An Investigation into Domino‐Heck Reactions of N‐Acylamino‐Substituted Tricyclic Imides: Synthesis of New Prospective Pharmaceuticals

Heck and domino‐Heck reactions of unsaturated N‐acylamino‐substituted tricyclic imides with aryl(heteroaryl) iodides and phenyl‐ or (trimethylsilyl)acetylene were either carried out in the presence of formate or phenyl‐ and (trimethylsilyl)acetylene, respectively. The C? C coupling reactions appeared to be completely diastereoselective, giving the corresponding N‐acylamino‐5‐exo‐aryl (heteroaryl)‐ ( 5a – c, 6a , b ), N‐(benzoylamino)‐5‐exo‐phenyl‐6‐exo‐[(trimethylsilyl)ethynyl]‐ ( 5d ), or 5‐exo‐(4‐chlorophenyl)‐N‐(2,2‐dimethylpropanoylamino)‐6‐exo‐(phenylethynyl)bicyclo[2.2.1]heptane‐2‐endo,3‐endo‐dicarboximide ( 6c ) (Schemes 3 and 4).     

Cycloaromatization Reaction of 4‐Alkoxy‐1,1,1‐trifluoroalk‐3‐en‐2‐ones with 2,6‐Diaminotoluene: The Unexpected Regioselective Synthesis of 2,4,7,8‐Tetrasubstituted Quinolines

This article reports a convenient and general method for the regioselective synthesis of a new series of 2‐alkyl(aryl)‐8‐methyl‐4‐trifluoromethyl‐7‐aminoquinolines in 86–93% yields, from cycloaromatization reactions of N‐(oxotrifluoroalkenyl)‐2,6‐diaminotoluenes in a strongly acidic medium polyphosphoric acid and absence of solvent. The enaminoketone intermediates were easily isolated from the reaction of 4‐alkoxy‐4‐alkyl(aryl)‐1,1,1‐trifluoroalk‐3‐en‐2‐ones [CF₃C(O)CH═C(R)OR¹, where R = H, Me, Ph, 4‐FPh, 4‐BrPh, 4‐MePh, and R¹ = Me, Et] with 2,6‐diaminotoluene (2,6‐DAT) in methanol under mild conditions, in 46–70% yields. Another synthetic route also allowed the regioselective synthesis of 2‐aryl(heteroaryl)‐4‐methyl‐4‐trifluoromethyl‐7‐aminoquinolines from direct cyclocondensation reactions of 4‐alkoxy‐4‐aryl(heteroaryl)‐1,1,1‐trifluoroalk‐3‐en‐2‐ones with 2,6‐diaminotoluene in methanol under mild conditions, in 21–36% yields.     

An Efficient Synthesis of N‐Substituted‐3‐aryl‐3‐(2‐hydroxy‐4,4‐dimethyl‐6‐oxocyclohex‐1‐enyl)propanamides by Four‐component Reaction in Aqueous Medium

A mild and efficient synthesis of N‐substituted‐3‐aryl‐3‐(2‐hydroxy‐4,4‐dimethyl‐6‐oxocyclohex‐1‐enyl)propanamides via four‐component reaction of an aldehyde, amine, Meldrum's acid and 5,5‐dimethylcyclo‐hexane‐1,3‐dione in the presence of benzyltriethylammonium chloride (TEBAC) in aqueous medium is described. This method has the advantages of accessible starting materials, good yields, mild reaction conditions and eco‐friendliness.     

An Efficient Synthesis of N‐Substituted‐3‐aryl‐3‐(4‐hydroxy‐6‐methyl‐2‐oxo‐2H‐pyran‐3‐yl)propanamides by Four‐Component Reaction in Aqueous Medium

A mild and efficient synthesis of N‐substituted‐3‐aryl‐3‐(4‐hydroxy‐6‐methyl‐2‐oxo‐2H‐pyran‐3‐yl)propanamides via four‐component reaction of an aldehyde, amine, Meldrum's acid, and 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one in the presence of benzyltriethylammonium chloride (TEBAC) in aqueous medium is described. This method has the advantages of accessible starting materials, good yields, mild reaction conditions, and begin environmentally friendly.     

Synthesis of N‐(Substituted aryl/cyclohexyl)‐N'‐[5‐bromo‐5‐nitro‐2‐oxido‐1,3,2‐dioxaphosphorinane‐2‐yl]ureas

N‐(Substituted aryl/cyclohexyl)‐N'‐[5‐bromo‐5‐nitro‐2‐oxido‐1,3,2‐dioxaphosphorinane‐2‐yl]ureas RR'P(O)NHC(O)NHR' (5) were synthesized by the reactions of 2‐bromo‐2‐nitro‐1,3‐propanediol (4) with chlorides of aryl/cyclohexyl carbamidophosphoric acids (3) in the presence of triethylamine at room temperature. Their ir, ¹H, ¹³C and ³¹P nmr spectral data are discussed.     

An Efficient N‐Arylation of Heterocycles with Aryl‐, Heteroaryl‐, and Vinylboronic Acids Catalyzed by Copper Fluorapatite

N‐Arylation of N‐containing heterocycles, such as pyrazoles, imidazoles, and benzimidazoles with aryl‐, heteroaryl‐, and vinylboronic acids was efficiently carried out by copper fluorapatite (CuFAP) catalyst in MeOH at room temperature under base‐free conditions. The N‐arylated heterocycles were isolated in good‐to‐excellent yields.     

A New Route to N‐Aryl 2‐Alkenamides,N‐Allyl N‐Aryl 2‐Alkenamides,and N‐Aryl α,β‐Unsaturated γ‐Lactams from N‐Aryl 3‐(Phenylsulfonyl)propanamides

A series of N‐aryl 2‐alkenamides were produced efficiently by treating N‐aryl 3‐(phenylsulfonyl)‐propanamides with potassium tert‐butoxide in THF at 0°C. With out isolation, it was further treated with an additional equivalent of potassium tert‐butoxide and allyl bromide to give N‐allyl N‐aryl 2‐alkenamides in one pot in good yields. Followed by a ring‐closing metathesis reaction, these N‐allyl N‐aryl 2‐alkenamides were respectively converted into corresponding N‐aryl α,β‐unsaturated γ‐lactams in moderate yields.     

Easily Accessible Benzamide‐Derived P,O Ligands (Bphos) for Palladium‐Catalyzed Carbon–Nitrogen Bond‐Forming Reactions

Easily accessible benzamide‐derived hemilabile phosphine ligands were efficiently prepared through ortho‐directed lithiation of the corresponding N,N‐diethylbenzamide followed by quenching with chlorodialkylphosphines. These structurally simple hemilabile ligands were found to be highly effective in palladium‐catalyzed amination of aryl and heteroaryl chlorides. Various sterically congested and functionalized aryl halide substrates were compatible in these reaction conditions. By using optimized reaction conditions, remarkable catalyst productivity (total turnover number up to 8400) was obtained.     

N‐arylhexahydropyrimidines. Part 1. Synthesis and 1H NMR characterization of 1,3‐Di and 1,2,3‐trisubstituted derivatives

A series of N‐arylhexahydropyrimidines la‐1 were synthesized by condensation of N‐aryl‐N'‐alkyl‐ (or aryl)‐1,3‐propanediamines 2a‐h with aldehydes. Reactions with formaldehyde proceeded in hydroalcoholic solution, while condensation with aromatic aldehydes required in general the use of activated molecular sieves. ¹H NMR spectra of compounds la‐1 were analyzed and the results correlated with their conforma‐tional features. Derivatives devoid of a 2‐substituent la‐g show fast ring reversal and N‐inversion. The presence of a 2‐aryl group shifts the ring reversal equilibrium towards conformations where the 2‐aryl substituent is equatorial. Differential assignment of axial and equatorial hydrogens in these compounds was made on the basis of coupling constants and chemical shift values. In compound 1k spectral data suggest the axial orientation of the N‐methyl group. Such findings were confirmed in the corresponding NOESY spectrum.     

Domino‐Heck Reactions of Carba‐ and Oxabicyclic,Unsaturated Dicarboximides: Synthesis of Aryl‐Substituted,Bridged Perhydroisoindole Derivatives

The C? C coupling of the two bicyclic, unsaturated dicarboximides 5 and 6 with aryl and heteroaryl halides gave, under reductive Heck conditions, the C‐aryl‐N‐phenyl‐substituted oxabicyclic imides 7a – c and 8a – c (Scheme 3). Domino‐Heck C? C coupling reactions of 5, 6 , and 1b with aryl or heteroaryl iodides and phenyl‐ or (trimethylsilyl)acetylene also proved feasible giving 8, 9 , and 10a – c , respectively (Scheme 4). Reduction of 1b with LiAlH₄ (→ 11 ) followed by Heck arylation and reduction of 5 with NaBH₄ (→ 13 ) followed by Heck arylation open a new access to the bridged perhydroisoindole derivatives 12a , b and 14a , b with prospective pharmaceutical activity (Schemes 5 and 6).     

Practical Iron‐ and Cobalt‐Catalyzed Cross‐Coupling Reactions between N‐Heterocyclic Halides and Aryl or Heteroaryl Magnesium Reagents

The reaction scope of iron‐ and cobalt‐catalyzed cross‐coupling reactions in the presence of isoquinoline (quinoline) in the solvent mixture tBuOMe/THF has been further investigated. Various 2‐halogenated pyridine, pyrimidine, and triazine derivatives were arylated under these mild conditions in excellent yields. The presence of isoquinoline allows us to perform Fe‐catalyzed cross‐coupling reactions between 6‐chloroquinoline and aryl magnesium reagents. Furthermore, it was found that the use of 10 % N,N‐dimethylquinoline‐8‐amine increases the yields of some Co‐catalyzed cross‐coupling reactions with chloropyridines bearing electron‐withdrawing substituents.     

Scope and Limitations of the Base‐Free Copper(I) Oxide Catalyzed N‐Heteroarylation of 1H‐(Benz)imidazoles with B‐Heteroarylboronic Acids or 2‐Heteroaryl‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolanes

The known, very efficient base‐free copper(I) oxide catalyzed N‐arylation reaction performed in MeOH at room temperature for the synthesis of N‐substituted azoles and amines was extended to the heterocyclic series, i.e., we report herein the base‐free copper(I) oxide catalyzed N‐heteroarylation of 1H‐(benz)imidazole, by means of electron‐rich or electron‐deficient B‐heteroarylboronic acids or 2‐heteroaryl‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolanes (Schemes 1 and 2). Under these conditions, N‐heteroarylated 1H‐(benz)imidazoles were obtained in good to excellent yields (Tables 1 and 2). This is the first time that 2‐heteroaryl‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolanes were used in this type of reaction.     

Palladium‐catalyzed Suzuki–Miyaura coupling with aryl and heteroaryl bromides using N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine

An easily prepared tetraphosphine N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine (1) combined with PdCl₂ affords an efficient catalytic system for Suzuki cross‐coupling of aryl and heteroaryl bromides. A high turnover number of 750 000 is obtained with the catalyst loading as low as 1 ppm. This catalyst system exhibits good stability and longevity. In this study, a broad scope of substrates is investigated and satisfactory yields are obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

New Pyrazolyl‐Nicotinic Acids,Methyl Esters,and 1,3,4‐Oxadiazolyl‐pyrazolyl‐pyridine Tricyclic Scaffold Derivatives from 6‐Hydrazinylnicotinic Acid Hydrazide Hydrate

This paper describes an efficient approach for the synthesis of a new series of 6‐[3‐alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl]nicotinic acids (where alkyl = CH₃; aryl = Ph, 4‐OCH₃Ph, 4,4′‐BiPh; and heteroaryl = 2‐Furyl) from the hydrolysis reaction of alkyl(aryl/heteroaryl)substituted 2‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐pyrazol‐1‐yl)‐5‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐1‐carbonylpyrazol‐1‐yl)pyridines, under basic conditions and at 70–95% yields. In a subsequent step, the esterification reaction of pyrazolyl‐nicotinic acids done in thionyl chloride and methanol led to the isolation of a series of methyl 6‐[alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl] nicotinates as stable hydrochloride salts at 64–84% yields, which could be easily converted to hydrazides to give new oxadiazolyl‐pyrazolyl‐pyridine tricyclic scaffolds at good yields from a [4 + 1] cyclocondensation reaction with 1,1,1‐triethoxyethane and 1‐(triethoxymethyl)benzene as the reagent/solvent.     

Cobalt‐Catalyzed Electrophilic Amination of Aryl‐ and Heteroarylzinc Pivalates with N‐Hydroxylamine Benzoates

Aryl‐ and heteroarylzinc pivalates can be aminated with O‐benzoylhydroxylamines at 25 °C within 2–4 h in the presence of 2.5–5.0 % CoCl₂?2 LiCl to furnish the corresponding tertiary arylated or heteroarylated amines in good yields. This electrophilic amination also provides access to diarylamines and aryl(heteroaryl)amines. A new tuberculosis drug candidate (Q203) was prepared in six steps and 56 % overall yield by using this cobalt‐catalyzed amination as the key step.     

Synthesis of Nonsymmetrically N,N′‐Diaryl‐Substituted 4,4′‐Bipyridinium Salts with Redox‐Tunable and Titanium Dioxide (TiO2)‐Anchoring Properties

A general method for the synthesis of so far unknown nonsymmetrically substituted N‐aryl‐N′‐aryl′‐4,4′‐bipyridinium salts is presented (Scheme 1). The common intermediate in all procedures is N‐(2,4‐dinitrophenyl)‐4,4′‐bipyridinium hexafluorophosphate ( 1 ⋅ ). For the synthesis of nonsymmetric arylviologens, 1 ⋅ was arenamine‐exchanged by the Zincke reaction, and then activated at the second bipyridine N‐atom with 2,4‐dinitrophenyl 4‐methylbenzenesulfonate. The detailed preparation of the six N‐aryl‐N′‐aryl′‐viologens 21 – 26 is discussed (Scheme 2). The generality of the procedure is further exemplified by the synthesis of two nonsymmetrically substituted N‐aryl‐N′‐benzyl‐ (see 11 and 12 ), and seven N‐aryl‐N′‐alkyl‐4,4′‐bipyridinium salts (see 28 – 34 ) including substituents with metal oxide anchoring and redox tuning properties. The need for these compounds and their usage as electrochromic materials, in dendrimer synthesis, in molecular electronics, and in tunable‐redox mediators is briefly discussed. The latter adjustable property is demonstrated by the reduction potential measured by cyclic voltammetry on selected compounds (Table).     

A One‐pot,Four‐component Protocol for the Synthesis of 2‐Aroylimino‐3‐aryl‐4‐methyl‐5‐acetyl‐1,3‐thiazolines

A concise and efficient route for the synthesis of new 2‐aroylimino‐3‐aryl‐4‐methyl‐5‐acetyl‐1,3‐thiazolines in good to excellent yields is described. This involves the one‐pot, four‐component reaction of suitable aroyl chlorides, potassium thiocyanate, anilines, and 3‐chloropentane‐2,4‐dione in the presence of N‐methylimidazole.     

Practical Enantioselective Arylation and Heteroarylation of Aldehydes with In Situ Prepared Organotitanium Reagents Catalyzed by 3‐Aryl‐H8‐BINOL‐Derived Titanium Complexes

A highly efficient and practical method for the catalytic enantioselective arylation and heteroarylation of aldehydes with organotitanium reagents, prepared in situ by the reaction of aryl‐ and heteroaryllithium reagents with ClTi(OiPr)₃, is described. Titanium complexes derived from DPP‐H₈‐BINOL ( 3 d ; DPP=3,5‐diphenylphenyl) and DTBP‐H₈‐BINOL ( 3 e ; DTBP=3,5‐di‐tert‐butylphenyl) exhibit excellent catalytic activity in terms of enantioselectivity and turnover efficiency for the transformation, providing diaryl‐, aryl heteroaryl‐, and diheteroarylmethanol derivatives in high enantioselectivity at low catalyst loading (0.2–2 mol %). The reaction begins with a variety of aryl and heteroaryl bromides through their conversion into organolithium intermediates by Br/Li exchange with nBuLi, thus providing straightforward access to a range of enantioenriched alcohols from commercially available starting materials. Various 2‐thienylmethanols can be synthesized enantioselectively by using commercially available 2‐thienyllithium in THF. The reaction can be carried out on a 10 mmol scale at 0.5 mol % catalyst loading, demonstrating its preparative utility.     

The Synthesis of Some New (S)‐1‐Aryl‐N‐(1‐hydroxy‐3‐phenylpropan‐2‐yl)‐5‐methyl‐1H‐1,2,3‐triazole‐4‐carboxamide

Some new (S)‐1‐aryl‐N‐(1‐hydroxy‐3‐phenylpropan‐2‐yl)‐5‐methyl‐1 H‐1,2,3‐triazole‐4‐carboxamides 4a , 4b , 4c , 4d , 4e , 4f , 4g , 4h , 4i , 4j have been synthesized and established by ¹H and ¹³C NMR, IR, MS spectra, CHN analyses, and x‐ray diffraction crystallography. The molecular conformation and packing is stabilized by interactions of intermolecular H‐bond O2’‐H2'···O1, O2‐H2···O1’ and intramolecular H‐bond N4’‐H4'N···N3’, N4’‐H4'N···O2’, N4‐H4N···N3, N4‐H4N···O2. The two rings of five numbers were formed by H‐bond in a molecular.     

Influence of Catalyst Structure and Reaction Conditions on anti‐ versus syn‐Aminopalladation Pathways in Pd‐Catalyzed Alkene Carboamination Reactions of N‐Allylsulfamides

The Pd‐catalyzed coupling of N‐allylsulfamides with aryl and alkenyl triflates to afford cyclic sulfamide products is described. In contrast to other known Pd‐catalyzed alkene carboamination reactions, these transformations may be selectively induced to occur by way of either anti‐ or syn‐aminopalladation mechanistic pathways by modifying the catalyst structure and reaction conditions.