钢纤维混凝土的层裂特征

利用大直径Hopkinson压杆作为实验设备,通过试件后面的吸收杆应变波形分析了钢纤维增强混凝土的层裂特征。实验结果表明,钢纤维混凝土的层裂强度与钢纤维含量、混凝土压缩强度以及加载速率有关,并给出了经验公式。和素混凝土相比,钢纤维混凝土具有更高的层裂强度和更好的阻止损伤演化和裂纹扩展的能力。高速摄影结果表明,钢纤维混凝土层裂时,层裂段的飞离是由于陷在层裂段中应力波的动量效应,而且在层裂段中不易出现再次层裂的现象。这些现象和相同加载条件下素混凝土的层裂破坏有明显差别,说明钢纤维可以很好地提高混凝土抗层裂能力,其结论对相关的数值模拟和防护工程设计有重要意义。     

混凝土层裂强度测量的新方法

提出了利用Hopkionson压杆测量混凝土层裂强度的新实验方法:用高聚物材料取代传统的金属材料透射杆,混凝土试件为细长杆,由于高聚物波阻抗比混凝土小,试件中压缩波在试件/吸收杆界面反射后形成拉伸波使试件产生层裂破坏,通过吸收杆上透射波形可以确定混凝土层裂强度。由于波在粘弹性材料中的弥散效应,吸收杆中透射波形会发生变化,但三维有限元分析表明,在利用吸收杆上透射波确定混凝土层裂强度时弥散产生的影响可以忽略。按照一维特征线理论,可以由吸收杆上的应变波形确定出混凝土材料的层裂强度。     

基于三维Hopkinson杆的混凝土动态力学性能研究

混凝土、岩石类材料在复杂应力状态下的动态力学性能研究一直备受关注,但鉴于动态实验的复杂性,对真三轴应力状态下材料的动态加载一直未曾实现。本文中研制了一套真三轴静载作用下混凝土、岩石类材料的“三维Hopkinson杆”动态力学实验系统,为冲击载荷作用下材料动态各向异性特性的研究提供了一种有效的实验测试技术。该系统采用液压伺服控制对立方体试件施加三向独立的0~100 MPa真三轴静载,再利用分离式Hopkinson压杆对试件施加冲击动载,具体研究了C30混凝土材料在不同真三轴静载条件下的动态压缩性能,得到了不同条件下X、Y、Z方向上的动态应力应变关系。     

直撞式霍普金森压杆二次加载技术

利用传统分离式霍普金森压杆（split Hopkinson pressure bar, SHPB）实验技术来实现试件在较低应变率下的大变形时,需要使用超长的压杆系统,杆件的加工和实验空间限制了该技术的推广应用。鉴于此,提出一种直撞式霍普金森压杆二次加载实验技术,利用透射杆中的应力波在其末端的准刚性壁反射实现对试件的二次加载,并分析了准刚性质量块尺寸对二次加载的影响规律;采用二点波分离方法对叠加的应力波进行了有效分离和计算,在总长4 m的压杆系统中实现了1.2 ms的长历时加载,并可以准确获得试件的加载应变率曲线和应力应变关系。建立了直撞式霍普金森压杆二次加载有限元模型,数值仿真结果表明,该实验技术能有效地实现试件的二次加载,与超长SHPB系统获得的仿真结果相比较,两者的试件应力应变关系完全一致。利用该技术对1100铝合金材料进行动态压缩实验,实现了其在102 s?1量级应变率下的大变形动态力学性能测试。     

改进的霍普金森压杆技术在聚氨脂泡沫塑料动态力学性能研究中的应用

用改进的霍普金森杆技术得到了聚氨脂泡沫塑料在动态应力均匀和恒应变率条件下的实验结果。     

分离式Hopkinson压杆实验技术研究进展

分离式Hopkinson压杆(split Hopkinson pressure bar, SHPB)技术是一种广泛应用于研究材料加载应变率在($10^{2}\sim 10^{4}{\rm s}^{- 1}$)范围内力学响应的实验方法. 在详细介绍Hopkinson, Davies和Kolsky的3篇经典论文的基础上, 从基本理论研究、加载波形控制、复合加载方式以及测试系统改进4个方面详细论述SHPB实验技术的研究进展. 通过分析SHPB实验技术在实际应用中存在的问题, 提出SHPB标准化、拓宽应用范围以及广义SHPB技术是SHPB实验技术研究值得深入探索的方向.     

An Experimental Technique for Spalling of Concrete

The spalling strength of concrete is measured by examining the strain wave profiles in a polymer buffer bar behind the slender concrete bar specimen placed between a large diameter (Φ100 mm) Hopkinson bar and the buffer bar. The experimental results indicate that the spalling strength is related to not only the compressive strength of concrete but also the impact velocities (the loading rates). The rate effect of spalling strength mainly results from the different cracking paths in concrete under different impact velocities. However when the input compressive stress to specimen exceeds the threshold required to trigger the compressive damage, the spalling strength decreases due to the evolution and cumulation of compressive damage in concretes. The repeated impact loading experiments indicate that damage plays an important role in the spallation process of concrete. The high speed video of the spalling fracture process shows that multiple spalling fractures may occur in the scab and damage accumulation resulting from stress wave propagation in scab is the main reason for the producing of multiple spallations.     

Influence of desert sand on the mechanical properties of concrete subjected to impact loading

A74-mm-diameter Split Hopkinson pressure bar was used to carry out the dynamic compression experiment of concrete made of desert sand.The dynamic failure processes of concrete different in specimen size,impact velocity,desert sand replacement ratio,size and volume content of coarse aggregate were simulated.Research results showed that concrete made of desert sand had size-effect and was rate-dependent.The peak stress of concrete made of desert sand declined with the minimum size of coarse aggregate.However,the peak stress of concrete made of desert sand increased first,and then declined with the volume content and maximum size of coarse aggregate.     

用于脆性材料的Hopkinson压杆动态实验新方法

岩石、陶瓷或混凝土等脆性材料,在用Hopkinson压杆对其实施高应变率加载实验时,由于其破坏应变很小,试件通常在加载入射波的波头部分（含初始上升沿和较大的弥散振荡部分）就已破坏失效,因此采用常规的实验或数据处理方法很难得到精确有效的实验结果,本文提出的Hopkinson压杆装置预留间隙实验法能使加载入射波波幅振荡明显减且初始上升时间为零,有效地减小了弹性波弥散带来的误差,使贴于压杆中部的应变片测得的信号经处理后很大程度上直接反映的是试件端面的实际受力状态,且由于避免了试件在加载波上升沿段的稳定受力而使应变率历史曲线更趋于恒定,这为提高Hopkinson压杆装置的实验精度,特别是为脆性材料提供了一种实施高应变率实验的实用可行的途径。     

骨料对混凝土材料冲击压缩行为的影响

利用大尺寸Hopkinson压杆，以实验数据为依据，研究了四种不同骨料尺寸的普通混凝土材料和两种不同配比的钢纤维增强混凝土材料在冲击载荷下的压缩强度，从唯象的角度分析了骨料性质及其粒径对混凝土材料动态压缩性能的影响及可能的力学机理，为在工程上更好地利用混凝土材料提供一定的理论和实验的支持。     

混凝土高温动态压缩力学性能实验

利用一种新的快速加热混凝土的方法和SHPB实验系统对自制混凝土进行了不同温度下的动态 压缩初步实验,发现了混凝土在高温下的动态压缩力学性能的规律性:在高温动态压缩条件下,温度变化是影 响混凝土力学性能的主要因素,应变率的影响是次要因素。另外,该混凝土高温动态压缩破坏可以分为2种 模式(裂纹模式和破碎模式)     

应力平衡和接触状态在Hopkinson杆测试聚合物动态弹性模量中的影响研究

针对用Hopkinson杆试验能否准确测量聚合物动态弹性模量以及其中主要影响因素的问题,本文基于重构试样初始加载阶段的应力波反射透射过程,分别计算了6个特征时间内的前三次反射波和透射波,得到试样的应力平衡度和试样的应力应变曲线。对于所研究的聚合物材料,通过比较重构的应力应变曲线的弹性模量与输入的材料弹性模量,发现在4个特征时间后,误差仅在3%左右。因此试样变形过程中的应力平衡与否不是材料在Hopkinson杆试验中弹性模量测不准的原因。通过环氧树脂试样试验发现,根据Hopkinson杆理论计算的应变结果要大于试样上应变片实测的结果,误差在11%左右。相应的数值模拟研究发现:试样和杆子端面接触状态直接决定着试样弹性模量测量的精度。关于惯性效应和压痕效应的研究也证实它们的影响是可以忽略的。     

High-rate Characterization of 304L Stainless Steel at Elevated Temperatures for Recrystallization Investigation

An integrated experimental technique was developed for high-rate mechanical characterization of 304L stainless steel at elevated temperatures by using a modified split Hopkinson pressure bar (SHPB). A sandwich structure consisting of two platens and the specimen in between was heated before mechanical loading while the bars were maintained at room temperature to eliminate the temperature gradient effect on the wave propagation in the bars. Upon contacting the cold bars, temperature gradients form in the platens, leaving the temperature in specimen constant and uniform. Pulse shaping techniques were employed to maintain constant strain-rate deformation and dynamic stress equilibrium in the specimen. Dynamic compressive stress-strain curves at elevated temperatures for the 304L stainless steel were obtained. To relate recrystallization to impact loading, a momentum trapping system was employed to apply a single loading on the specimen during one dynamic experiment. We also controlled the quenching time to study its effect on recrystallization.     

套管式Hopkinson冲击拉伸实验相关问题的探讨

基于套管式Hopkinson冲击拉伸实验装置,对板状、棒状材料的冲击拉伸试验进行了简要介绍,重点讨论和解决材料冲击拉伸试验过程中出现的一些问题。通过提出的一种辅助式螺母连接方法,改进了棒状材料试件连接装置,解决了棒状试件试验过程中因连接拧紧度对实验结果的影响;通过建立其有限元模型,运用ABAQUS软件数值模拟分析入射杆端部拉伸螺母厚度对入射波形的影响,给出合理选择拉伸螺母的依据。     

A quartz-crystal-embedded split Hopkinson pressure bar for soft materials

A dynamic experimental technique that is three orders of magnitude as sensitive in stress measurement as a conventional split Hopkinson pressure bar (SHPB) has been developed. Experimental results show that this new method is effective and reliable for determining the dynamic compressive stress-strain responses of materials with low mechanical impedance and low compressive strengths, such as elastomeric materials and foams at high strain rates. The technique is based on a conventional SHPB. Instead of a surface strain gage mounted on the transmission bar, a piezoelectric force transducer was embedded in the middle of the transmission bar of a high-strength aluminum alloy to directly measure the weakly transmitted force profile from a soft specimen. In addition, a pulse-shape technique was used for increasing the rise time of the incident pulse to ensure stress equilibrium and homogeneous deformation in the low-impedance and low-strength specimen.     

微型Hopkinson杆技术

介绍了一种可对材料进行更高应变率动态性能实验的微型Hopkinson杆技术,对金属材料其应变可超过104 s-1。使用激光径向位移测试仪和与传统Hopkinson杆对比实验,对微型Hopkinson杆技术的有效性进行了验证。实验结果表明,微型Hopkinson杆确定的试样应变与激光径向位移测试的结果相当吻合;在低应变率范围内,与传统Hopkinson杆的实验结果有很好的一致性。从而证明了微型Hopkinson杆技术可进行应变率在104 s-1以上材料的动态力学性能实验。     

波分离技术在混凝土冲击压缩试验中的应用

介绍了SHPB实验中的波分离技术基本原理,该方法利用两相距很近应变计测量信号分离重叠的入射波和反射波。由于两应变计的距离很近,在弹性杆可以忽略应力波传播的弥散。由于应变计的位置可以非常接近试样,减少了实验中因应力波弥散产生的误差。利用该方法对混凝土进行了冲击压缩实验研究,得到了混凝土的动态应力-应变关系。讨论了测量误差导致波分离技术的误差。     

A split Hopkinson bar technique for low-impedance materials

An experimental technique that modifies the conventional split Hopkinson pressure bar has been developed for measuring the compressive stress-strain responses of materials with low mechanical impedance and low compressive strengths such as elastomers at high strain rates. A high-strength aluminum alloy was used for the bar materials instead of steel, and the transmission bar was hollow. The lower Young's modulus of the aluminum alloy and the smaller cross-sectional area of the hollow bar increased the amplitude of the transmitted strain signal by an order of magnitude as compared to a conventional steel bar. In addition, a pulse shaper lengthened the rise time of the incident pulse to ensure stress equilibrium and homogeneous deformation in the low-impedance specimen. Experimental results show that the high strain rate, compressive stress-strain behavior of an elastomeric material can be determined accurately and reliably using this technique.     

用HJC本构模型模拟混凝土SHPB实验

运用Holmquist-Johnson-Cook (HJC) 本构模型对混凝土的SHPB实验进行了数值模拟。解决了罚函数算法中罚因子合理数值的选取问题。利用模拟结果按SHPB两波法重构了试样的应力应变曲线。分析了混凝土材料的SHPB实验得到应力应变曲线的有效段范围和各段的力学规律。通过比较实际混凝土材料SHPB实验和数值模拟得到的应力应变曲线,发现两者体现的力学行为很相似,即HJC模型是描述该类材料的一种合理本构模型。模拟了试样不同平行度公差下的SHPB实验,发现在一定应变率范围内其影响程度远大于试样应力(应变)不均匀性。     

A New Testing Method to Investigate the Compacting Behaviour of Fresh Concretes Under Impact Loading

This paper presents a new instrumented Proctor test using a Hopkinson bar which allows for the original measurement of forces and velocities during the impact loading on soft fresh concrete samples. For this purpose, the specific points of using low impedance Nylon bar as well as the two-point measurement method to recover coupled waves are discussed. The whole test consists of successive impacts of low velocity (less than 3 m/s) exerted on the compressible specimen of a fresh concrete. The proposed original measurement allows for a quantitative comparison of the behaviour of the fresh concrete submitted to quasi-static and impact compaction. It shows that impact compaction is more efficient than quasi-static case. However, the increase of the impact velocity seems to reduce the efficiency. There exists probably an optimal loading path. The further understanding of the behaviour of fresh concrete under low velocity impact should be an interesting way to improve the industrial compacting process.