静电纺丝技术制备Gd_3Ga_5O_(12)∶Eu~(3+)多孔发光纳米带

采用静电纺丝技术制备了PVP/[Gd(NO3)3+Ga(NO3)3+Eu(NO3)3]复合纳米带,将其进行热处理,得到了Gd3Ga5O12∶Eu3+(简称GGG∶Eu3+)多孔发光纳米带.采用XRD,SEM,TEM,TG-DTA,FTIR和荧光光谱等技术对样品进行了表征.PVP/[Gd(NO3)3+Ga(NO3)3+Eu(NO3)3]复合纳米带为非晶态,经800℃焙烧8h后,获得了单相石榴石型的GGG∶Eu3+纳米带,属于立方晶系,空间群为Ia3d.复合纳米带表面光滑,尺寸均一,平均宽度约10μm,厚度约为100nm,彼此没有交联;经800℃焙烧后GGG∶Eu3+多孔纳米带平均宽度约2.5μm,厚度30nm,长度大于500μm,呈多孔网状多晶结构.当焙烧温度高于700℃时,复合纳米带中DMF、有机物和硝酸盐分解挥发完全,总失重率为93.1%.焙烧温度为800℃时,生成了纯净的无机氧化物.在254nm的紫外光激发下,GGG∶Eu3+纳米带发射出主峰位于591nm的明亮红光,属于Eu3+的5D0→7F1跃迁.对GGG∶Eu3+纳米带形成机理进行了讨论.     

静电纺丝技术制备Gd3Ga5O12:Eu3+多孔发光纳米带

采用静电纺丝技术制备了PVP/[Gd(NO3)3+Ga(NO3)3+Eu(NO3)3]复合纳米带,将其进行热处理,得到了Gd3Ga5O12:Eu3+(简称GGG:Eu3+)多孔发光纳米带.采用XRD,SEM,TEM,TG-DTA,FTIR和荧光光谱等技术对样品进行了表征.PVP/[Gd(NO3)3+Ga(NO3)3+Eu(NO3)3]复合纳米带为非晶态,经800 ℃焙烧8 h后,获得了单相石榴石型的GGG:Eu3+纳米带,属于立方晶系,空间群为Ia3d.复合纳米带表面光滑,尺寸均一,平均宽度约10 μm,厚度约为100 nm,彼此没有交联;经800 ℃焙烧后GGG:Eu3+多孔纳米带平均宽度约2.5 μm,厚度30 nm,长度大于500 μm,呈多孔网状多晶结构.当焙烧温度高于700 ℃时,复合纳米带中DMF、有机物和硝酸盐分解挥发完全,总失重率为93.1%.焙烧温度为800 ℃时,生成了纯净的无机氧化物.在254 nm的紫外光激发下,GGG:Eu3+纳米带发射出主峰位于591 nm的明亮红光,属于Eu3+的 5D0→7F1跃迁.对GGG:Eu3+纳米带形成机理进行了讨论.     

静电纺丝技术制备Y_2O_3∶Yb~(3+),Er~(3+)上转换纳米纤维及其表征

采用静电纺丝技术制备了PVA/[Y(NO3)3+Yb(NO3)3+Er(NO3)3]复合纳米纤维,将其在适当的温度下进行热处理,得到Y2O3∶Yb3+,Er3+上转换纳米纤维.XRD分析表明,复合纳米纤维为无定形,Y2O3∶Yb3+,Er3+上转换纳米纤维属于体心立方晶系,空间群为Ia3.SEM分析表明,复合纳米纤维的平均直径约为150nm;随着焙烧温度的升高,纤维直径逐渐减小.经过600℃焙烧后,获得了直径约60nm的Y2O3∶Yb3+,Er3+上转换纳米纤维.TG-DTA分析表明,当焙烧温度高于600℃时,复合纳米纤维中水分、有机物和硝酸盐分解挥发完毕,样品不再失重,总失重率为83%.FTIR分析表明,复合纳米纤维与纯PVA的红外光谱一致,当焙烧温度高于600℃时,生成了Y2O3∶Yb3+,Er3+上转换纳米纤维.该纤维在980nm的半导体激光器激发下发射出中心波长为521,562nm的绿色和656nm的红色上转换荧光,分别对应于Er3+离子的2H11/2/4S3/2→4Il5/2跃迁和4F9/2→4Il5/2跃迁.对Y2O3∶Yb3+,Er3+上转换纳米纤维的形成机理进行了讨论.     

静电纺丝法制备Y2O3纳米纤维与表征

采用静电纺丝法制备了PVA/Y(NO3)3复合纳米纤维,在适当的温度下进行热处理,得到Y2O3纳米纤维. 利用XRD,SEM,TG-DTA,FTIR等现代分析手段对样品进行了表征. XRD分析表明,PVA/Y(NO3)3复合纤维为无定型,焙烧温度在600 ℃以上得到晶态单相的Y2O3纳米纤维,属于立方晶系,空间群为Ia3. SEM分析表明,PVA/Y(NO3)3复合纤维表面光滑,平均直径为110 nm. 焙烧温度对Y2O3纳米纤维的形成有重要影响. 600 ℃焙烧得到的Y2O3纳米纤维的平均直径约50 nm,900 ℃焙烧得到的Y2O3纳米纤维由纳米颗粒堆积而成,部分已断裂. TG-DTA和FTIR分析表明,PVA,Y(NO3)3以及水分在600 ℃以上时完全分解挥发,最终样品为晶态单相的Y2O3纳米纤维.     

静电纺丝技术制备Y2O3∶Eu3+纳米带及其发光性质

采用静电纺丝技术制备了PVP/[Y(NO₃)₃+Eu(NO₃)₃]复合纳米带,将其进行热处理,获得了Y₂O₃∶Eu³⁺纳米带。采用XRD、FTIR、SEM、TEM、荧光光谱等技术对焙烧后的样品进行了表征。结果表明：600 ℃焙烧即可获得Y₂O₃∶Eu³⁺纳米带,800 ℃时结晶更为良好,产物属于立方晶系。纳米带表面光滑,由平均直径为30 nm的小颗粒紧密排列而成,为多晶结构。随着温度升高,纳米带宽度减小。焙烧800 ℃获得的Y₂O₃∶Eu³⁺纳米带的发光性质优于焙烧600 ℃的Y₂O₃∶Eu³⁺纳米带。与体材料相比,该纳米带的激发光谱Eu³⁺-O^2-电荷迁移态(CTB)发生红移,发射光谱发生蓝移。     

核壳型Gd2O3:Eu3+@Y2O3纳米发光材料的制备与发光性能

采用均相沉淀法制备了均匀球形的Gd2O3:Eu3+@Y2O3核壳结构纳米发光材料.XRD结果表明经过800℃焙烧后样品为立方晶系的Gd2O3,并且晶体发育良好,包覆Y2O3之后Gd2O3的衍射峰位置无明显变化,但随着包覆厚度的增加,出现了立方晶系Y2O3的衍射峰.FTIR谱图观测到了Gd-O,Y-O伸缩振动吸收峰,随着包覆厚度的减少吸收峰增强,认为当包覆层的厚度适当时,颗粒表面的悬空键(断键)变少,Gd(Eu,Y)-O键增多所致.SEM表明包覆前后样品为均匀分散的球形结构.XPS分析进一步证明了表面包覆上了Y2O3.荧光光谱表明:纳米Gd2O3:Eu3+表面包覆不同厚度的基质Y2O3后,均观测到Eu3+离子的特征红光发射,当包覆厚度R=4:1时的发光强度比未包覆的Gd2O3:Eu3+增强,认为核-壳型样品降低了纳米Gd2O3:Eu3+的表面效应给发光强度带来的负面影响.     

静电纺丝技术制备LaCrO4和LaCrO3纳米带及其光催化性质

采用溶胶-凝胶法结合静电纺丝技术制备了PVP/[La(NO3)3|Cr(NO3)3]复合纳米带, 经热处理后得到LaCrO4纳米带和LaCrO3纳米带. 采用TG-DTA, XRD, SEM和EDS等测试手段对样品进行了表征. 结果表明, PVP/[La(NO3)3-Cr(NO3)3]复合纳米带表面光滑, 宽度为(9.1±1.9) μm, 厚度约385 nm; 经600 ℃焙烧后得到单斜独居石型LaCrO4纳米带, 宽度为(2.5±0.5) μm, 厚度约100 nm; 当焙烧温度为650~800 ℃时得到LaCrO3多孔纳米带, 属正交晶系, Pbnm空间群, 经650 ℃焙烧后得到的LaCrO3纳米带呈多孔结构, 带宽为(2.4±0.5) μm, 厚度约90 nm; 经800 ℃焙烧后得到的LaCrO3纳米带部分破碎形成LaCrO3纳米粒子, LaCrO3纳米带宽度约(1.3±0.4) μm, 厚度约90 nm, LaCrO3纳米粒子粒径约80 nm. 以罗丹明B为目标降解物, 研究了不同焙烧温度下产物的光催化性能, 其中800 ℃焙烧后得到的样品在紫外光照射下对罗丹明B的降解效果最好, 光照200 min后罗丹明B的降解率为94.6%.     

Y2O3:Eu3+纳米线阵列的制备与表征

Y2O3:Eu3+红色荧光粉由于色纯度高、化学性质稳定和量子效率接近100%而广泛用于荧光灯和投影电视等方面.近年来,Y2O3:Eu3+的大量研究工作主要集中于纳米粉末的制备方法及其与体相材料不同的发光特性[1～3].最近,有关Y2O3:Eu3+及其稀土化合物的纳米管、纳米线和纳米带一维材料的制备成为研究热点.Wu Changfeng等[4,5]利用表面活性剂合成了Y2O3 : Eu3+纳米管.激光格位选择激发测试结果表明,Eu3+在纳米管中占据3个不同的格位,其611 nm处的红色发光峰出现了宽化.He Yu等[6]采用水热法及退火处理制备出了Y2O3:Eu3+纳米带,发现Eu3+的发射峰不仅宽化,而且出现了625 nm的新峰.Li Yadong等[7～9]采用水热法制备了稀土氧化物、硫氧化物和氢氧化物等的纳米线和纳米管,并探索了其形成机理,同时发现Y2O3S : yb3+,Er3+具有上转换的性质.     

纳米晶Y_2O_3∶Eu~(3+)的合成及其热分析动力学

以Y(NO3)3、Eu2O3、CO(NH2)2为原料,使用超声波作用下的均匀沉淀法合成了纳米晶荧光粉Y2O3∶Eu3+。利用不同升温速率的热重及差热分析研究了纳米晶Y2O3∶Eu3+的合成动力学及晶粒生长动力学。研究表明,纳米晶Y2O3∶Eu3+的前驱体分解过程可分为3个步骤,利用Doyle-Ozawa法和Kissinger法分别计算了各个反应阶段的表观活化能,用Kissinger法确定每个反应阶段的反应级数和频率因子,并给出了各个阶段的动力学方程。根据晶粒生长动力学理论计算纳米荧光粉Y2O3∶Eu3+晶粒生长活化能为17.80kJ·mol-1,表明热处理过程中纳米晶粒的长大为扩散生长机制。     

CeO_2:Eu~(3+)纳米晶的水热合成和光学性能

以硝酸铈(Ce(NO3)3·6H2O)、硝酸铕(Eu(NO3)3·6H2O)、氨水(NH3·H2O)为原料和十六烷基三甲基溴化铵(CTAB)为分散剂,采用水热法制备了CeO2:Eu3+纳米晶,用X射线衍射(XRD)、X射线光电子能谱分析(XPS)、透射电镜(TEM)、傅立叶红外(FT-IR)、拉曼光谱和荧光(FL)等手段对产品的结构和光学性能进行分析和表征。测试结果表明:CeO2:Eu3+是立方萤石结构的纳米晶体,铕以Eu3+形式进入CeO2晶格中致使其晶胞参数略增,晶粒尺寸减小。相比纯CeO2,CeO2:Eu3+的紫外-可见光吸收边发生些许红移,其中CeO2:Eu3+(9.0%)纳米晶的能带隙为2.84 e V。CeO2:Eu3+纳米晶在593,612和632 nm处发橙红光,其中非直接激发(356 nm)的CeO2:Eu3+(1.0%)的磁偶极跃迁(5D0→7F1)占主导,而直接激发(468 nm)的CeO2:Eu3+(5.0%)的电偶极跃迁(5D0→7F2)强度更大,两者均随焙烧温度升高而增强。     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.