingerprints for different sources. Size-fractionated ambient air and emission sampling, together with multi-element analysis, prove to be a useful approach to derive information for source–receptor modeling, a method necessary to set up effective abatement strategies to reduce PMx mass concentrations.     

Neutron activation analysis on sediments from Victoria Land,Antarctica: multi-elemental characterization of potential atmospheric dust sources

The elemental composition of 40 samples of mineral sediments collected in Victoria Land, Antarctica, in correspondence of ice-free sites, is presented. Concentration of 36 elements was determined by instrumental neutron activation analysis, INAA. The selection of 6 standard reference materials and the development of a specific analytical procedure allowed to reduce measurements uncertainties and to verify the reproducibility of the results. The decision to analyze sediment samples from Victoria Land ice-free areas is related to recent investigations regarding mineral dust content in the TALos Dome ICE core (159°11′E; 72°49′S, East Antarctica, Victoria Land), in which a coarse local fraction of dust was recognized. The characterization of Antarctic potential source areas of atmospheric mineral dust is the first step to identify the active sources of dust for the Talos Dome area and to reconstruct the atmospheric pathways followed by air masses in this region during different climatic periods. Principal components analysis was used to identify elements and samples correlations; attention was paid specially to rare earth elements (REE) and incompatible/compatible elements (ICE) in respect to iron, which proved to be the most discriminating elemental groups. The analysis of REE and ICE concentration profiles supported evidences of chemical weathering in ice-free areas of Victoria Land, whereas cold and dry climate conditions of the Talos Dome area and in general of East Antarctica.     

Evolution of surface chemistry during sintering of water-atomized iron and low-alloyed steel powder

Water-atomized iron and steel powder is commonly used as the base material for powder metallurgy (PM) of ferrous components. The powder surface chemistry is characterized by a thin surface oxide layer and more thermodynamically stable oxide particulates whose extent, distribution, and composition change during the sintering cycle due to a complex set of oxidation–reduction reactions. In this study, the surface chemistry of iron and steel powder was investigated by combined surface and thermal analysis. The progressive reduction of oxides was studied using model sintering cycles in hydrogen atmospheres in a thermogravimetric (TG) setup, with experiments ended at intermediate steps (500–1300°C) of the heating stage. The surface chemistry of the samples was then investigated by means of X-ray photoelectron spectroscopy (XPS) to reveal changes that occurred during heating. The results show that reduction of the surface oxide layer occurs at relatively lower temperature for the steel powder, attributed to an influence of chromium, which is supported by a strong increase in Cr content immediately after oxide layer reduction. The reduction of the stable oxide particulates was shifted to higher temperatures, reflecting their higher thermodynamic stability. A complementary vacuum annealing treatment at 800°C was performed in a furnace directly connected to the XPS instrument allowing for sample transfer in vacuum. The results showed that Fe oxides were completely reduced, with segregation and growth of Cr and Mn oxides on the particle surfaces. This underlines the sequential reduction of oxides during sintering that reflects the thermodynamic stability and availability of oxide-forming elements.     

基于生命周期评价技术研究全铁含量测定对环境的影响

利用生命周期评价软件Sima Pro7和环境影响评价模型IMPACT 2002+,通过对化学分析方法的清单分析及计算,评价和比较了3种测定铁矿中全铁含量的化学分析方法(酸溶法、碱熔法、微波消解法)对人类健康、生态质量、气候变化及资源消耗等的影响。发现3个方法对环境的影响主要集中于人类健康危害、气候变化和资源消耗方面。通过计算3种方法的生命周期单一环境负荷值,发现碱熔法、酸溶法和微波消解法的单一环境负荷值分别为1.97,1.81,0.07 m Pt,对环境总体的影响,碱熔法和酸溶法分别为微波消解法的28倍和26倍。单独对人类健康危害指标而言,碱熔法为1.15 m Pt,酸溶法为1.07 m Pt,微波消解法仅为0.039 6 m Pt。碱熔法、酸溶法和微波消解法的碳足迹分别为5.12,4.62,0.189 kg CO_2eq。说明微波消解法排放量最小,其环境友好性最佳,值得推荐。     

Comparison of sensitivity coefficients for spark-source mass spectrometry determined with photographic and electrical detection

Relative sensitivity coefficients have been determined for the spark-source mass-spectrometric analysis of iron and steel samples with photographic and electrical detection. The data differ significantly for elements with mass considerably different from the internal standard, iron, mainly because of the different dependence of the response of the detectors on the ion mass. After correction for this effect and for the smaller influence of ion energy distribution and collector slit setting, fair agreement is obtained between sensitivities in both detection modes.     

Use of the vacuum ultraviolet spectral region for laser-induced breakdown spectroscopy-based Martian geology and exploration

Several elements important to planetary geology (e.g. Br, C, Cl, P, S) and the human exploration of Mars (e.g. toxic elements such as As) have strong emission lines in the purge and vacuum ultraviolet (VUV) spectral region (100–200 nm). This spectral region has not been extensively studied for space applications using geological samples. We studied emissions from the laser-induced breakdown spectroscopy (LIBS) plasma in this region using a sample chamber filled with 7 torr (930 Pa) of CO₂ to simulate the Martian atmosphere. Pressures down to 0.02 torr were also used to evaluate the effect of the residual CO₂ on the spectra and to begin investigating the use of VUV-LIBS for airless bodies such as asteroids and the Moon. Spectra were recorded using a 0.3-m vacuum spectrometer with an intensified CCD (ICCD) camera. The effects of time delay and laser energy on LIBS detection at reduced pressure were examined. The effect of ambient CO₂ on the detection of C in soil was also evaluated. Lines useful for the spectrochemical analysis of As, Br, C, Cl, P, and S were determined and calibration curves were prepared for these elements. Although LIBS is being developed for stand-off analysis at many meters distance, the experiments reported here were aimed at in-situ (close-up) analysis.