Tetrahalidometallate(II) Ionic Liquids with More than One Metal: The Effect of Bromide versus Chloride

Fifteen N-butylpyridinium salts – five monometallic [C₄Py]₂[MBr₄] and ten bimetallic [C₄Py]₂[M_0.5^aM_0.5^bBr₄] (M=Co, Cu, Mn, Ni, Zn) – were synthesized, and their structures and thermal and electrochemical properties were studied. All the compounds are ionic liquids (ILs) with melting points between 64 and 101 °C. Powder and single-crystal X-ray diffraction show that all ILs are isostructural. The electrochemical stability windows of the ILs are between 2 and 3 V. The conductivities at room temperature are between 10⁻⁵ and 10⁻⁶ S cm⁻¹. At elevated temperatures, the conductivities reach up to 10⁻⁴ S cm⁻¹ at 70 °C. The structures and properties of the current bromide-based ILs were also compared with those of previous examples using chloride ligands, which illustrated differences and similarities between the two groups of ILs.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

n-Butane,iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n-butane, iso-butane and 1-butene on a set of frozen 1-alkyl-3-methylimidazolium-based ILs [C_nC₁Im]X, where n=4, 8 and X⁻=Cl⁻, Br⁻, [PF₆]⁻ and [Tf₂N]⁻. The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n-butane>1-butene>iso-butane, which can be explained by different dispersion interactions.     

Pseudohalogen Chemistry in Ionic Liquids with Non-innocent Cations and Anions

Within the second funding period of the SPP 1708 “Material Synthesis near Room Temperature”,which started in 2017, we were able to synthesize novel anionic species utilizing Ionic Liquids (ILs) both, as reaction media and reactant. ILs, bearing the decomposable and non-innocent methyl carbonate anion [CO₃Me]⁻, served as starting material and enabled facile access to pseudohalide salts by reaction with Me₃Si−X (X=CN, N₃, OCN, SCN). Starting with the synthesized Room temperature Ionic Liquid (RT-IL) [nBu₃MeN][B(OMe)₃(CN)], we were able to crystallize the double salt [nBu₃MeN]₂[B(OMe)₃(CN)](CN). Furthermore, we studied the reaction of [WCC]SCN and [WCC]CN (WCC=weakly coordinating cation) with their corresponding protic acids HX (X=SCN, CN), which resulted in formation of [H(NCS)₂]⁻ and the temperature labile solvate anions [CN(HCN)_n]⁻ (n=2, 3). In addition, the highly labile anionic HCN solvates were obtained from [PPN]X ([PPN]=μ-nitridobis(triphenylphosphonium), X=N₃, OCN, SCN and OCP) and HCN. Crystals of [PPN][X(HCN)₃] (X=N₃, OCN) and [PPN][SCN(HCN)₂] were obtained when the crystallization was carried out at low temperatures. Interestingly, reaction of [PPN]OCP with HCN was noticed, which led to the formation of [P(CN)₂]⁻, crystallizing as HCN disolvate [PPN][P(CN⋅HCN)₂]. Furthermore, we were able to isolate the novel cyanido(halido) silicate dianions of the type [SiCl_0.78(CN)_5.22]²⁻ and [SiF(CN)₅]²⁻ and the hexa-substituted [Si(CN)₆]²⁻ by temperature controlled halide/cyanide exchange reactions. By facile neutralization reactions with the non-innocent cation of [Et₃HN]₂[Si(CN)₆] with MOH (M=Li, K), Li₂[Si(CN)₆] ⋅ 2 H₂O and K₂[Si(CN)₆] were obtained, which form three dimensional coordination polymers. From salt metathesis processes of M₂[Si(CN)₆] with different imidazolium bromides, we were able to isolate new imidazolium salts and the ionic liquid [BMIm]₂[Si(CN)₆]. When reacting [Mes(nBu)Im]₂[Si(CN)₆] with an excess of the strong Lewis acid B(C₆F₅)₃, the voluminous adduct anion {Si[CN⋅B(C₆F₅)₃]₆}²⁻ was obtained.     

Tetrahydrothiophene-Based Ionic Liquids: Synthesis and Thermodynamic Characterizations

S-alkyltetrahydrothiophenium, [C_nTHT]⁺ bis(trifluorosulfonyl)imide, [NTf₂]⁻ room temperature ionic liquids (ILs) and tetraphenylborate, [BPh₄]⁻ salts with alkyl chain lengths from C₄ to C₁₀ have been prepared. The ILs and salts were characterized and their purity verified by ¹H- and ¹³C-nuclear magnetic resonance, elemental analysis, ion chromatography, Karl-Fischer titration, single crystal X-ray diffraction as well as thermogravimetric analysis. The experimentally determined density and viscosity decrease with increasing temperature. The experimental solubility of the [C_nTHT][NTf₂]-ILs in water (75 to 2.2 mg/L for C₄ to C₁₀) was modelled with very good agreement by Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT), based on the extremely low vapor pressures for the [C_nTHT][NTf₂]-ILs measured in this work (4.15 to 0.037 ⋅ 10⁻⁷×p_sat for C₄ to C₁₀). PC-SAFT is able to predict and correlate different thermodynamic properties by estimating the Helmholtz residual energy.     

Conductivity and Redox Potentials of Ionic Liquid Trihalogen Monoanions [X3]−, [XY2]−, and [BrF4]− (X=Cl,Br, I and Y=Cl,Br)

The ionic liquid (IL) trihalogen monoanions [N₂₂₂₁][X₃]⁻ and [N₂₂₂₁][XY₂]⁻ ([N₂₂₂₁]⁺=triethylmethylammonium, X=Cl, Br, I, Y=Cl, Br) were investigated electrochemically via temperature dependent conductance and cyclic voltammetry (CV) measurements. The polyhalogen monoanions were measured both as neat salts and as double salts in 1-butyl-1-methyl-pyrrolidinium trifluoromethane-sulfonate ([BMP][OTf], [X₃]⁻/[XY₂]⁻ 0.5 M). Lighter IL trihalogen monoanions displayed higher conductivities than their heavier homologues, with [Cl₃]⁻ being 1.1 and 3.7 times greater than [Br₃]⁻ and [I₃]⁻, respectively. The addition of [BMP][OTf] reduced the conductivity significantly. Within the group of polyhalogen monoanions, the oxidation potential develops in the series [Cl₃]⁻>[BrCl₂]⁻>[Br₃]⁻>[IBr₂]⁻>[ICl₂]⁻>[I₃]⁻. The redox potential of the interhalogen monoanions was found to be primarily determined by the central halogen, I in [ICl₂]⁻ and [IBr₂]⁻_, and Br in [BrCl₂]⁻. Additionally, tetrafluorobromate(III) ([N₂₂₂₁]⁺[BrF₄]⁻) was analyzed via CV in MeCN at 0 °C, yielding a single reversible redox process ([BrF₂]⁻/[BrF₄]⁻).     

Water‐Free Rare‐Earth‐Metal Ionic Liquids/Ionic Liquid Crystals Based on Hexanitratolanthanate(III) Anion

The hexanitratolanthanate anion (La(NO₃)₆^3?) is an interesting symmetric anion suitable to construct the component of water‐free rare‐earth‐metal ionic liquids. The syntheses and structural characterization of eleven lanthanum nitrate complexes, [C_nmim]₃[La(NO₃)₆] (n=1, 2, 4, 6, 8, 12, 14, 16, 18), including 1,3‐dimethylimidazolium hexanitratolanthanate ([C₁mim]₃[La(NO₃)₆], 1 ), 1‐ethyl‐3‐methylimidazolium hexanitratolanthanate ([C₂mim]₃[La(NO₃)₆], 2 ), 1‐butyl‐3‐methylimidazolium hexanitratolanthanate ([C₄mim]₃[La(NO₃)₆], 3 ), 1‐isobutyl‐3‐methylimidazolium hexanetratolanthanate ([isoC₄mim]₃[La(NO₃)₆], 4 ), 1‐methyl‐3‐(3′‐methylbutyl)imidazolium hexanitratolanthanate ([MC₄mim]₃[La(NO₃)₆], 5 ), 1‐hexyl‐3‐methylimidazolium hexanitratolanthanate ([C₆mim]₃[La(NO₃)₆], 6 ), 1‐methyl‐3‐octylimidazolium hexanitratolanthanate ([C₈mim]₃[La(NO₃)₆], 7 ), 1‐dodecyl‐3‐methylimidazolium hexanitratolanthanate ([C₁₂mim]₃[La(NO₃)₆], 8 ), 1‐methyl‐3‐tetradecylimidazolium hexanitratolanthanate ([C₁₄mim]₃[La‐(NO₃)₆], 9 ), 1‐hexadecyl‐3‐methylimid‐azolium hexanitratolanthanum ([C₁₆dmim]₃[La(NO₃)₆], 10 ), and 1‐methyl‐3‐octadecylimidazolium hexanitratolanthanate ([C₁₈mim]₃[La(NO₃)₆], 11 ) are reported. All new compounds were characterized by ¹H and ¹³C NMR, and IR spectroscopy as well as elemental analysis. The crystal structure of compound 1 was determined by using single‐crystal X‐ray diffraction, giving the following crystallographic information: monoclinic; P2₁/c; a=15.3170 (3), b=14.2340 (2), c=13.8954(2) Å; β=94.3453(15)°, V=3020.80(9) ų, Z=4, ρ=1.764 g cm^?3. The coordination polyhedron around the lanthanum ion is rationalized by six nitrate anions with twelve oxygen atoms. No hydrogen‐bonding network or water molecule was found in 1 . The thermodynamic stability of the new complexes was investigated by using thermogravimetric analysis (TGA). The water‐free hexanitratolanthanate ionic liquids are thermal and moisture stable. Four complexes, namely complexes 8 – 11 , were found to be ionic liquid crystals by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). They all present smectic A liquid‐crystalline phase.     

Low Temperature Activation of Tellurium and Resource-Efficient Synthesis of AuTe2 and Ag2Te in Ionic Liquids

The low temperature syntheses of AuTe₂ and Ag₂Te starting from the elements were investigated in the ionic liquids (ILs) [BMIm]X and [P₆₆₆₁₄]Z ([BMIm]⁺=1-butyl-3-methylimidazolium; X = Cl, [HSO₄]⁻, [P₆₆₆₁₄]⁺ = trihexyltetradecylphosphonium; Z = Cl⁻, Br⁻, dicyanamide [DCA]⁻, bis(trifluoromethylsulfonyl)imide [NTf₂]⁻, decanoate [dec]⁻, acetate [OAc]⁻, bis(2,4,4-trimethylpentyl)phosphinate [BTMP]⁻). Powder X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy revealed that [P₆₆₆₁₄]Cl is the most promising candidate for the single phase synthesis of AuTe₂ at 200 °C. Ag₂Te was obtained using the same ILs by reducing the temperature in the flask to 60 °C. Even at room temperature, quantitative yield was achieved by using either 2 mol % of [P₆₆₆₁₄]Cl in dichloromethane or a planetary ball mill. Diffusion experiments, ³¹P and ¹²⁵Te-NMR, and mass spectroscopy revealed one of the reaction mechanisms at 60 °C. Catalytic amounts of alkylphosphanes in commercial [P₆₆₆₁₄]Cl activate tellurium and form soluble phosphane tellurides, which react on the metal surface to solid telluride and the initial phosphane. In addition, a convenient method for the purification of [P₆₆₆₁₄]Cl was developed.     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Tracking the Micro-Heterogeneity and Hydrogen-Bonding Interactions in Hydroxyl-Functionalized Ionic Liquid Solutions: A Combined Experimental and Computational Study

Ionic liquids (ILs) are an important class of media that are usually used in combination with polar solvents to reduce costs and tune their physicochemical properties. In this regard, it is essential to understand the influence of adding solvents on the properties of ILs. In this work, the micro-heterogeneity and H-bonding interactions between a hydroxyl-functionalized IL, [HOEmim][TFSI], and acetonitrile (ACN) were investigated by attenuated total reflection Fourier transform infrared spectroscopy and molecular simulations. All studied IL-ACN mixtures were found to deviate from the ideal mixtures. The degree of deviations reaches the maximum at about x(ACN)=0.7 with the presence of both homogeneous clusters of pure IL/ACN and heterogeneous clusters of IL-ACN. With the addition of ACN to IL, the mixtures undergo the transformation from “ACN solvated in [HOEmim][TFSI]” to “[HOEmim][TFSI] solvated in ACN”. It is found that the newly formed H-bonding interactions between the IL and ACN is the main factor that contributes to the red shifts of O−H, C₂−H, C_4,5−H, and C_alkyl−H of [HOEmim]⁺ cation, and the blue shifts of C−D, C≡N of ACN, and C−F, S=O of [TFSI]⁻ anion. These in-depth studies on the mixtures of hydroxyl-functionalized IL and acetonitrile would help to understand the micro-heterogeneity and H-bonding interactions of miscible solutions and shed light on exploring their applications.     

Metal Assisted Synthesis of Cationic Sulfidobismuth Cubanes in Ionic Liquids

Bi₂S₃ was dissolved in the presence of either AuCl/PtCl₂ or AgCl in the ionic liquids [BMIm]Cl ⋅ xAlCl₃ (BMIm=1-n-butyl-3-methylimidazolium; x=4–4.3) through annealing the mixtures at 180 or 200 °C. Upon cooling to room temperature, orange, air-sensitive crystals of [BMIm](Bi₄S₄)[AlCl₄]₅ ( 1 ) or Ag(Bi₇S₈)[S(AlCl₃)₃]₂[AlCl₄]₂ ( 2 ) precipitated, respectively. 1 did not form in the absence of AuCl/PtCl₂, suggesting an essential role of the metal cations. X-ray diffraction on single-crystals of 1 revealed a monoclinic crystal structure that contains (Bi₄S₄)⁴⁺ heterocubanes and [AlCl₄]⁻ tetrahedra as well as [BMIm]⁺ cations. The intercalation of the ionic liquid was confirmed via solid state NMR spectroscopy, revealing unusual coupling behavior. The crystal structure of 2 consists of (Bi₇S₈)⁵⁺ spiro-dicubanes, [S(AlCl₃)₃]²⁻ tetrahedra triples, isolated [AlCl₄]⁻ tetrahedra, and heavily disordered silver(I) cations. No cation ordering took place in 2 upon slow cooling to 100 K.     

Halide-Free Synthesis of New Difluoro(oxalato)borate [DFOB]−-Based Ionic Liquids and Organic Ionic Plastic Crystals

The implementation of next-generation batteries requires the development of safe, compatible electrolytes that are stable and do not cause safety problems. The difluoro(oxalato)borate ([DFOB]⁻) anion has been used as an electrolyte additive to aid with stability, but such an approach has most commonly been carried out using flammable solvent electrolytes. As an alternative approach, utilisation of the [DFOB]⁻ anion to make ionic liquids (ILs) or Organic Ionic Plastic Crystals (OIPCs) allows the advantageous properties of ILs or OIPCs, such as higher thermal stability and non-volatility, combined with the benefits of the [DFOB]⁻ anion. Here, we report the synthesis of new [DFOB]⁻-based ILs paired with triethylmethylphosphonium [P₁₂₂₂]⁺, and diethylisobutylmethylphosphonium [P_122i4]⁺. We also report the first OIPCs containing the [DFOB]⁻ anion, formed by combination with the 1-ethyl-1-methylpyrrolidinium [C₂mpyr]⁺ cation, and the triethylmethylammonium [N₁₂₂₂]⁺ cation. The traditional synthetic route using halide starting materials has been successfully replaced by a halide-free tosylate-based synthetic route that is advantageous for a purer, halide free product. The synthesised [DFOB]⁻-based salts exhibit good thermal stability, while the ILs display relatively high ionic conductivity. Thus, the new [DFOB]⁻-based electrolytes show promise for further investigation as battery electrolytes both in liquid and solid-state form.     

Adsorption and Purification of Baicalin from Scutellaria baicalensis Georgi Extract by Ionic Liquids (ILs) Grafted Silica

Baicalin which has multiple biological activities is the main active component of the root of Scutellaria baicalensis Georgi (SBG). Although its isolation and purification by adsorption methods have aroused much interest of the scientific community, it suffered from the poor selectivity of the adsorbents. In this work, an environmentally benign method was developed to prepare ionic liquids (ILs) grafted silica by using IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim]NTf₂) and ethanol as reaction media. The IL 1-propyl-3-methylimidazolium chloride ([C₃mim]Cl) grafted silica ([C₃mim]⁺Cl⁻@SiO₂) was used to adsorb and purify baicalin from the root extract of Scutellaria baicalensis Georgi (SBG). Experimental results indicated that the adsorption equilibrium can be quickly achieved (within 10 min). The adsorption behavior of [C₃mim]⁺Cl⁻@SiO₂ for baicalin was in good agreement with Langmuir and Freundlich models and the adsorption was a physisorption process as suggested by Dubinin–Radushkevich model. Compared with commercial resins, [C₃mim]⁺Cl⁻@SiO₂ showed the strongest adsorption ability and highest selectivity. After desorption and crystallization, a purity of baicalin as high as 96.5% could be obtained. These results indicated that the ILs grafted silica materials were promising adsorbents for the adsorption and purification of baicalin and showed huge potential in the purification of other bioactive compounds from natural sources.     

Visible-to-UV Photon Upconversion in Nanostructured Chromophoric Ionic Liquids

Visible-to-ultraviolet (vis-to-UV) triplet-triplet annihilation based photon upconversion (TTA-UC) is achieved in a non-volatile chromophoric ionic liquid (IL) for the first time. A novel IL is synthesized by combining UV-emitting anion 4-(2-phenyloxazol-5-yl)benzenesulfonate (PPOS) and trihexyltetradecylphosphonium cation (P₆₆₆₁₄). The nanostructured organization of chromophoric anions is demonstrated by synchrotron X-ray and optical measurements. When the IL is doped with a triplet sensitizer tris(2-phenylpyridinato)iridium(III) (Ir(ppy)₃), the visible-to-UV TTA-UC with a relatively low threshold excitation intensity of 61 mW cm⁻² is achieved. This is due to a large triplet diffusion coefficient in the IL (1.4×10⁻⁷ cm² s⁻¹) as well as a high absorption coefficient 15 cm⁻¹ and a long PPOS triplet lifetime of 1.55 ms, all implemented in the condensed IL system. This work demonstrates the unique potential of ILs to control chromophore arrangements for desired functions.     

Tetrabutylammonium Salts of Aluminum(III) and Gallium(III) Phthalocyanine Radical Anions Bonded with Fluoren‐9‐olato− Anions and Indium(III) Phthalocyanine Bromide Radical Anions

Reduction of aluminum(III), gallium(III), and indium(III) phthalocyanine chlorides by sodium fluorenone ketyl in the presence of tetrabutylammonium cations yielded crystalline salts of the type (Bu₄N⁺)₂[M^III(HFl−O⁻)(Pc^.3−)]^.−(Br⁻) ⋅ 1.5 C₆H₄Cl₂ [M=Al ( 1 ), Ga ( 2 ); HFl−O⁻=fluoren‐9‐olato⁻ anion; Pc=phthalocyanine] and (Bu₄N⁺) [In^IIIBr(Pc^.3−)]^.− ⋅ 0.875 C₆H₄Cl₂ ⋅ 0.125 C₆H₁₄ ( 3 ). The salts were found to contain Pc^.3− radical anions with negatively charged phthalocyanine macrocycles, as evidenced by the presence of intense bands of Pc^.3− in the near‐IR region and a noticeable blueshift in both the Q and Soret bands of phthalocyanine. The metal(III) atoms coordinate HFl−O⁻ anions in 1 and 2 with short Al−O and Ga−O bond lengths of 1.749(2) and 1.836(6) Å, respectively. The C−O bonds [1.402(3) and 1.391(11) Å in 1 and 2 , respectively] in the HFl−O⁻ anions are longer than the same bond in the fluorenone ketyl (1.27–1.31 Å). Salts 1 – 3 show effective magnetic moments of 1.72, 1.66, and 1.79 μ_B at 300 K, respectively, owing to the presence of unpaired S= 1/2 spins on Pc^.3−. These spins are coupled antiferromagnetically with Weiss temperatures of −22, −14, and −30 K for 1 – 3 , respectively. Coupling can occur in the corrugated two‐dimensional phthalocyanine layers of 1 and 2 with an exchange interaction of J /k _B=−0.9 and −1.1 K, respectively, and in the π‐stacking {[In^IIIBr(Pc^.3−)]^.−}₂ dimers of 3 with an exchange interaction of J /k _B=−10.8 K. The salts show intense electron paramagnetic resonance (EPR) signals attributed to Pc^.3−. It was found that increasing the size of the central metal atom strongly broadened these EPR signals.     

Lanthanoid‐Based Ionic Liquids Incorporating the Dicyanonitrosomethanide Anion

A series of low‐melting‐point salts with hexakisdicyanonitrosomethanidolanthanoidate anions has been synthesised and characterised: (C₂mim)₃[Ln(dcnm)₆] ( 1 Ln ; 1 Ln = 1 La , 1 Ce , 1 Pr , 1 Nd ), (C₂C₁mim)₃[Pr(dcnm)₆] ( 2 Pr ), (C₄C₁pyr)₃[Ce(dcnm)₆] ( 3 Ce ), (N₁₁₁₄)₃[Ln(dcnm)₆] ( 4 Ln ; 4 Ln = 4 La , 4 Ce , 4 Pr , 4 Nd , 4 Sm , 4 Gd ), and (N_1112OH)₃[Ce(dcnm)₆] ( 5 Ce ) (C₂mim=1‐ethyl‐3‐methylimidazolium, C₂C₁mim=1‐ethyl‐2,3‐dimethylimidazolium, C₄C₁py=N‐butyl‐4‐methylpyridinium, N₁₁₁₄=butyltrimethylammonium, N_1112OH=2‐(hydroxyethyl)trimethylammonium=choline). X‐ray crystallography was used to determine the structures of complexes 1 La , 2 Pr , and 5 Ce , all of which contain [Ln(dcnm)₆]^3? ions. Complexes 1 Ln and 2 Pr were all ionic liquids (ILs), with complex 3 Ce melting at 38.1 °C, the lowest melting point of any known complex containing the [Ln(dcnm)₆]^3? trianion. The ammonium‐based cations proved to be less suitable for forming ILs, with complexes 4 Sm and 4 Gd being the only salts with the N₁₁₁₄ cation to have melting points below 100 °C. The choline‐containing complex 5 Ce did not melt up to 160 °C, with the increase in melting point possibly being due to extensive hydrogen bonding, which could be inferred from the crystal structure of the complex.     

Absolute Brønsted Acidities and pH Scales in Ionic Liquids

Although receiving large interest over the last years, some fundamental aspects of Brønsted acidity in ionic liquids (ILs) have up to now been insufficiently highlighted. In this work, standard states, activity, and activity coefficient definitions for IL solvent systems were developed from general thermodynamic considerations and then extended to a general mixed solvent standard state. By using the bromide/bromoaluminate systems as representative ILs, formulae for thermodynamically consistent pH scales for ILs with simple (Br^?) and complex ([Al_nBr_3n+1]^?) anions were derived on the basis of the chemical potential of the proton. Supported by quantum chemical [ccsd(t)/MP2/DFT/COSMO‐RS] calculations, Gibbs solvation energies of the proton were calculated, which allowed the ILs to be ranked in absolute acidity, that is, pH_abs or μ_abs(H⁺, IL), and additionally allowed their acidity to be compared with molecular Brønsted acid systems. It was shown that bromoaluminate ILs are suited for reaching superacidic conditions. The complexity of autoprotolysis processes in C₆MIM⁺[AlBr₄]^? (C₆MIM=1‐hexyl‐3‐methylimidazolium) with or without the addition of basic (i.e. Br^?) or acidic (AlBr₃ and/or HBr) solutes was examined in detail by model calculations, and they indicated a large thermodynamic influence of small deviations from the exact stoichiometric composition.     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Raman Spectroscopic Study on Alkyl Chain Conformation in 1‐Butyl‐3‐methylimidazolium Ionic Liquids and their Aqueous Mixtures

Ionic liquids of 1‐butyl‐3‐methylimidazolium ([BMIM]) cation with different anions (Cl^?, Br^?, I^?, and BF₄^?), and their aqueous mixtures were investigated by using Raman spectroscopy and dispersion‐included density functional theory (DFT). The characteristic Raman bands at 600 and 624 cm^?1 for two isomers of the butyl chain in the imidazolium cation showed significant changes in intensity for different anions as well as in aqueous solutions. The area ratio of these two bands followed the order I^?>Br^?>Cl^?>BF₄^? (in terms of the anion X in [BMIM]X), indicating that the butyl chain of [BMIM]I tends to adopt the trans conformation. The butyl chain was found to adopt the gauche conformation upon dilution, irrespective of the anion type. The Raman bands in the butyl C?H stretch region for [BMIM]X (X=Cl^?, Br^?, and I^?) blueshifted significantly with the increase in the water concentration, whereas that for [BMIM]BF₄ changed very little upon dilution. The blueshift in the C?H stretch region upon dilution also followed the order: [BMIM]I>[BMIM]Br>[BMIM]Cl>[BMIM]BF₄, the same order as the above trans conformation preference of the butyl chain in pure imidazolium ionic liquids, which suggested that the cation‐anion interaction plays a role in determining the conformation of the chain.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.