粗糙镍电极上吡啶和二巯基嘧啶的表面拉曼光谱

粗糙镍电极上吡啶和二巯基嘧啶的表面拉曼光谱①黄群健高劲松蔡雄伟毛秉伟郑明森田中群＊（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）自从人们发现和认知表面增强拉曼散射（ＳＥＲＳ）效应以来［１］，ＳＥＲＳ技术以其极高的表面灵敏度为电极...     

表面活性剂阴离子双水相新体系及其对卟啉、染料的萃取

由阴阳离子型表面活性剂水溶液混合形成的双水相［１,２］是水相分离技术中的一个新分支．ＺＨＡＯ等［２］将阴阳离子表面活性剂过量的体系分别称为阴阳离子双水相．由溴化十二烷基三乙铵（Ｃ１２ＮＥ）和十二烷基硫酸钠（ＳＤＳ）组成的阳离子双水相对蛋白质［１］、酶［３］、氨基酸［４］和卟啉［５,６］等的萃取分离已有报道．与阳离子双水相比较,阴离子双水相分相时间慢,其萃取应用研究尚未见报道．本文在详细研究了ＳＤＳ－Ｃ１２ＮＥ阴离子双水相的基础上,将全氟型阴离子表面活性剂全氟辛酸钠（ＳＰＦＯ）引入这类水相分离体系…     

电化学方法研究I3^—和Ti^3＋在铂上的异相催化

用电化学方法研究了Ｉ－３和Ｔｉ３＋在还原铂表面上的电极反应，由此计算出Ｉ－３与Ｔｉ３＋在还原铂表面上的混合催化反应速率（νｍｉｘ）．当混合催化电位（Ｅｍｉｘ）位于极限电流区时，νｍｉｘ对［Ｔｉ３＋］为零级反应，对［Ｉ－３］为一级反应，且正比于电极旋转速率的平方根，Ｈ＋浓度影响不大．由动力学方法研究的结果证实了电化学研究结果的正确性，致使可用电化学方法解释溶液中的异相催化问题     

TiO2纳米粒子膜表面性质的研究

ＴｉＯ_２纳米粒子膜在光催化降解大气和水中的污染物［１］、光电转换［２］、光致变色［３］等方面有广阔的应用前景,近年来受到了科学界的高度重视．研究表明,膜的表面性质对如上应用有着重要影响．本文采用等离子体化学气相沉积法（ＰＥＣＶＤ法）［４］制备了ＴｉＯ２的纳米粒子膜,分别采用ＴｉＣｌ４等离子体或Ｏ２等离子体处理膜表面,获得两种不同表面性质的ＴｉＯ２纳米粒子膜;并利用表面光电压谱（ＳＰＳ）和电场诱导表面光电压谱（ＥＦＩＳＰＳ）技术对膜的表面性质进行具体分析,探讨了其在光催化领域的可能应用．１实验部…     

燃料电池电极制作方法的研究

对燃料电池,性能良好的催化剂至关重要,它决定着大电流密度放电时的性能、成本和运行寿命［１］．但因电极上的反应是气、液、固三相反应,所以必须制备出高效的、结构合理的气体电极［２～３］,减小气相、液相传质阻力,提高三相接触性能,降低电极极化．Ｋ．Ｍｕｎｄ等［４～５］所制作的电极,气体扩散距离长,溶解气体的扩散电阻大．Ｒ．Ｐ．Ｉｃｚｋｏｗｓｋｉ等人［６］用ＰＴＦＥ（ｐｏｌｙｔｅｔｒａｆｌｕｏｒｏｅｔｈｙｌｅｎｅ,聚四氟乙烯）作疏水剂,在整个气体反应层制成气体扩散通道,改善了电极性能．后来,Ｓ．Ｍｏｔ…     

用低能电子衍射研究Ag（001）表面吸附硒的表面结构

用低能电子衍射研究Ａｇ（００１）表面吸附硒的表面结构熊泽珍，刘秀文，白荣（电子科技大学材料科学与工程系成都６１００５４）关键词银吸附硒，表面结构，ＬＥＥＤ谱，能带理论引言Ｉｇｎａｔｉｅｖ等￣［１．２］已观测和计算了清洁Ａｇ（００１）表面吸附硒的ＬＥＥ...     

铱(I)苯乙胺Schiff碱络合物催化苯乙酮的不对称氢转移反应

以光学活性的苯乙胺和吡啶－２－甲醛缩合而得到的Ｓｃｈｉｆ碱（ＰＰＥＩ）（ＰＰＥＩ＝２－［［Ｎ－（１－ｐｈｅｎｙｌｅｔｈｙｌ）ｉｍｉｎｏ］ｍｅｔｈｙｌ］ｐｙｒｉｄｉｎｅ或２－［［Ｎ－（１－苯乙基）亚胺］甲基］吡啶）为配体，进而与［Ｉｒ（ＣＯＤ）Ｃｌ］２（ＣＯＤ＝１，５－环辛二烯）反应，合成了８个光学活性铱络合物，考察了它们在异丙醇存在下催化苯乙酮不对称氢转移反应的光学活性，发现［Ｉｒ（ＣＯＤ）（ＰＰＥＩ）Ｉ］具有较好的立体选择性．其光学产率最高可达３５．７％ｅ．ｅ．．     

末端硫醇化的甲氧基聚乙二醇分子自组装膜电极对碘离子的电化学分析研究

碘离子的测量方法有化学法和电化学方法等多种,电化学方法有离子选择性电极、阴极溶出伏安法等［１,２］,但以上方法易受共存离子的干扰．自组装膜修饰电极具有分子识别功能,因而可用于特定物质的检测［３］．末端硫醇化的聚乙二醇分子在金电极表面形成自组装膜后具有分子识别特性［４］,碘离子和聚乙二醇膜有较好的相容性,可以进入膜内进而到达电极表面进行反应,而其它干扰离子较难进入．因而,该膜电极能用于碘离子测定,检测下限低,并具有较强的抗干扰能力．１　实验部分１．１　试剂及仪器　甲氧基聚乙二醇（ＭＷ＝５０００）等…     

[Ln(EO_2)_3](ClO_4)_3·3H_2O的晶体结构研究

合成了希土高氯酸盐开环冠醚二缩乙二醇（ＥＯ２）晶体，（Ｌｎ＝Ｎｄ，Ｈｏ），测定了结构，文内以Ｎｄ－Ｌ的数据为主要研究对象（方括号内是Ｈｏ－Ｌ的数据）。晶体属单斜晶系，Ｐ２１／ｎ空间群，化学式［Ｌｎ（ＥＯ２）３］（ＣｌＯ４）３·３Ｈ２Ｏ，晶胞参数为：ａ＝１４．１２４（１）［１４．０８７］，ｂ＝１３．９９０（１）［１４．０３９］，ｃ＝１５．２６５（１）［１５．０１４］；β＝９５．７８（１）［９５．６４］°；Ｖ＝３００１．１（６）［２９５５］３；Ｍｒ＝８１５．０１［８３５．７０］；Ｚ＝４；Ｄｃ＝１．８０４［１．８６５］ｇ／ｃｍ３；石墨单色器，μ（ＭｏＫα）＝２．０９［３．０７］ｍｍ－１，最终偏离因子Ｒ＝０．０５５［０．０７４］，ＲＷ＝０．０７１［０．１０９］。研究结果表明晶体具有相同的结构，配位多面体为九配位三帽三棱柱。发现ＥＯ２醚链有绕Ｃ－Ｃ键呈ＳＴＴＳ分布的规律。弱配体高氯酸根不参加配位。     

微波等离子体诱导聚乙烯表面接枝甲基丙烯酸甲酯

聚乙烯（ＰＥ）通常作为性能优良的薄膜材料被广泛使用,但由于其表面能低,导致表面亲水性差,粘结性弱,染色性能、印刷性能等很不理想［１,２］．在高分子材料的各种表面改性方法中,接枝共聚是一种很有效的途径［３～５］．本文探讨了用微波冷等离子体激活聚乙烯表面...     

Electrocatalytical Oxidation and Determination of Dopamine at Redox Polymer/Nafion Modified Electrodes

ABSTRACT

The modified glassy carbon electrodes prepared by simultaneously covering with [Os(bpy)₂(PVP)₁₀Cl]⁺ redox polymer and Nafion film exhibited excellent electrocatalytic activity for the oxidation of dopamine (DA). Dual linear regions between 1.0x10^?8-1.8x10^?5 M and 1.8x10^?5-4.0x10^?4 M with correlation coefficients of 0.998 and 0.995, respectively, were obtained for log-log plots of catalytic current versus DA concentration. The detection limit for DA determination was ca. 5 nM with 3σ. The dual-film modified electrodes eliminated efficiently the interference from AA presence in a 1000-fold concentration ratio and showed excellent reproducibility for the determination of DA. The modified electrodes have been used to determine DA concentration with both cyclic voltammetric and chronoamperometric techniques. Electrocatalytic kinetics have been studied using a rotating disk electrode. Both the addition of Nafion film and an increase in DA concentration resulted in a decrease in the electrocatalytic rate constant. An apparent Michaelis-Menten constant of 1.3 mM and maximum catalytic current of 88μA were evaluated from the chronoamperometric measurements.     

电化学氧化增强金属钴卟啉的自组装研究

应用电化学方法将钴(Ⅱ)卟啉氧化成钴(Ⅲ)卟啉以增强它与4-巯基吡啶(MP)自组装膜的轴向配位作用,从而快速制备了有序钴卟啉自组装修饰电极CoTMPP/MP/Au(E).电化学石英晶体微天平(EQCM)测试证实电化学氧化对钴卟啉膜生长过程的增强作用.Ram an光谱及修饰电极电催化还原氧研究显示,该修饰电极与经过长时间浸渍法得到的CoTMPP/MP/Au(I)修饰电极具有完全相似的有序结构和性质.与直接将钴卟啉吸附在电极表面的CoTMPP/Au修饰电极相比,以巯基吡啶为桥键得到的钴卟啉修饰电极具有更好的电催化活性和稳定性.     

Electrocatalytic Investigations of Cu(II) and Fe(III) Complexes of Salophen Derivative Schiff Bases on the Pencil Graphite Electrode

This present study describes a pencil graphite electrode surface covered with Cu(II) and Fe(III) complexes based on Salophen derivative Schiff bases in acetonitrile solution containing LiClO₄ as a supporting electrolyte. Cyclic voltammetry method was used for the surface modification procedure with 25 cycle at a sweep rate of 50 mV s^?1. Some characterization methods were used to identify of the prepared modified surfaces including cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), Ultraviolet‐visible Spectroscopy (UV‐Vis), and Scanning Electron Microscopy/Energy Dispersive X‐ray Spectroscopy (SEM/SEM‐EDX). The catalytic activity of these modified surfaces on the electrochemical oxidation of catechol (CC) was investigated and they compared with each other. The results demonstrated that these modified electrodes showed perfect electrocatalytic activity on the catechol determination, however the modified electrode prepared with the Cu(II) complex has higher catalytic activity than this prepared with the Fe(III) complex thanks to its the lower detection limit.     

Preparation, characterization, and electrocatalytic activity of surface anchored, Prussian Blue containing starburst PAMAM dendrimers on gold electrodes

Gold bead electrodes were modified with submonolayers of 3-mercaptopropionic acid or 2-aminoethanethiol and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0 and 3.5, respectively) to obtain films on which Prussian Blue (PB) was later absorbed to afford mixed and stable electrocatalytic layers. Experiments carried out with these novel materials not only showed an improved surface coverage of PB on the dendrimer modified electrodes as compared to PB modified gold electrodes prepared under acidic conditions, but also showed an increased stability at neutral pH values for one of the dendrimer containing substrates where the PB film on a bare gold electrode is simply not formed. The dendrimer modified electrodes were also tested as electrocatalytic substrates for the electroxidation of L(+)-ascorbic acid (AA), and it was found that their sensitivity as well as the corresponding detection limits were improved as compared to the voltammetric response of a Au-PB modified electrode. On the basis of UV-visible (UV-vis) spectroscopy and electrochemical experiments, it is suggested that the PB molecules are located within the dendritic structure of the surface attached PAMAM dendrimers.     

Electrochemical sensors and biosensors based on redox polymer/carbon nanotube modified electrodes: A review

The aim of this review is to present the contributions to the development of electrochemical sensors and biosensors based on polyphenazine or polytriphenylmethane redox polymers together with carbon nanotubes (CNT) during recent years. Phenazine polymers have been widely used in analytical applications due to their inherent charge transport properties and electrocatalytic effects. At the same time, since the first report on a CNT-based sensor, their application in the electroanalytical chemistry field has demonstrated that the unique structure and properties of CNT are ideal for the design of electrochemical (bio)sensors. We describe here that the specific combination of phenazine/triphenylmethane polymers with CNT leads to an improved performance of the resulting sensing devices, because of their complementary electrical, electrochemical and mechanical properties, and also due to synergistic effects. The preparation of polymer/CNT modified electrodes will be presented together with their electrochemical and surface characterization, with emphasis on the contribution of each component on the overall properties of the modified electrodes. Their importance in analytical chemistry is demonstrated by the numerous applications based on polymer/CNT-driven electrocatalytic effects, and their analytical performance as (bio) sensors is discussed.     

氧化还原蛋白质在模拟生物膜修饰电极上的直接电化学

评述了氧化还原蛋白在模拟生物膜这种新型的化学修饰电极上的直接电化学研究的进展。对蛋白质在表面活性剂薄膜电极和多层复合薄膜电极上的电化学行为、模拟生物膜的超分子结构以及蛋白质在该类薄膜修饰电极上对不同底物的电催化性质进行了较详细的介绍。     

Nanostructured metal particlemodified electrodes for electrocatalytic and sensor applications

Nanotechnology has become one of the most exciting frontier fields in analytical chemistry. The huge interest in nanomaterials, for example in chemical sensors and catalysis, is driven by their many desirable properties. Although metal is a poor catalyst in bulk form, nanometre-sized particles can exhibit excellent catalytic activity due to their relative high surface area-to-volume ratio and their interface-dominated properties, which significantly differ from those of the bulk material. The integration of metal nanoparticles into thin film of permselective membrane is particularly important for various applications, for example in biological sensing and in electrocatalysis. We have already established different techniques to design permselective membrane-coated chemically modified electrodes with incorporated redox molecules for electrocatalytic, electrochromic and sensor applications. Recently, we have prepared nanostructured platinum and copper (represented M_nano, M = Pt and Cu) modified GC/Nafion electrodes (GC/Nf/M_nano) and characterized by using AFM, XPS, XRD and electrochemical techniques. The nanostructured M_nano modified electrodes were utilized for efficient electrocatalytic selective oxidation of neurotransmitter molecules in the presence of interfering species such as ascorbic acid (AA) and uric acid (UA). It has been also shown that the modified electrodes could be used as sensors for the detection of submicromolar concentrations of biomolecules with practical applications to real samples such as blood plasma and dopamine hydrochloride injection solution. The GC/Cu_nano electrode has been used for catalytic reduction of oxygen.     

Electrochemical Detection of Clenbuterol in Pig Liver at Pyrrole-DNA Modified Boron-doped Diamond Electrode

Introduction Clenbuterol { 4-amino-[( tert-butylamino) meth-yl]-3,5-dichlorobenzyl alcohol hydrochloride} is aβ-agonist drug[1]. It can improve the ratio of muscle tofat when it is administrated with high doses to ani-mals[2,3]. However, the residues of clenbuterol(CL)are toxic to humans, leading to sickness and possibleheart complication[4]. It has been reported that CL iseasy to accumulate in animal livers.Recently, some analytical methods for the detec-tion of CL, such as HPLC[5], GC…     

Poly(3-methylthiophene)/palladium sub-micro-modified sensor electrode. Part II: Voltammetric and EIS studies, and analysis of catecholamine neurotransmitters, ascorbic acid and acetaminophen

Promising voltammetric sensors based on the modification of Pt and poly(3-methylthiophene) (PMT) electrodes with Pd nanoparticles were achieved for the determination of catecholamine neurotransmitters, ascorbic acid and acetaminophen. Electrochemistry of the indicated compounds was studied at these electrodes and interesting electrocatalytic effects were found. Furthermore, simple, easily prepared one electrochemical step Pd-modified Pt electrode (Pt/Pd) is reported for the first time. Cyclic voltammetry (CV) and chronocoulometry (CC) were used for the determination of the apparent diffusion coefficients in different electrolytes at these electrodes and the values are in the range from 10⁻⁴ to 10⁻⁵ cm² s⁻¹. Furthermore, it was found that the method of polymer formation had a substantial effect on the synergism between the polymer film and the loaded metal particles towards the oxidation of dopamine (DA) in different supporting electrolytes. This was confirmed by the CV, CC and EIS (electrochemical impedance spectroscopy) as well as SEM (Scanning Electron Microscopy) results. Pt and PMT electrodes modified with Pd nanoparticles showed excellent results for the simultaneous determination of tertiary and quaternary mixtures of the studied compounds.     

Ruthenium and ruthenium dioxide-modified graphite-ethylene/propylene/diene and graphite-Teflon composite electrodes as amperometric flow detectors. Application to the determination of methionine

The flow injection amperometric performance of solid composite graphite electrodes with ethylene/propylene/diene (EPD) or Teflon as binding agents, and with Ru or RuO2 particles as electrocatalytic modifiers has been compared. Both, Ru and RuO2 modified electrodes exhibited electrocatalytic properties on the methionine oxidation process in alkaline media. The electrodes composition and the hydrodynamic and chemical variables were optimized. Graphite-EPD (GEPD) electrodes showed a better analytical performance than graphite-Teflon (GPTFE) electrodes. Furthermore, a better sensitivity, repeatability and reproducibility was observed for RuO2-GEPD electrodes when compared with Ru-GEPD electrodes. At an applied potential of +0.50 V, a detection limit for methionine of 4.8x10(-5) mol L(-1), similar to those reported in the literature for other RuO2-modified electrodes, was obtained. The analytical applicability of RuO2-GEPD electrodes was demonstrated by determining methionine in a complex pharmaceutical formulation.