Poly(p‐vinylbenzoic acid)‐block‐polystyrene Self‐assembled Structures as Templates in the Synthesis of ZIF‐8

Hybrid nanocrystals of PVBA‐b ‐PS/ZIF‐8 were prepared by the growth of ZIF‐8 on the surface of the self‐assembled structures from poly(p ‐vinylbenzoic acid)‐block‐polystyrene. Two different morphologies—micelles and vesicles—were obtained in selective solvents owing to the different ratios of PVBA to PS blocks. The structure and morphology of the PVBA‐b ‐PS/ZIF‐8 composites were characterized by Fourier transform IR spectroscopy, thermogravimetric analysis, X‐ray diffraction, transmission electron microscopy and scanning electron microscopy. PVBA‐b ‐PS/ZIF‐8 showed high catalytic performance in Knoevenagel condensation reactions at room temperature, which were attributed to the more exposed active sites of the small ZIF‐8 nanocrystals grown in a confined space and a high concentration of reactants in the polymeric aggregates.     

Synthesis of double‐hydrophilic block copolymers via combination of oxyanion‐initiated polymerization and polymer reaction for fabricating magnetic target gene carrier

In this work, we have synthesized a polycation and a polyanion via a combination of oxyanion‐initiated polymerization and polymer reaction, and then developed a novel approach to prepare a controlled magnetic target gene carrier with magnetic Fe₃O₄ nanoparticles as core and poly(ethylene glycol) (PEG) segment as corona via layer‐by‐layer (LbL) assembly and shell‐crosslinking. Magnetic nanoparticles (MNPs) were first modified by poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) via radical polymerization. The resulting MNPs were used to compact deoxyribonucleic acid (DNA) through LbL assembly, involving four steps: ( 1 ) the binding of DNA to the polycation PDMAEMA on the surface of MNPs; ( 2 ) the produced particles in Step 1 with negative charge interacting with additional polycation ethoxy group end‐capped PDMAEMA (EtO‐PDMAEMA) homopolymer, leading to a positive charge surface; ( 3 ) using carboxyl group (‐COO^‐) of poly(methacrylic acid) (PMAA) in a diblock copolymer (MePEG2000‐b‐PMAA_SH) as polyanion, which has partial mercapto groups (‐SH) in PMAA segment, to interact with the particles produced in Step 2; ( 4 ) the shell of the composite nanoparticle was crosslinked by oxidizing the ‐SH groups of the MePEG2000‐b‐PMAA_SH to form disulfide linkage (S? S). All the processes of LbL assembly were investigated by agarose gel retardation assay and zeta potential measurements. The in vitro cytotoxicity analysis proves that polyions/DNA MNPs have excellent properties and potential applications as gene carriers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Formation of Ultrathin,Continuous Metal–Organic Framework Membranes on Flexible Polymer Substrates

Metal–organic framework (MOF) materials have an enormous potential in separation applications, but to realize their potential as semipermeable membranes they need to be assembled into thin continuous macroscopic films for fabrication into devices. By using a facile immersion technique, we prepared ultrathin, continuous zeolitic imidazolate framework (ZIF‐8) membranes on titania‐functionalized porous polymeric supports. The coherent ZIF‐8 layer was surprisingly flexible and adhered well to the support, and the composite membrane could sustain bending and elongation. The membranes exhibited molecular sieving behavior, close to the theoretical permeability of ZIF‐8, with hydrogen permeance up to 201×10^?7 mol m^?2 s^?1 Pa^?1 and an ideal H₂/CO₂ selectivity of 7:1. This approach offers significant opportunities to exploit the unique properties of MOFs in the fabrication of separation and sensing devices.     

Cancer‐Cell Imaging Using Copper‐Doped Zeolite Imidazole Framework‐8 Nanocrystals Exhibiting Oxidative Catalytic Activity

Copper‐doped zeolite imidazole framework‐8 (Cu/ZIF‐8) was prepared and its peroxidase‐like oxidative catalytic activity was examined with a demonstration of its applicability for cancer‐cell imaging. Through simple solution chemistry at room temperature, Cu/ZIF‐8 nanocrystals were produced that catalytically oxidized an organic substrate of o‐phenylenediamine in the presence of H₂O₂. In a similar manner to peroxidase, the Cu/ZIF‐8 nanocrystals oxidized the substrate through a ping‐pong mechanism with an activation energy of 59.2 kJ mol⁻¹. The doped Cu atoms functioned as active sites in which the active Cu intermediates were expected to be generated during the catalysis, whereas the undoped ZIF‐8 did not show any oxidative activity. Cu/ZIF‐8 nanocrystals exhibited low cell toxicity and displayed catalytic activity through interaction with H₂O₂ among various reactive oxygen species in a cancer cell. This oxidative activity in vitro allowed cancer‐cell imaging by exploiting the photoluminescence emitted from the oxidized product of o‐phenylenediamine, which was insignificant in the absence of the Cu/ZIF‐8 nanocrystals. The results of this study suggest that the Cu/ZIF‐8 nanocrystal is a promising catalyst for the analysis of the microbiological systems.     

Pd Nanocubes@ZIF‐8: Integration of Plasmon‐Driven Photothermal Conversion with a Metal–Organic Framework for Efficient and Selective Catalysis

Composite nanomaterials usually possess synergetic properties resulting from the respective components and can be used for a wide range of applications. In this work, a Pd nanocubes@ZIF‐8 composite material has been rationally fabricated by encapsulation of the Pd nanocubes in ZIF‐8, a common metal–organic framework (MOF). This composite was used for the efficient and selective catalytic hydrogenation of olefins at room temperature under 1 atm H₂ and light irradiation, and benefits from plasmonic photothermal effects of the Pd nanocube cores while the ZIF‐8 shell plays multiple roles; it accelerates the reaction by H₂ enrichment, acts as a “molecular sieve” for olefins with specific sizes, and stabilizes the Pd cores. Remarkably, the catalytic efficiency of a reaction under 60 mW cm^?2 full‐spectrum or 100 mW cm^?2 visible‐light irradiation at room temperature turned out to be comparable to that of a process driven by heating at 50 °C. Furthermore, the catalyst remained stable and could be easily recycled. To the best of our knowledge, this work represents the first combination of the photothermal effects of metal nanocrystals with the favorable properties of MOFs for efficient and selective catalysis.     

Electrocatalytic Oxidation of Dopamine at a Nanocuprous Oxide‐Methylene Blue Composite Glassy Carbon Electrode

Cuprous oxide nanowhisker was prepared by using cetyltrimethyl ammonium bromide (CATB) as soft template, and was characterized by XRD and TEM methods. The electrochemical properties of nano‐Cu₂O and nano‐Cu₂O‐methylene blue (MB) modified electrode were studied. The experimental results indicate that nano‐Cu₂O shows a couple of redox peaks corresponding to the redox of Cu(II)/Cu(I), the peak currents are linear to the scan rates which demonstrate that the electrochemical response of Cu₂O is surface‐controlled. The composite nano‐Cu₂O‐Nafion‐MB modified electrode shows a trend of decrease of peak currents corresponding to the Cu (II)/Cu (I). However, the electrocatalytic ability of nano‐Cu₂O‐MB composite film to dopamine increases dramatically. At this composite electrode, dopamine shows a couple of quasireversible redox peaks with a peak separation of 106 mV, the peak current increases about 8 times and the oxidation peak potential decreases about 200 mV as compared to that at bare glassy carbon electrode. The peak currents change linearly with concentration of dopamine from 1×10^?7 to 3.2×10^?4 mol/L, the detection limit is 4.6×10^?8 mol/L. The composite electrode can effectively eliminate the interference of ascorbic acid and has better stability and excellent reproducibility.     

Polymer Composite Membrane with Penetrating ZIF‐7 Sheets Displays High Hydrogen Permselectivity

Oriented and penetrating molecular sieving membranes display enhanced separation performance. A polyimide (PI) solution containing highly dispersed ZIF‐7(III) sheets in CHCl₃ was deposited on a glass side and subjected to flat‐scraping with a membrane fabricator. In this way we developed a novel oriented and penetrating ZIF‐7@PI mixed matrix membrane (MMM) with 50 wt. % ZIF‐7 loading. Because the height of the ZIF‐7 sheets (5 μm) is higher than the film thickness, every ZIF‐7 sheet penetrates both surfaces of the polyimide film. Since the ZIF‐7 channels are the dominant pathway for gas permeation, the ZIF‐7@PI MMM displays a high molecular sieve performance for the separation of H₂ (0.29 nm) from larger gas molecules. At 100 °C and 2 bar, the mixture separation factors of H₂/CO₂ and H₂/CH₄ are 91.5 and 128.4, with a high H₂ permeance of about 3.0×10^?7 mol m^?2 s^?1 Pa^?1, which is promising for hydrogen separation by molecular sieving.     

Amidation‐Dominated Re‐Assembly Strategy for Single‐Atom Design/Nano‐Engineering: Constructing Ni/S/C Nanotubes with Fast and Stable K‐Storage

An amidation‐dominated re‐assembly strategy is developed to prepare uniform single atom Ni/S/C nanotubes. In this re‐assembly process, a single‐atom design and nano‐structured engineering are realized simultaneously. Both the NiO₅ single‐atom active centers and nanotube framework endow the Ni/S/C ternary composite with accelerated reaction kinetics for potassium‐ion storage. Theoretical calculations and electrochemical studies prove that the atomically dispersed Ni could enhance the convention kinetics and decrease the decomposition energy barrier of the chemically‐absorbed small‐molecule sulfur in Ni/S/C nanotubes, thus lowering the electrode reaction overpotential and resistance remarkably. The mechanically stable nanotube framework could well accommodate the volume variation during potassiation/depotassiation process. As a result, a high K‐storage capacity of 608 mAh g^?1 at 100 mA g^?1 and stable cycling capacity of 330.6 mAh g^?1 at 1000 mA g^?1 after 500 cycles are achieved.     

Metal‐Substituted Zeolitic Imidazolate Framework ZIF‐108: Gas‐Sorption and Membrane‐Separation Properties

A series of dual‐metal zeolitic imidazolate framework (ZIF) crystals with SOD and RHO topologies was synthesised by metal substitution from ZIF‐108 (Zn(2‐nitroimidazolate)₂, SOD topology) as the parent material. This was based on the concept that metal substitution of ZIF‐108 requires a much lower activation energy than homogenous nucleation owing to the metastability of ZIF‐108. In‐depth investigations of the formation processes of the daughter ZIFs indicated that the transformation of ZIF‐108 is a dissolution/heterogeneous nucleation process. Typical isostructural Co²⁺ substitution mainly occurs at the outer surface of ZIF‐108 and results in a core–shell structure. On the contrary, the Cu²⁺‐substituted ZIF has a RHO topology with a homogeneous distribution of Cu²⁺ ions in the structure. Substitution with Ni²⁺ resulted in a remarkable enhancement in adsorption selectivity toward CO₂ over N₂ by a factor of up to 227. With Co²⁺‐substituted nanoparticles as inorganic filler, a mixed matrix membrane based on polysulfone displayed greatly improved performance in the separation of H₂/CH₄, CO₂/N₂ and CO₂/CH₄.     

Photocatalytic Degradation of Imidacloprid by Phosphotungstic Acid Supported on a Mesoporous Sieve MCM‐41

Solid catalysts consisting of polyoxometalates (POM) namely phosphotungstic acid H₃PW₁₂O₄₀ (HPW) supported on a mesoporous sieve MCM‐41 have been prepared and characterized by FT‐IR, X‐ray diffraction, nitrogen adsorption and high resolution transmission electron microscope (HRTEM). The HPW/MCM‐41 with different HPW loadings from 10 to 60 wt% possess large specific surface area and rather uniform mesopores. Keggin structure of HPW retains on the prepared composite catalysts. The photocatalytic performance of HPW/MCM‐41 was examined by degradation of a durable pesticide imidacloprid. It is found that the prepared photocatalysts exhibit high activity under irradiation of 365 nm monochromatic light. For 50 mL of imidacloprid (10 mg/L), conversion of imidacloprid using 20 mg of HPW/MCM‐41 with 50 wt% loading level and calcined at 300°C reaches 58.0% after 5 h irradiation.     

Fabrication of ZIF‐8@SiO2 Core–Shell Microspheres as the Stationary Phase for High‐Performance Liquid Chromatography

The unique features of high porosity, shape selectivity, and multiple active sites make metal–organic frameworks (MOFs) promising as novel stationary phases for high‐performance liquid chromatography (HPLC). However, the wide particle size distribution and irregular shape of conventional MOFs lead to lower column efficiency of such MOF‐packed columns. Herein, the fabrication of monodisperse MOF@SiO₂ core–shell microspheres as the stationary phase for HPLC to overcome the above‐mentioned problems is reported. Zeolitic imidazolate framework 8 (ZIF‐8) was used as an example of MOFs due to its permanent porosity, uniform pore size, and exceptional chemical stability. Unique carboxyl‐modified silica spheres were used as the support to grow the ZIF‐8 shell. The fabricated monodisperse ZIF‐8@SiO₂ packed columns (5 cm long × 4.6 mm i.d.) show high column efficiency (23 000 plates m^?1 for bisphenol A) for the HPLC separation of endocrine‐disrupting chemicals (bisphenol A, β‐estradiol, and p‐(tert‐octyl)phenol) and pesticides (thiamethoxam, hexaflumuron, chlorantraniliprole, and pymetrozine) within 7 min with good relative standard deviations for 11 replicate separations of the analytes (0.01–0.39, 0.65–1.7, 0.70–1.3, and 0.17–0.91 % for retention time, peak area, peak height, and half peak width, respectively). The ZIF‐8@SiO₂ microspheres combine the advantages of the good column packing properties of the uniform monodisperse silica microspheres and the separation ability of the ZIF‐8 crystals.     

Novel C60‐Anchored Two‐Armed Poly(tert‐butyl acrylate): Synthesis and Characterization

Summary: A multistep synthetic procedure for preparing novel C₆₀‐anchored two‐armed poly(tert‐butyl acrylate) was developed. First, two‐armed poly(tert‐butyl acrylate) bearing a malonate ester core with well‐controlled molecular weight was synthesized through atom transfer radical polymerization. The effective Bingel reaction between C₆₀ and the well‐defined polymer was then carried out to yield C₆₀‐anchored polymer. GPC, ¹H NMR, and UV‐vis spectroscopy indicated that the C₆₀‐anchored polymer was a monosubstituted and ‘closed’ 6,6‐ring‐bridged methanofullerene derivative.

Schematic of a novel C₆₀‐anchored two‐armed polymer.     

Hydrophilic dual‐responsive magnetite/PMAA core/shell microspheres with high magnetic susceptibility and ph sensitivity via distillation‐precipitation polymerization

A facile and effective approach to preparation of dual‐responsive magnetic core/shell composite microspheres is reported. The magnetite(Fe₃O₄)/poly(methacrylic acid) (PMAA) composite microspheres were synthesized through encapsulating γ‐methacryloxypropyltrimethoxysilane (MPS)‐modified magnetite colloid nanocrystal clusters (MCNCs) with crosslinked PMAA shell. First, the 200‐nm‐sized MCNCs were fabricated through solvothermal reaction, and then the MCNCs were modified with MPS to form active vinyl groups on the surface of MCNCs, and finally, a pH‐responsive shell of PMAA was coated onto the surface of MCNCs by distillation‐precipitation polymerization. The transmission electron microscopy (TEM) and vibrating sample magnetometer characterization showed that the obtained composite microspheres had well‐defined core/shell structure and high saturation magnetization value (35 emu/g). The experimental results indicated that the thickness and degree of crosslinking of PMAA shell could be well‐controlled. The pH‐induced change in size exhibited by the core/shell microspheres reflected the PMAA shell contained large amount of carboxyl groups. The carboxyl groups and high saturation magnetization make these microspheres have a great potential in biomolecule separation and drug carriers. Moreover, we also demonstrated that other magnetic polymeric microspheres, such as Fe₃O₄/PAA, Fe₃O₄/PAM, and Fe₃O₄/PNIPAM, could be synthesized by this approach. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

In Situ Fabrication of Inorganic/Organic Hybrid Based on Cu/Co‐ZIF and Cu2O

We successfully fabricate a well‐defined inorganic/organic hybrid Cu₂O@Cu/Co‐ZIF (ZIF=zeolitic imidazolate frameworks) by use of growth of dual‐metal Cu/Co‐ZIF on the obtained Cu₂O hollow spheres. The key point of the strategy is coupling the in situ self‐sacrificing template. Cu₂O and the coordination of metal ions (Cu⁺ and Co²⁺) with 2‐methylimidazole. This new hybrid was characterized by powder X‐ray diffraction, (scanning) transmission electron microscopy, energy‐dispersive spectroscopy mapping, in situ FT‐IR spectroscopy, UV/Vis diffuse reflection spectroscopy, N₂ sorption measurements, and electron spin resonance. It was evidenced that Cu/Co‐ZIF nanocrystals have been assembled to continuous shells surrounding the Cu₂O cores as well as in the voids between layers and inner pores. Cu₂O@Cu/Co‐ZIF exhibits visible light responsiveness and holds potential as narrow band gap semiconductor and visible photocatalyst.     

Hollow Zn/Co ZIF Particles Derived from Core–Shell ZIF‐67@ZIF‐8 as Selective Catalyst for the Semi‐Hydrogenation of Acetylene

The rational design of metal–organic frameworks (MOFs) with hollow features and tunable porosity at the nanoscale can enhance their intrinsic properties and stimulates increasing attentions. In this Communication, we demonstrate that methanol can affect the coordination mode of ZIF‐67 in the presence of Co²⁺ and induces a mild phase transformation under solvothermal conditions. By applying this transformation process to the ZIF‐67@ZIF‐8 core–shell structures, a well‐defined hollow Zn/Co ZIF rhombic dodecahedron can be obtained. The manufacturing of hollow MOFs enables us to prepare a noble metal@MOF yolk‐shell composite with controlled spatial distribution and morphology. The enhanced gas storage and porous confinement that originate from the hollow interior and coating of ZIF‐8 confers this unique catalyst with superior activity and selectivity toward the semi‐hydrogenation of acetylene.     

Facile preparation of Ag/Ag2WO4/g‐C3N4 ternary plasmonic photocatalyst and its visible‐light photocatalytic activity

Introducing plasmonic metals into semiconductor materials has been proven to be an attractive strategy for enhancing photocatalytic activity in the visible region. In this work, a novel and efficient Ag/Ag₂WO₄/g‐C₃N₄ (AACN) ternary plasmonic photocatalyst was successfully synthesized using a facile one‐step in situ hydrothermal method. The composition, structure, morphology and optical absorption properties of AACN were investigated using X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–visible diffuse reflectance spectroscopy, respectively. Photocatalytic performance of AACN was evaluated via rhodamine B and tetracycline degradation. The results indicated that AACN had excellent photocatalytic performance for rhodamine B degradation with a rate constant of 0.0125 min^?1, which was higher than those of Ag₂WO₄ and Ag/Ag₂WO₄. Characterization and photocatalytic tests showed that the strong coupling effect between the Ag/Ag₂WO₄ nanoparticles and the exfoliated ultrathin g‐C₃N₄ nanosheets was superior for visible‐light responsivity and reduced the recombination rate of photogenerated electrons and holes. A proposed mechanism is also discussed according to the band energy structure and the experimental results.     

Degradation of poly(acrylates) under SF5+ primary ion bombardment studied using time‐of‐flight secondary ion mass spectrometry. 1. Effect of main chain and pendant methyl groups

Polyatomic primary ions have been applied recently to the depth profiling of organic materials by secondary ion mass spectrometry (SIMS). Polyatomic primary ions offer low penetration depth and high damage removal rates in some polymers, but the relationship between polymer chemistry and degradation under polyatomic primary ion bombardment has not been studied systematically. In this study, positive and negative ion time‐of‐flight SIMS (ToF‐SIMS) was used to measure the damage of ～100 nm thick spin‐cast poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA) and poly(methacrylic acid) (PMAA), films under extended (～2 × 10¹⁴ ions cm^?2) 5 keV SF₅⁺ bombardment. These polymers were compared to determine the effect of the main chain and pendant methyl groups on their degradation under SF₅⁺ bombardment. The sputter rate of PMMA was approximately twice that of PMA or PMAA and the rate of damage accumulation was higher for PMA and PMAA than PMMA, suggesting that the main chain and pendant methyl groups played an important role in the degradation of these polymers under SF₅⁺ bombardment. These results are consistent with the literature on the thermal and radiation‐induced degradation of these polymers, which show that removal of the main chain or pendant methyl groups reduces the rate of depolymerization and increases the rate of intra‐ or intermolecular cross‐linking. Copyright © 2004 John Wiley & Sons, Ltd.     

ZIF‐Induced d‐Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d‐band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat^?1 h^?1 under ambient conditions. The strategy lowers electrocatalyst d‐band position to weaken H adsorption and concurrently creates electron‐deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44‐fold compared to without ZIF (ca. 1 %). The Pt/Au‐N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Development of versatile CdMoO4/g-C3N4 nanocomposite for enhanced photoelectrochemical oxygen evolution reaction and photocatalytic dye degradation applications

Fabrication of an efficient, stable, and versatile photocatalysts for the energy and environment remediation applications is an urgent task for the current researchers. In this work, we have successfully synthesized a versatile hybrid photocatalysts, i.e.; CdMoO₄/g-C₃N₄ (CMO/CN) by a facile and simple one-pot in-situ hydrothermal method. Here CdMoO₄ (CMO) microspheres were deposited on the g-C₃N₄ (CN) sheets. Fabricated CN, CMO, and CMO/CN composite photocatalysts were analyzed with various characterization techniques like UV–visible diffuse reflectance spectra (UV–Vis DRS), photoluminescence spectroscopy (PL), time-resolved fluorescence lifetime (TRFL), electrochemical impedance spectroscopy (EIS), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy–energy-dispersive X-ray analysis (SEM-EDX), transmission electron microscope (TEM), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (BET). The results reveal that the formation of a strong heterojunction between two semiconductors leads to the formation of active photocatalyst. Furthermore, as-synthesized materials were tested for the photoelectrocatalytic (PEC) oxygen evolution reactions (OERs) in acidic medium, and photocatalytic (PC) degradation of methylene blue (MB) under light irradiation. Among all tested samples, CMO/CN-10 has shown the highest current density 52.74 mA cm^?2 at 1.95 V with lowest over potential of 0.70 mV on glassy carbon electrode for OER in acidic medium under the light irradiation. The PC degradation rate constant of CMO/CN-10 composite in MB solution is k = 2.0 × 10^?2 min^?1, whereas for the pure CMO and CN degradation rate constant is k = 5.7 × 10^?3 min^?1 and k = 1.2 × 10^?2 min^?1, respectively. This enhancement in PEC and PC properties is due to the fast migration of photo-induced electrons in the case of CMO/CN-10 nanocomposite. Trapping experiment results reveal the major reactive species for PC degradation of MB is ?OH (hydroxyl radicals) and h⁺ (holes), respectively, and suitable PC reaction mechanism also proposed for CMO/CN-10 composites. Based on the above remarkable results, it would be a potential nanocomposite for the PEC oxygen evolution and PC degradation of MB under light illumination.