1H MAS NMR characterization of hydrogen over silica-supported rhodium catalyst

Hydrogen species in both SiO₂ and Rh/SiO₂catalysts pretreated in different atmospheres (H₂, O₂, helium or air) at different temperatures (773 or 973 K) were investigated by means of¹H MAS NMR. In SiO₂ and O₂-pretreated catalysts, a series of downfield signals at ～7.0, 3.8–4.0, 2.0 and 1.5–1.0 were detected. The first two signals can be attributed to strongly adsorbed and physisorbed water and the others to terminal silanol (SiOH) and SiOH under the screening of oxygen vacancies in SiO₂lattice, respectively. Besides the above signals, both upfield signal at ～?110 and downfield signals at 3.0 and 0.0 were also detected in H₂-pretreated catalyst, respectively. The upfield signal at ～?110 originated from the dissociative adsorption of H₂ over rhodium and was found to consist of both the contributions of reversible and irreversible hydrogen. There also probably existed another dissociatively adsorbed hydrogen over rhodium, which was known to be β hydrogen and in a unique form of “delocalized hydrogen”. It was presumed that the β hydrogen had an upfield shift of ca. ?20–?50, though its¹H NMR signals, which, having been masked by the spinning sidebands of Si-OH, failed to be directly detected out. The downfield signal at 3.0 was assigned to spillover hydrogen weakly bound by the bridge oxygen of SiO₂. Another downfield signal at 0.0 was assigned to hydrogen held in the oxygen vacancies of SiO₂ (Si-H species), suffering from the screening of trapped electrons. Both the spillover hydrogen and the Si-H resulted from the migration of the reversible hydrogen and the β hydrogen from rhodium to SiO₂ in the close vicinity. It was proved that the above migration of hydrogen was preferred to occur at higher temperature than at lower temperature.     

~1H MAS NMR characterization of hydrogen over silica-supported rhodium catalyst

Hydrogen species in both SiO2 and Rh/SiO2 catalysts pretreated in different atmospheres (H2, O2, helium or air) at different temperatures (773 or 973 K) were investigated by means of 1H MAS NMR. In SiO2 and O2-pretreated catalysts, a series of downfield signals at -7.0, 3.8-4.0, 2.0 and 1.5-1.0 were detected. The first two signals can be attributed to strongly adsorbed and physisorbed water and the others to terminal silanol (SiOH) and SiOH under the screening of oxygen vacancies in SiO2 lattice, respectively. Besides the above signals, both upfield signal at -110 and downfield signals at 3.0 and 0.0 were also detected in H2-pretreated catalyst, respectively. The upfield signal at -110 originated from the dissociative adsorption of H2 over rhodium and was found to consist of both the contributions of reversible and irreversible hydrogen. There also probably existed another dissociatively adsorbed hydrogen over rhodium, which was known to be p hydrogen and in a unique form of "delocalized hydrogen". It wa     

Host–guest interactions between niobocene dichloride and α-, β-, and γ-cyclodextrins: preparation and characterization

The possible inclusion complexes of Cp₂NbCl₂ into α-, β-, and γ-CD hosts have been investigated. The existence of a true inclusion complex in the solid state was confirmed by a combination of thermogravimetric analysis, FTIR, PXRD, and ¹³C CP-MAS NMR spectroscopies. The solid-state results demonstrated that α-cyclodextrin does not form inclusion complexes with Cp₂NbCl₂ whereas β- and γ-cyclodextrins do form such complexes. PXRD, NMR, and thermal analysis showed that the organometallic molecules of Cp₂NbCl₂OH are included in the cavities of β- and γ-cyclodextrins, possibly adopting a symmetrical conformation in the complex, with each glucose unit in a similar environment. In solution, ¹H NMR experiments suggest that niobocene has a shallow penetration on the β-CD leading to upfield shift on H-3 signal with a minor perturbation on the H-5 proton while for γ-CD, both H-3 and H-5 are shifted upfield substantially. This suggests that niobocene penetrates deeper into the γ-CD cavity than in the β-CD cavity, as a result of the cavity size. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sol-Gel Processing of Sm2+-Doped Glass and Its Spectral Hole Burning at Room Temperature

The sol-gel process was applied to the preparation of Sm²⁺ ion-doped silicate glasses, which show persistent spectral hole burning at room temperature. The gels synthesized by the hydrolysis of metal alkoxides and SmCl₃·6H₂O were heated in air at 500°C, were then reacted with H₂ gas to form the Sm²⁺ ion. The Al₂O₃−SiO₂2 glasses are appropriate to reduce the Sm³⁺ ion with H₂ gas and show intense photoluminescence of Sm²⁺ ion. Persistent spectra hole burning was observed in the excitation spectrum for the⁷F₀→⁵D₀ transition of the Sm²⁺ ion by the irradiation of DCM dye laser. The hole width and depth were ∼16 cm⁻¹ and ∼10% of the total intensity, respectively, at 20°C.     

The modes of complexation of benzimidazole with aqueous β-cyclodextrin explored by phase solubility, potentiometric titration, 1H-NMR and molecular modeling studies

The results of rigorous modeling of phase solubility diagrams, pH solubility profiles and potentiometric titrations revealed the following for benzimidazole (BZ) and BZ/β-CD complexation in aqueous solution: (a) the pK _a value of BZ estimated at 5.66 ± 0.08 was reduced to 5.33 ± 0.06 in the presence of 15 mM β-CD at 25 °C, thus indicating inclusion complex formation; (b) BZ forms soluble 1:1 and 2:1 BZ/β-CD complexes with complex formation constants K ₁₁ = 104 ± 8 M⁻¹ and K ₂₁ = 16 ± 6 M⁻¹; (c) protonated BZ forms only 1:1 complex with K ₁₁ = 42 ± 12 M⁻¹; (d) ¹H-NMR studies in D₂O showed significant upfield chemical shift displacements for inner cavity β-CD protons indicating inclusion complex formation, while (e) Molecular modeling of BZ-β-CD interactions in water clearly indicated complete inclusion of one BZ molecule into the β-CD cavity.     

Borderline of hydrogen bonding of silanols

Two new silanols bearing very bulky silyl groups, (i-Pr₃ Si)₃SiOH and (t − BuMe₂Si)₃SiOH were prepared by peracidoxidation of their respective silanes. The X − ray crystallographic analysis revealed that (t − BuMe₂Si)₃ SiOH forms a dimeric structure with hydrogen bonding, while (i − Pr₃ Si)₃ SiOH exists as a monomer in the crystal. The effects of the size of the substituents as well as the reactivity of these silanols are discussed.     

Promoting effect of doped cobalt on catalysis of SiO2-supported rhodium for propylene hydroformylation

According to infrared spectroscopy and temperature programmed reduction (TPR), doped Co^o to Rh^o/SiO₂ can play an electron-donating role and prevent the oxidation of Rh^o by surface OH⁻. The interaction between monometallic cobalt and rhodium particles which are probably in close contact results in a strong enhancement of catalytic propylene hydroformylation.     

13C and19F NMR study of α,β-difluorostyryl derivatives of transition metal carbonylates. A method of signal assignment based on the carbon—fluorine spin-spin coupling constants

The¹³C and¹⁹F NMR spectra ofZ- andE-isomers of β-X-substituted α,β-difluorostyrenes (X=F, Cl, CpFe(CO)₂, Re(CO)₅, Re₂(CO)₉Na) were studied. Direct and long-range (across 1–5 bonds) spin-spin coupling constants and the (¹³C−¹²C) isotope shifts in the¹⁹F NMR spectra were determined. The study of the¹³C satellites in the¹⁹F NMR spectra of substituted difluorostyrenes permitted assignment of the¹³C NMR signals of the vinylic carbon atoms. Similarly, the signals in¹⁹F NMR spectra were assigned based on coupling constants of fluorine withipso-carbon. These assignments were found to be in good agreement with the data available from the literature (X=F, Cl). The developed approach was applied to the elucidation of the structure ofZ−PhCF=CClFe(CO)₂Cp. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya. No. 8, pp. 1575–1579, August, 1998.     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

1H NMR Study on Solubilization of Aromatic Solutes in Gemini Cationic Surfactant Micelles

The ¹HNMR spectra of gemini cationic surfactant 1,3‐Propane diaminium N, N‐didodecyl‐2‐hydrxyl‐N,N,N′N′‐tetramethyl‐dichloride (ClC₁₂H₂₅‐(CH₃)₂N‐CH₂CH(OH) CH₂N(CH₃)₂ C₁₂H₂₅ Cl), abbreviated to GC₁₂NCl solutions were determined in the presence of toluene, phenyl ethane, benzyl alcohol, or 2‐phenylethanol. Based on observations, probable solubilization sites of the substrate molecule within the micelles are discussed. The examined results indicate that the polarity of aromatic solutes affects their solubilization site in the micelle solution. The methylene in long chain of GC₁₂NCl shows a single signal in the presence of toluene and phenyl ethane, however, when benzyl alcohol or 2‐phenylethanol is in existence, the peak of ethylenes in long chain Gemini surfactant splits into an upfield signal and a downfield signal in the solubilization system with enhancement of molar ratio of aromatic solutes to the sufactant. The addition of benzyl alcohol and 2‐phenylethanol causes a downfield shift of the methyl signal, the other signal were up field shifted by the addition of the phenyl derivatives. From the dependence of chemical shifts of GC₁₂NCl on solubilizate concentration, it is ascertained that at low solubilizate contents the aromatic solutes are solubilized by adsorption at the micelle‐water interface. With further addition of aromatic solutes, the solubilization site of the solubilizate varied gradually from the mantle of the surfactant micelle to its inner core.     

A Study of Haloperidol Inclusion Complexes with <Emphasis Type="Italic">β</Emphasis>-Cyclodextrin Using Phase Solubility,NMR Spectroscopy and Molecular Modeling Techniques

Guest-host interactions of haloperidol (Halo) with β-cyclodextrin (β-CD) have been investigated using several techniques including phase solubility diagrams (PSD), proton nuclear magnetic resonance (¹H-NMR), X-ray powder diffractometry (XRPD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and molecular mechanical modeling (MM⁺). From an analysis of the PSDs, both protonated and neutral Halo (pK _a=8.5) form soluble 1:1 and 1:2 Halo/β-CD complexes, while the insoluble complex has 1:2 (Halo:β-CD) stoichiometry (B_S-type PSD). Ionization of Halo reduces its tendency to complex with β-CD, where the protonated species at pH=4.6 and 6.0 have K ₁₁ values of 100 L⋅mol⁻¹ and 298 L⋅mol⁻¹, respectively, compared with 2000 L⋅mol⁻¹ for neutral species at pH=10.6. The hydrophobic character of Halo was found to provide 32% of the driving force for complex stability, whereas other factors including specific interactions contribute −15 kJ⋅mol⁻¹. ¹H-NMR and MM⁺ studies indicate the formation of isomeric 1:1 and 1:2 complexes, where the chlorophenyl, flurophenyl, piperidine and butanone moieties become included into separate β-CD cavities. The dominant driving force for complexation is evidently van der Waals with very little electrostatic contribution. PSD, ¹H-NMR, XRPD, DSC and SEM studies indicate the formation of inclusion complexes in solution and in the solid state.     

Astemizole/Cyclodextrin Inclusion Complexes: Phase Solubility, Physicochemical Characterization and Molecular Modeling Studies

Guest–host interaction of astemizole (Astm) with cyclodextrins (CDs) has been investigated using phase solubility diagrams (PSD), differential scanning calorimetry (DSC), X-ray powder diffractometry (XRPD), proton nuclear magnetic resonance (¹H-NMR) and molecular mechanical modeling (MM⁺). Estimates of the complex formation constant, K ₁₁, show that the tendency of Astm to complex with CDs follows the order: β-CD>HP-β-CD>γ-CD, α-CD. 1:1 Astm/β-CD complex formation at pH=5.0 was largely driven by the hydrophobic effect (desolvation), which was quantitatively estimated at −16.5 kJ⋅mol⁻¹, whereas specific interactions contribute only −5.3 kJ⋅mol⁻¹ to 1:1 complex stability (ΔG ₁₁^o=−22.7 kJ⋅mol⁻¹). The percentage contributions of the hydrophobic effect and specific interactions were therefore 73 and 27%, respectively. Both enthalpic and entropic factors contribute equally well (−11 kJ⋅mol⁻¹ each) to 1:1 Astm/β-CD complex stability. ¹H-NMR and MM⁺ molecular modeling studies indicate the formation of different isomeric 1:1 and 1:2 complexes. The dominant driving force for complexation is evidently van der Waals with very little electrostatic contribution. PSD, ¹H-NMR, DSC, XRPD and MM⁺ studies proved the formation of inclusion complexes in solution and the solid state.     

Cisapride/β-cyclodextrin complexation: stability constants, thermodynamics, and guest–host interactions probed by 1H-NMR and molecular modeling studies

Phase solubility techniques were used to obtain the complexation parameters of cisapride (Cisp) with β-cyclodextrin (β-CD) in aqueous 0.05 M citrate buffer solutions. From the UV absorption spectra and the pH solubility profile, two basic pK _as were estimated: pK _a(1+) = 8.7 and pK _a(2+) < 2. The inherent solubility (S _o) of Cisp was found to increase as pH decreases, but is limited by the solubility product of the CispH⁺·citrate¹⁻ salt at low pH (pK _sp = 3.0). Cisp forms soluble 1:1 and 1:2 Cisp/β-CD complexes. A quantitative measure of the hydrophobic effect (desolvation) contribution to 1:1 complex formation was obtained from the linear variation of free energy of 1:1 Cisp/β-CD complex formation (ΔG ₁₁ = −RT ln K ₁₁ < 0) with that of the inherent solubility of Cisp . The results show that the hydrophobic character of Cisp contributes about 35% of the total driving force to 1:1 complex formation (slope = −0.35), while other factors, including specific interactions, contribute −10.6 kJ/mol (intercept). Protonated 1:1 Cisp/β-CD complex formation at pH 6.0 is driven by favorable enthalpy (ΔH° = −9 kJ/mol) and entropy (ΔS° = 51 J/mol K) changes. In contrast, inherent Cisp solubility is impeded by unfavorable enthalpy (ΔH° = 12 kJ/mol) and entropy (ΔS° = 90 J/mol K) changes. ¹H-NMR spectra in D₂O and molecular mechanical studies indicate the formation of inclusion complexes. The dominant driving force for neutral Cisp/β-CD complexation in vacuo was predominantly van der Waals with very little electrostatic contribution.     

Participation of molecular hydrogen-originated protonic acid sites in acid-catalyzed reactions

The formation of protons from molecular hydrogen was observed by IR of adsorbed pyridine for Pt/SO₄ ²⁻−ZrO₂ when heated in the presence of hydrogen. The promotive effects of hydrogen on skeletal isomerization of alkanes and cumene cracking are rationalized by the formation of protons from hydrogen. The formation of protons and the promotive effects of hydrogen were also observed for other catalysts such as Co.Mo/SiO₂−Al₂O₃ and a physical mixture of Pt/SiO₂ and H-ZSM-5. The concept “molecular hydrogen-originated protonic acid site” is proposed as an important and widely applicable concept in acid-catalyzed reactions.     

Halide ion effect on the 1H NMR chemical shifts of the residual protons in commonly employed deuterated solvents with tetra-n-butylammonium chloride – Part 2

Many ¹H NMR spectroscopic studies involving supramolecular binding of tetra-n-butylammonium halides (TBAX) with a variety of molecular receptors have been reported to date. Previously we demonstrated that the reference residual proton signal of the deuterochloroform solvent itself in TBAX solutions shifted downfield in a linear TBAX concentration-dependent relationship. We now report that a similar downfield chemical shift behaviour of the residual protons of other commonly employed deuterated solvents with TBACl can be seen for dichloromethane-d₂ and acetonitrile-d₃, but in acetone-d₆, methanol-d₄ and DMSO-d₆, upfield shifts are observed. A hypothesis based on Density Functional Theory (DFT) modelling is presented to account for this behaviour.     

Reactivity of RuO species in RuO2/CeO2 catalysts prepared by a wet reduction method

The paper deals with the reactivity of RuO₂/CeO₂ prepared by a wet reduction method: ruthenium was supported on Ce(OH)₃, which was precipitated by alkali-hydrolysis of Ce(NO₃)₃, under a reduction condition with formaldehyde at pH 11 and transformed into RuO₂/CeO₂ catalysts by calcination in air at 773 K. The catalysts were investigated with an ESR technique and were tested for oxidation of propylene. They had no ESR signals by themselves at room temperature, but gave two sets of anisotropic signals upon contact with propylene. These signals were derived from the reaction products between RuO and propylene. The intensities of the signals were kept unchanged at room temperature for more than 1 h in the absence of excess propylene. The signals decayed in the presence of excess propylene and the upfield signal decayed more rapidly. A prior heating of the catalyst in air at 473 K or above caused the increase in the intensity of the upfield signal. The time course of the signal changes discriminated between ethylene and olefins with allylic hydrogen toward RuO species.     

Isomerism in OBe3F3 + cation: anab initio study

Ab initio MP2/6-31G^*//HF/6-31G^*+ZPE(HF/6-31G^*) calculations of the potential energy surface in the vicinity of stationary points and the pathways of intramolecular rearrangements between low-lying structures of the OBe₃F₃ ⁺ cation detected in the mass spectra of μ₄-Be₄O(CF₃COO)₆ were carried out. Ten stable isomers with di- and tricoordinate oxygen atoms were localized. The relative energies of six structures lie in the range 0–8 kcal mol⁻¹ and those of the remaining four structures lie in the range 20–40 kcal mol⁻¹. Two most favorable isomers, aC _2v isomer with a dicoordinate oxygen atom, planar six-membered cycle, and one terminal fluorine atom and a pyramidalC _3v isomer with a tricoordinate oxygen atom and three bridging fluorine atoms, are almost degenerate in energy. The barriers to rearrangements with the breaking of one fluorine bridge are no higher than 4 kcal mol⁻¹, except for the pyramidalC _3v isomer (∼16 kcal mol⁻¹). On the contrary, rearrangements with the breaking of the O−Be bond occur with overcoming of a high energy barrier (∼24 kcal mol⁻¹). A planarD _3h isomer with a tricoordinate oxygen atom and linear O−Be−H fragments was found to be the most favorable for the OBe₃H₃ ⁺ cation, a hydride analog of the OBe₃F₃ ⁺ ion; the energies of the remaining five isomers are more than 25 kcal mol⁻¹ higher. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 420–430, March, 1999.     

Physicochemical features of the formation of siliceous porous mesophases

Data on the optimization of alkalinity of the reaction mixture and the reaction temperature in the formation of the siliceous porous mesophase material C₁₆−SiO₂-MMM are presented. A criterion for the evaluation of the level of structure optimization for mesoporous mesophases is formulated. Measurements of the texture parameters of the materials treated in acidic media led to the assumption that the walls in the pure siliceous C₁₆−SiO₂-MMM system consist of separate blocks, which, apparently, are not bound completely to one another by chemical interactions. For Part 2, see Ref. 1. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1685–1691, October, 2000.     

NMR Spectra of Cyclic Nitrones. 7. The Influence of Substituents and a Hydrogen Bond on <Superscript>14</Superscript>N and <Superscript>17</Superscript>O Chemical Shifts in Derivatives of 3-Imidoazoline 3-Oxide

Derivatives of 3-imidazoline 3-oxide have been studied by ¹⁴N and ¹⁷O NMR methods. Regularities of the influence of substituents and of a hydrogen bond on chemical shifts have been made apparent. The range of changes of the chemical shifts of the nitrogen and oxygen nuclei of the nitrone group has been determined. Both in the ¹⁷O and in the ¹⁴N NMR spectra the signals of the amino derivatives are the highest field signals for the nitrone group, and the lowest field signals are the signals of the cyano derivatives in the series of derivatives investigated. Depending on the substituent (from amino to cyano group) the ¹⁷O chemical shifts varied over a range ∼155 ppm, but the interval of change of the ¹⁴N chemical shifts for the same substituents was ∼110 ppm. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1336–1341. September, 2005.