Surface‐imprinted microspheres prepared by a template‐oriented method for the chiral separation of amlodipine

The surface imprinting technique has been developed to overcome the mass‐transfer difficulty, but the utilization ratio of template molecules in the imprinting procedure still remains a challengeable task to be improved. In this work, specifically designed surface‐imprinted microspheres were prepared by a template‐oriented method for enantioseparation of amlodipine besylate. Submicron mesoporous silica microspheres were surface‐modified with double bonds, followed by polymerizing methacrylic acid to generate carboxyl modified mesoporous silica microspheres (PMAA@SiO₂). Afterwards, PMAA@SiO₂ was densely adsorbed with (S )‐amlodipine molecules to immobilize template molecules through multiple hydrogen bonding interactions. Then surface molecular imprinting was carried out by cross‐linking the carboxyl group of PMAA@SiO₂ with ethylene glycol diglycidyl ether. The surface‐imprinted microspheres showed fast binding kinetics of only 20 min for equilibrium adsorption, and the saturation adsorption capacity reached 137 mg/g. The imprinted materials displayed appreciable chiral separation ability when used as column chromatography for enantioseparation of amlodipine from amlodipine besylate, and the enantiomeric excess of (S )‐amlodipine reached 13.8% with only 2.3 cm column length by no extra chiral additives. Besides, the imprinted materials exhibited excellent reusability, and this allows the potential application for amplification production of amlodipine enantiomer.     

Separation of chiral compounds using magnetic molecularly imprinted polymer nanoparticles as stationary phase by microchip capillary electrochromatography

In this work, a simple and rapid approach was developed for separation and detection of chiral compounds based on a magnetic molecularly imprinted polymer modified poly(dimethylsiloxane) (PDMS) microchip coupled with electrochemical detection. Molecularly imprinted polymers were prepared employing Fe₃O₄ nanoparticles (NPs) as the supporting substrate and norepinephrine as the functional monomer in the presence of template molecule in a weak alkaline solution. After extracting the embedded template molecules, Fe₃O₄@polynorepinephrine NPs (MIP–Fe₃O₄@PNE NPs) showed specific molecular recognition selectivity and high affinity towards the template molecule, which were then used as stationary phase of microchip capillary electrochromatography for chiral compounds separation. Mandelic acid and histidine enantiomers were used as model compounds to test the chiral stationary phase. By using R‐mandelic acid as the template molecule, mandelic acid enantiomer was effectively separated and detected on the MIP‐Fe₃O₄@PNE NPs modified PDMS microchip. Moreover, the successful separation of histidine enantiomers on the MIP–Fe₃O₄@PNE NPs modified microchip using L‐histidine as template molecule was also achieved.     

以混旋邻氯扁桃酸为模板的分子印迹聚合物的制备及拆分性能研究

以混旋邻氯扁桃酸为模板分子和合成的(S)-(1-萘乙基)-丙烯酰胺为手性功能 单体制备分子印迹聚合物作为色谱固定相，对混旋邻氯扁桃酸有较好的拆分能力， 分离因子α达到1.36。但对模板分子的类似物混旋扁桃酸和对氯扁桃酸没有拆分能 力。用Hyperchem软件模拟了(S)-邻氯扁桃酸与(S)-(1-萘乙基)-丙烯酰胺形成的复 合物的结构模型，其在聚合物母体中留下的具有立体构型和作用力双重识别的S-S 型空穴，对(S)-邻氯扁桃酸有较强的保留作用，从而达到对混旋物拆分的目的。     

Preparation and characterization of molecularly‐imprinted polymers for extraction of sanshool acid amide compounds followed by their separation from pepper oil resin derived from Chinese prickly ash (Zanthoxylum bungeanum)

Molecularly imprinted polymers were prepared using the molecular structure analogs of sanshool as template molecule, 2‐vinylpyridine and β‐cyclodextrin as double functional monomers, ethylene dimethacrylate as cross linker, and azobisisobutyronitrile as initiator. The structural characteristics of the polymers were determined by Fourier‐transform infrared spectroscopy and scanning electron microscopy. Dynamic adsorption and isothermal adsorption were also investigated. The molecularly imprinted polymers were used to prepare a molecularly imprinted solid‐phase extraction column in order to separate acid amide components from pepper oil resin derived from Chinese prickly ash (Zanthoxylum bungeanum). After eluting, the percentage of acid amide components was enhanced to 92.40 ± 1.41% compared with 23.34 ± 1.21% in the initial pepper oil resin, indicating good properties of purification of molecularly imprinted polymers and potential industrial application.     

2D Ising Model for Adsorption-induced Enantiopurification of Racemates

Mechanisms for the spontaneous transformation of achiral chemical systems into states of enantiomeric purity have important ramifications in modern pharmacology and potential relevance to the origins of homochirality in life on Earth. Such mechanisms for enantiopurification are needed for production of chiral pharmaceuticals and other bioactive compounds. Previously proposed chemical mechanisms leading from achiral systems to near homochirality are initiated by a symmetry-breaking step resulting in a minor excess of one enantiomer via statistical fluctuations in enantiomer concentrations. Subsequent irreversible processes then amplify the majority enantiomer concentration while simultaneously suppressing minority enantiomer production. Herein, equilibrium adsorption of amino acid enantiomer mixtures onto chiral and achiral surfaces reveals amplification of surface enantiomeric excess relative to the gas phase; i. e. enantiopurification of chiral adsorbates by adsorption. This adsorption-induced amplification of enantiomeric excess is shown to be well-describe by the 2D Ising model. More importantly, the 2D-Ising model predicts formation of homochiral monolayers from adsorption of racemic mixtures or prochiral molecules on achiral surfaces; i. e. enantiopurification with no apparent chiral driving force.     

Synthesis of a nano‐sized chiral imprinted polymer and its use as an (S)‐atenolol carrier in the bulk liquid membrane

In this work, nanosized chiral imprinted polymers containing (S)‐atenolol ((S)‐ATN) selective sites were synthesized by using suspension polymerization in silicon oil. (S)‐ATN, methacrylic acid, and ethylene glycol dimethacrylate were used as enantiomerically pure template, functional monomer, and cross‐linker, respectively. The prepared chiral imprinted polymers were used as the carrier elements in a bulk liquid membrane (BLM). (S)‐ATN transport capability of the chiral imprinted polymers was compared with that of the nonimprinted polymer. It was shown that chiral imprinted polymers could transport (S)‐ATN through the BLM more effectively than (R)‐ATN, whereas no difference in the facilitated transport was observed between (R)‐ATN and (S)‐ATN when using nonimprinted polymer particles as the carrier element in the BLM. A kinetic model was proposed for the transportation of (S)‐ATN through the chiral imprinted polymers based BLM. It was found that the extraction of ATN from the source to the membrane controls the chiral separation process. It was also found that the pH of source and receiving phases as well as the racemic ATN concentration in source phase had very crucial effect on the chiral separation efficiency.     

Preparation and application of magnetic molecularly imprinted polymers for the isolation of chelerythrine from Macleaya cordata

A novel type of magnetic molecularly imprinted polymer was prepared for the selective enrichment and isolation of chelerythrine from Macleaya cordata (Willd) R. Br. The magnetic molecularly imprinted polymers were prepared using functional Fe₃O₄@SiO₂ as a magnetic support, chelerythrine as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross‐linker. Density functional theory at the B3LYP/6‐31G (d, p) level with Gaussian 09 software was applied to calculate the interaction energies of chelerythrine, methacrylic acid and the complexes formed from chelerythrine and methacrylic acid in different ratios. The structural features and morphology of the synthesized polymers were characterized by using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, and vibration sample magnetometry. Adsorption experiments revealed that the magnetic molecularly imprinted polymers possessed rapid kinetics, high selectivity, and a higher binding capacity (7.96 mg/g) to chelerythrine than magnetic molecularly non‐imprinted polymers (2.36 mg/g). The adsorption process was in good agreement with the Langmuir adsorption isotherm and pseudo‐second‐order kinetics models. Furthermore, the magnetic molecularly imprinted polymers were successfully employed as adsorbents for the extraction and enrichment of chelerythrine from Macleaya cordata (Willd) R. Br. The results indicated that the magnetic molecularly imprinted polymers were suitable for the selective adsorption of chelerythrine from complex samples such as natural medical plants.     

Enantiorecognition on solid chiral selectors using microbatch technology: an example of limitation in case of strong association in the racemate

When they were independently tested, the enantiomers of N,N'-bis(salicylidene)-trans-1,2-cyclohexanediamine showed a large difference in adsorption on new chiral selectors using microbatch technology. Surprisingly, when these enantiomers were applied on the same supports as a racemic mixture, no discrimination was observed even though suitable adsorption existed. When a mixture enriched in one enantiomer (scalemic mixture) was applied, the resulting supernatant contained the racemic form and the enantiomer in excess was adsorbed on the support together with a part of racemate. This behavior, which militates in favor of a strong heterochiral dimer formation in the racemate, was revealed using microbatch technology but remained hidden on classical column chromatography on chiral support. Molecular dynamics calculations corroborate this hypothesis, showing a favorite binding mode of the heterochiral dimer, which is stabilized by various inter- and intramolecular interactions. Our findings may be considered as a new limitation of microbatch technology, but they may have some inference in case of chiral amplification using the N,N'-bis(salicylidene)-trans-1,2-cyclohexanediamine enantiomers as chiral ligands.     

Chiral pair monolayer adsorption of iodine-substituted octadecanol molecules on graphite

High-resolution scanning tunneling microscopy has been used to examine the adsorbate structures formed when a racemic mixture of (9R,10R)-9,10-diiodooctadecan-1-ol and (9S,10S)-9,10-diiodooctadecan-1-ol is adsorbed at the basal plane of highly ordered pyrolytic graphite. The herringbone structure characteristic of the adsorption of long-chain molecules on graphite is observed. Close examination of the micrographs indicates a unique structure in which the chiral molecules adsorb in pairs, with one enantiomer filling half of the unit cell, and the other enantiomer filling the other half. Instead of forming separate chiral domains, as is sometimes observed when a racemic mixture adsorbs on an achiral surface, chiral pairs are formed and the pairs form an ordered monolayer, exposing opposite faces of the same molecule. An achiral racemic mixture is observed to form a chiral structure on an achiral surface in the regions of the surface examined here.     

Carbenoid Pathways in Copper‐Catalyzed Intramolecular Cyclopropanations of Phenyliodonium Ylides

The enantioselectivity of the copper‐catalyzed intramolecular cyclopropanation of allyl diazomalonates and the corresponding phenyliodonium ylides was investigated with a series of chiral, non‐racemic ligands. The reaction of 6b in the presence of the bis[dihydrooxazole] ligand Xa in refluxing 1,2‐dichloroethane proceeded to 8b with an enantiomer excess (ee) of up to 72% under optimized conditions. In contrast, 8b resulting from reaction of ylide 7b with the same ligand, but in CH₂Cl₂ at 0°, had an ee of only 30%. With other ligands, diazomalonate 6b reacted with a lower enantioselectivity than ylide 7b , however. The intramolecular cyclopropanation of the acetoacetate‐derived phenyliodonium ylide 15b afforded 16b with 68% ee with ligand Xa , but the corresponding diazo compound was unreactive when exposed to chiral copper catalysts. The observation of asymmetric induction in the Cu‐catalyzed reactions of the ylides 7 and 15 is consistent with a carbenoid mechanism; however, the discrepancy of the enantioselectivities observed between diazomalonate 6b and ylide 7b suggests a competing unselective pathway for cyclopropanation outside of the coordination sphere of copper.     

Chiral Recognition Sites Converted from Tetrapeptide Derivatives Adopting Racemates as Print Molecules

Molecularly imprinted polymeric membranes were prepared from polystyrene resin bearing tetrapeptide derivatives H‐Asp(OcHex)‐Leu‐Asp(OcHex)‐Glu(OBzl)‐OCH₂‐ (DLDE) consisting of D ‐amino acid residues or L ‐amino acid residues. The tetrapeptide derivatives were converted into chiral recognition sites by using not only an optically pure Boc‐Trp but also racemic Boc‐Trps as a print molecule. The chiral recognition ability depends on the combination of the absolute configuration of the print molecule and that of constituting amino acid residues. The membrane prepared from a DLDE derivative consisting of D ‐amino acid residues and imprinted by Boc‐D ‐Trp recognized the D ‐isomer in preference to the corresponding L ‐isomer and vice versa. In the present study, it was also made clear that racemic print molecules were effective in generating chiral recognition sites. The affinity constant of the generated chiral recognition site was determined to be 9.6 × 10³ mol^?1 · dm³, which was independent of the molecular imprinting conditions. Enantioselective permeation was attained by applying electrodialysis. An optimum permselectivity of 5.9, which corresponds to the adsorption selectivity, was attained.

Summary of the molecularly imprinted polymeric membranes studied.     

Chiral separation of enantiomeric 1,2-diamines using molecular imprinting method and selectivity enhancement by addition of achiral primary amines into eluents.

The imprinted polymers based on a transient complex formation between methacrylic acid and template molecules were prepared by using methacrylic acid and ethylene dimethacrylate as a cross-linking agent. The template molecules used were (R,R)-cyclohexanediamine (1), (S,S)-1,2-diphenylethylenediamine (2) and (S)-1,1'-binaphthyl-2,2'-diamine (3). Another group of templates were those in which the amino group of these templates had been substituted by the hydroxy group: (R,R)-1,2-cyclohexanediol (4) and (S,S)-hydrobenzoin (5). Racemic 2 was separated by the polymer prepared with template 2 (P2) and that with template 1 (P1). Template 2 is larger than template 1 in steric bulkiness, but P1 was effective for the enantiomer separation of racemic 2. P1 was not effective for the separation of racemic 4. Enantioselectivity observed in racemic 2 in P2 was higher than that in racemic 1 in P1. P2 has no definite predetermined shape for solute 1, but it was capable of separating racemic 1. This separation should be thus ascribed to the orientation of at least two carbonyl groups reflecting the conformation of template 2 in P2 cavity. Racemic 5, having the same configuration of the two bulky phenyl groups as that of solute 2, was separated in P2. When the primary amines such as propylamine, cyclohexylamine and 1-adamantanamine were added into the acetic acid-methanol mixtures as eluents, both enantioselectivity and retentivity for racemic 2 were enhanced along with the remarkable peak tailing.     

A practical enantioselective fluorescent sensor for mandelic acid

A novel optically active bisbinaphthyl fluorescent sensor, (S,S)- or (R,R)-1, is designed for the recognition of chiral alpha-hydroxycarboxylic acids. A convenient method has been developed to synthesize this compound. It is observed that (S)-mandelic acid enhances the fluorescence intensity of the (S,S)-sensor significantly more than (R)-mandelic acid does. The enantioselective fluorescent response is confirmed with the observation of a mirror image relationship for the interaction of (S,S)- and (R,R)-sensors with mandelic acid. The enantioselectivity in fluorescence response [(I(S) - I(0))/(I(R) - I(0)) = 2.49] is quite high, which makes the sensor useful for practical application. The fluorescence intensity change of the sensor is found to be linearly related to the enantiomeric composition of mandelic acid. This sensor is potentially useful for the combinatorial search of chiral catalysts for the asymmetric synthesis of alpha-hydroxycarboxylic acids.     

Chiral electrochemical recognition by very thin molecularly imprinted sol-gel films

Thin films with enantioselective properties for electrochemically active chiral probes were developed. Enantioselectivity was accomplished via molecular imprinting. The films were fabricated through the sol-gel technique and were spin-coated on ITO electrodes. The chiral selectivity recognition was detected using two enantiomer pairs: D- and L-3,4-dihydroxyphenylalanine (D- and L-dopa) and (R)- and (S)-N,N'-dimethylferrocenylethylamine [(R)-Fc and (S)-Fc]. A defined chiral cavity was obtained by selection of functional monomers that interact with the template molecule, followed by its removal. Chiral selection properties were measured by cyclic voltammetry and square wave voltammetry. For both template molecules, very good chiral recognition was revealed by electrochemical measurement. The nonspecific adsorption measured for reference nonimprinted films was negligible (less than 5%). Dopa imprinted films revealed both high sensitivity, by the detection of 1 nM (0.2 ppb) concentration, and excellent selectivity, when challenged with a series of catechol derivatives. Fc-imprinted films were able to detect ca. 2 ppm of the target molecule, with very good enantioselectivity and low nonspecific adsorption. To our knowledge, this is the first report of successful molecular imprinting of a ferrocene derivative.     

Thermo‐sensitive surface molecularly imprinted magnetic microspheres based on bio‐macromolecules and their specific recognition of bovine serum albumin

Bovine serum albumin imprinted magnetic microspheres, with functional monomers of modified chitosan, N‐isopropylacrylamide and sulfobetaine methacrylate, were successfully prepared and characterized in detail. Computational analyses showed that during the preparation process, modified chitosan can effortlessly form multiple non‐covalent bonds with protein molecules. Temperature‐sensitive N‐isopropylacrylamide improves the elution efficiency by abating the mass transfer resistance. Meanwhile, the zwitterionic sulfobetaine methacrylate strongly interacts with H₂O molecules, remarkably reducing the non‐specific adsorption. The specific bovine serum albumin adsorption performances of the prepared imprinted material were then determined. The adsorption amount reached 86.87 mg/g and the imprinting factor was 6.49. These excellent specific adsorption properties are attributed to the synergetic effects of the different monomers. The fabricated imprinted material not only exhibits great prospects as a biosensor or separation material for protein molecules, but also provides a collaborative strategy for preparing multi‐functional imprinted materials.     

Structure–property relationship study of the HPLC enantioselective retention of neuroprotective 7‐[(1‐alkylpiperidin‐3‐yl)methoxy]coumarin derivatives on an amylose‐based chiral stationary phase

The enantiomer separation of a number of racemic 7‐[(1‐alkylpiperidin‐3‐yl)methoxy]coumarin derivatives, some of which show outstanding in vitro multitarget neuroprotective activities, was successfully achieved on a polysaccharide‐based chiral stationary phase, bearing amylose tris(3,5‐dimethylphenylcarbamate) as a chiral selector, in normal polar mode (methanol and acetonitrile as the mobile phases). The majority of the screened selectands, especially those bearing 1‐(3‐X‐benzyl)piperidin‐3‐yl moieties, showed baseline enantiomer separations, and compound 8 (X = NO₂) was the best resolved (α = 2.01; R_S = 4.27). Linear free energy relationships, usefully complemented by molecular docking calculations, have the key role in enantioselective retention of aromatic interactions between π‐donor moieties in the chiral selector and π‐acceptor moieties in selectand, strengthened by hydrogen bond interaction between a hydrogen bond donor in the chiral selector and the hydrogen bond acceptor group(s) in the selectand. Statistically, reliable equations highlighted the importance of the substituent's size and substitution pattern (meta better than para) to affect the enantiorecognition of the title compounds. The chromatographic data support the scalability of the optimized experimental conditions for preparative purposes.     

Racemic ofloxacin separation by supported-liquid membrane extraction with two organic phases

As the relation of chirality and activities of drugs is researched deeply, people become to re-alize the clinic importance of chirality. The different enantiomers of a drug can have vastly differ-ent pharmacological activities, pharmacokinetic processes and toxicity[1,2]. The most well-docu- mented example is that of the drug substance thalidomide. Bitter lessons and scientific research promote the interest in single-enantiomer drugs, so the potential of the chiral drug market is enormous[3]. …     

Highly enantioselective fluorescent recognition of mandelic acid derivatives by chiral salen macrocycles

Calixarene-like chiral salen macrocycles can be used for the enantioselective fluorescent recognition of mandelic acid derivatives. It was observed that one enantiomer of mandelic acid causes a 28-fold increase in the fluorescence intensity of a chiral salen macrocycle, whereas the other enantiomer causes only a 14-fold fluorescence enhancement. This highly enantioselective fluorescent response makes chiral salen macrocycles useful for the enantioselective fluorescent recognition of some mandelic acid derivatives.     

手性高效液相色谱法测定1—（6‘—甲氧基萘）乙醇不对称氢酯基化反应

在自制的硅基纤维素－三（３，５－二甲基苯基氨基甲酸酯）高效液相色谱手性固定相上（ＨＰＬＣ－ＣＳＰ），优化了１－（６＇－甲氧基萘）乙醇氢酯基化反应产物－萘普生甲酯手性分离的条件，测定了相应的一系列不对称氢酯基化反应产物的对映体过剩值（ｅ．ｅ．值）。结果表明，在ＣＤＭＰＣ－ＣＳＰ手性柱上用ＨＰＬＣ测定此类不对称催化反应的光学产率，评价催化剂体系的手性选择是一种非常理想的方法。     

Scalemic and racemic imprinting with a chiral crosslinker

The development of molecularly imprinted chiral stationary phases has traditionally been limited by the need for a chiral pure template. Paradoxically, availability of a chiral pure template largely defeats the purpose of developing a chiral stationary phase. To solve this paradox, imprinting of scalemic and racemic template mixtures was investigated using both chiral (N-α-bismethacryloyl-l-alanine) and achiral (N,O-bisacrylamide ethanolamine) crosslinkers. Imprinting of scalemic mixtures provided polymers capable of partial separation of Boc-tyrosine enantiomers with virtually the same results when using either the chiral or achiral crosslinker. However, the chiral crosslinker was required for chiral differentiation by the racemic imprinted polymers which were evaluated in both batch rebinding and chromatographic modes. Batch rebinding analysis revealed intersecting binding isotherms for the L- and D-Boc-tyrosine, indicating bias for the D or L enantiomer is concentration dependent. Partial chromatographic separation was achieved by the racemic imprinted polymers providing variable D or L bias in equal probability over multiple replicates of polymer synthesis. Correlation of enantiomer bias with the batch rebinding results and optimization of HPLC parameters are discussed.