Cancer‐Cell Imaging Using Copper‐Doped Zeolite Imidazole Framework‐8 Nanocrystals Exhibiting Oxidative Catalytic Activity

Copper‐doped zeolite imidazole framework‐8 (Cu/ZIF‐8) was prepared and its peroxidase‐like oxidative catalytic activity was examined with a demonstration of its applicability for cancer‐cell imaging. Through simple solution chemistry at room temperature, Cu/ZIF‐8 nanocrystals were produced that catalytically oxidized an organic substrate of o‐phenylenediamine in the presence of H₂O₂. In a similar manner to peroxidase, the Cu/ZIF‐8 nanocrystals oxidized the substrate through a ping‐pong mechanism with an activation energy of 59.2 kJ mol⁻¹. The doped Cu atoms functioned as active sites in which the active Cu intermediates were expected to be generated during the catalysis, whereas the undoped ZIF‐8 did not show any oxidative activity. Cu/ZIF‐8 nanocrystals exhibited low cell toxicity and displayed catalytic activity through interaction with H₂O₂ among various reactive oxygen species in a cancer cell. This oxidative activity in vitro allowed cancer‐cell imaging by exploiting the photoluminescence emitted from the oxidized product of o‐phenylenediamine, which was insignificant in the absence of the Cu/ZIF‐8 nanocrystals. The results of this study suggest that the Cu/ZIF‐8 nanocrystal is a promising catalyst for the analysis of the microbiological systems.     

Efficient Coupling of Solar Energy to Catalytic Hydrogenation by Using Well‐Designed Palladium Nanostructures

A Ru³⁺‐mediated synthesis for the unique Pd concave nanostructures, which can directly harvest UV‐to‐visible light for styrene hydrogenation, is described. The catalytic efficiency under 100 mW cm^?2 full‐spectrum irradiation at room temperature turns out to be comparable to that of thermally (70 °C) driven reactions. The yields obtained with other Pd nanocrystals, such as nanocubes and octahedrons, are lower. The nanostructures reported here have sufficient plasmonic cross‐sections for light harvesting in a broad spectral range owing to the reduced shape symmetry, which increases the solution temperature for the reaction by the photothermal effect. They possess a large quantity of atoms at corners and edges where local heat is more efficiently generated, thus providing active sites for the reaction. Taken together, these factors drastically enhance the hydrogenation reaction by light illumination.     

HPW/PDMAEMA‐b‐PMAA/ZIF‐8 Ternary Lamellar Composite and the Photocatalytic Degradation of Methylene Blue

PDMAEMA‐b‐PMAA block copolymers were prepared by the sequential RAFT polymerization of DMAEMA and tBMA, followed by hydrolysis. Phosphotungstic acid (HPW) was anchored to the PDMAEMA blocks through electrostatic interactions and the as‐obtained HPW/PDMAEMA‐b‐PMAA was added to the synthesis of ZIF‐8. During the formation of ZIF‐8, the PMAA blocks coordinated to the Zn²⁺ ions through their carboxy groups, along with the HPW groups that were anchored to the PDMAEMA blocks. In this way, the block copolymer could consolidate the interactions between HPW and ZIF‐8 and prevent the leakage of HPW. Finally, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite was obtained and the structure of the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 hybrid material was characterized by using powder X‐ray diffraction (PXRD), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). As a photocatalyst, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite showed excellent photoactivity for the degradation of methylene blue (MB). The rate of degradation of MB was 0.0240 min^?1, which was 7.5‐times higher than that of commercially available P25 (0.0032 min^?1). In the presence of H₂O₂, the kinetic degradation parameters of the composite reached 0.0634 min^?1, which was about 19.8‐times higher than that of P25.     

Electrochemical Synthesis and Catalytic Properties of Encapsulated Metal Clusters within Zeolitic Imidazolate Frameworks

It is very interesting and also a big challenge to encapsulate metal clusters within microporous solids to expand their application diversity. For this target, herein, we present an electrochemical synthesis strategy for the encapsulation of noble metals (Au, Pd, Pt) within ZIF‐8 cavities. In this method, metal precursors of AuCl₄^2?, PtCl₆^2?, and PdCl₄^2? are introduced into ZIF‐8 crystals during the concurrent crystallization of ZIF‐8 at the anode. As a consequence, very small metal clusters with sizes around 1.2 nm are obtained within ZIF‐8 crystals after hydrogen reduction; these clusters exhibit high thermal stability, as evident from the good maintenance of their original sizes after a high‐temperature test. The catalytic properties of the encapsulated metal clusters within ZIF‐8 are evaluated for CO oxidations. Because of the small pore window of ZIF‐8 (0.34 nm) and the confinement effect of small pores, about 80 % of the metal clusters (fractions of 0.74, 0.77, and 0.75 for Au, Pt, and Pd in ZIF‐8, respectively) retain their catalytic activity after exposure to the organosulfur poison thiophene (0.46 nm), which is in contrast to their counterparts (fractions of 0.22, 0.25, and 0.20 for Au, Pt, and Pd on the SiO₂ support). The excellent performances of metal clusters encapsulated within ZIF‐8 crystals give new opportunities for catalytic reactions.     

Carbon‐Nanotube‐Supported Bio‐Inspired Nickel Catalyst and Its Integration in Hybrid Hydrogen/Air Fuel Cells

A biomimetic nickel bis‐diphosphine complex incorporating the amino acid arginine in the outer coordination sphere was immobilized on modified carbon nanotubes (CNTs) through electrostatic interactions. The functionalized redox nanomaterial exhibits reversible electrocatalytic activity for the H₂/2 H⁺ interconversion from pH 0 to 9, with catalytic preference for H₂ oxidation at all pH values. The high activity of the complex over a wide pH range allows us to integrate this bio‐inspired nanomaterial either in an enzymatic fuel cell together with a multicopper oxidase at the cathode, or in a proton exchange membrane fuel cell (PEMFC) using Pt/C at the cathode. The Ni‐based PEMFC reaches 14 mW cm⁻², only six‐times‐less as compared to full‐Pt conventional PEMFC. The Pt‐free enzyme‐based fuel cell delivers ≈2 mW cm⁻², a new efficiency record for a hydrogen biofuel cell with base metal catalysts.     

Heck coupling reaction using monomeric ortho‐palladated complex of 4‐methoxy‐ benzoylmethylenetriphenylphosphorane under microwave irradiation

The activity of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex, A (MOBPPY = 4‐methoxybenzoylmethylenetriphenyl‐ phosphoraneylide), was investigated in the Heck–Mizoroki C? C cross‐coupling reaction under conventional heating and microwave irradiation conditions. The complex is an active and efficient catalyst for the Heck reaction of aryl halides. The yields were excellent using a catalytic amount of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex in N‐methyl‐2‐pyrrolidinone (NMP) at 130 °C and 600 W. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Metal‐Substituted Zeolitic Imidazolate Framework ZIF‐108: Gas‐Sorption and Membrane‐Separation Properties

A series of dual‐metal zeolitic imidazolate framework (ZIF) crystals with SOD and RHO topologies was synthesised by metal substitution from ZIF‐108 (Zn(2‐nitroimidazolate)₂, SOD topology) as the parent material. This was based on the concept that metal substitution of ZIF‐108 requires a much lower activation energy than homogenous nucleation owing to the metastability of ZIF‐108. In‐depth investigations of the formation processes of the daughter ZIFs indicated that the transformation of ZIF‐108 is a dissolution/heterogeneous nucleation process. Typical isostructural Co²⁺ substitution mainly occurs at the outer surface of ZIF‐108 and results in a core–shell structure. On the contrary, the Cu²⁺‐substituted ZIF has a RHO topology with a homogeneous distribution of Cu²⁺ ions in the structure. Substitution with Ni²⁺ resulted in a remarkable enhancement in adsorption selectivity toward CO₂ over N₂ by a factor of up to 227. With Co²⁺‐substituted nanoparticles as inorganic filler, a mixed matrix membrane based on polysulfone displayed greatly improved performance in the separation of H₂/CH₄, CO₂/N₂ and CO₂/CH₄.     

Entropy‐Driven Mechanochemical Synthesis of Polymetallic Zeolitic Imidazolate Frameworks for CO2 Fixation

High‐entropy materials refer to a kind of materials in which five or more metal species were incorporated deliberately into a single lattice with random occupancy. Up to now, such a concept has been only restricted to hard materials, such as high‐entropy alloys and ceramics. Herein we report the synthesis of hybrid high‐entropy materials, polymetallic zeolitic imidazolate framework (also named as high‐entropy zeolitic imidazolate framework, HE‐ZIF), via entropy‐driven room‐temperature mechanochemistry. HE‐ZIF contains five metals including Zn^II, Co^II, Cd^II, Ni^II, and Cu^II which are dispersed in the ZIF structure randomly. Moreover, HE‐ZIF shows enhanced catalytic conversion of CO₂ into carbonate compared with ZIF‐8 presumably a result of the synergistic effect of the five metal ions as Lewis acid in epoxide activation.     

Ultra‐small and highly dispersed Pd nanoparticles inside the pores of ZIF‐8: Sustainable approach to waste‐minimized Mizoroki–Heck cross‐coupling reaction based on reusable heterogeneous catalyst

The rapid development of nanomaterials, particularly advanced hybrid nanoparticles, has made new opportunities for the design and fabrication of high‐performance metal‐based catalysts. However, generating metal nanoparticles of desired size without aggregation is an important challenge for enhancing the catalytic activity of metal nanoparticles supported in the host matrix. In this work, a hybrid nanoporous material, namely Pd nanoparticles@N‐heterocyclic carbene@ZIF‐8, with a high internal surface area was successfully prepared using a dispersed anionic sulfonated N‐heterocyclic carbene–Pd(II) precursor inside the cavities of zeolitic imidazolate framework (ZIF‐8) using an impregnation approach followed by reduction with NaBH₄. The anionic sulfonated N‐heterocyclic carbene was found to be a superb ligand for the stabilization of Pd nanoparticles in the pores of ZIF‐8. The resulting system was applied to the Mizoroki–Heck cross‐coupling reaction, in which the catalyst showed high catalytic activity under mild reaction conditions.     

Polymer Composite Membrane with Penetrating ZIF‐7 Sheets Displays High Hydrogen Permselectivity

Oriented and penetrating molecular sieving membranes display enhanced separation performance. A polyimide (PI) solution containing highly dispersed ZIF‐7(III) sheets in CHCl₃ was deposited on a glass side and subjected to flat‐scraping with a membrane fabricator. In this way we developed a novel oriented and penetrating ZIF‐7@PI mixed matrix membrane (MMM) with 50 wt. % ZIF‐7 loading. Because the height of the ZIF‐7 sheets (5 μm) is higher than the film thickness, every ZIF‐7 sheet penetrates both surfaces of the polyimide film. Since the ZIF‐7 channels are the dominant pathway for gas permeation, the ZIF‐7@PI MMM displays a high molecular sieve performance for the separation of H₂ (0.29 nm) from larger gas molecules. At 100 °C and 2 bar, the mixture separation factors of H₂/CO₂ and H₂/CH₄ are 91.5 and 128.4, with a high H₂ permeance of about 3.0×10^?7 mol m^?2 s^?1 Pa^?1, which is promising for hydrogen separation by molecular sieving.     

Synthesis and characterization of low‐bandgap cyclopentadithiophene‐biselenophene copolymer and its use in field‐effect transistor and polymer solar cells

Novel series of conjugated copolymers, incorporating cyclopentadithiophene (CPDT) and the biselenophene ( R‐CPDT‐Se2 ), were synthesized by Pd‐catalyzed Stille coupling polymerization. The optical, electrochemical, field‐effect carrier mobilities, and photovoltaic properties of the R‐CPDT‐Se2 were investigated and compared with cyclopentadithiophene (CPDT) and the bithiophene ( EHex‐CPDT‐T2 ). The highest hole mobility of thin film transistor devices fabricated with new p‐type polymer semiconductors, Oct‐CPDT‐Se2 , was 1.3 × 10^?3 cm²/Vs with an on/off ratio of about 10⁵. The maximum power conversion efficiency of polymer solar cell fabricated with the blend of EHex‐CPDT‐Se2 /C₇₁‐PCBM reached 1.86% with an open circuit voltage (V_OC) of 0.55 V, a short circuit current density (J_sc) of 7.27 mA/cm², and a fill factor (FF) of 0.47 under AM 1.5G irradiation (100 mW/cm²). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

UV‐Assisted Removal of Inactive Peroxide Species for Sustained Epoxidation of Cyclooctene on Anatase TiO2

Epoxidation of olefins with H₂O₂ is one of the most important reactions in organic synthesis. We found that anatase TiO₂ can be a good catalyst for the epoxidation of cyclooctene with H₂O₂ at room temperature. However, the catalyst deactivated quickly in the presence of excess amount of H₂O₂ because of the formation of inactive side‐on Ti‐η²‐peroxide species on the surface of TiO₂, the presence of which was confirmed by isotope‐labelled resonance UV Raman spectroscopy and kinetics studies. Interestingly, the epoxidation reaction could be dramatically accelerated under irradiation of UV light with λ≥350 nm. This phenomenon is attributed to the photo‐assisted removal of the inactive peroxide species, through which the active sites on the surface of anatase TiO₂ are regenerated and the catalytic epoxidation of cyclooctene with H₂O₂ is resumed. This finding provides an alternative for sustained epoxidation reactions on TiO₂ at room temperature. Moreover, it also has significant implications on the deactivation pathway and possible solutions in Ti‐based heterogeneous catalysis or photocatalysis.     

Palladium‐Catalyzed Aerobic Intermolecular Cyclization of Acrylic Acid with 1‐Octene to Afford α‐Methylene‐γ‐butyrolactones: The Remarkable Effect of Continuous Water Removal from the Reaction Mixture and Analysis of the Reaction by Kinetic,ESI‐MS,and XAFS Measurements

Further study of our aerobic intermolecular cyclization of acrylic acid with 1‐octene to afford α‐methylene‐γ‐butyrolactones, catalyzed by the Pd(OCOCF₃)₂/Cu(OAc)₂ ? H₂O system, has clarified that the accumulation of water generated from oxygen during the reaction causes deactivation of the Cu cocatalyst. This prevents regeneration of the active Pd catalyst and, thus, has a harmful influence on the progress of the cyclization. As a result, both the substrate conversion and product yield are efficiently improved by continuous removal of water from the reaction mixture. Detailed analysis of the kinetic and spectroscopic measurements performed under the condition of continuous water removal demonstrates that the cyclization proceeds in four steps: 1) equilibrium coordination of 1‐octene to the Pd acrylate species, 2) Markovnikov‐type acryloxy palladation of 1‐octene (1,2‐addition), 3) intramolecular carbopalladation, and 4) β‐hydride elimination. Byproduct 2‐acryloxy‐1‐octene is formed by β‐hydride elimination after step 2). These cyclization steps fit the Michaelis–Menten equation well and β‐hydride elimination is considered to be a rate‐limiting step in the formation of the products. Spectroscopic data agree sufficiently with the existence of the intermediates bearing acrylate (Pd? O bond), η³‐C₈H₁₅ (Pd? C bond), or C₁₁H₁₉O₂ (Pd? C bond) moieties on the Pd center as the resting‐state compounds. Furthermore, not only Cu^II, but also Cu^I, species are observed during the reaction time of 2–8 h when the reaction proceeds efficiently. This result suggests that the Cu^II species is partially reduced to the Cu^I species when the active Pd catalytic species are regenerated.     

A comparative homocoupling reaction of aryl halides using monomeric orthopalladated complex of 4‐methoxybenzoylmethylenetri‐ phenylphosphorane under conventional and microwave irradiation conditions

The activity of [Pd(C₆H₄CH₂NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex, A (MOBPPY = 4‐methoxybenzoylmethylenetriphenylphosphoraneylide) was investigated in the homocoupling reaction of a vast range of aryl halides under both conventional and microwave irradiation conditions and their results were compared. The complex was active and showed high efficiency in the formation of new C‐C bonds. The yields were excellent using a catalytic amount of [Pd(C₆H₄CH₂NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex in N, N‐dimethylformamide at 120 °C. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times. Copyright © 2011 John Wiley & Sons, Ltd.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.     

Controlled Synthesis of Fe3O4/ZIF‐8 Nanoparticles for Magnetically Separable Nanocatalysts

Fe₃O₄/ZIF‐8 nanoparticles were synthesized through a room‐temperature reaction between 2‐methylimidazolate and zinc nitrate in the presence of Fe₃O₄ nanocrystals. The particle size, surface charge, and magnetic loading can be conveniently controlled by the dosage of Zn(NO₃)₂ and Fe₃O₄ nanocrystals. The as‐prepared particles show both good thermal stability (stable to 550 °C) and large surface area (1174 m²g^?1). The nanoparticles also have a superparamagnetic response, so that they can strongly respond to an external field during magnetic separation and disperse back into the solution after withdrawal of the magnetic field. For the Knoevenagel reaction, which is catalyzed by alkaline active sites on external surface of catalyst, small Fe₃O₄/ZIF‐8 nanoparticles show a higher catalytic activity. At the same time, the nanocatalysts can be continuously used in multiple catalytic reactions through magnetic separation, activation, and redispersion with little loss of activity.     

NIR‐II Driven Plasmon‐Enhanced Catalysis for a Timely Supply of Oxygen to Overcome Hypoxia‐Induced Radiotherapy Tolerance

Hypoxia, as a characteristic feature of solid tumor, can significantly adversely affect the outcomes of cancer radiotherapy (RT), photodynamic therapy, or chemotherapy. In this study, a strategy is developed to overcome tumor hypoxia‐induced radiotherapy tolerance. Specifically, a novel two‐dimensional Pd@Au bimetallic core–shell nanostructure (TPAN) was employed for the sustainable and robust production of O₂ in long‐term via the catalysis of endogenous H₂O₂. Notably, the catalytic activity of TPAN could be enhanced via surface plasmon resonance (SPR) effect triggered by NIR‐II laser irradiation, to enhance the O₂ production and thereby relieve tumor hypoxia. Thus, TPAN could enhance radiotherapy outcomes by three aspects: 1) NIR‐II laser triggered SPR enhanced the catalysis of TPAN to produce O₂ for relieving tumor hypoxia; 2) high‐Z element effect arising from Au and Pd to capture X‐ray energy within the tumor; and 3) TPAN affording X‐ray, photoacoustic, and NIR‐II laser derived photothermal imaging, for precisely guiding cancer therapy, so as to reduce the side effects from irradiation.     

Dual‐Mode Antibacterial Conjugated Polymer Nanoparticles for Photothermal and Photodynamic Therapy

In this work, dual‐mode antibacterial conjugated polymer nanoparticles (DMCPNs) combined with photothermal therapy (PTT) and photodynamic therapy (PDT) are designed and explored for efficient killing of ampicillin‐resistant Escherichia coli (Amp^r E. coli). The DMCPNs are self‐assembled into nanoparticles with a size of 50.4 ± 0.6 nm by co‐precipitation method using the photothermal agent poly(diketopyrrolopyrrole‐thienothiophene) (PDPPTT) and the photosensitizer poly[2‐methoxy‐5‐((2‐ethylhexyl)oxy)‐p‐phenylenevinylene] (MEH‐PPV) in the presence of poly(styrene‐co‐maleic anhydride) which makes nanoparticles disperse well in water via hydrophobic interactions. Thus, DMCPNs simultaneously possess photothermal effect and the ability of sensitizing oxygen in the surrounding to generate reactive oxygen species upon the illumination of light, which could easily damage resistant bacteria. Under combined irradiation of near‐infrared light (550 mW cm^?2, 5 min) and white light (65 mW cm^?2, 5 min), DMCPNs with a concentration of 9.6 × 10^?4 µm could reach a 93% inhibition rate against Amp^r E. coli, which is higher than the efficiency treated by PTT or PDT alone. The dual‐mode nanoparticles provide potential for treating pathogenic infections induced by resistant microorganisms in clinic.     

A Phthalocyanine‐Based Layered Two‐Dimensional Conjugated Metal–Organic Framework as a Highly Efficient Electrocatalyst for the Oxygen Reduction Reaction

Layered two‐dimensional (2D) conjugated metal–organic frameworks (MOFs) represent a family of rising electrocatalysts for the oxygen reduction reaction (ORR), due to the controllable architectures, excellent electrical conductivity, and highly exposed well‐defined molecular active sites. Herein, we report a copper phthalocyanine based 2D conjugated MOF with square‐planar cobalt bis(dihydroxy) complexes (Co‐O₄) as linkages (PcCu‐O₈‐Co) and layer‐stacked structures prepared via solvothermal synthesis. PcCu‐O₈‐Co 2D MOF mixed with carbon nanotubes exhibits excellent electrocatalytic ORR activity (E_1/2=0.83 V vs. RHE, n=3.93, and j_L=5.3 mA cm^?2) in alkaline media, which is the record value among the reported intrinsic MOF electrocatalysts. Supported by in situ Raman spectro‐electrochemistry and theoretical modeling as well as contrast catalytic tests, we identified the cobalt nodes as ORR active sites. Furthermore, when employed as a cathode electrocatalyst for zinc–air batteries, PcCu‐O₈‐Co delivers a maximum power density of 94 mW cm^?2, outperforming the state‐of‐the‐art Pt/C electrocatalysts (78.3 mW cm^?2).     

Formation of Ultrathin,Continuous Metal–Organic Framework Membranes on Flexible Polymer Substrates

Metal–organic framework (MOF) materials have an enormous potential in separation applications, but to realize their potential as semipermeable membranes they need to be assembled into thin continuous macroscopic films for fabrication into devices. By using a facile immersion technique, we prepared ultrathin, continuous zeolitic imidazolate framework (ZIF‐8) membranes on titania‐functionalized porous polymeric supports. The coherent ZIF‐8 layer was surprisingly flexible and adhered well to the support, and the composite membrane could sustain bending and elongation. The membranes exhibited molecular sieving behavior, close to the theoretical permeability of ZIF‐8, with hydrogen permeance up to 201×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ and an ideal H₂/CO₂ selectivity of 7:1. This approach offers significant opportunities to exploit the unique properties of MOFs in the fabrication of separation and sensing devices.