Cancer‐Cell Imaging Using Copper‐Doped Zeolite Imidazole Framework‐8 Nanocrystals Exhibiting Oxidative Catalytic Activity

Copper‐doped zeolite imidazole framework‐8 (Cu/ZIF‐8) was prepared and its peroxidase‐like oxidative catalytic activity was examined with a demonstration of its applicability for cancer‐cell imaging. Through simple solution chemistry at room temperature, Cu/ZIF‐8 nanocrystals were produced that catalytically oxidized an organic substrate of o‐phenylenediamine in the presence of H₂O₂. In a similar manner to peroxidase, the Cu/ZIF‐8 nanocrystals oxidized the substrate through a ping‐pong mechanism with an activation energy of 59.2 kJ mol⁻¹. The doped Cu atoms functioned as active sites in which the active Cu intermediates were expected to be generated during the catalysis, whereas the undoped ZIF‐8 did not show any oxidative activity. Cu/ZIF‐8 nanocrystals exhibited low cell toxicity and displayed catalytic activity through interaction with H₂O₂ among various reactive oxygen species in a cancer cell. This oxidative activity in vitro allowed cancer‐cell imaging by exploiting the photoluminescence emitted from the oxidized product of o‐phenylenediamine, which was insignificant in the absence of the Cu/ZIF‐8 nanocrystals. The results of this study suggest that the Cu/ZIF‐8 nanocrystal is a promising catalyst for the analysis of the microbiological systems.     

HPW/PDMAEMA‐b‐PMAA/ZIF‐8 Ternary Lamellar Composite and the Photocatalytic Degradation of Methylene Blue

PDMAEMA‐b‐PMAA block copolymers were prepared by the sequential RAFT polymerization of DMAEMA and tBMA, followed by hydrolysis. Phosphotungstic acid (HPW) was anchored to the PDMAEMA blocks through electrostatic interactions and the as‐obtained HPW/PDMAEMA‐b‐PMAA was added to the synthesis of ZIF‐8. During the formation of ZIF‐8, the PMAA blocks coordinated to the Zn²⁺ ions through their carboxy groups, along with the HPW groups that were anchored to the PDMAEMA blocks. In this way, the block copolymer could consolidate the interactions between HPW and ZIF‐8 and prevent the leakage of HPW. Finally, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite was obtained and the structure of the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 hybrid material was characterized by using powder X‐ray diffraction (PXRD), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). As a photocatalyst, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite showed excellent photoactivity for the degradation of methylene blue (MB). The rate of degradation of MB was 0.0240 min^?1, which was 7.5‐times higher than that of commercially available P25 (0.0032 min^?1). In the presence of H₂O₂, the kinetic degradation parameters of the composite reached 0.0634 min^?1, which was about 19.8‐times higher than that of P25.     

Metal‐organic framework ZIF‐8 nanocrystals as pseudostationary phase for capillary electrokinetic chromatography

The outstanding properties such as large surface area, diverse structure, and accessible tunnels and cages make metal organic frameworks (MOFs) attractive as novel separation media in separation sciences. However, the utilization of MOFs in EKC has not been reported before. Here we show the exploration of zeolitic imidazolate framework‐8 (ZIF‐8), one of famous MOFs, as the pseudostationary phase (PSP) in EKC. ZIF‐8 nanocrystals were used as the PSP through dispersing in the running buffer (20 mM phosphate solution containing a 1% v/v methanol (pH 9.2)) to enhance the separation of the phenolic isomers (p‐benzenediol, m‐benzenediol, o‐benzenediol, m‐nitrophenol, p‐nitrophenol, and o‐nitrophenol). ZIF‐8 nanocrystals in the running buffer were negatively charged, and interacted with the phenolic hydroxyl groups of the analytes, and thus greatly improved the separation of the phenolic isomers. Inclusion of 200 mg L?¹ ZIF‐8 in the running buffer as the background electrolyte gave a baseline separation of the phenolic isomers within 4 min. The relative standard deviations for five replicate separations of the phenolic isomers were 0.2–1.1% for migration time and 4.5–9.7% for peak area. The limits of detection varied from 0.44 to 2.0 mg L?¹. The results show that nanosized MOFs are promising for application in EKC.     

In Situ Fabrication of Inorganic/Organic Hybrid Based on Cu/Co‐ZIF and Cu2O

We successfully fabricate a well‐defined inorganic/organic hybrid Cu₂O@Cu/Co‐ZIF (ZIF=zeolitic imidazolate frameworks) by use of growth of dual‐metal Cu/Co‐ZIF on the obtained Cu₂O hollow spheres. The key point of the strategy is coupling the in situ self‐sacrificing template. Cu₂O and the coordination of metal ions (Cu⁺ and Co²⁺) with 2‐methylimidazole. This new hybrid was characterized by powder X‐ray diffraction, (scanning) transmission electron microscopy, energy‐dispersive spectroscopy mapping, in situ FT‐IR spectroscopy, UV/Vis diffuse reflection spectroscopy, N₂ sorption measurements, and electron spin resonance. It was evidenced that Cu/Co‐ZIF nanocrystals have been assembled to continuous shells surrounding the Cu₂O cores as well as in the voids between layers and inner pores. Cu₂O@Cu/Co‐ZIF exhibits visible light responsiveness and holds potential as narrow band gap semiconductor and visible photocatalyst.     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

Micelles‐Encapsulated Microcapsules for Sequential Loading of Hydrophobic and Water‐Soluble Drugs

Layer‐by‐layer (LbL) assembly was conducted on CaCO₃ microparticles pre‐doped with polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles, and resulted in micelles encapsulation in the microcapsules after core removal. Distribution of the micelles in the templates and capsules was characterized by transmission electron microscopy and confocal laser scanning microscopy. The micelles inside the capsules connected with each other to form a chain and network‐like structure with a higher density near the capsule walls. The hydrophobic PS cores were then able to load small uncharged hydrophobic drugs while the negatively charged PAA corona could induce spontaneous deposition of water‐soluble positively charged drugs such as doxorubicin.

     

Biomimetic Superhydrophobic/Superoleophilic Highly Fluorinated Graphene Oxide and ZIF‐8 Composites for Oil–Water Separation

Superhydrophobic/superoleophilic composites HFGO@ZIF‐8 have been prepared from highly fluorinated graphene oxide (HFGO) and the nanocrystalline zeolite imidazole framework ZIF‐8. The structure‐directing and coordination‐modulating properties of HFGO allow for the selective nucleation of ZIF‐8 nanoparticles at the graphene surface oxygen functionalities. This results in localized nucleation and size‐controlled ZIF‐8 nanocrystals intercalated in between HFGO layers. The composite microstructure features fluoride groups bonded at the graphene. Self‐assembly of a unique micro‐mesoporous architecture is achieved, where the micropores originate from ZIF‐8 nanocrystals, while the functionalized mesopores arise from randomly organized HFGO layers separated by ZIF‐8 nanopillars. The hybrid material displays an exceptional high water contact angle of 162° and low oil contact angle of 0° and thus reveals very high sorption selectivity, fast kinetics, and good absorbencies for nonpolar/polar organic solvents and oils from water. Accordingly, Sponge@HFGO@ZIF‐8 composites are successfully utilized for oil–water separation.     

Metal Oxide Assisted Preparation of Core–Shell Beads with Dense Metal–Organic Framework Coatings for the Enhanced Extraction of Organic Pollutants

Dense and homogeneous metal–organic framework (MOF) coatings on functional bead surfaces are easily prepared by using intermediate sacrificial metal oxide coatings containing the metal precursor of the MOF. Polystyrene (PS) beads are coated with a ZnO layer to give ZnO@PS core–shell beads. The ZnO@PS beads are reactive in the presence of 2‐methylimidazole to transform part of the ZnO coating into a porous zeolitic imidazolate framework‐8 (ZIF‐8) external shell positioned above the internal ZnO precursor shell. The obtained ZIF‐8@ZnO@PS beads can be easily packed in column format for flow‐through applications, such as the solid‐phase extraction of trace priority‐listed environmental pollutants. The prepared material shows an excellent permeance to flow when packed as a column to give high enrichment factors, facile regeneration, and excellent reusability for the extraction of the pollutant bisphenol A. It also shows an outstanding performance for the simultaneous enrichment of mixtures of endocrine disrupting chemicals (bisphenol A, 4‐tert‐octylphenol and 4‐n‐nonylphenol), facilitating their analysis when present at very low levels (<1 μg L^?1) in drinking waters. For the extraction of the pollutant bisphenol A, the prepared ZIF‐8@ZnO@PS beads also show a superior extraction and preconcentration capacity to that of the PS beads used as precursors and the composite materials obtained by the direct growth of ZIF‐8 on the surface of the PS beads in the absence of metal oxide intermediate coatings.     

Simultaneous Spray Self‐Assembly of Highly Loaded ZIF‐8–PDMS Nanohybrid Membranes Exhibiting Exceptionally High Biobutanol‐Permselective Pervaporation

The ability to obtain a maximum loading of inorganic nanoparticles while maintaining uniform dispersion in the polymer is the key to the fabrication of mixed‐matrix membranes with high pervaporation performance in bioalcohol recovery from aqueous solution. Herein, we report the simultaneous spray self‐assembly of a zeolitic imidazolate framework (ZIF)–polymer suspension and a cross‐linker/catalyst solution as a method for the fabrication of a well‐dispersed ZIF‐8–PDMS nanohybrid membrane with an extremely high loading. The ZIF‐8–PDMS membrane showed excellent biobutanol‐permselective pervaporation performance. When the ZIF‐8 loading was increased to 40 wt %, the total flux and separation factor could reach 4846.2 g m⁻² h⁻¹ and 81.6, respectively, in the recovery of n‐butanol from 1.0 wt % aqueous solution (80 °C). This new method is expected to have serious implications for the preparation of defect‐free mixed‐matrix membranes for many applications.     

Enzyme‐Embedded Metal–Organic Framework Colloidosomes via an Emulsion‐Based Approach

Improving the activity and stability of enzymes is significant in enzyme immobilization. Here a facile approach to prepare ring‐like ZIF‐8 colloidosomes and spherical catalase‐embedded ZIF‐8 colloidosomes is developed via one‐step emulsion‐based technique at the water/butanol interface. The influence of the concentrations of ZIF‐8 nanocrystals and Pluronic F127 as well as the oil‐water ratio was investigated. Compared with in situ biomineralization, the colloidosomes prepared via the pickering emulsion method show successful encapsulation of positively charged enzymes. By using catalase as an immobilized model, the immobilized catalase exhibits high biocatalytic activity, stability and recyclability compared with free catalase.     

Effect of PS‐b‐PCL block copolymer on reaction‐induced phase separation in epoxy/PEI blend

PS‐b‐PCL block copolymer is used to study its influence on the phase evolution of epoxy resin/polyetherimides (PEI) blends cured with methyl tetrahydrophthalic anhydride. The effect of PS‐b‐PCL on the reaction‐induced phase separation of the thermosetting/thermoplastic blends is studied via optical microscopy, scanning electron microscope, and time‐resolved light scattering. The results show that secondary phase separation and typical phase inverted morphologies are obtained in the epoxy/PEI blends with addition of PS‐b‐PCL. It can be attributed to the preferential location of the PS‐b‐PCL in the epoxy‐rich phase, which enhances the viscoelastic effect of epoxy/PEI system and leads to a dynamic asymmetry system between PEI and epoxy. The PS‐b‐PCL block copolymer plays a critical role on the balance of the diffusion and geometrical growth of epoxy molecules. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1395–1402     

Synthesis of Bismuth‐Nanoparticle‐Enriched Nanoporous Carbon on Graphene for Efficient Electrochemical Analysis of Heavy‐Metal Ions

A BiNPs@NPCGS nanocomposite was designed for highly efficient detection of multiple heavy‐metal ions by in situ synthesis of bismuth‐nanoparticle (BiNP)‐enriched nanoporous carbon (NPS) on graphene sheet (GS). The NPCGS was prepared by pyrolysis of zeolitic imidazolate framework‐8 (ZIF‐8) nanocrystals deposited on graphene oxide and displayed a high surface area of 1251 m² g^?1 and a pore size of 3.4 nm. BiNPs were deposited on NPCGS in situ by chemical reduction of Bi³⁺ with NaBH₄. Due to the restrictive effect of the pore/surface structure of NPCGS, the BiNPs were uniform and well dispersed on the NPCGS. The BiNPs@NPCGS showed good conductivity and high effective area, and the presence of BiNPs allowed it to act as an efficient material for anodic‐stripping voltammetric detection of heavy‐metal ions. Under optimized conditions, the BiNPs@NPCGS‐based sensor could simultaneously determine Pb²⁺ and Cd²⁺ with detection limits of 3.2 and 4.1 nM , respectively. Moreover, the proposed sensor could also differentiate Tl⁺ from Pb²⁺ and Cd²⁺. Owing to its advantages of simple preparation, environmental friendliness, high surface area, and fast electron‐transfer ability, BiNPs@NPCGS showed promise for practical application in sensing heavy‐metal ions.     

Fabrication of ZIF‐8@SiO2 Core–Shell Microspheres as the Stationary Phase for High‐Performance Liquid Chromatography

The unique features of high porosity, shape selectivity, and multiple active sites make metal–organic frameworks (MOFs) promising as novel stationary phases for high‐performance liquid chromatography (HPLC). However, the wide particle size distribution and irregular shape of conventional MOFs lead to lower column efficiency of such MOF‐packed columns. Herein, the fabrication of monodisperse MOF@SiO₂ core–shell microspheres as the stationary phase for HPLC to overcome the above‐mentioned problems is reported. Zeolitic imidazolate framework 8 (ZIF‐8) was used as an example of MOFs due to its permanent porosity, uniform pore size, and exceptional chemical stability. Unique carboxyl‐modified silica spheres were used as the support to grow the ZIF‐8 shell. The fabricated monodisperse ZIF‐8@SiO₂ packed columns (5 cm long × 4.6 mm i.d.) show high column efficiency (23 000 plates m^?1 for bisphenol A) for the HPLC separation of endocrine‐disrupting chemicals (bisphenol A, β‐estradiol, and p‐(tert‐octyl)phenol) and pesticides (thiamethoxam, hexaflumuron, chlorantraniliprole, and pymetrozine) within 7 min with good relative standard deviations for 11 replicate separations of the analytes (0.01–0.39, 0.65–1.7, 0.70–1.3, and 0.17–0.91 % for retention time, peak area, peak height, and half peak width, respectively). The ZIF‐8@SiO₂ microspheres combine the advantages of the good column packing properties of the uniform monodisperse silica microspheres and the separation ability of the ZIF‐8 crystals.     

Aggregation Behavior of Homo‐PS/PS‐b‐P2VP Blends at the Air/Water Interface

The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.

     

Magnetic porous carbon derived from a Zn/Co bimetallic metal–organic framework as an adsorbent for the extraction of chlorophenols from water and honey tea samples

A novel magnetic porous carbon derived from a bimetallic metal–organic framework, Zn/Co‐MPC, was prepared by introducing cobalt into ZIF‐8. Magnetic porous carbon that possesses magnetic properties and a large specific surface area was firstly fabricated by the direct carbonization of Zn/Co‐ZIF‐8. The prepared magnetic porous carbon material was characterized by scanning electron microscopy, transmission electron microscopy, powder X‐ray diffraction, N₂ adsorption, and vibrating sample magnetometry. The prepared magnetic porous carbon was used as a magnetic solid‐phase extraction adsorbent for the enrichment of chlorophenols from water and honey tea samples before high‐performance liquid chromatography analysis. Several experimental parameters that could influence the extraction efficiency were investigated and optimized. Under the optimum conditions, good linearities (r > 0.9957) for all calibration curves were obtained with low limits of detection, which are in the range of 0.1–0.2 ng mL^?1 for all the analytes. The results showed that the prepared magnetic porous carbon had an excellent adsorption capability toward the target analytes.     

Microphase segregation and selective chain scission of poly(2‐methyl‐2‐oxazoline)‐block‐polystyrene

Herein, we report the design and synthesis of a block copolymer (BCP) with a high Flory–Huggins interaction parameter to access 10 nm feature sizes for potential lithographic applications. The investigated BCP is poly[(2‐methyl‐2‐oxazoline)‐block‐styrene] (PMeOx‐b‐PS), where the PMeOx segment functions as a hydrophilic segment. Two BCPs with different molecular weights were prepared using PMeOx as macroinitiator for copper(0) mediated controlled radical polymerization. The thin film self‐assembly of the obtained PMeOx‐b‐PS was performed by solvent annealing and investigated by atomic force microscopy. Both polymers formed PMeOx cylinders in a PS matrix with an average cylinder diameter of 10.5 nm. Additionally, the ability of the PMeOx domains to selectively degrade under ultraviolet irradiation was explored. It was shown that scission of the PMeOx block does occur selectively, and furthermore that the degraded domains can be removed while leaving the PS matrix intact. By combining synthetic accessibility, small feature sizes, and a selectively cleavable domain, this new BCP system holds significant promise as a lithographic mask for patterning surfaces with high precision. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1349–1357     

Facile Synthesis of Carbon‐Supported Ultrasmall Ag@Pd Core‐Shell Nanocrystals with Superior Electrocatalytic Activity for Direct Formic Acid Fuel Cell Application

To design electrocatalysts with excellent performance, morphology, composition and structure is a decisive influential factor. In this work, ultrasmall Ag@Pd core‐shell nanocrystals supported on Vulcan XC72R carbon with different Ag/Pd atomic ratios are synthesized via a facile successive reduction approach with formaldehyde and ethylene glycol as reducing agents, respectively. The Ag‐core/Pd‐shell nanostructures are revealed by high‐resolution transmission electron microscopy (HRTEM). Ag@Pd core‐shell nanocrystals possess a narrow size distribution with an average size of ca. 4.3 nm. In comparison to monometallic Pd/C and commercial Pd black catalysts, such Ag@Pd core‐shell nanocrystals display excellent electrocatalytic activities for formic acid oxidation, which may be due to high Pd utilization derived from the formation of Ag@Pd core‐shell nanostructure and the strong interaction between Ag and Pd.     

Chiral Metal–Organic Framework Hollow Nanospheres for High‐Efficiency Enantiomer Separation

Chiral ZIF‐8 hollow nanospheres with d ‐histidine as part of chiral ligands (denoted as H‐d ‐his‐ZIF‐8) were prepared for separation of (±)‐amine acids. Compared to bulk d ‐his‐ZIF‐8 without a hollow cavity, the prepared H‐d ‐his‐ZIF‐8 showed 15 times higher separation capacity and higher ee values of 90.5 % for alanine, 95.2 % for glutamic acid and 92.6 % for lysine, respectively.     

Diblock copolymers of polystyrene‐b‐poly(1,3‐cyclohexadiene) exhibiting unique three‐phase microdomain morphologies

The synthesis and molecular characterization of a series of conformationally asymmetric polystyrene‐block‐poly(1,3‐cyclohexadiene) (PS‐b‐PCHD) diblock copolymers (PCHD: ～90% 1,4 and ～10% 1,2), by sequential anionic copolymerization high vacuum techniques, is reported. A wide range of volume fractions (0.27 ≤ ?_PS ≤ 0.91) was studied by transmission electron microscopy and small‐angle X‐ray scattering in order to explore in detail the microphase separation behavior of these flexible/semiflexible diblock copolymers. Unusual morphologies, consisting of PCHD core(PCHD‐1,4)–shell(PCHD‐1,2) cylinders in PS matrix and three‐phase (PS, PCHD‐1,4, PCHD‐1,2) four‐layer lamellae, were observed suggesting that the chain stiffness of the PCHD block and the strong dependence of the interaction parameter χ on the PCHD microstructures are important factors for the formation of this unusual microphase separation behavior in PS‐b‐PCHD diblock copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1564–1572     

Zwitterionic Iron Oxide (γ‐Fe2O3) Nanoparticles Based on P(2VP‐grad‐AA) Copolymers

This study presents the synthesis and characterization of zwitterionic core–shell hybrid nanoparticles consisting of a core of iron oxide multicore nanoparticles (MCNPs, γ‐Fe₂O₃) and a shell of sultonated poly(2‐vinylpyridine‐grad‐acrylic acid) copolymers. The gradient copolymers are prepared by reversible addition fragmentation chain transfer polymerization of 2‐vinylpyridine (2VP), followed by the addition of tert‐butyl acrylate and subsequent hydrolysis. Grafting of P(2VP‐grad‐AA) onto MCNP results in P(2VP‐grad‐AA)@MCNP, followed by quaternization using 1,3‐propanesultone—leading to P(2VP_S‐grad‐AA)@MCNP with a zwitterionic shell. The resulting particles are characterized by transmission electron microscopy, dynamic light scattering, and thermogravimetric analysis measurements, showing particle diameters of ≈70–90 nm and an overall content of the copolymer shell of ≈10%. Turbidity measurements indicate increased stability toward secondary aggregation after coating if compared to the pristine MCNP and additional cytotoxicity tests do not reveal any significant influence on cell viability.